135111-03-M0.75

135111-03-XX.XX NOTES: REVISIONS DRAWING NO. 1. MATERIALS AND FINISHES: REV NC THIRD ANGLE PROJ. SMA BULKHEAD CRIMP JACK SMA RIGHT ANGLE CRIMP PLUG CABLE - DESCRIPTION INITIAL RELEASE B P/N: 132176 P/N: 132182 RG-316 DOUBLE BRAIDED CABLE, DATE ECO APPR 26-Mar-14 2714 CL/BCG 04-Feb-09 SEE SHEET 1 -- -- 2. ELECTRICAL: A. IMPEDANCE: 50 OHM, NOMINAL 3. PACKAGING: SCALE A. QUANTITY: B. BAG TO BE MARKED: 0.625 SINGLE PACK AMPHENOL RF, 135111-03-XX.XX, AND DATE CODE LENGTH AND TOLERANCE (SEE TABLES) HEAT SHRINK TUBING TYP. (2x) RG-316 DOUBLE BRAIDED CABLE SMA BULKHEAD CRIMP JACK LOCK WASHER HEX NUT SMA RIGHT ANGLE CRIMP PLUG PART NUMBER (IMPERIAL) PART NUMBER (METRIC) LENGTH IN INCHES * [METERS] - 135111-03-M0.25 9.84 [0.250] 135111-03-18.00 - 135111-03-06.00 135111-03-12.00 - 135111-03-M0.50 19.69 [0.500] - 135111-03-M0.75 29.53 [0.750] - 135111-03-48.00 135111-03-M1.00 - 18.00 [0.457] 24.00 [0.610] TOLERANCE TABLE LENGTH IN INCHES/FT [METERS] 0" - 23.90" [0 - 0.607] TOLERANCE #0.25" [0.006] 36.00 [0.914] 24.00" - 59.00" [0.610 - 1.499] #0.50" [0.013] 48.00 [1.219] 25.0' & UP [7.620 & UP] #5.0% 39.37 [1.000] 5.0' - 24.9' [1.524 - 7.617] #2.5% * ADDITIONAL LENGTHS CAN BE PROVIDED, CONTACT AMPHENOL RF MARKETING FOR QUOTE X CONTINUITY X HI-POT : 500 VRMS VSWR : ____1 MAX INS. LOSS : ---- dBMAX OTHER UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE AS FOLLOWS: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specificati property of Amphenol Corp. (2) must confidential and not to be disclosed are given by Amphenol Corp. The fur other data by Amphenol Corp., or to not to be regarded by implication or rights or permitting such holder or product, process or design, patented or disclosed by said drawings, speci 6.00 [0.152] 12.00 [0.305] 135111-03-36.00 X FREQUENCY : -----TO------GHz - 135111-03-24.00 DESIGN REQUIREMENTS: 'D' FLAT ORDERING INFORMATION ons, or other data (1) are, and rema be returned upon request; and (3) ar to any person other than those to w nishing of these drawings, specifica any other person to anyone for any p otherwise in any manner licensing, any other person to manufacture, use or otherwise, that may in any way b fications, or other data. in the e hom they tions, or urpose is granting or sell any e related to MATERIAL SEE NOTES REFERENCE DRAWN DATE CLEMENT 13-Mar-14 ENGINEER DATE CLEMENT APPROVED B.C. GLEISSNER CAD FILE 13-Mar-14 DATE 26-Mar-14 TITLE SMA RIGHT ANGLE CRIMP PLUG TO SMA BULKHEAD CRIMP JACK USING, RG-316 DOUBLE BRAIDED CABLE, VARIOUS LENGTHS Amphenol Connex SCALE: 3.0:1 DWG SIZE DRAWING NO. B SHEET 135111-03-XX.XX 2 OF 2 REV B