132178.

11/27/01 5:05 PM Page 25 SMA COAXIAL CONNECTORS The Connex SMA connectors are semi-precision, sub-miniature, high-frequency connectors which offer reliable broadband performance DC to 18GHz with low reflection and constant 50 ohm impedance. The main features are high mechanical strength, high durability and low VSWR. Matured design principles, careful manufacturing at all stages and a thorough quality assurance organization are the bases for the well-known quality of Connex SMA connectors. ELECTRICAL SPECIFICATIONS Impedance 50 ohm Frequency range *Semi–rigid cable for .141" or .085" O.D. copper jacket: 0–18 GHz *Flexible cable: 0–12.4 GHz Voltage rating *RG–58, 141, 142, 223: 500v peak *RG–174, 188, 316: 375V peak Dielectric withstanding voltage *.141" & RG–58 cable group: 1000V RMS * .085" & RG–316 cable group: 750V RMS VSWR–straight Connectors *f in GHz *.141" semi–rigid cable group: 1.05 + .005f *RG–58 cable group: 1.15 + .01f *RG–174 cable group: 1.15 + .02f *RG–178 cable group: 1.20 + .025f Contact resistance Center: 2.0 milliohms Braid to body: 0.5 milliohms Insulation resistance 5000 Megohms RF leakage -90 db min. at 2–3 GHz Insertion loss db max. = .06 freq. GHz.. Test frequency @6.0 GHz Body: 2.0 milliohms MILITARY SPECIFICATIONS MIL–C–39012 & MIL–C–83517 SMA MATERIAL SPECIFICATIONS PARTS NAME MIL STANDARD ECONOMIC TYPE Body, coupling nut, other metal parts Non-magnetic stainless steel per QQ–S–764 #303 finish: passivated Brass per QQ–B–626 finish: nickel or gold per requirement Contacts Male Brass per QQ–B–626 Brass per QQ–B–626 Female Beryllium copper per QQ–C–530 Beryllium copper per QQ–C–530 heat treated per MIL–H–7199 heat treated per MIL–H–7199 Finish: .00005" min gold plated per Finish: .00005" min gold plated per MIL–G–45204 type 1, Grade C. MIL–G–45204 type 1, Grade C. Insulator PTFE PTFE Gasket Silicone rubber Silicone rubber Crimp ferrule Seamless copper tubing alloy Seamless copper tubing alloy Selection Guide *Suitable for direct mounting on aluminium panels *Lowest cost *For commercial application only *Lower cost 25 SMA COAXIAL CONNECTORS SMA.4 SMA COAXIAL CONNECTORS SMA.4 11/27/01 5:05 PM Page 26 SMA COAXIAL CONNECTORS INTERFACE MATING DIMENSIONS PLUG Letter A B C D Millimeters Minimum 6.35 [.250] 4.53 [.178] 2.54 [.100] 0.00 E F G H J 1.91 [.075] 0.00 0.90 [.035] 0.00 1.24 [.049] [Inches] Maximum 6.73 [.265] 4.59 [.181] 3.43 [.135] 0.25 [.010] 2.54 0.25 0.94 0.38 1.30 [.100] [.010] [.037] [.015] [.051] JACK Letter A B C D E F G H J K Millimeters Minimum 5.28 [.208] 4.60 [.181] 1.88 [.074] 0.00 0.38 [.015] 2.92 [.115] 0.00 4.32 [.170] 1.24 [.049] 5.54 [.218] [Inches] Maximum 5.49 [.216] 4.67 [.184] 1.98 [.078] 0.25 [.010] 1.14 [.045] – 0.25 [.010] – 1.30 [.051] – NOTE: 1. I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH 1.32/1.37 MM DIA. PIN. 26 11/27/01 5:05 PM Page 27 SMA COAXIAL CONNECTORS All connectors listed, unless otherwise noted, are Commercial Grade construction, goldplated brass bodies with 50µ" gold contacts. All insulators are teflon. All other parameters are equal to Mil Standard construction. Mil Standard connectors, i.e. Stainless Steel body, available upon request as per material specifications listed in Material section on preceding page. All dimensions in millimeters and [inches]. 01 01A 01B 02 03 03A 04 04A 05 05A 06 C A B L E 58/ 58A/ 58C/ 141/ 303/ LMR195™/ B7806A 55/ 142/ 223/ 400 LMR200™/ B7807A 58 PLENUM/THINNET/ 122U/ B88240/ B89907 59/ 62/ 140/ 210 59/ U-20AWG 59/ U PLENUM 59/ U PLENUM-20AWG 174/ 188A/ 316/ B7805A 316/ U DOUBLE BRAIDED 179/ 187/ B9221 G 06A 07 07A 07B 07C R O U P L 179/ U DOUBLE BRAIDED 8/ 8A/ 213/ 393 214 8X/ LMR240™/ B7808A B9913/ LMR400™/ B7810A/ B8214 07D B89913 07E 11 07F 11/ U-14AWG/ B8213/ B9292/ B7731/ B1859A 08 6/ 143/ 212 08A B1694A/ B9248 08B 6 PLENUM/ B1695A E G 09 10 11 12 13 14 15 15A 16 17 18 19 E N D B8227/ 89207 .141 SEMI-RIGID/ 402/U .085 SEMI-RIGID/ 405/U .250 SEMI-RIGID .047 SEMI-RIGID/ B1674A 178/ 196 B8281/ B9231/ B9141 B88281 180/ 195/ 122/ B8218/ B1865A/ B1855 LMR6OO™ AT&T734A/ B1505A AT&T735A/ B735A1 DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE SMA COAXIAL CONNECTORS SMA.4 STRAIGHT CABLE PLUG — CABLE CENTER CONTACT P.N. Cable Group 132100 10 Finish Insulation Impedance Crimp Tool Gold N/A 50 N/A 132100SS 10 S/S STAINLESS STEEL N/A 50 N/A 132266 10 Gold SHORT PROFILE N/A 50 N/A 50 N/A 132266SS 10 S/S N/A STAINLESS STEEL, SHORT PROFILE 132100 132266 STRAIGHT CABLE PLUG — WITH CONTACT P.N. Cable Group 132101 132102 11 10 Finish Insulation Impedance Crimp Tool Gold Gold Teflon Teflon 50 50 N/A N/A 132200 10 Gold STAINLESS STEEL Teflon 50 N/A 132248 11 Gold Teflon STAINLESS STEEL NUT 50 N/A 132296 132249 Teflon Teflon 50 50 N/A N/A 132290 10 Gold CONTACT IN BODY Teflon 50 N/A 132294 11 Gold CONTACT IN BODY Teflon 50 N/A 132290-10 10 Gold EXTENDED BODY Teflon 50 N/A 132294-10 11 Gold EXTENDED BODY Teflon 50 N/A 12 13 Gold Gold 132101 132290 Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min 132294-10 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 27 SMA.4 11/27/01 5:05 PM Page 28 SMA COAXIAL CONNECTORS DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE For Cable Group Legend, see page 27 STRAIGHT CABLE PLUG — WITH CONTACT — TORQUE NUT P.N. Cable Group Finish Insulation Impedance Crimp Tool 132179 10 Gold STAINLESS STEEL NUT Teflon 50 N/A 132188 11 Gold STAINLESS STEEL NUT Teflon 50 N/A Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min RIGHT ANGLE CABLE PLUG DC — 12.4 GHz P.N. Cable Group 132112 10 Finish Crimp Tool Teflon 50 N/A 132201 10 Gold STAINLESS STEEL NUT Teflon 50 N/A 132111 132250 Teflon Teflon 50 50 N/A N/A 11 13 Gold Insulation Impedance Gold Gold Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min STRAIGHT CABLE JACK P.N. Cable Group 132104 132103 132257 10 11 13 Finish Gold Gold Gold Insulation Impedance Teflon Teflon Teflon 50 50 50 Crimp Tool N/A N/A N/A Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min BULKHEAD FEEDTHROUGH CABLE JACK — O-RING SEAL P.N. Cable Group 132106 132105 132251 10 11 13 Finish Gold Gold Gold Insulation Impedance Crimp Tool Teflon Teflon Teflon 50 50 50 N/A N/A N/A 132273 13 Gold Teflon EXTENDED BODY .725" 50 N/A Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min 28 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:05 PM Page 29 DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PANEL MOUNT CABLE JACK — 4 HOLE SQUARE FLANGE P.N. Cable Group 132107 132108 132252 11 10 13 Finish Gold Gold Gold Insulation Impedance Teflon Teflon Teflon 50 50 50 Crimp Tool N/A N/A N/A Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min PANEL MOUNT CABLE JACK — 2 HOLE FLANGE P.N. Cable Group 132109 132110 132253 11 10 13 Finish Gold Gold Gold Insulation Impedance Teflon Teflon Teflon 50 50 50 Crimp Tool N/A N/A N/A Cable: .047" Cable, A = 1.24 mm [.049"] min, B = 3.0 mm [.118"] min .085" Cable, A = 2.2 mm [.087"] min, B = 3.0 mm [.118"] min .141" Cable, A = 3.6 mm [.142"] min, B = 4.6 mm [.181"] min RIGHT ANGLE PANEL MOUNT CABLE JACK — 4-HOLE SQUARE FLANGE P.N. Cable Group 132293 132292 11 10 Finish Gold Gold Insulation Impedance Teflon Teflon 50 50 Crimp Tool N/A N/A RIGHT ANGLE PANEL MOUNT CABLE JACK — 2-HOLE FLANGE P.N. Cable Group 132325 132324 11 10 Finish Gold Gold Insulation Impedance Teflon Teflon 50 50 Crimp Tool N/A N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 29 SMA.4 11/27/01 5:05 PM Page 30 SMA COAXIAL CONNECTORS CRIMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 STRAIGHT CRIMP PLUG — STANDARD CABLE Cable Group P.N. 132113 132195 132234 132231 132298 01 01A 01B 07B 07C Finish Gold Gold Gold Gold Gold Insulation Impedance Teflon Teflon Teflon Teflon Teflon 50 50 50 50 50 Crimp Tool A A A A L STRAIGHT CRIMP PLUG — MINIATURE CABLE Cable Group P.N. 132114 05 Finish Insulation Impedance Crimp Tool Gold Teflon 50 B 05 Gold STAINLESS STEEL Teflon 50 B 132174 05 Gold STAINLESS STEEL NUT Teflon 50 B 132178 132193 132242 Teflon Teflon Teflon 50 50 50 C B B 132114SS 05A 14 16 Gold Gold Gold RIGHT ANGLE CRIMP PLUG — STANDARD CABLE Cable Group P.N. 132122 01 Finish Insulation Impedance Crimp Tool Gold Teflon 50 A 01 Gold STAINLESS STEEL Teflon 50 A Teflon Teflon Teflon Teflon 50 50 50 50 A A A L 132122SS 132194 132235 132239 132299 01A 01B 07B 07C Gold Gold Gold Gold RIGHT ANGLE CRIMP PLUG — MINIATURE CABLE P.N. Cable Group 132123 132182 132173 132272 30 05 05A 14 16 Finish Gold Gold Gold Gold Insulation Impedance Teflon Teflon Teflon Teflon 50 50 50 50 Crimp Tool B C B B For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:05 PM Page 31 CRIMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 STRAIGHT CRIMP JACK — STANDARD & MINIATURE CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool STANDARD CABLE 132116 01 Gold 132197 01A Gold 132236 01B Gold 132240 07B Gold 132332 07C Gold Teflon Teflon Teflon Teflon Teflon 50 50 50 50 50 A A A A L MINIATURE CABLE 132117 05 Gold 132198 05A Gold Teflon Teflon 50 50 B C 132229 05 Gold SHORT BODY Teflon 50 B 132279 Teflon 50 B 14 Gold BULKHEAD CRIMP JACK — STANDARD & MINIATURE CABLE P.N. Cable Group Finish Insulation Impedance Crimp Tool STANDARD CABLE 132118 01 Gold 132191 01A Gold 132237 01B Gold 132241 07B Gold 132333 07C Gold Teflon Teflon Teflon Teflon Teflon 50 50 50 50 50 A A A A L MINIATURE CABLE 132119 05 Gold 132176 05A Gold 132220 14 Gold Teflon Teflon Teflon 50 50 50 B C B BULKHEAD CRIMP JACK — O-RING SEAL — STANDARD & MINIATURE CABLE Cable Group P.N. Finish Insulation Impedance Crimp Tool STANDARD CABLE 132280 01 Gold 132281 01A Gold 132282 01B Gold 132283 07B Gold Teflon Teflon Teflon Teflon 50 50 50 50 A A A A MINIATURE CABLE 132284 05 Gold 132285 05A Gold 132286 14 Gold Teflon Teflon Teflon 50 50 50 B C B RIGHT ANGLE BULKHEAD CRIMP JACK — STANDARD & MINIATURE CABLE P.N. Cable Group 132246 132260 132245 132259 01 01A 05 05A Finish Gold Gold Gold Gold Insulation Impedance Teflon Teflon Teflon Teflon 50 50 50 50 Crimp Tool A A B C For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 31 SMA.4 11/27/01 5:05 PM Page 32 SMA COAXIAL CONNECTORS CRIMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 PANEL CRIMP JACK — STANDARD CABLE P.N. Cable Group 132120 132254 01 01A Finish Gold Gold Insulation Impedance Teflon Teflon 50 50 Crimp Tool A A PANEL CRIMP JACK — MINIATURE CABLE P.N. Cable Group 132121 132199 05 05A Finish Gold Gold Insulation Impedance Teflon Teflon 50 50 Crimp Tool B C RIGHT ANGLE PANEL JACK — 4-HOLE FLANGE P.N. Cable Group 132326 132321 132327 05 05A 14 Finish Gold Gold Gold Insulation Impedance Teflon Teflon Teflon 50 50 50 Crimp Tool B C B RIGHT ANGLE PANEL JACK — 2-HOLE FLANGE P.N. Cable Group 132328 132329 132330 32 05 05A 14 Finish Gold Gold Gold Insulation Impedance Teflon Teflon Teflon 50 50 50 Crimp Tool B C B For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:05 PM Page 33 CLAMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 STRAIGHT CLAMP PLUG — STANDARD CABLE P.N. Cable Group 132125 01 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A STRAIGHT CLAMP PLUG — MINIATURE CABLE P.N. Cable Group 132124 05 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 33 SMA.4 11/27/01 5:05 PM Page 34 SMA COAXIAL CONNECTORS CLAMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 STRAIGHT CLAMP JACK — STANDARD CABLE P.N. Cable Group 132127 01 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A STRAIGHT CLAMP JACK — MINIATURE CABLE P.N. Cable Group 132126 05 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A BULKHEAD CLAMP JACK — STANDARD CABLE P.N. Cable Group 132129 01 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A BULKHEAD CLAMP JACK — MINIATURE CABLE P.N. Cable Group 132128 34 05 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:05 PM Page 35 CLAMP TERMINATIONS FOR FLEXIBLE CABLE For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PANEL CLAMP JACK — MINIATURE CABLE P.N. Cable Group 132130 05 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A RIGHT ANGLE CLAMP PLUG — STANDARD CABLE P.N. Cable Group 132132 01 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A RIGHT ANGLE CLAMP PLUG — MINIATURE CABLE P.N. Cable Group 132131 05 Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 35 SMA.4 11/27/01 5:05 PM Page 36 SMA COAXIAL CONNECTORS PRINTED CIRCUIT BOARD/STRAIGHT TERMINALS For Cable Group Legend, see page 27 STRAIGHT PLUG FOR P.C. BOARD P.N. Cable Group 132133 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A STRAIGHT JACK FOR P.C. BOARD P.N. Cable Group 132134 N/A Finish Insulation Impedance 132134 Crimp Tool Gold Teflon 50 N/A 132134-10 N/A Gold SURFACE MOUNT Teflon 50 N/A 132319 N/A Gold EXTENDED BOCY Teflon 50 N/A 132320 N/A Gold 2-HOLE PCB MOUNT Teflon 50 N/A 132291 N/A Gold BULKHEAD MOUNT Teflon 50 N/A 132319 132320 132291 RIGHT ANGLE PLUG FOR P.C. BOARD P.N. Cable Group 132135 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A RIGHT ANGLE JACK FOR P.C. BOARD P.N. Cable Group 132136 Insulation Impedance Crimp Tool Gold Teflon 50 N/A 132225 N/A Gold DIECAST BODY Teflon 50 N/A 36 N/A Finish For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 37 PRINTED CIRCUIT BOARD/STRAIGHT TERMINALS For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 RIGHT ANGLE BULKHEAD JACK FOR P.C. BOARD P.N. Cable Group 132203 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A END LAUNCH JACK RECEPTACLE P.N. Cable Group 132255 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool 132255 N/A .062 board 132289 132289 N/A Gold BULKHEAD MOUNT Teflon 50 N/A 132322 Teflon 50 N/A N/A Gold 132322 .062 board 132270 N/A Gold BULKHEAD MOUNT Teflon 50 N/A 132270 PRESS FIT RECEPTACLE P.N. Cable Group 132264 Finish Insulation Impedance Crimp Tool N/A Gold Teflon 50 N/A 132264SS N/A S/S Teflon 50 N/A 132264-10SS N/A S/S Teflon SOLDER POT CONTACT 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 37 SMA.4 11/27/01 5:06 PM Page 38 SMA COAXIAL CONNECTORS BULKHEAD MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 BULKHEAD JACK RECEPTACLE — FRONT MOUNT P.N. Cable Group 132137 N/A Finish Gold Insulation Impedance Crimp Tool Teflon 50 N/A 132271 N/A Gold Teflon EXTENDED BODY, BLUNT POST 50 N/A 132137 132271 BULKHEAD JACK RECEPTACLE — REAR MOUNT P.N. 132138 Cable Group N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A BULKHEAD JACK RECEPTACLE — REAR MOUNT P.N. 132139 Cable Group Insulation Impedance Crimp Tool Gold Teflon 50 N/A 132227 N/A Gold FLATWASHER Teflon 50 N/A 38 N/A Finish For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 39 PANEL MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE P.N. Cable Group 132140 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE P.N. Cable Group 132141 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE P.N. Cable Group 132142 N/A Finish Gold Insulation Impedance Teflon Crimp Tool 50 N/A 132215 N/A Gold Teflon 50 12.7 mm [.500"] MOUNTING HOLES N/A 132304 N/A Gold Teflon 50 18.2 mm [.718"] MOUNTING HOLES N/A 132142 PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE P.N. Cable Group 132143 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 39 SMA.4 11/27/01 5:06 PM Page 40 SMA COAXIAL CONNECTORS PANEL MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE P.N. Cable Group 132267 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 2-HOLE 90% FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132275 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 2-HOLE 45% FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132276 132288 N/A N/A Finish Gold Gold Insulation Impedance Teflon Teflon 50 50 132276 Crimp Tool N/A N/A Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. 132288 RIGHT ANGLE PANEL MOUNT RECEPTACLE — 4-HOLE FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132318 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. 40 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 41 PANEL MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132144 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A 132300 N/A Gold Teflon 50 N/A 0.25 (.010") contact, 3.17 (.125") Teflon diameter Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132145 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A 132301 N/A Gold Teflon 50 N/A 0.25 (.010") contact, 3.17 (.125") Teflon diameter Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132146 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A 132302 N/A Gold Teflon 50 N/A 0.25 (.010") contact, 3.17 (.125") Teflon diameter Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE — EXPOSED TFE TYPE P.N. Cable Group 132147 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A 132224 N/A Gold Teflon 50 N/A 0.25 (.010") contact, 3.17 (.125") Teflon diameter Remark: Extended teflon insulation available in various lengths. Contact Connex marketing department for part number and availability. For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 41 SMA.4 11/27/01 5:06 PM Page 42 SMA COAXIAL CONNECTORS PANEL MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — BLUNT POST P.N. Cable Group 132148 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — BLUNT POST P.N. Cable Group 132149 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — BLUNT POST P.N. Cable Group 132150 N/A Finish Gold 132204 N/A Gold 6.6 mm [.260"] POST Insulation Impedance Crimp Tool Teflon 50 N/A Teflon 50 N/A PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — BLUNT POST P.N. Cable Group 132151 N/A Finish Gold 132262 N/A Gold 8.37 mm [.330"] POST 42 Insulation Impedance Crimp Tool Teflon 50 N/A Teflon 50 N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 43 PANEL MOUNT/SOLDER POT TERMINALS For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE P.N. Cable Group 132152 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Size of slot width = 0.3 mm [.01"], 0.5 mm [.02"], 0.7 mm [.03"], PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE P.N. Cable Group 132153 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Size of slot width = 0.3 mm [.01"], 0.5 mm [.02"], 0.7 mm [.03"], PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE P.N. Cable Group 132154 N/A Finish Gold Insulation Impedance Teflon Crimp Tool 50 N/A 132214 N/A Gold Teflon 50 12.7 mm [.500"] MOUNTING HOLES N/A 132154 Remark: Size of slot width = 0.3 mm [.01"], 0.5 mm [.02"], 0.7 mm [.03"], PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE P.N. Cable Group 132155 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Size of slot width = 0.3 mm [.01"], 0.5 mm [.02"], 0.7 mm [.03"], For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 43 SMA.4 11/27/01 5:06 PM Page 44 SMA COAXIAL CONNECTORS PANEL MOUNT/HALF ROUND POT TERMINALS For Cable Group Legend, see page 27 PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — HALF ROUND TERMINAL P.N. Cable Group 132156 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — HALF ROUND TERMINAL P.N. Cable Group 132157 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — HALF ROUND TERMINAL P.N. Cable Group 132158 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — HALF ROUND TERMINAL P.N. Cable Group 132159 44 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 45 PANEL MOUNT/TERMINALS FLUSH TO BELOW FLANGE For Cable Group Legend, see page 27 PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQ. FLANGE — TERMINAL FLUSH TO BELOW FLANGE P.N. Cable Group 132160 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Pin size of d = .305 mm [.012"], .381 mm [.015"], .457 mm [.018"] PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — TERMINAL FLUSH TO BELOW FLANGE P.N. Cable Group 132161 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Pin size of d = .305 mm [.012"], .381 mm [.015"], .457 mm [.018"] PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQ. FLANGE — TERMINAL FLUSH TO BELOW FLANGE P.N. Cable Group 132162 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Pin size of d = .305 mm [.012"], .381 mm [.015"], .457 mm [.018"] PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — TERMINAL FLUSH TO BELOW FLANGE P.N. Cable Group 132163 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Pin size of d = .305 mm [.012"], .381 mm [.015"], .457 mm [.018"] For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 45 SMA COAXIAL CONNECTORS SMA.4 SMA.4 11/27/01 5:06 PM Page 46 SMA COAXIAL CONNECTORS PANEL MOUNT/TAB TERMINALS For Cable Group Legend, see page 27 PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — TAB TERMINAL P.N. Cable Group 132164 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — TAB TERMINAL P.N. Cable Group 132165 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Specify horizontal or vertical tab when ordering PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — TAB TERMINAL P.N. Cable Group 132166 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — TAB TERMINAL P.N. Cable Group 132167 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A Remark: Specify horizontal or vertical tab when ordering 46 For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 47 MINIATURE IN-SERIES ADAPTERS For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 PLUG-TO-PLUG ADAPTER P.N. Cable Group 132168 N/A Finish Gold Insulation Impedance Crimp Tool Teflon 50 N/A 132168SS N/A S/S Teflon STAINLESS STEEL BODY 50 N/A JACK-TO-JACK ADAPTER P.N. Cable Group 132169 N/A Finish Gold Insulation Impedance Crimp Tool Teflon 50 N/A 132169SS N/A S/S Teflon STAINLESS STEEL BODY 50 N/A JACK-TO-JACK ADAPTER — BULKHEAD FEEDTHROUGH P.N. Cable Group 132170 N/A Finish Gold 132170-11 N/A Gold O-RING SEAL Insulation Impedance Crimp Tool Teflon 50 N/A Teflon 50 N/A PLUG-TO-JACK ADAPTER P.N. Cable Group 132171 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 47 SMA.4 11/27/01 5:06 PM Page 48 SMA COAXIAL CONNECTORS MINIATURE IN-SERIES ADAPTERS For Cable Group Legend, see page 27 PLUG-TO-JACK ADAPTER — RIGHT ANGLE Cable Group P.N. 132172 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A JACK-TO-JACK ADAPTER — RIGHT ANGLE P.N. Cable Group 132274 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A JACK-TO-JACK-TO-JACK TEE ADAPTER Cable Group P.N. 132216 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A JACK-TO-PLUG-TO-JACK TEE ADAPTER P.N. Cable Group 132217 48 N/A Finish Gold Insulation Impedance Teflon 50 Crimp Tool N/A For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 11/27/01 5:06 PM Page 49 ACCESSORIES For Cable Group Legend, see page 27 SMA COAXIAL CONNECTORS SMA.4 MALE CAP P.N. Cable Group 202112 Gold Insulation Impedance Crimp Tool Teflon 50 N/A 202112SS N/A S/S Teflon STAINLESS STEEL 50 N/A 202112-10 N/A Gold CAP & CHAIN Teflon 50 N/A N/A Gold Teflon SHORTING CAP 50 N/A 132331 N/A Finish For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability. For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability. For Crimp Tool information, see page 183. 49 SMA.4 11/27/01 5:06 PM Page 50