112133

11/27/01 5:29 PM Page 67 BNC COAXIAL CONNECTORS The Connex BNC connectors are made to a high quality level. Medium size coaxial connectors with bayonet lock. 50 ohm impedance for applications up to 4 GHz and 75 ohm impedance up to 2 GHz. 75 OHM SERIES Within the internationally standardized BNC mating face dimensions, a perfect 75 ohm characteristic impedance cannot be realized. However, at frequencies up to 1000 MHz, the small impedance deviation is negligible for practical applications. Connex true 75 ohm connectors with a typical VSWR reading of 1.06:1 at 2000 MHz are identified by an asterisk following the part number. All 75 ohm BNC connectors and 50 ohm BNC connectors are intermateable without restrictions. Note: Silverplated bodies are available by adding “S” to end of part number. Nexcote (white bronze) plating with no nickel under body or center contact is available by adding “NEX” to end of part number. ELECTRICAL SPECIFICATIONS Impedance 50 ohm 75 ohm Frequency Range 0–4 GHz 0–1 GHz Working Voltage 500 Volts rms. 500 Volts rms. Dielectric Withstanding Voltage 1500 Volts rms. 1500 Volts rms. VSWR 1.3 max. 0–4 GHz 1.05+0.1f(GHz) DC to 1 GHz Contact Resistance Center contact 1.5 milliohm Center contact 1.5 milliohm Outer contact 1.0 milliohm Outer contact 1.0 milliohm 5000 megohms (min) 5000 megohms (min) Insulation Resistance MATERIAL SPECIFICATIONS PARTS NAME MATERIAL FINISH Center Male Brass Gold or Silver plated Contact Female Phosphor Bronze (nominal) or Gold or Silver plated Beryllium Copper Metal parts Brass Nickel* Insulators Teflon, Delrin, PBT polyester None Clamp gaskets Silicone rubber, Synthetic rubber None Crimp ferrule Annealed copper Nickel* 67 BNC COAXIAL CONNECTORS BNC.4 BNC COAXIAL CONNECTORS BNC.4 11/27/01 5:29 PM Page 68 BNC COAXIAL CONNECTORS INTERFACE MATING DIMENSIONS PLUG Letter A Millimeters [Inches] Minimum Maximum 9.78 [.385] 9.91 [.390] B FLARED TO MEET GOOD ELECTRICAL CONTACT C D E F L N P Q R 4.83 1.32 5.33 0.15 0.08 – 5.28 1.98 2.06 [.190] [.052] [.210] [.006] [.003] [.208] [.078] [.081] – 1.37 5.84 0.46 1.02 0.64 5.79 – 2.21 [.054] [.230] [.018] [.040] [.025] [.228] [.087] JACK Letter A B C D E F G H I J K L M N P R S Millimeters Minimum 10.97 [.432] 9.60 [.378] 8.31 [.327] 8.10 [.319] – 5.18 [.204] 8.31 [.327] 1.91 [.075] 4.78 [.188] 4.72 [.186] – 4.95 [.195] 2.06 [.081] 8.79 [.346] – 0.38 [.015] 10.52 [.414] [Inches] Maximum 11.07 [.436] 9.70 [.382] 8.46 [.333] 8.15 [.321] 4.72 [.186] 5.28 [.208] 8.51 [.335] 2.06 [.081] 5.28 [.208] 5.23 [.206] 0.15 [.006] – 2.21 [.087] 9.04 [.356] 6.50 [.256] 0.76 [.030] – NOTE 1: I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH 1.32/1.37 MM DIA. PIN. 68 11/27/01 5:29 PM Page 69 BNC COAXIAL CONNECTORS All connector bodies, unless otherwise noted, are nickel plated. Center contacts are 3µ" gold plated. Insulators are Delrin, unless otherwise noted. Silver plating and Teflon insulators are available on virtually all BNC connectors. Please contact Connex for samples and quotes. All dimensions in millimeters and [inches]. 01 01A 01B 02 03 03A 04 04A 05 05A 06 C A B L E 58/ 58A/ 58C/ 141/ 303/ LMR195™/ B7806A 55/ 142/ 223/ 400 LMR200™/ B7807A 58 PLENUM/THINNET/ 122U/ B88240/ B89907 59/ 62/ 140/ 210 59/ U-20AWG 59/ U PLENUM 59/ U PLENUM-20AWG 174/ 188A/ 316/ B7805A 316/ U DOUBLE BRAIDED 179/ 187/ B9221 G 06A 07 07A 07B 07C R O U P L 179/ U DOUBLE BRAIDED 8/ 8A/ 213/ 393 214 8X/ LMR240™/ B7808A B9913/ LMR400™/ B7810A/ B8214 07D B89913 07E 11 07F 11/ U-14AWG/ B8213/ B9292/ B7731/ B1859A 08 6/ 143/ 212 08A B1694A/ B9248 08B 6 PLENUM/ B1695A E G 09 10 11 12 13 14 15 15A 16 17 18 19 E N D B8227/ 89207 .141 SEMI-RIGID/ 402/U .085 SEMI-RIGID/ 405/U .250 SEMI-RIGID .047 SEMI-RIGID/ B1674A 178/ 196 B8281/ B9231/ B9141 B88281 180/ 195/ 122/ B8218/ B1865A/ B1855 LMR6OO™ AT&T734A/ B1505A AT&T735A/ B735A1 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE BNC COAXIAL CONNECTORS BNC.4 STRAIGHT CRIMP PLUG — SINGLE CRIMP Cable Group Finish Diecast shell 112108 01 112110 03 112112 02 112114 04 Nickel Nickel Nickel Nickel P.N. Insulation Impedance Delrin Delrin Delrin Delrin 50 50 50 50 Crimp Tool E E E E Remark: Only for Solid Center Conductor Cable STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — STANDARD CABLE P.N. Cable Group Brass Shell 112116 01 112514 01A 112597 01B 112118 03 112119 03 112952* 03 112507 03A 112956* 03A 112650 Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Teflon Delrin Delrin Teflon Delrin Teflon 50 50 50 50 75 75 75 75 Crimp Tool A A A A A A A A — Nickel Teflon 75 A COMMSCOPE F59 HEC-2/B1186A CABLE 112562 07 Nickel 112589 07A Nickel 112533 07B Nickel 112563 07C Nickel 112627 07D Nickel 112576 07E Nickel 112669 07E Nickel 112606 07F Nickel 112508 08 Nickel 112565 08A Nickel 112957* 08A Nickel 112519 08B Nickel 112958* 08B Nickel 112509 15 Nickel 112953* 15 Nickel 112625 15A Nickel 112951* 18 Nickel 112950* 19 Nickel 112700 LMR300™ Nickel Teflon Teflon Delrin Teflon Teflon Teflon Teflon Teflon Delrin Delrin Teflon Delrin Teflon Delrin Teflon Delrin Teflon Teflon Teflon 50 50 50 50 50 75 50 75 75 75 75 75 75 75 75 75 75 75 50 D D A L L D D D E E H E E E E E A B D/E Diecast Shell 112120 01 112122 03 112123 03 Delrin Delrin Delrin 50 50 75 A A A Nickel Nickel Nickel *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 69 BNC.4 11/27/01 5:29 PM Page 70 BNC COAXIAL CONNECTORS PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — PLENUM CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool Brass Shell 112124 02 Nickel 112127 04 Nickel 112544 04A Nickel Delrin Delrin Delrin 50 75 75 A A A Diecast Shell 112128 02 Delrin 50 A Nickel STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — MINIATURE CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool Brass Shell 112132 05 112512 05A 112133 06 112644 06A 112516 14 112521 16 112955* 16 112975* 04A Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Delrin Teflon Teflon 50 50 75 75 50 75 75 75 B B B B B B B B Diecast Shell 112134 05 112135 06 Nickel Nickel Delrin Delrin 50 75 B B Remark: With teflon sleeve/Hex crimp size.178" *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp STRAIGHT SOLDER PLUG — SEMI-RIGID CABLE P.N. Cable Group Finish Insulation Impedance 112551 10 Nickel/Gold Teflon 112520 10 Nickel/Gold Teflon 112552 11 Nickel/Gold Teflon 50 75 50 Crimp Tool N/A N/A N/A 112551 112552 70 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 71 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 STRAIGHT CRIMP PLUG — PIN-IN-PIN — MINIATURE CABLE Cable Group Finish Brass Shell 112136 05 112137 06 Nickel Nickel Delrin Delrin 50 75 B B Diecast Shell 112138 05 112139 06 Nickel Nickel Delrin Delrin 50 75 B B P.N. Insulation Impedance Crimp Tool Remark: Hex. crimp size .128" Ferrule Crimp Tool Crimped Size .128" Tool No. 47-10150 4–Way Indent Crimp Tool No. 47001 STRAIGHT CRIMP PLUG — MINIATURE CABLE Cable Group Finish Brass Shell 112140 06 Nickel TPX 75 B Diecast Shell 112142 06 Nickel TPX 75 B P.N. Insulation Impedance Crimp Tool Remark: TPX Insulator/75 ohm AVAILABLE ONLY For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 71 BNC.4 11/27/01 5:29 PM Page 72 BNC COAXIAL CONNECTORS RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 RIGHT ANGLE CRIMP/SOLDER PLUG — STANDARD CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool Brass Shell 112162 01 112526 01A 112599 01B 112164 03 112165 03 112960* 03 112467 01 112470 03 112594 07 112595 07A 112601 07B 112596 07C 112961* 18 112962* 19 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Teflon Delrin Delrin Teflon Teflon Teflon Teflon Teflon Delrin Delrin Teflon Teflon 50 50 50 50 75 75 50 75 50 50 50 50 75 75 A A A A A A A A D D A D A B Diecast Shell 112166 01 112168 03 112169 03 Nickel Nickel Nickel Delrin Delrin Delrin 50 50 75 A A A Remark: Cable Center Conductor Solder to pin directly *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp RIGHT ANGLE CRIMP/SOLDER PLUG — PLENUM CABLE Cable Group Finish Brass Shell 112170 02 112173 04 Nickel Nickel Delrin Delrin 50 75 A A Diecast Shell 112174 02 112177 04 Nickel Nickel Delrin Delrin 50 75 A A P.N. Insulation Impedance Crimp Tool Remark: Cable Center Conductor Solder to pin directly RIGHT ANGLE CRIMP/SOLDER PLUG — MINIATURE CABLE P.N. Cable Group Brass Shell 112178 05 112528 05A 112179 06 112646 06A 112588 16 Finish Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin 50 50 75 75 75 Crimp Tool B B B B B Remark: Cable Center Conductor Solder to pin directly 72 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 73 RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 RIGHT ANGLE SOLDER PLUG — SEMI-RIGID CABLE P.N. Cable Group Finish Insulation Impedance 112617 10 Nickel/Gold Teflon 112614 11 Nickel/Gold Teflon 50 50 Crimp Tool N/A N/A RIGHT ANGLE CRIMP/CRIMP PLUG — STANDARD CABLE P.N. Cable Group Brass Shell 112182 112184 112185 112540 112539 Finish Insulation Impedance Crimp Tool 01 03 03 08 15 Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Teflon Teflon 50 50 75 75 75 A A A E A Diecast Shell 112186 01 112189 03 Nickel Nickel Delrin Delrin 50 75 A A Remark: Crimp/Crimp Type RIGHT ANGLE CRIMP/CRIMP PLUG — PLENUM CABLE Cable Group Finish Brass Shell 112190 02 112193 04 Nickel Nickel Delrin Delrin 50 75 A A Diecast Shell 112194 02 112197 04 Nickel Nickel Delrin Delrin 50 75 A A P.N. Insulation Impedance Crimp Tool Remark: Crimp/Crimp Type RIGHT ANGLE CRIMP/CRIMP PLUG — MINIATURE CABLE Cable Group Finish Brass Shell 112198 05 112199 06 Nickel Nickel Delrin Delrin 50 75 B B Diecast Shell 112200 05 112201 06 Nickel Nickel Delrin Delrin 50 75 B B P.N. Insulation Impedance Crimp Tool Remark: With teflon sleeve Hex. crimp size .178" Crimp/Crimp Type For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 73 BNC.4 11/27/01 5:29 PM Page 74 BNC COAXIAL CONNECTORS JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 STRAIGHT CRIMP JACK — STANDARD CABLE Cable Group P.N. Finish Insulation Impedance Crimp Tool Captured 112144 01 Nickel Teflon 50 A 112148 01 Nickel Delrin 50 A 112513 01A Nickel Delrin 50 A 112598 01B Nickel Teflon 50 A 112146 03 Nickel Teflon 50 A 112147 03 Nickel Teflon 75 A 112150 03 Nickel Delrin 50 A 112649 03A Nickel Teflon 75 A 112605 07B Nickel Teflon 50 A 112603 07C Nickel Teflon 50 D 112965* 08A Nickel Teflon 75 H 112966* 08B Nickel Teflon 75 E 112628 15 Nickel Teflon 75 E 112973* 18 Nickel Teflon 75 A 112974* 19 Nickel Teflon 75 B *Center contact .052" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp STRAIGHT CRIMP JACK — PLENUM CABLE Cable Group P.N. Finish Insulation Impedance Teflon/Captured 112152 02 Nickel 112155 04 Nickel 112645 04A Nickel Teflon Teflon Teflon 50 75 75 Crimp Tool A A A STRAIGHT CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE Cable Group P.N. 112160 112529 112161 112647 112618 112615 112631 112559 Finish Insulation Impedance 05 Nickel 05A Nickel 06 Nickel 06A Nickel 10 Nickel/Gold 11 Nickel/Gold 14 Nickel 16 Nickel Delrin Teflon Delrin Delrin Teflon Teflon Delrin Delrin 50 50 75 75 50 50 50 75 Crimp Tool B B B B N/A N/A B B Remark: With teflon sleeve, Hex crimp size .178" BULKHEAD CRIMP JACK — SNAP-IN PANEL P.N. Cable Group 112636 74 05 Finish Nickel Insulation Impedance Teflon 50 Crimp Tool B For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 75 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 BULKHEAD CRIMP JACK — STANDARD CABLE P.N. Cable Group Teflon/Captured 112202 01 112505 01A 112600 01B 112204 03 112205 03 112630 03A 112602 07B 112604 07C 112662 08A 112982• 08A 112593 08B 112629 15 Finish Insulation Impedance Crimp Tool Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon Teflon 50 50 50 50 75 75 50 50 75 75 50 75 A A A A A A A L E E E E Delrin/Non Captured 112206 01 Nickel 112208 03 Nickel 112209 03 Nickel Delrin Delrin Delrin 50 50 75 A A A Remark: 3.5 [.138] Max. panel thickness *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp BULKHEAD CRIMP JACK — STANDARD CABLE P.N. Cable Group Finish Teflon/Captured 112210 01 Nickel 112213 03 Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool A A Remark: 6.5 [.256] Max. panel thickness BULKHEAD CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Teflon/Captured 112218 02 Nickel 112221 04 Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool A A Remark: 3.5 [.138] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 75 BNC.4 11/27/01 5:29 PM Page 76 BNC COAXIAL CONNECTORS BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Teflon/Captured 112226 02 Nickel 112229 04 Nickel Insulation Impedance Teflon Teflon Crimp Tool 50 75 A A Remark: 6.5 [.256] Max. panel thickness BULKHEAD CRIMP JACK — MINIATURE CABLE P.N. Cable Group 112234 112517 Finish Insulation Impedance Crimp Tool 05 Nickel 05A Nickel Delrin Delrin 50 50 B B 112635 05A Nickel FRONT MOUNT Teflon 50 C 112235 Nickel Delrin 75 B 112654 06 Nickel FRONT MOUNT Teflon 75 B 112648 06A Nickel 112522 14 Nickel 112568 16 Nickel 112970* 18 Nickel 112969* 19 Nickel Delrin Delrin Teflon Teflon Teflon 75 50 75 75 75 B B B A B 06 *Center contact .052" diameter, 30µ" Au, true 75 ohm. Use .044 Hex. crimp or 12-indent crimp. 112587 05 Nickel FRONT MOUNT Teflon 50 B 112634 05A Nickel FRONT MOUNT Teflon 50 C 112587, 112634 Remark: With teflon sleeve, Hex. crimp size .178", 3.5 [.138] Max. panel thickness BULKHEAD SOLDER JACK — SEMI-RIGID CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool 112581 10 Nickel/Gold Teflon 112580 11 Nickel/Gold Teflon 50 50 N/A N/A 112609 11 Nickel/Gold Teflon FRONT MOUNT 50 N/A 112632 11 Nickel/Gold Teflon FRONT MOUNT 75 N/A 76 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 77 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 BULKHEAD ISOLATED CRIMP JACK — STANDARD CABLE P.N. Cable Group Teflon/Captured 112236 01 112652 01A 112238 03 112239 03 Finish Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon 50 50 50 75 Crimp Tool A A A A Remark: 6.0 [.236] Max. panel thickness BULKHEAD ISOLATED CRIMP JACK — PLENUM CABLE P.N. Cable Group 112244 112247 02 04 Finish Nickel Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool A A Remark: 6.0 [.236] Max. panel thickness BULKHEAD ISOLATED CRIMP JACK — MINIATURE CABLE P.N. Cable Group 112252 112253 05 06 Finish Nickel Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool B B Remark: 6.0 [.236] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 77 BNC.4 11/27/01 5:29 PM Page 78 BNC COAXIAL CONNECTORS PANEL JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE/RECEPTACLE For Cable Group Legend, see page 69 PANEL CRIMP JACK — STANDARD CABLE P.N. Cable Group Teflon/Captured 112272 01 112527 01A 112274 03 112275 03 Finish Insulation Impedance Nickel Nickel Nickel Nickel Teflon Delrin Teflon Teflon 50 50 50 75 Crimp Tool A A A A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Insulation Impedance Teflon/Captured 112280 02 Nickel 112283 04 Nickel Teflon Teflon 50 75 Crimp Tool A A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE P.N. Cable Group 112288 112530 112289 112619 112616 Finish Insulation Impedance 05 Nickel 05A Nickel 06 Nickel 10 Nickel/Gold 11 Nickel/Gold Delrin Delrin Delrin Teflon Teflon 50 50 75 50 50 Crimp Tool B B B N/A N/A Remark: 5.0 [.197] Max. panel thickness 78 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 79 CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 STRAIGHT CLAMP PLUG — CAPTIVE CONTACT P.N. Cable Group Brass shell 112332 112334 112335 112531 112558 112657 01 03 03 07 07E 07F Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Teflon Teflon Teflon 50 50 75 50 75 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: Barrel O.D. = 12.5 mm STRAIGHT CLAMP PLUG — CAPTIVE CONTACT P.N. Cable Group Brass Shell 112348 112350 112351 112477 Finish Insulation Impedance Crimp Tool 01 03 03 06 Nickel Nickel Nickel Nickel Delrin Delrin Delrin Teflon 50 50 75 75 N/A N/A N/A N/A Diecast Shell 112352 01 112354 03 Nickel Nickel Delrin Delrin 50 50 N/A N/A Remark: UG-88/U, UG-260/U RIGHT ANGLE CLAMP PLUG P.N. Cable Group Brass Shell 112356 112358 112359 112360 112362 112363 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A STRAIGHT CLAMP JACK — CAPTIVE CONTACT P.N. Cable Group 112372 112374 112375 112376 112378 112379 112642 01 03 03 02 04 04 07 Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon Teflon Teflon Teflon 50 50 75 50 50 75 50 Crimp Tool N/A N/A N/A N/A N/A N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 79 BNC.4 11/27/01 5:29 PM Page 80 BNC COAXIAL CONNECTORS CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BULKHEAD CLAMP JACK — CAPTIVE CONTACT P.N. Cable Group 112577 112612 112613 01 05 06 Finish Insulation Impedance Nickel Nickel Nickel Teflon Teflon Teflon 50 50 75 Crimp Tool N/A N/A N/A TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE TWIST–ON PLUG P.N. Cable Group Brass Shell 112292 112294 112295 112296 112298 112299 112485 Finish Insulation Impedance Crimp Tool 01 03 03 02 04 04 08 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 75 N/A N/A N/A N/A N/A N/A N/A Diecast Shell 112300 01 112302 03 112303 03 112486 08 Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin 50 50 75 75 N/A N/A N/A N/A Remark: Only for solid center conductor cable TWIST-ON JACK P.N. Cable Group 112308 112310 112312 112314 01 03 02 04 Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 50 50 50 Crimp Tool N/A N/A N/A N/A Remark: Only for solid center conductor cable 80 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 81 TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 RIGHT ANGLE TWIST–ON PLUG Cable Group Finish Diecast Shell 112324 01 112326 03 112327 03 112328 02 112330 04 Nickel Nickel Nickel Nickel Nickel P.N. Insulation Impedance Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 Crimp Tool N/A N/A N/A N/A N/A Remark: Only for solid center conductor cable WEDGE COMPRESSION ATTACHMENTS FOR FLEXIBLE CABLE WEDGE COMPRESSION PLUG P.N. Cable Group Brass Shell 112380 112382 112383 112384 112386 112387 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: With wedge pin WEDGE COMPRESSION JACK P.N. Cable Group 112396 112398 112399 112400 112402 112403 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon Teflon Teflon 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: With wedge contact For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 81 BNC.4 11/27/01 5:29 PM Page 82 BNC COAXIAL CONNECTORS BULKHEAD RECEPTACLE/SOLDER POT TERMINALS For Cable Group Legend, see page 69 BULKHEAD RECEPTACLE PLUG P.N. Cable Group Finish Brass Shell 112420 N/A Nickel 112421 N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 4.5 [.177] Max. panel thickness BULKHEAD RECEPTACLE JACK P.N. Cable Group Finish Insulation Impedance Crimp Tool L1 = 3.2 [.126] Max. panel thickness, L = 26.7 [1.05] 112424 N/A Nickel Delrin 50 N/A 112424T N/A Nickel Teflon 50 N/A 112575 N/A Nickel Delrin DIE CAST BODY 50 N/A 112575-75 N/A Nickel Delrin DIE CAST BODY 75 N/A 112425 75 N/A N/A Nickel Delrin L1 = 6.5 [.256] Max. panel thickness, L = 30.0 [1.18] 112426 N/A Nickel Delrin 50 N/A 112427 N/A Nickel Delrin 75 N/A L1 = 9.5 [.374] Max. panel thickness, L = 33.0 [1.30] 112428 N/A Nickel Delrin 50 N/A 112429 N/A Nickel Delrin 75 N/A BULKHEAD RECEPTACLE ISOLATED JACK P.N. Cable Group 112431 112432 Finish N/A Nickel N/A Nickel Insulation Impedance ABS ABS 50 75 Crimp Tool N/A N/A Remark: Isolated from ground, 3.2 [.126] Max. panel thickness 82 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 83 BULKHEAD RECEPTACLE/SOLDER POT TERMINALS For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 BULKHEAD RECEPTACLE ISOLATED JACK — REAR MOUNT P.N. Cable Group 112624 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A BULKHEAD RECEPTACLE — PRESS FIT P.N. Cable Group 112579 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A BULKHEAD RECEPTACLE — PRESS FIT P.N. Cable Group 112607 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 83 BNC.4 11/27/01 5:29 PM Page 84 BNC COAXIAL CONNECTORS PANEL RECEPTACLES For Cable Group Legend, see page 69 PANEL RECEPTACLE JACK P.N. Cable Group 112290 112291 Finish Insulation Impedance Crimp Tool N/A Nickel N/A Nickel Teflon Teflon 50 75 N/A N/A 112492 N/A Nickel FLUSH REAR Teflon 50 N/A 112511 N/A Nickel Teflon FLUSH REAR 4-40 SCREWS 50 N/A PANEL RECEPTACLE PLUG P.N. Cable Group 112653 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool A PANEL RECEPTACLE JACK — EXPOSED TFE TYPE P.N. Cable Group Finish 112524N N/A Nickel 112524S N/A Silver Insulation Impedance Teflon Teflon 50 50 Crimp Tool N/A N/A NOTE: Consult factory for other lengths available PANEL RECEPTACLE — EXPOSED TEFLON — GASKET SEAL P.N. Cable Group 112639 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A Note: Consult factory for other lengths available. 84 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:29 PM Page 85 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 STRAIGHT PCB MOUNT JACK P.N. Cable Group 112404 112405 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A Mounting Hole Dia. see “TYPE C” page 185 STRAIGHT PCB MOUNT JACK Cable Group P.N. 112538 112543 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A STRAIGHT PCB MOUNT JACK P.N. Cable Group 112515 Finish Insulation Impedance Crimp Tool N/A Nickel Teflon 50 N/A 112591 N/A Nickel WATERPROOF Teflon 50 N/A STRAIGHT PCB MOUNT JACK P.N. Cable Group 112553 Finish Insulation Impedance Crimp Tool N/A Nickel Teflon 50 N/A 112553-10 N/A Nickel WATERPROOF Teflon 75 N/A 112554 Teflon 75 N/A N/A Nickel For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 85 BNC.4 11/27/01 5:30 PM Page 86 BNC COAXIAL CONNECTORS PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 STRAIGHT PCB MOUNT JACK — THREE LEGS P.N. Cable Group 112483 Finish N/A Nickel 3 LEGS Insulation Impedance Teflon 50 Crimp Tool N/A STRAIGHT PCB MOUNT JACK P.N. Cable Group 112586 Finish N/A Nickel Insulation Impedance Teflon 75 Crimp Tool N/A STRAIGHT PCB MOUNT JACK P.N. Cable Group 112406 112407 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A Mounting Hole Dia. see “TYPE F” page 185 STRAIGHT PCB MOUNT JACK P.N. Cable Group 112536 112578 86 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:30 PM Page 87 PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 STRAIGHT PCB EDGE MOUNT JACK — END LAUNCH Cable Group P.N. Finish Insulation Impedance Crimp Tool 112608 N/A Nickel 112622 N/A Nickel SQUARE FLANGE Teflon Teflon 50 75 N/A N/A 112640 N/A Nickel 112641 N/A Nickel ROUND FLANGE Teflon Teflon 50 75 N/A N/A 112608 112640 BULKHEAD VERTICAL PCB RECEPTACLE — END LAUNCH P.N. Cable Group 112633 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A COMMERCIAL STRAIGHT PCB MOUNT JACK P.N. Cable Group Finish Insulation Impedance Crimp Tool White Housing 112408 N/A Nickel Polypropylene 112409 N/A Nickel Polypropylene 50 75 N/A N/A Black Housing 112410 N/A Nickel Polypropylene 112411 N/A Nickel Polypropylene 50 75 N/A N/A Remark: Add L to part number for Locking Legs Mounting Hole Dia. see “TYPE G” page 185 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 87 BNC.4 11/27/01 5:30 PM Page 88 BNC COAXIAL CONNECTORS PRINTED CIRCUIT BOARD/RECEPTACLES For Cable Group Legend, see page 69 COMMERCIAL STRAIGHT PCB MOUNT JACK — METAL BODY Cable Group P.N. Diecast 112488 112495 Finish Insulation Impedance N/A Nickel Polypropylene N/A Nickel Polypropylene 50 75 Crimp Tool N/A N/A Note: Connectors are shipped with lock nut and washer Mounting Hole Dia. see “TYPE G” page 185 COMMERCIAL RIGHT ANGLE PCB MOUNT JACK Cable Group P.N. Finish Insulation Impedance Crimp Tool High Profile, 15.88 [.625] White 112412 N/A Nickel Polypropylene 112413 N/A Nickel Polypropylene 50 75 N/A N/A High profile, 15.88 [.625] Black 112414 N/A Nickel Polypropylene 112415 N/A Nickel Polypropylene 50 75 N/A N/A Low Profile, 13.1 [.516] White 112416 N/A Nickel Polypropylene 112417 N/A Nickel Polypropylene 50 75 N/A N/A Low Profile, 13.1 [.516] Black 112418 N/A Nickel Polypropylene 112419 N/A Nickel Polypropylene 50 75 N/A N/A Mounting Hole Dia. see “TYPE H” page 185 Remark: Add L to part number for Locking Legs Note: Connectors are shipped with lock nut and washer COMMERCIAL RIGHT ANGLE PCB MOUNT JACK — METAL BODY P.N. Cable Group Finish Insulation Impedance Crimp Tool Diecast High Profile, 15.88 [.625] 112502 N/A Nickel Polypropylene 112503 N/A Nickel Polypropylene 50 75 N/A N/A Low Profile, 13.1 [.516] 112487 N/A Nickel Polypropylene 112494 N/A Nickel Polypropylene 50 75 N/A N/A Note: Connectors are shipped with lock nut and washer Mounting Hole Dia. see “TYPE H” page 185 RIGHT ANGLE PCB MOUNT RECEPTACLE — METAL BODY P.N. Cable Group 112659 88 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:30 PM Page 89 BULKHEAD FEEDTHROUGH ADAPTERS For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 112433 112434 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 8.0 mm [.315] Max. panel thickness, M55339/13–00492 JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 112435 112436 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 7.0 mm [.276] Max. panel thickness, UG–492A JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 112437 112438 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: Without gasket, 5.5 mm [.217] Max. panel thickness JACK-TO-PLUG BULKHEAD ADAPTER — PUSH-ON P.N. Cable Group 112532 Finish N/A Nickel Insulation Impedance Teflon 75 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 89 BNC.4 11/27/01 5:30 PM Page 90 BNC COAXIAL CONNECTORS BULKHEAD ISOLATED GROUND ADAPTERS For Cable Group Legend, see page 69 JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER P.N. Cable Group 112439 112440 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: With Isolated Bushing, 4.5 mm [.177] Max. panel thickness JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER P.N. Cable Group 112443 112444 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: Isolated from ground, 5.5 mm [.217] Max. panel thickness DUAL PORT RIGHT ANGLE PCB MOUNT RECEPTACLE P.N. Cable Group Finish Insulation Impedance Crimp Tool WHITE HOUSING 112660 N/A Nickel Polypropylene 50 N/A BLACK HOUSING 112661 N/A Nickel Polypropylene 50 N/A 90 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:30 PM Page 91 ADAPTERS For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 JACK-TO-JACK ADAPTER Cable Group P.N. 112445 112446 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A PLUG-TO-PLUG ADAPTER Cable Group P.N. Finish Insulation Impedance Crimp Tool Brass Shell 112447 N/A Nickel 112448 N/A Nickel Delrin Delrin 50 75 N/A N/A Diecast Shell 112449 N/A Nickel 112450 N/A Nickel Delrin Delrin 50 75 N/A N/A RIGHT ANGLE ADAPTER — PLUG-TO-JACK Cable Group P.N. Finish Insulation Impedance Crimp Tool Brass Shell 112451 N/A Nickel 112452 N/A Nickel Delrin Delrin 50 75 N/A N/A Diecast Shell 112453 N/A Nickel 112454 N/A Nickel Delrin Delrin 50 75 N/A N/A RIGHT ANGLE ADAPTER — PLUG-TO-PLUG P.N. Cable Group 112655 Finish N/A Nickel Insulation Impedance Delrin 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 91 BNC.4 11/27/01 5:30 PM Page 92 BNC COAXIAL CONNECTORS TEE ADAPTERS For Cable Group Legend, see page 69 TEE ADAPTER — JACK-TO-JACK-TO-JACK Cable Group P.N. 112455 112456 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A TEE ADAPTER — JACK-TO-PLUG-TO-JACK P.N. Cable Group 112461 112462 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: Diecast Version Remark: TEE contact pin isolated completely TEE ADAPTER — JACK-TO-JACK-TO-PLUG P.N. Cable Group 112567 112590 92 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Teflon 50 50 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:30 PM Page 93 TERMINATORS For Cable Group Legend, see page 69 BNC COAXIAL CONNECTORS BNC.4 BNC TERMINATOR PLUG P.N. Cable Group 202103 202104 202105 202106 202107 202108 N/A N/A N/A N/A N/A N/A Finish Insulation Impedance Crimp Tool Nickel Nickel Nickel Nickel Nickel Nickel Delrin Teflon Delrin Teflon Delrin Teflon 50 50 75 75 93 93 N/A N/A N/A N/A N/A N/A 202113 N/A Nickel HIGH PERFORMANCE Teflon 50 N/A 202119 N/A Nickel HIGH PERFORMANCE Teflon 75 N/A BNC TERMINATOR JACK P.N. Cable Group 202120 202111 112504 Finish N/A Nickel N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin Delrin 50 75 500 Crimp Tool N/A N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 93 BNC.4 11/27/01 5:30 PM Page 94 BNC COAXIAL CONNECTORS ACCESSORIES For Cable Group Legend, see page 69 BNC MALE CAP & CHAIN P.N. Cable Group Finish 202100 N/A Nickel WITH CHAIN Insulation Impedance N/A Crimp Tool N/A N/A N/A N/A Remark: Chain Length 100 mm 202100-10 N/A Nickel LESS CHAIN N/A BNC MALE SHORTING CAP P.N. Cable Group Finish Insulation Impedance Crimp Tool 202114 N/A Nickel LESS CHAIN Teflon N/A N/A 202115 N/A Nickel WITH CHAIN Teflon N/A N/A 94 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183.