122430.

11/27/01 4:55 PM Page 95 TNC COAXIAL CONNECTORS The Connex TNC connectors are made to a high quality level. Medium size coaxial connectors with thread coupling. 50 ohm impedance for applications up to 11 GHz and 75 ohm impedance up to 1 GHz. Cable entires full crimp or clamp type with soldered or crimp center contact. 75 OHM SERIES Within the internationally standardized TNC mating face dimensions, a perfect 75 ohm characteristic impedance cannot be realized. However, at frequencies up to 1 GHz, the small impedance deviation is negligible for practical applications. A typical SWR of 1.15:1 at 1 GHz is achieved. All 75 ohm TNC connectors and 50 ohm TNC connectors are intermateable. Note: Silverplated bodies are available by adding “S” to end of part number. Nexcote (white bronze) plating with no nickel under body or center contact is available by adding “NEX” to end of part number. ELECTRICAL SPECIFICATIONS Impedance 50 ohm 75 ohm Frequency Range 0–11 GHz 0–1 GHz Working Voltage 500 Volts rms. 500 Volts rms. Dielectric Withstanding Voltage 1500 Volts rms. 1500 Volts rms. VSWR 1.3 max. 0–11 GHz 1.05 + 0.1f (GHz) DC to 1 GHz Contact Resistance Center contact 1.5 milliohm Center contact 1.5 milliohm Outer contact 0.2 milliohm Outer contact 0.2 milliohm Insulation Resistance 5000 megohms (min) 5000 megohms (min) MATERIAL SPECIFICATIONS PARTS NAME MATERIAL FINISH Center Male Brass Gold or Silver plated Contact Female Phosphor Bronze (nominal) or Gold or Silver plated Beryllium Copper Metal parts Brass Nickel* Insulators Teflon, Delrin, PBT polyester None Clamp gaskets Silicone rubber, Synthetic rubber None Crimp ferrule Annealed copper Nickel* 95 TNC COAXIAL CONNECTORS TNC.4 TNC COAXIAL CONNECTORS TNC.4 11/27/01 4:55 PM Page 96 TNC COAXIAL CONNECTORS INTERFACE MATING DIMENSIONS PLUG Letter A Millimeters [Inches} Minimum Maximum 11.18 [.440] – B FLARED TO MEET GOOD ELECTRICAL CONTACT C D E F G H J K M N P Q 4.83 1.32 5.33 0.15 5.28 0.08 2.06 1.98 – 1.60 3.96 – [.190] [.052] [.210] [.006] [.208] [.003] [.081] [.078] [.063] [.156] – 1.37 5.84 0.46 5.79 1.02 2.21 – 1.98 – – 0.64 [.054] [.230] [.018] [.228] [.040] [.087] [.078] [.025] JACK Letter A B C D E F G H J K L M N P R S Millimeters Minimum 9.60 [.378] 8.79 [.346] 8.31 [.327] 8.10 [.319] – 1.73 [.068] 8.31 [.327] 4.75 [.187] 4.72 [.186] – 4.95 [.195] 2.06 [.081] – 4.78 [.188] 10.52 [.414] 0.38 [.015] [Inches} Maximum 9.70 [.382] 9.04 [.356] 8.46 [.333] 8.15 [.321] 4.72 [.186] 2.24 [.088] 8.51 [.335] – 5.23 [.206] 0.15 [.006] – 2.21 [.087] 6.50 [.256] 5.28 [.208] – 0.76 [.030] NOTE 1: I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH 1.32/1.37 MM DIA. PIN. 96 11/27/01 4:55 PM Page 97 TNC COAXIAL CONNECTORS All connector bodies, unless otherwise noted, are nickel plated. Center contacts are 3µ" gold plated. Insulators are Delrin, unless otherwise noted. Silver plating and Teflon insulators are available on virtually all TNC connectors. Please contact Connex for samples and quotes. All dimensions in millimeters and [inches]. 01 01A 01B 02 03 03A 04 04A 05 05A 06 C A B L E 58/ 58A/ 58C/ 141/ 303/ LMR195™/ B7806A 55/ 142/ 223/ 400 LMR200™/ B7807A 58 PLENUM/THINNET/ 122U/ B88240/ B89907 59/ 62/ 140/ 210 59/ U-20AWG 59/ U PLENUM 59/ U PLENUM-20AWG 174/ 188A/ 316/ B7805A 316/ U DOUBLE BRAIDED 179/ 187/ B9221 G 06A 07 07A 07B 07C R O U P L 179/ U DOUBLE BRAIDED 8/ 8A/ 213/ 393 214 8X/ LMR240™/ B7808A B9913/ LMR400™/ B7810A/ B8214 07D B89913 07E 11 07F 11/ U-14AWG/ B8213/ B9292/ B7731/ B1859A 08 6/ 143/ 212 08A B1694A/ B9248 08B 6 PLENUM/ B1695A E G 09 10 11 12 13 14 15 15A 16 17 18 19 E N D B8227/ 89207 .141 SEMI-RIGID/ 402/U .085 SEMI-RIGID/ 405/U .250 SEMI-RIGID .047 SEMI-RIGID/ B1674A 178/ 196 B8281/ B9231/ B9141 B88281 180/ 195/ 122/ B8218/ B1865A/ B1855 LMR6OO™ AT&T734A/ B1505A AT&T735A/ B735A1 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE TNC COAXIAL CONNECTORS TNC.4 STRAIGHT CRIMP PLUG — SINGLE CRIMP P.N. Cable Group 122100 122103 122104 122107 01 03 02 04 Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 75 50 75 Crimp Tool E E E E Remark: Only for solid center conductor cable STRAIGHT CRIMP PLUG — STANDARD CABLE P.N. Cable Group 122108 122372 122410 122110 122111 122426 122394 122398 122408 122393 122470 122390 122465 122391 122417 122951* 122950* 122471 01 01A 01B 03 03 03A 07 07A 07B 07C 07F 08 08A 15 17 18 19 Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel — Nickel TIMES LMR300™ Insulation Impedance Crimp Tool Delrin Delrin Delrin Delrin Delrin Delrin Teflon Teflon Delrin Teflon Teflon Delrin Teflon Delrin Teflon Teflon Teflon 50 A 50 A 50 A 50 A 75 A 75 A 50 D 50 D 50 A 50 L 75 D 75 E 75 A/H 75 E 50 .610 HEX 75 A 75 B Teflon 50 N/A *Center contact .053" diameter, 30µ" Au. True 75 ohm. Use .044 hex or 12-indent crimp For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 97 TNC.4 11/27/01 4:55 PM Page 98 TNC COAXIAL CONNECTORS PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 STRAIGHT CRIMP PLUG — PLENUM CABLE P.N. Cable Group 122112 122114 122115 122472 02 04 04 04A Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 50 75 75 Crimp Tool A A A A STRAIGHT SOLDER PLUG — SEMI-RIGID CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool 122387 11 Nickel/Gold Teflon 122386 10 Nickel/Gold Teflon 50 50 N/A N/A 122386HEX 10 Nickel/Gold Teflon HEX COUPLING NUT 50 N/A 122387 122386 STRAIGHT CRIMP PLUG — MINIATURE CABLE P.N. Cable Group 122116 05 Finish Insulation Impedance Crimp Tool Nickel Delrin 50 B 122395 05 Nickel HIGH FREQUENCY Teflon 50 B 122375 122117 122447 122457 Delrin Delrin Delrin Teflon 50 75 75 75 B B B B 05A 06 06A 16 Nickel Nickel Nickel Nickel Remark: With teflon sleeve, Hex. crimp size .178" 98 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 99 PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 STRAIGHT CRIMP PLUG — PIN-IN-PIN — MINIATURE CABLE P.N. Cable Group 122118 122119 122429 05 06 14 Finish Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin 50 75 50 Crimp Tool B B B Remark: Hex. crimp size .128" Ferrule Crimp Tool Crimped Size .128" Tool No. 47-10150 4–Way Indent Crimp Tool No. 47001 STRAIGHT CRIMP PLUG — MINIATURE CABLE P.N. Cable Group 122120 06 Finish Nickel Insulation Impedance TPX 75 Crimp Tool B Remark: TPX Insulator/75 ohm AVAILABLE ONLY For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 99 TNC COAXIAL CONNECTORS TNC.4 TNC.4 11/27/01 4:55 PM Page 100 TNC COAXIAL CONNECTORS RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 RIGHT ANGLE CRIMP/SOLDER PLUG — STANDARD CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool 122140 122430 122142 122143 122411 122414 122416 01 01A 03 03 01B 07B 07C Nickel Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Teflon Teflon 50 50 50 75 50 50 50 A A A A A A L 122464 17 Nickel Teflon 50 .610 HEX Remark: Cable center conductor solder to pin directly RIGHT ANGLE CRIMP/SOLDER PLUG — PLENUM CABLE P.N. Cable Group 122144 122146 122147 02 04 04 Finish Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin 50 50 75 Crimp Tool A A A Remark: Cable center conductor solder to pin directly RIGHT ANGLE CRIMP/SOLDER PLUG — MINIATURE CABLE P.N. Cable Group 122148 122407 122149 122448 05 05A 06 06A Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 50 75 75 Crimp Tool B B B B Remark: Cable center conductor solder to pin directly, Hex. crimp size .178" RIGHT ANGLE CRIMP/CRIMP PLUG — STANDARD CABLE P.N. Cable Group 122150 122152 122153 122365 100 01 03 03 01A Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 50 75 50 Crimp Tool A A A A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 101 RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 RIGHT ANGLE SOLDER PLUG — SEMI-RIGID CABLE P.N. Cable Group 122420 122422 Finish Insulation Impedance 11Nickel/Gold Teflon 10Nickel/Gold Teflon Crimp Tool 50 50 N/A N/A RIGHT ANGLE CRIMP/CRIMP PLUG — PLENUM CABLE P.N. Cable Group 122154 122156 122157 02 04 04 Finish Insulation Impedance Nickel Nickel Nickel Delrin Delrin Delrin Crimp Tool 50 50 75 A A A Remark: Crimp/Crimp Type RIGHT ANGLE CRIMP/CRIMP PLUG — MINIATURE CABLE P.N. Cable Group 122158 122159 122376 Finish 05 Nickel 06 Nickel 05A Nickel Insulation Impedance Delrin Delrin Delrin Crimp Tool 50 75 50 B B B Remark: With teflon sleeve, Hex. crimp size .178”, Crimp/Crimp Type For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 101 TNC COAXIAL CONNECTORS TNC.4 TNC.4 11/27/01 4:55 PM Page 102 TNC COAXIAL CONNECTORS JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 STRAIGHT CRIMP JACK — STANDARD CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool Teflon/Captured 122122 01 122124 03 122125 03 122373 01A 122412 01B 122392 07C 122409 07B 122453 15 Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Teflon Teflon Teflon Delrin Teflon Teflon Delrin Teflon 50 50 75 50 50 50 50 50 A A A A A L A E 122418 Nickel Teflon 50 .610 HEX 17 STRAIGHT CRIMP JACK — PLENUM CABLE P.N. Cable Group Teflon/Captured 122130 02 122132 04 122133 04 122473 04A Finish Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon 50 50 75 75 Crimp Tool A A A A STRAIGHT CRIMP JACK — MINIATURE CABLE P.N. Cable Group 122138 122377 122139 122449 122424 05 05A 06 06A 16 Finish Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin 50 50 75 75 75 Crimp Tool B B B B B Remark: With teflon sleeve, Hex. crimp size .178" STRAIGHT CRIMP JACK — SEMI-RIGID CABLE P.N. Cable Group 122421 122423 102 Finish Insulation Impedance 11Nickel/Gold Teflon 10Nickel/Gold Teflon 50 50 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 103 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 BULKHEAD CRIMP JACK — STANDARD CABLE P.N. Cable Group Teflon/Captured 122160 01 122162 03 122163 03 122363 01A 122413 01B 122415 07B 122405 07C 122382 08 122466 08A 122425 19 Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Delrin Delrin Teflon Delrin Teflon Teflon Teflon 50 50 75 50 50 50 50 75 75 75 Crimp Tool A A A A A A L E A/H B Remark: 3.5 [.138] Max. panel thickness BULKHEAD CRIMP JACK — STANDARD CABLE P.N. Cable Group Finish Teflon/Captured 122168 01 Nickel 122170 03 Nickel 122171 03 Nickel Insulation Impedance Teflon Teflon Teflon 50 50 75 Crimp Tool A A A Remark: 6.5 [.256] Max. panel thickness BULKHEAD CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Teflon/Captured 122176 02 Nickel 122178 04 Nickel 122179 04 Nickel Insulation Impedance Teflon Teflon Teflon 50 50 75 Crimp Tool A A A Remark: 3.5 [.138] Max. panel thickness BULKHEAD CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Teflon/Captured 122184 02 Nickel 122186 04 Nickel 122187 04 Nickel Insulation Impedance Teflon Teflon Teflon 50 50 75 Crimp Tool B B B Remark: 6.5 [.256] Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 103 TNC COAXIAL CONNECTORS TNC.4 TNC.4 11/27/01 4:55 PM Page 104 TNC COAXIAL CONNECTORS BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 BULKHEAD CRIMP JACK — MINIATURE CABLE P.N. Cable Group Finish 122192 05 122428 05 Nickel Teflon FOR 6.5 [.256] PANEL 122358 122193 122450 122370 05A 06 06A 14 Nickel Insulation Impedance Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Crimp Tool 50 B 50 B 50 75 75 50 B B B B 122403 14 Nickel Delrin FOR 6.5 [.256] PANEL 50 B 122441 16 75 B Nickel Teflon Remark: With teflon sleeve, Hex. crimp size .178", 3.5 [.138] Max. panel thickness BULKHEAD SOLDER JACK — SEMI-RIGID CABLE — FRONT MOUNT P.N. Cable Group Finish Insulation Impedance Crimp Tool 122406 10 Nickel/Gold Teflon 50 N/A 122469 10 Nickel/Gold Teflon FRONT MOUNT 50 N/A 122469 BULKHEAD SOLDER JACK — SEMI-RIGID CABLE — REAR MOUNT P.N. Cable Group Finish Insulation Impedance Crimp Tool 122401 10 Nickel/Gold Teflon 122400 11 Nickel/Gold Teflon 50 50 N/A N/A 122463 11 Nickel/Gold Teflon FRONT MOUNT 75 N/A BULKHEAD ISOLATED CRIMP JACK — STANDARD CABLE P.N. Cable Group 122202 122204 122205 01 03 03 Finish Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon 50 50 75 Crimp Tool A A A Remark: 6.0 [.236] Max. panel thickness 104 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 105 BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE For Cable Group Legend, see page 97 BULKHEAD ISOLATED CRIMP JACK — PLENUM CABLE Cable Group P.N. 122194 122196 122197 02 04 04 Finish Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Crimp Tool 50 50 75 A A A Remark: 6.0 [.236] Max. panel thickness BULKHEAD ISOLATED CRIMP JACK — MINIATURE CABLE Cable Group P.N. 122210 122211 05 06 Finish Nickel Nickel Insulation Impedance Teflon Teflon Crimp Tool 50 75 B B Remark: With teflon sleeve, Hex. crimp size .178", 6.0 [.236] Max. panel thickness RIGHT ANGLE BULKHEAD CRIMP JACK P.N. Cable Group 122454 05 Finish Nickel Insulation Impedance Teflon 50 Crimp Tool B For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 105 TNC COAXIAL CONNECTORS TNC.4 TNC.4 11/27/01 4:55 PM Page 106 TNC COAXIAL CONNECTORS PANEL JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE/RECEPTACLE For Cable Group Legend, see page 97 PANEL CRIMP JACK — STANDARD CABLE P.N. Cable Group Teflon/Captured 122230 01 122232 03 122233 03 122374 01A Finish Insulation Impedance Crimp Tool Nickel Nickel Nickel Nickel Teflon Teflon Teflon Teflon 50 50 75 50 A A A A Delrin/Noncaptured 122234 01 Nickel 122236 03 Nickel 122237 03 Nickel Delrin Delrin Delrin 50 50 75 A A A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — PLENUM CABLE P.N. Cable Group Finish Teflon/Captured 122238 02 Nickel 122240 04 Nickel 122241 04 Nickel Insulation Impedance Teflon Teflon Teflon Crimp Tool 50 50 75 A A A Remark: 5.0 [.197] Max. panel thickness PANEL CRIMP JACK — MINIATURE CABLE P.N. Cable Group 122246 122379 122247 122442 122460 05 05A 06 14 16 Finish Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Crimp Tool 50 50 75 50 75 B B B B B Remark: With teflon sleeve, Hex. crimp size .178", 5.0 [.197] Max. panel thickness PANEL SOLDER JACK — SEMI-RIGID CABLE P.N. Cable Group Finish Insulation Impedance 122419 10 Nickel/Gold Teflon 122389 11 Nickel/Gold Teflon 106 50 50 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 107 PANEL JACK CRIMP ATTACHMENTS FOR FLEXIBLE AND SEMI-RIGID CABLE/RECEPTACLE For Cable Group Legend, see page 97 2-HOLE FLANGE PANEL JACK (REVERSE POLARIZED) — THREADED HOLES P.N. Cable Group Finish Insulation Impedance 122458RP 05 Nickel 122459RP 14 Nickel Teflon Teflon 50 50 Crimp Tool B B TWIST-ON ATTACHMENTS FOR FLEXIBLE CABLE TWIST-ON PLUG Cable Group P.N. 122250 122252 122253 122254 122256 122257 01 03 03 02 04 04 Finish Insulation Impedance Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: Only for solid center conductor cable RIGHT ANGLE TWIST-ON PLUG P.N. Cable Group 122266 122268 122269 122270 122272 122273 01 03 03 02 04 04 Finish Insulation Impedance Nickel Nickel Nickel Nickel Nickel Nickel Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: Only for solid center conductor cable TWIST-ON JACK P.N. Cable Group 122258 122260 122261 122262 122264 122265 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: Only for solid center conductor cable For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 107 TNC COAXIAL CONNECTORS TNC.4 TNC.4 11/27/01 4:55 PM Page 108 TNC COAXIAL CONNECTORS CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 97 STRAIGHT CLAMP PLUG — CAPTIVE CONTACT P.N. Cable Group 122274 122276 122277 122278 122280 122281 122381 122397 01 03 03 02 04 04 07 07C Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin Teflon Teflon 50 50 75 50 50 75 50 50 Crimp Tool N/A N/A N/A N/A N/A N/A N/A N/A Remark: Barrel O.D., 12.5 mm STRAIGHT CLAMP PLUG P.N. Cable Group 122282 122284 122285 122402 01 03 03 05 Finish Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin 50 50 75 50 Crimp Tool N/A N/A N/A N/A RIGHT ANGLE CLAMP PLUG P.N. Cable Group 122286 122288 122289 122290 122292 122293 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A STRAIGHT CLAMP JACK — CAPTIVE CONTACT P.N. Cable Group 122294 122296 122297 122298 122300 122301 122446 108 01 03 03 02 04 04 07 Finish Nickel Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon Teflon Teflon Teflon 50 50 75 50 50 75 50 Crimp Tool N/A N/A N/A N/A N/A N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 109 CLAMP ATTACHMENTS FOR FLEXIBLE CABLE For Cable Group Legend, see page 97 TNC COAXIAL CONNECTORS TNC.4 BULKHEAD CLAMP JACK P.N. Cable Group 122452 05 Finish Nickel Insulation Impedance Teflon 50 Crimp Tool N/A WEDGE COMPRESSION ATTACHMENTS FOR FLEXIBLE CABLE WEDGE COMPRESSION PLUG P.N. Cable Group 122302 122304 122305 122306 122308 122309 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Delrin Delrin Delrin Delrin Delrin Delrin 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: With wedge pin WEDGE COMPRESSION JACK P.N. Cable Group 122310 122312 122313 122314 122316 122317 01 03 03 02 04 04 Finish Nickel Nickel Nickel Nickel Nickel Nickel Insulation Impedance Teflon Teflon Teflon Teflon Teflon Teflon 50 50 75 50 50 75 Crimp Tool N/A N/A N/A N/A N/A N/A Remark: With wedge contact For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 109 TNC.4 11/27/01 4:55 PM Page 110 TNC COAXIAL CONNECTORS PANEL RECEPTACLES For Cable Group Legend, see page 97 PANEL RECEPTACLE JACK P.N. Cable Group 122248 122249 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A PANEL RECEPTACLE — EXTENDED TEFLON POST — 0.500 FLANGE P.N. Cable Group 122385 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A Note: Consult factory for other lengths available. PANEL RECEPTACLE — EXTENDED TEFLON POST P.N. Cable Group 122396 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A Note: Consult factory for other lengths available. PANEL RECEPTACLE — EXTENDED TEFLON POST — GASKET SEAL P.N. Cable Group 122443 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A Note: Consult factory for other lengths available. 110 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 111 PRINTED CIRCUIT BOARD/STRAIGHT R/A TERMINALS For Cable Group Legend, see page 97 TNC COAXIAL CONNECTORS TNC.4 COMMERCIAL STRAIGHT PCB MOUNT JACK Cable Group P.N. Finish Insulation Impedance Crimp Tool White Housing 122318 N/A Nickel Polypropylene 122319 N/A Nickel Polypropylene 50 75 N/A N/A Black Housing 122320 N/A Nickel Polypropylene 122321 N/A Nickel Polypropylene 122383 N/A Nickel Diecast body 50 75 50 N/A N/A N/A Mounting Hole Dia. see “TYPE G” page 185 COMMERCIAL RIGHT ANGLE PCB MOUNT JACK Cable Group P.N. Finish Insulation Impedance Crimp Tool High Profile, 15.88 mm White 122322 N/A Nickel Polypropylene 122323 N/A Nickel Polypropylene 50 75 N/A N/A High Profile, 15.88 mm Black 122324 N/A Nickel Polypropylene 122325 N/A Nickel Polypropylene 122384 N/A Nickel Diecast body 50 75 50 N/A N/A N/A Low Profile, 13.1 mm White 122326 N/A Nickel Polypropylene 122327 N/A Nickel Polypropylene 50 75 N/A N/A Low Profile, 13.1 mm Black 122328 N/A Nickel Polypropylene 122329 N/A Nickel Polypropylene 50 75 N/A N/A Mounting Hole Dia. see “TYPE H” page 185 STRAIGHT PCB MOUNT RECEPTACLE JACK Cable Group P.N. 122440 122439 Finish N/A Nickel N/A Nickel Insulation Impedance Teflon Teflon 50 75 Crimp Tool N/A N/A RIGHT ANGLE BULKHEAD RECEPTACLE P.N. Cable Group 122368 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 111 TNC.4 11/27/01 4:55 PM Page 112 TNC COAXIAL CONNECTORS BULKHEAD RECEPTACLE/SOLDER POT TERMINALS For Cable Group Legend, see page 97 BULKHEAD RECEPTACLE PLUG Cable Group P.N. 122330 122331 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 4.5 [.177] Max. panel thickness BULKHEAD RECEPTACLE JACK Cable Group P.N. Finish Insulation Impedance Crimp Tool L = 3.2 [.126] panel thickness, L = 26.7 [1.05] 122332 N/A Nickel Delrin 50 122333 N/A Nickel Delrin 75 N/A N/A L = 6.5 [.256] panel thickness, L = 30.0 [1.18] 122334 N/A Nickel Delrin 50 122335 N/A Nickel Delrin 75 N/A N/A L1 = 9.5 [.374] panel thickness, L = 33.0 [1.30] 122336 N/A Nickel Delrin 50 122337 N/A Nickel Delrin 75 N/A N/A BULKHEAD RECEPTACLE ISOLATED JACK Cable Group P.N. 122338 122339 Finish N/A Nickel N/A Nickel Insulation Impedance Nylon Nylon 50 75 Crimp Tool N/A N/A Remark: Isolated from ground, 3.2 [.126] Max.panel thickness RIGHT ANGLE PCB MOUNT RECEPTACLE — METAL BODY P.N. Cable Group 122462 112 Finish N/A Nickel Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 113 BULKHEAD FEEDTHROUGH ADAPTERS For Cable Group Legend, see page 97 TNC COAXIAL CONNECTORS TNC.4 JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 122340 122341 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 8.0 mm Max. panel thickness JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 122342 122343 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: 7.0 mm Max. panel thickness JACK-TO-JACK BULKHEAD ADAPTER P.N. Cable Group 122344 122345 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: Without gasket, 5.5 mm Max. panel thickness For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 113 TNC.4 11/27/01 4:55 PM Page 114 TNC COAXIAL CONNECTORS BULKHEAD FEEDTHROUGH ADAPTERS For Cable Group Legend, see page 97 JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER Cable Group P.N. 122346 122347 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A Remark: With isolated bushing, 4.5 mm Max. panel thickness JACK-TO-PLUG BULKHEAD ADAPTER — PUSH ON Cable Group P.N. 122380 Finish N/A Nickel Insulation Impedance Teflon 75 Crimp Tool N/A BULKHEAD RIGHT ANGLE TNC FEMALE TO MCX FEMALE ADAPTER P.N. Cable Group 122427 114 Finish N/A Nickel Insulation Impedance Tefon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 115 ADAPTERS For Cable Group Legend, see page 97 TNC COAXIAL CONNECTORS TNC.4 JACK-TO-JACK ADAPTER P.N. Cable Group 122348 122349 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A PLUG-TO-PLUG ADAPTER P.N. Cable Group 122350 122351 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A RIGHT ANGLE ADAPTER — PLUG-TO-JACK P.N. Cable Group 122352 122353 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 115 TNC.4 11/27/01 4:55 PM Page 116 TNC COAXIAL CONNECTORS TEE ADAPTERS For Cable Group Legend, see page 97 TEE ADAPTER — JACK-TO-JACK-TO-JACK P.N. Cable Group 122354 122355 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A TEE ADAPTER — JACK-TO-PLUG-TO-JACK P.N. Cable Group 122356 122357 116 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 4:55 PM Page 117 TERMINATORS For Cable Group Legend, see page 97 TNC COAXIAL CONNECTORS TNC.4 TNC TERMINATOR PLUG Cable Group P.N. 202117 202118 Finish N/A Nickel N/A Nickel Insulation Impedance Delrin Delrin 50 75 Crimp Tool N/A N/A ACCESSORIES TNC MALE CAP & CHAIN P.N. Cable Group 202101 Finish N/A Nickel Insulation Impedance N/A N/A Crimp Tool N/A Remark: Chain Length 100 mm For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 117 TNC.4 11/27/01 4:55 PM Page 118