17E17282

Plated Plastic Backshell ACCESSORIES SPECIFICATIONS: Housing Material: Plating: Grommet Material: Mounting Hardware: ABS Polymer Nickel over copper PVC (UL 94 VO) Steel, clear zinc finish *All materials are RoHS compliant ASSEMBLY INSTRUCTIONS 1. Select the tightest insert that will fit over the cable and thread the cable through it, placing the end with the smaller O.D. (the end without the washer) towards the connector. 2. Cut the jacket, fold the shielding back over the outside of the insert Amphenol’s plated plastic backshell accommodates most standard and high-density D-Subminiature connectors and is appropriate for cable assemblies requiring compliance to FCC 20780. This version is highly durable and provides EMI/RFI protection. The rubber grommet compression insert forces the cable’s shielding against the inside of the cable exit area, assuring shielding. and cut it just short of the washer. 3. Install jackscrews and connector. 4. Place the washer in the outermost depression in the exit area of the hood and screw the cover closed. DIMENSIONS AND ORDERING INFORMATION Shell Size Standard # of Contacts Hi-Density # of Contacts Part # E 9 15 17E-1724-2 A 15 26 17E-1725-2 B 25 44 17E-1726-2 C 37 62 17E-1727-2 D 50 78 17E-1728-2 A B 1.217 (30.91) 1.545 (39.24) 2.000 (50.8) 2.730 (69.34) 2.645 (67.18) 1.547 (39.29) 1.505 (38.23) 1.655 (42.04) 1.830 (46.48) 1.855 (47.12) Dimensions C D 0.640 (16.26) 0.640 (16.26) 0.710 (18.03) 0.906 (23.01) 0.940 (23.88) 0.640 (16.26) 0.640 (16.26) 0.640 (16.26) 0.640 (16.26) 0.440 (11.18) E F 0.400 (10.16) 0.400 (10.16) 0.522 (13.26) 0.726 (18.44) 0.726 (18.44) 0.984 (24.99) 1.312 (33.32) 1.857 (47.17) 2.500 (63.50) 2.406 (61.11) Cable Diameter Range Minimum Maximum 0.210 (5.33) 0.210 (5.33) 0.230 (5.84) 0.350 (8.89) 0.350 (8.89) 0.320 (8.13) 0.320 (8.13) 0.450 (11.43) 0.650 (16.51) 0.650 (16.51) INCHES (MM) 58 TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM