123GB-0799-0

Miniature Rugged Connector Series Miniature Rugged Connector Series Intended for harsh environment applications and used extensively in soldier communications, Amphenol Terrapin is a miniature series of circular push-pull connectors. Within a rugged shell design Terrapin offers superior EMC performance and high environmental sealing to IP68. Resilient in severe battlefield situations the RoHS compliant black-silver plating is both low-lustre and corrosion resistant. Featuring an optional locking mechanism, multiple shell sizes with up to 37 contacts and suitability for overmoulding, Terrapin is the preferred choice for miniature connectors in military and other harsh environment applications. Terrapin shells are machined from brass giving an increased connectors can be terminated with screen retention straps number of mating cycles and higher degree of robustness and heatshrink boots giving full 360˚ screening. over traditional aluminium connectors. Five different keying options are available to prevent mis-mating; N, A, B, C and D. Standard plating is non-reflective black-silver, alternative plating finishes are available upon request. The customised design specification of Terrapin lends itself to a variety of applications. Originally designed for soldier mounted applications such as Radios, Headsets and GPS units, Terrapin is also suitable for Gigabit Ethernet and USB Terrapin is available in two different styles of mating; either 2.0 and therefore widely used on Computer Systems, LAN Snatch, being a break-away connector with no moving Switches and Routers. The high degree of sealing offered by parts, or Latch, which has an additional coupling ring Terrapin makes it perfect for Unmanned Ground Sensors allowing connections to be locked together. The same plug and Surveillance equipment. Whatever the application, can be mated to either Snatch or Latch receptacles. Both Terrapin offers space savings and improved durability over styles of product are waterproof to IP68 in both their mated traditional interconnect products. and unmated conditions. Amphenol offer a full range of cable harness solutions with standard or customised overmoulding. Alternatively, for field termination, both integral and threaded backshell 2 TERRAPIN SERIES Contents 4 4 5 6 7 Contents Terrapin terminology. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin mating options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin PART NUMBERING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin performance information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Terrapin insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plugs Table of styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76A Rear Mount Jam Nut Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67A Front Mount Jam Nut Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06K Inline Plug Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 06T Inline Plug Threaded Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76T Rear Mount Jam Nut Plug (Screw On Backshell) . . . . . . . . . . . . . . . . . . . . . . . . 8 9 10 11 12 13 Receptacles Table of styles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01K Inline Receptacle, Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L1K Inline Latching Receptacle, Integral Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . 01T Inline Receptacle, Threaded Backshell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . L1T Inline Latching Receptacle, Threaded Backshell. . . . . . . . . . . . . . . . . . . . . . . . . 07A Rear Mount Jam Nut Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71A Front Mount Receptacle, Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 15 16 17 18 19 20 Accessories 390-5057 Metal Dust Cap Assembly for Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390-5056 Metal Dust Cap Assembly for Receptacles. . . . . . . . . . . . . . . . . . . . . . . . . 390-5064 Rubber Dust Cap Assembly for Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390-5063 Rubber Dust Cap Assembly for Receptacles . . . . . . . . . . . . . . . . . . . . . . . Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overmoulded cable harnesses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 22 23 24 25 25 TERRAPIN SERIES 3 Terrapin terminology and mating options Terrapin terminology L1T L1K Integral backshell for direct screen termination Body Backshell Crimp ferrule 01K Coupling ring Integral backshell Terrapin mating options Chassis Mount Plug SCE2-B-76A Snatch Inline Receptacle SCE2-B-01K The same Chassis Mount Plug will mate with both Snatch and Latch Receptacles Latch Inline Receptacle SCE2-B-L1K 4 TERRAPIN SERIES Terrapin part numbering SCE2– B– XXX XX– XX –X X– XXX Series identifier Style Plugs 76A 67A 06K 06T 76T Receptacles 01K L1K 01T L1T 07A 71A Shell size and number of contacts 06–07 07–10A 07–12 07–14 08–19 09–26 10–37 (See page 7) Contact style P = Pins S = Sockets Key orientation N = Normal A B C D (See diagrams below) Variant code 001 PC Tails 002 Solder Buckets 003 Backshell Plating finish B = Black Silver (RoHS) Terrapin Part numbering Example: SCE2–B–76A06–07SN–002 | (985) for optional grounding spring in L1K and L1T | (981) castellated panel nut Terrapin plug and receptacle keyway orientation Keyway orientation letter PLUG keyway orientation RECEPTACLE keyway orientation N A B C D TERRAPIN SERIES 5 Terrapin performance information Terrapin performance information Test/parameter Description Electrical Current Rating Shell to Shell Continuity Contact Resistance Insulation Resistance Working Voltage Dielectric Withstanding Voltage 23 AWG contacts: 3A d.c. 20 AWG contacts: 7.5A d.c. 10mΩ max (screened) 200mΩ max (unscreened) Size 20 and 23 contacts: 5mΩ initial 10mΩ maximum 5000MΩ minimum AC (RMS) 400V 2mA maximum leakage Technical Mating Durability Backshell Overtorque Panel Nut Overtorque Non-magnetic 2000+ cycles 25 lb.f.in. 30 lb.f.in. Yes Environmental Operating Temperature Range Temperature Endurance Sealing (mated and unmated) Air Leakage Salt Spray Altitude Immersion RoHS Compliant Suitable for RoHS compliant Soldering -55°C to +125°C 250 hours +125°C IP68, 1 hour at 2 metres* Less than 1cc per hour 1000 hours 70,000 Feet Yes Yes *Contact the factory if greater depth/duration of sealing is required 6 TERRAPIN SERIES View shown for reference / View from rear of plug Terrapin insert availability Terrapin insert availability Shell size 06 07 08 09 10 06–07 07–10A 08–19 09–26 10–37 07–12 07–14 TERRAPIN SERIES 7 Plugs – table of styles Plugs – table of styles SCE2-X-76A Page 9 SCE2-X-67A Page 10 SCE2-X-06K Page 11 SCE2-X-06T Page 12 SCE2-X-76T Page 13 8 TERRAPIN SERIES Plug SCE2-X-76AXX-XXSX-XXX Plug 쮿 Rear Mount Jam Nut Plug (-002) (-001) Shell Size ØF ØH K L M N P S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .550 (13.97) .600 (15.24) .760 (19.30) .830 (21.08) .900 (22.86) .716 (18.19) .716 (18.19) .716 (18.19) .802 (20.37) .802 (20.37) .655 (16.64) .655 (16.64) .655 (16.64) .725 (18.42) .725 (18.42) .055 (1.40) .055 (1.40) .055 (1.40) .N/A .N/A .155 (3.94) .155 (3.94) .155 (3.94) .085 (2.16) .085 (2.16) .170 (4.32) .170 (4.32) .170 (4.32) .100 (2.54) .100 (2.54) .470 (11.94) .510 (12.95) .706 (17.93) .745 (18.92) .808 (20.52) .118 (3.00) .118 (3.00) .118 (3.00) .118 (3.00) .125 (3.18) .550 (13.97) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 9 Plug SCE2-X-67AXX-XXSX-XXX Plug 쮿 Front Mount Jam Nut Plug (-002) (-001) Shell Size ØF ØH L M N P S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (23.62) .592 (13.04) .592 (13.04) .592 (13.04) .662 (16.82) .662 (16.82) .324 (8.23) .324 (8.23) .324 (8.23) .254 (6.45) .254 (6.45) .279 (7.09) .279 (7.09) .279 (7.09) .209 (5.31) .209 (5.31) .424 (10.78) .424 (10.78) .424 (10.78) .354 (8.99) .354 (8.99) .525 (13.34) .685 (17.40) .825 (20.96) .955 (24.26) .995 (25.27) .100 (2.54) .100(2.54) .100 (2.54) .100 (2.54) .100 (2.54) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (23.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 10 TERRAPIN SERIES Plug SCE2-X-06KXX-XXSX Plug 쮿 Inline Plug Integral Backshell Shell Size ØF ØH ØJ K L M T Size 06 Size 07 Size 08 Size 09 Size 10 .412 (10.46) .460 (11.68) .593 (15.06) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .862 (21.89) .862 (21.89) .862 (21.89) .932 (23.67) .932 (23.67) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .300 (7.62) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .495 (12.57) .575 (14.61) .650 (16.51) .725 (18.42) .800 (20.32) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 11 Plug SCE2-X-06TXX-XXSX-003 Plug 쮿 Inline Plug Threaded Backshell Backshell ID Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.292 (32.82) 1.292 (32.82) 1.292 (32.82) 1.362 (34.60) 1.362 (34.60) .451 (11.46) .451 (11.46) .451 (11.46) .521 (13.23) .521 (13.23) .141 (3.58) .141 (3.58) .141 (3.58) .141 (3.58) .141 (3.58) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .550 (13.97) .630 (16.00) .705 (17.91) .780 (19.81) .855 (21.72) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 12 TERRAPIN SERIES Plug SCE2-X-76TXX-XXSX-XXX Plug 쮿 Rear Mount Jam Nut Plug (Screw On Backshell) Shell Size ØH ØJ K L M S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .490 (12.45) .645 (16.83) .770 (19.56) .830 (21.08) .900 (22.86) 1.150 (29.21) 1.150 (29.21) 1.150 (29.21) 1.220 (30.99) 1.220 (30.99) .655 (16.64) .655 (16.64) .655 (16.64) .725 (18.42) .725 (18.42) .330 (8.38) .330 (8.38) . .330 (8.38) .330 (8.38) .330 (8.38) .470 (11.94) 510 (12.95) .706 (17.93) .745 (18.92) .808 (20.52) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .125 (3.18) .460 (11.68) .600 (15.24) .730 (18.54) .790 (20.07) .860 (21.84) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 13 Receptacles – table of styles SCE2-X-01K Receptacle Page 15 SCE2-X-L1K Page 16 SCE2-X-01T Page 17 SCE2-X-L1T Page 18 SCE2-X-07A Page 19 SCE2-X-71A Page 20 14 TERRAPIN SERIES Receptacle SCE2-X-01KXX-XXPX Receptacle 쮿 Inline Receptacle, Integral Backshell Shell Size ØF ØH ØJ K L M N Size 06 Size 07 Size 08 Size 09 Size 10 .399 (10.13) .460 (11.68) .581 (14.76) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .900 (22.86) .900 (22.86) .900 (22.86) .970 (24.64) .970 (24.64) .525 (13.34) .525 (13.34) .525 (13.34) .525 (13.34) .525 (13.34) .330 (8.38) .330 (8.38) .330 (8.38) .400 (10.16) .400 (10.16) .090 (2.29) .090 (2.29) .090 (2.29) .020 (0.51) .020 (0.51) .462 (11.73) .575 (14.61) .620(15.75) .691 (17.55) .761 (19.33) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 15 Receptacle SCE2-X-L1KXX-XXPX Receptacle 쮿 Inline Latching Receptacle, Integral Backshell Shell Size ØF ØH ØJ K L M N Size 06 Size 07 Size 08 Size 09 Size 10 .399 (10.14) .447 (11.35) .581 (14.75) .651 (16.54) .721 (18.31) .440 (11.18) .505 (12.83) .620 (15.75) .690 (17.53) .760 (19.30) .902 (22.91) .902 (22.91) .902 (22.91) .972 (24.69) .972 (24.69) .527 (13.39) .527 (13.39) .527 (13.39) .527 (13.39) .527 (13.39) .330 (8.38) .330 (8.38) .330 (8.38) .400 (10.16) .400 (10.16) .090 (2.29) .090 (2.29) .090 (2.29) .090 (2.29) .090 (2.29) .540 (13.75) .610 (15.50) .699 (17.75) .770 (19.56) .840 (21.34) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 16 TERRAPIN SERIES Receptacle SCE2-X-01TXX-XXPX-003 Receptacle 쮿 Inline Receptacle, Threaded Backshell Backshell ID Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.377 (34.98) 1.377 (34.98) 1.377 (34.98) 1.447 (36.75) 1.447 (36.75) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .272 (6.91) .272 (6.91) .272 (6.91) .272 (6.91) .272 (6.91) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 17 Receptacle SCE2-X-L1TXX-XXPX-003 Receptacle 쮿 Inline Latching Receptacle, Threaded Backshell Backshell ID Shell Size ØF K L T -003 Size 06 Size 07 Size 08 Size 09 Size 10 1.379 (35.03) 1.379 (35.03) 1.379 (35.03) 1.449 (36.80) 1.449 (36.80) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .674 (17.12) .465 (11.81) .465 (11.81) .465 (11.81) .465 (11.81) .465 (11.81) .185 (4.70) .265 (6.73) .345 (8.76) .425 (10.80) .505 (12.83) .538 (13.67) .610 (15.50) .699 (17.75) .770 (19.56) .840 (21.34) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 18 TERRAPIN SERIES Receptacle SCE2-X-07AXX-XXPX-XXX Receptacle 쮿 Rear Mount Jam Nut Receptacle (-002) (-001) Shell Size ØF ØH ØJ K L M N P S A/F T Max Size 06 Size 07 Size 08 Size 09 Size 10 .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) .750 (19.05) .895 (22.73) .930 (23.62) 1.005 (25.53) 1.080 (27.43) .835 (21.21) .835 (21.21) .835 (21.21) .905 (22.99) .905 (22.99) .738 (18.75) .738 (18.75) .738 (18.75) .808 (20.52) .808 (20.52) .055 (1.40) .055 (1.40) .055 (1.40) .N/A .N/A .155 (3.94) .155 (3.94) .155 (3.94) .080 (2.03) .080 (2.03) .170 (4.42) .170 (4.42) .170 (4.42) .170 (4.42) .170 (4.42) .672 (17.07) .750 (19.05) .825 (20.96) .900 (22.86) .975 (24.77) .157 (4.45) .157 (4.45) .157 (4.45) .157 (4.45) .157 (4.45) .750 (19.05) .895 (22.73) .930 (23.62) 1.005 (25.53) 1.080 (27.43) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 19 Receptacle SCE2-X-71AXX-XXPX-XXX Receptacle 쮿 Front Mount Receptacle, Threaded (-002) (-001) Shell Size ØF ØJ ØH K L M N P S A/F T Size 06 Size 07 Size 08 Size 09 Size 10 .462 (11.73) .575 (14.61) .620 (15.75) .690 (17.53) .760 (19.30) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) .877 (22.28) .877 (22.28) .877 (22.28) .947 (24.05) .947 (24.05) .677 (17.20) .677 (17.20) .677 (17.20) .747 (18.97) .747 (18.97) .015 (0.38) .015 (0.38) .015 (0.38) .N/A .N/A .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .113 (2.87) .130 (3.30) .130 (3.30) .130 (3.30) .060 (1.52) .060 (1.52) .525 (13.34) .685 (17.40) .825 (20.96) .955 (24.26) .995 (25.27) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .100 (2.54) .590 (14.99) .620 (15.75) .760 (19.30) .890 (22.61) .930 (20.62) All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 20 TERRAPIN SERIES Accessories 390-5057-XX-XXX-XX Accessories 쮿 Metal Dust Cap Assembly for Plugs Shell size Part number 06 07 08 09 10 390-5057-06-XXX-XX 390-5057-07-XXX-XX 390-5057-08-XXX-XX 390-5057-09-XXX-XX 390-5057-10-XXX-XX Item 1 Cap Supplied with ØF K Part number .464 (11.79) .545 (13.84) .620 (15.75) .695 (17.65) .770 (19.56) .794 (20.17) .794 (20.17) .794 (20.17) .794 (20.17) .794 (20.17) 390-5057-XXX-XX-01 390-5057-XXX-XX-02 390-5057-XXX-XX-03 390-5057-XXX-XX-04 390-5057-XXX-XX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – – 1 – 1 – – – – – 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 21 Accessories 390-5056-XX-XXX-XX Accessories 쮿 Metal Dust Cap Assembly for Receptacles Shell size Part number 06 07 08 09 10 390-5056-06-XXX-XX 390-5056-07-XXX-XX 390-5056-08-XXX-XX 390-5056-09-XXX-XX 390-5056-10-XXX-XX Item 1 Cap Supplied with ØF K Part number .575 (14.61) .575 (14.61) .750 (19.05) .825 (20.95) .900 (22.86) .664 (16.87) .664 (16.87) .664 (16.87) .664 (16.87) .664 (16.87) 390-5056-XXX-XX-01 390-5056-XXX-XX-02 390-5056-XXX-XX-03 390-5056-XXX-XX-04 390-5056-XXX-XX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 22 TERRAPIN SERIES – 1 – 1 – – – – – 1 Accessories 390-5064-XX-XXX-XX Accessories 쮿 Rubber Dust Cap Assembly for Plugs Shell size Part number 06 07 08 09 10 390-5064-06-XXX-XX 390-5064-07-XXX-XX 390-5064-08-XXX-XX 390-5064-09-XXX-XX 390-5064-10-XXX-XX Item 1 Cap Supplied with ØF K Part number .450 (11.43) .525 (13.34) .595 (15.11) .665 (16.89) .735 (18.67) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) 390-5064-XXX-XX-01 390-5064-XXX-XX-02 390-5064-XXX-XX-03 390-5064-XXX-XX-04 390-5064-XXX-XX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – – 1 – 1 – – – – – 1 All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. TERRAPIN SERIES 23 Accessories 390-5063-XX-XXX-XX Accessories 쮿 Rubber Dust Cap Assembly for Receptacles Shell size Part number 06 07 08 09 10 390-5063-06-XXX-XX 390-5063-07-XXX-XX 390-5063-08-XXX-XX 390-5063-09-XXX-XX 390-5063-10-XXX-XX Item 1 Cap Supplied with ØF K Part number .450 (11.43) .525 (13.34) .595 (15.11) .665 (16.89) .735 (18.67) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) .550 (13.97) 390-5063-XXX-XX-01 390-5063-XXX-XX-02 390-5063-XXX-XX-03 390-5063-XXX-XX-04 390-5063-XXX-XX-05 Item 5 Eyelet Item 6 Item 7 Crimp ferrule Large eyelet – – 1 1 – All dimensions are in inches (mm shown in brackets) and are for reference only. Figure enlarged scale. 24 TERRAPIN SERIES – 1 – 1 – – – – – 1 Accessories HEATSHRINK BOOTS Accessories 쮿 Part number: 123GB-0798-XX-X-0 XX = shell size, for example: 06, 07, 08, 09, or 10 X = S for straight or R for right angled BRAID RETENTION STRAP 쮿 Part number: 123GB-0799-0 Tooling available on request CASTELLATED PANEL NUT 쮿 Add deviation (981) Tooling available on request Overmoulded cable harnesses using Terrapin connectors Amphenol Ltd design, prototype and manufacture a wide range of both standard and customised cable harness assemblies utilising overmould technology. The Terrapin connector range has been designed specifically to lend itself to this method of termination. Amphenol Ltd’s capability in manufacturing is matched by our engineering expertise, we are able to offer a full design and development service from drawing conception to production delivery. Overmoulding has fast become widely recognised for the benefits it brings to equipments used in both Military and Harsh Environment situations. Military and harsh environment situations • Both Standard and Custom profile mouldings available • In-house design and prototype facility • Aesthetically uniform product • Repeatable high complexity mouldings • Low cost and repair by replacement • Robust and tamper-proof • Straight and angled mouldings • Low profile mouldings • Finger grips, logos and tactile indicators optional • Mould material suitable for NBC washdown • High degree of sealing – IP68 Typical applications • Chemical detection units • Comms units • Display Modules • GPS • Headsets • Hubs • LAN Switches • Radios • Routers • Ruggedised laptops • Sensor units • Surveillance and rangefinders • Weapons systems TERRAPIN SERIES 25 Notes 26 TERRAPIN SERIES Notes TERRAPIN SERIES 27 BWC 2725 06/10 Products are sold subject to Amphenol's conditions of sale (“the standard conditions”). All specifications and statements contained herein are believed to be correct at the time of printing, but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. For more information call +44 (0)1227 773200 Amphenol Ltd Thanet Way Whitstable Kent CT5 3JF | Email: terrapin@amphenol.co.uk | www.amphenol.co.uk JUNE 2010 TERRAPIN SERIES 28