51726-11301200A0LF

POWER SOLUTIONS PWRBLADE® CONNECTOR SYSTEM OVERVIEW The PwrBlade® power distribution connector system from FCI includes power and signal contacts to provide power distribution and power control in a single connector. Options for either vertical or right-angle versions of PCB-mount headers and receptacles deliver support for coplanar, backplane or mezzanine connections. The connectors are ideal for robust power connections to embedded AC/DC power supplies or for board-to-board connections in servers, storage enclosures and communications equipment. Initially developed to enable the implementation of Server System Infrastructure (SSI), Standards for Distributed Power Supplies (DPS), Mid-range Power Supplies (MPS), Highend Power Supplies (HPS) and PwrBlade® connectors are also available in wide variety of other configurations with either solder or pressfit board termination. The connectors can also be customized to address unique application requirements. PwrBlade® connectors can be provided with one to 20 power contacts and zero to 148 signal contacts. Individual power contacts are rated at 48A current-carrying capacity; connector configurations with multiple power contacts are rated at 30A per power contact as tested for 30°C temperature rise in still air. An available cable port option provides segregated AC contacts for cable pass-through applications. Capability for two levels of sequential mating for power contacts and two levels for signal contacts can support up to three levels of sequencing of power and signals. Sequential mating of ground, followed by power and signals can be used to provide “hot swap” capability. Molded guide posts on the header engage with the corresponding receptacle connector to assure alignment during blind-mating. FEATURES & BENEFITS • 48A/individual power contact; 30A/contact for 10 adjacent contacts at 30°C temperature rise in still air • Meets applicable UL current interruption criteria for hot plug applications • 60A/contact using UL test guidelines • Rugged, molded-in guides enable blind mating • SSI-compliant connector interface for pluggable power supplies & power distribution applications TARGET MARKETS/APPLICATIONS • Provides power contacts for power distribution and signal contacts for power control • Number and placement of power and signal contacts are highly configurable for custom power needs • Power contact spacing options exist for AC (300V max), DC (200V max) or high-density power (at same voltage) • AC/DC pluggable power supplies in data, telecom & datacom/networking • Server System Infrastructure (SSI)-compliant server systems • Industrial PCs • Industrial controls & instrumentation PWRBLADE® CONNECTOR SYSTEM TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housings: high-temperature thermoplastic (UL94V-0), black • Product Specification: GS-12-149 • Application Specification: BUS-20-067 • Contact base material: • Power – high-conductivity copper alloy • Signal – copper alloy • PwrBlade® Worksheets for custom design or layout • 51696 – Vertical header • 51697 – R/A header • Contact finish:  • Separable interface: 30μin. (0.76μm) performance-based plating over nickel • Board termination area: Matte tin over nickel • 51698 – Vertical receptacle • 51699 – R/A receptacle Contact your local FCI representative to obtain these worksheets. ELECTRICAL PERFORMANCE TOOLING • Insulation resistance • Power contact: 10,000MΩ • Signal contact: 500MΩ • For press fit tooling contact your local FCI sales representative • Withstanding voltage • Power contact: 2,500V DC • Signal contact: 1,000V DC APPROVALS AND CERTIFICATIONS • Current rating: 48 Amps for single powered contact; de-rated to 30 Amps for 10 powered contacts at 30°C temperature rise with zero airflow PACKAGING • Current rating: 60 Amps per contact per UL test guidelines when 10 contacts are fully energized TEMPERATURE RISE CURVE • UL, CSA and TUV approved • Trays • Power contact resistance: ­0.7 mΩ after environmental exposure MECHANICAL PERFORMANCE • Mating force: • 25 ounces per power contact • 3.5 ounces per signal contact PART NUMBERS Description Part Numbers Power+Signal+Power 51720-1XXXXXXXXXLF Power+Signal+Power Vertical Header 51700-1XXXXXXXXXLF Power+Signal+Power Right Angle Receptacle 51760-1XXXXXXXXXLF Power+Signal+Power Vertical Receptacle 51740-1XXXXXXXXXLF For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. PWRBLADE® CONNECTOR SYSTEM PART NUMBERS SERVER SYSTEM INFRASTRUCTURE (SSI STANDARD) High-End Power Supply (1 Power + 24 Signal + 12 Power Configuration) Part Numbers Server Right Angle Receptacle 51416-001 Vertical Press-Fit Receptacle 51666-001 Power Supply Right Angle Header 51415-001LF Vertical Header 51952-001LF Vertical Press-Fit Header 51952-002LF High-End Power Supply (24 Signal + 12 Power Configuration) Server Right Angle Receptacle 51261-XX001LF Vertical Press-Fit Receptacle 51617-XX002LF Power Supply Right Angle Header 51219-XX002LF Mid-Range Power Supply (5 Power + 24 Signal + 6 Power Configuration) Server Right Angle Receptacle 51625-XX001LF Vertical Press-Fit Receptacle 51667-XX001LF Power Supply Right Angle Header 51624-XX001LF Vertical Header 51860-001LF Vertical Press-Fit Header 51860-002LF AC Cable Port Right Angle Receptacle Cable+Power+Signal+Power 51894-YYYLF Cable+Signal+Power 51921-YYYLF Cable+Power+Signal 51923-YYYLF Cable+Power+Signal+Power 51897-YYYLF Cable 51897-YYYLF Power+Signal+Cable 51897-YYYLF/ 51927-YYYLF Cable+Power+Signal 51929-YYYLF For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. PWRPWRBLADE0613EA4 AC Cable Port Vertical Receptacle