2M801-033-07NF9-19PA

L SHEET 1 OF 4 DOCUMENT NO. 2 FX-678310/19 3 4 REV. REVISIONS DOCUMENT NO. FX-678310/19 LTR N MAX SHEET 1 OF 4 .100 MAX PANEL THICKNESS MASTER KEYWAY L REV. 1 .280 MAX 2 3 DESCRIPTION DATE H (CL II) SEE ECN B6472 10/10/2013 J (CL II) SEE ECN B7770 ---- K (CL II) SEE ECN C0637 4/13/15 L (CL II) SEE ECN D4571 05/02/2018 D 11 STAMP "AMPHENOL", CODED NO, 10 DATE CODE (9-3895) & LOT NO. PER 9-5788 EXAMPLE: AMPHENOL 2M801-033-07NF9-19PA 1121 99999 .060 15 1 7 C C B FLAT SEE SHEET 4 FORMAT: C-U_E-I .100 .101 .150 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. FX-678310/19 SHEET 1 OF 4 4 .209 +.005 -.000 +.020 -.000 +.020 .209 -.000 REV. L Pro/e Model Used: FX-678120_29-XXS .ASSEM NEXT ASSEMBLY CAP, PROTECTION 5,11 FRONT INSERT & SEAL, PIN OR INSERT, SOCKET 3,5 PACKING 5 JAM NUT 5 5 1 4 1 SEE COLUMN 2 1 SEE COLUMN Drawing Name: FX-678310_19 3 IMAGED / Sep. 13 2022, 9:04:59 PM 1 1 UNLESS OTHERWISE SPECIFIED SPECIFICATIONS LINEAR DIMENSIONS ARE IN INCHES TOLERANCES: .XXXX = # .0005 ANGLES= # 2 $ .XXX = # .010 .XX = # .03 .X = # .1 -----------------------DIM.& TOL. PER ASME Y14.5M; DRM PER MIL-DTL-31000; OTHER Amphenol Stds. PER 9-3800 MATERIAL SPEC. LEGENDS: 9-4954-5 9-5662-2 POS SEE NOTE 7 =FLAG NOTE CALL OUT REFERENCE ONLY 1 QTY SEE COLUMN MAIN JOINT GASKET FX-696100/104-() SHELL ,RECEPTACLE PART NUMBER APPROVALS PREPARED BY RBARNES RSELFRIDGE 5 DATE NOTE AMPHENOL CORPORATION 40-60 DELAWARE AVENUE SIDNEY, N.Y. 13838 10-Jun-11 DESIGN ACTIVITY GROUP MIL-AERO-DEVELOP THIRD ANGLE PROJECTION SIZE C RECEPTACLE, JAM NUT ELECTRICAL CONNECTOR 2M801-033-07( )-( )( )( ) CAGE CODE 77820 DOCUMENT NO. FX-678310/19 REF. U REV. L SHEET 1 OF 4 N/A 1 WIP 5 DESCRIPTION SCALE: 5.0 2 5 PARTS LIST PCOLE ENGINEER IN CHARGE DESIGN MANAGER PROCESS SPEC. CONTACTS 10-688772/781-()P 10-696872/880-()P 10-688572/579-()P 10-688372/374-()P OR 10-696805/815-()S 10-678390/399-()S 10-688665/672-()S 10-688617/624-()S 10-688360/362-()S 3 18 L SEE NOTE 5 SOLDER WELL DEPTH PRO/ENGINEER INFORMATION N/A SEE NOTE 5 EPOXY FILM REV. .068 +.005 .130 -.000 .068 12 NOTES: .130 .047 16 A .047 7 10-696199-() FX-678310/19 20 .034 5,13 SHEET 1 OF 4 23 POTTING SEAL 6 SOLDER CUP DATA OD # .002 10-711080/089 8 D THREAD ID # .002 9 DOCUMENT NO. RED FULL MATE INDICATOR BAND RELEASE STATE E THREAD C FLAT 2 PLACES SIZE L .025 2 B REVISION 0 VERSION 16 SHEET 2 OF 4 DOCUMENT NO. L 2 FX-678310/19 3 4 REV. DOCUMENT NO. FX-678310/19 D SHEET 2 OF 4 FRONT ISOMETRIC VIEW (PIN VERSION SHOWN) FRONT ISOMETRIC VIEW (SOCKET VERSION SHOWN) SCALE SCALE 2 2 REV. L 4 4 C 9 3 G SOCKET INSERT .125 MIN C 9 J PIN INSERT FACE .125 MIN 3 0 VERSION 5 5 +.010 -.025 EPOXY DEPTH .025 L X (.358) #23 CONTACT CONNECTOR SIZE 5-10 (.371) #23 CONTACT CONNRCTOR SIZE 13-21 WIP RELEASE STATE (.354) #23 CONTACT CONNECTOR SIZE 5-10 (.367) #23 CONTACT CONNECTOR SIZE 13-21 SECTION A-A L H MAX +.010 -.025 EPOXY DEPTH .025 REV. 9 SHEET 2 OF 4 B EPOXY BACKFILL 9-4954-5 13 EPOXY BACKFILL 9-4954-5 13 SECTION A-A DOCUMENT NO. SEE SHEET 4 A FORMAT: C-U_E-I NOTES: THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. FX-678310/19 FX-678310/19 6 REVISION 6 SIZE C SHEET 2 OF 4 4 77820 SCALE: 5.0 REV. L CAGE CODE 3 IMAGED / Sep. 13 2022, 9:04:59 PM 2 DOCUMENT NO. FX-678310/19 REF: REV. L SHEET 2 OF 4 N/A 1 REV. JAM NUT (POS 2) PACKING (POS 4) GASKET (POS 3) B FLAT C FLAT DOCUMENT NO. L DOCUMENT NO. FX-678310/19 SHEET 3 OF 4 REV. L E THREAD UN-2A D THREAD 9-3200 (PLATED) FX-678310-()() -07()5-()() FX-696681-001 10-247918-255 10-696300-005 .575 .350 .545 .3125-.05P-.1L-2A .3750-28 .244 FX-678311-()() -07()6-()() FX-696681-003 10-247918-252 10-696300-006 .635 .410 .595 .3750-.05P-.1L-2A .4375-28 .330 FX-678312-()() -07()7-()() FX-696681-007 10-247918-254 10-696303-007 .755 .536 .723 .4375-.05P-.1L-2A .5625-32 .432 FX-678313-()() -07()8-()() FX-696681-007 10-247918-254 10-696303-008 .755 .536 .723 .5000-.05P-.1L-2A .5625-32 .493 FX-678314-()() -07()9-()() FX-696681-009 10-247918-250 10-696303-009 .830 .596 .790 .5625-.05P-.1L-2A .6250-28 .551 FX-678315-()() -07()10-()() FX-696681-010 10-247918-256 10-696303-010 .890 .658 .855 .6250-.05P-.1L-2A .6875-28 .620 FX-678316-()() -07()13-()() FX-696681-013 10-247918-251 10-696303-013 1.078 .845 1.044 .8125-.1P-.2L-2A .8750-28 .703 FX-678317-()() -07()16-()() FX-696681-015 10-247918-259 10-696303-016 1.264 1.022 1.230 1.0000-.1P-.2L-2A 1.0625-20 .863 FX-678318-()() -07()17-() FX-696681-016 10-247918-260 10-696303-017 1.325 1.096 1.290 1.0625-.1P-.2L-2A 1.1250-28 .912 FX-678319-()() -07()21-()() FX-696681-019 10-247918-272 10-696303-021 1.625 1.345 1.577 1.3125-.1P-.2L-2A 1.3750-28 1.170 D #23 .018/.022 #20HD .025/.027 #16 .060/.064 C # 12 .092/.096 0 VERSION C CODED NUMBER 2M801-033 PART NUMBER SHEET 3 OF 4 2 FX-678310/19 3 4 A FORMAT: C-U_E-I NOTES: SEE SHEET 4 J +.015 -.007 N MAX .090 .242 .825 .039 .023 .090 .242 .825 .039 FX-678312-()() .023 .090 .242 .825 .039 FX-678313-()() .023 .090 .242 .825 .039 FX-678314-()() .023 .090 .242 .825 .039 FX-678315-()() .023 .090 .242 .825 .039 FX-678316-()() .176 .240 .392 .925 .189 FX-678317-()() .176 .240 .392 .925 .189 FX-678318-()() .176 .240 .392 .925 .189 FX-678319-()() .176 .240 .392 .925 .189 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. FX-678310/19 L SIZE C SHEET 3 OF 4 4 REVISION FX-678311-()() WIP .023 RELEASE STATE FX-678310-()() 9 X L H MAX L CAGE CODE 77820 SCALE: 5.0 REV. 3 IMAGED / Sep. 13 2022, 9:04:59 PM 2 FX-678310/19 B G +.007 -.005 REV. SEE FINISH DATA TABLE PART NUMBER SHEET 3 OF 4 2 DOCUMENT NO. 1 DOCUMENT NO. FX-678310/19 REF: REV. L SHEET 3 OF 4 N/A 1 REV. SHELL KEY POSITIONS 2 SHEET 4 OF 4 REV. L PLATING CODE FINISH COMPONENT PREFIX NF THICK OD CADMIUM NICKEL BASE F9- A 150 $ 210 $ ZNU BLACK ZINC NICKEL F2- B 75 $ 210 $ M THICK ELECTROLESS NICKEL FH- C 95 $ 230 $ MT DURMALON F7- D 140 $ 275 $ ZN GREEN ZINC NICKEL F4- E 75 $ 275 $ BEN BLACK ELECTROLESS NICKEL FJ- F 95 $ 210 $ 17 DOCUMENT NO. L DOCUMENT NO. FX-678310/19 FINISH DATA SHEET 4 OF 4 2 FX-678310/19 3 4 AB $ AC $ D AB AC C C 18. REFER TO ASSEMBLY INSTRUCTIONS FOR EPOXY FILM (POS 8) PLACEMENT. B 9-7015 SEE NOTE 17 6. PACKAGE PER PRODUCTION PROCESS SHEET. 5. SEE SEPARATE PARTS LIST FOR COMPONENT PART NUMBERS AND QUANTITIES. 4. DRAWING ILLUSTRATES FINAL ASSEMBLY. 3. INSERT ASSEMBLY IS NOT REMOVABLE. 2. ALTERNATE ROTATIONS ARE OBTAINED BY ROTATING INDICATED KEYS. SIX POSITIONS ARE AVAILABLE. SEE 9-2437-42 AND/OR SHELL KEY POSITIONS TABLE. 1. FOR CONTACT ARRANGEMENT PATTERN, SEE DRAWINGS L-21805-M() THRU L-21821-M() ALTERNATE POSITIONS THEREON DO NOT APPLY. A 0 L REVISION WIP RELEASE STATE CC/SEC He. 13. PLASMA TREAT AND BACKFILL REAR OF CONNECTOR WITH 9-4954-5 EPOXY PER 9-9305 TO INDICATED DEPTH. IF NO POTTING SEAL (10-711080/089) IS AVAILABLE APPLY 9-5662-2 AROUND CONTACTS AND CURE FOR 16 HOURS MINIMUM AT ROOM TEMPERATURE, WITH A MINIMUM RELATIVE HUMIDITY OF 20%. 12. CONNECTOR CODE LOGIC 2M801-033-07NF10-26PA PREFIX SHELL KEY POSITION BANDED SHELL CONTACT TYPE SHELL STYLE INSERT ARRANGEMENT SHELL FINISH SHELL SIZE 11. SEE DOCUMENTS 10-70500 FOR APPROPRIATE SIZE PROTECTION CAP. NOTES: FORMAT: C-U_E-I -4 L 7. PROCESS SPEC: TEST 9-5044-18, 9-3485 ASSY 9-5047-27 9-5788, 9-3200, 9-3895, 9-2437-42, 9-9305, 14. HELIUM LEAK TEST EACH ASSEMBLY PER 9-3485 TO 1X10 THE USE OF THIS DOCUMENT IS UNLIMITED. HOWEVER, DOCUMENTS REFERENCED HEREON MAY CONTAIN LIMITED RIGHTS DATA. DOCUMENT NO. FX-678310/19 SIZE C SHEET 4 OF 4 4 77820 SCALE: 3.0 REV. L CAGE CODE 3 IMAGED / Sep. 13 2022, 9:04:59 PM 2 FX-678310/19 8. FOR MATING CONNECTOR, SEE FX-678080/89 AND OTHERS. 15. SOLDER CUP PIN CONTACT IS USED IF P/N SUFFIX IS E, V, Q, Y, Z, OR 2 SOLDER CUP SOCKET CONTACT IS USED IF P/N SUFFIX IS F, 4, 5, 6, 7, OR 8 REV. DISTANCE FROM FACE OF SHELL TO THE POINT AT WHICH A GAGE PIN HAVING THE SAME BASIC DIAMETER AS THE MATING CONTACT AND A SQUARE FACE, ENGAGES SOCKET CONTACT SPRING. DOCUMENT NO. 9. 16. PC TAIL PIN CONTACT IS USED IF P/N SUFFIX IS P, G, I , K, M, OR R PC TAIL SOCKET CONTACT IS USED IF P/N SUFFIX IS S, H, J, L, N, OR T SHEET 4 OF 4 10. SEE WORK ORDER FOR PERMISSIBLE ADDITIONAL OR ALTERNATE STAMPING. GAS. VERSION 17. PRIOR TO INK STAMPING (DURMALON ONLY), PLASMA TREAT PER 9-7015 USING ARGON DOCUMENT NO. FX-678310/19 REF: REV. L SHEET 4 OF 4 N/A 1