62GB-12E12-10SN

62GB- Series Miniature Bayonet Lock Connectors Designed to meet MIL-C-26482 Amphenol 62GB and Pattern 608 New Planforms Current: Current: (a) (a) Maximum current per individual contact (in isolation)* at ambient temperature of 85°C Maximum current per individual contact (in isolation)* at ambient temperature of 85°C Contact size 12: 23 A Contact size 8: 45 A (b) Maximum current per contact through all contacts simultaneously at an ambient temperature of 85°C (b) Contact size 12: 20 A Maximum current per contact through all contacts simultaneously at an ambient temperature of 85°C Contact size 8: 40 A Voltage rating Working voltages ** (nominal) d.c. or a.c. peak Voltage proof d.c. or a.c. peak *
** Sea level 1013 mbar
I II III 700 1200 1500 8500m (27,900ft) 320 mbar I II III 550 650 800 21,340m (70,OOOft) 44 mbar I II III 330 380 450 2100 1100 660 3000 3000 1300 i.e. when only one contact per connector is electrically loaded. 1 mbar=102 N/m2=100 Pa Establishment of electrical safety factors is the responsibility of the user 1300 760 750 CONTENTS Amphenol 62GB Solder Connectors Page 1 Schedule of Tests 2-3 Connector Styles Available 4-5 Insert Availability 6-7 Ordering 62GB Series Connectors 8-9 Box Mounting Receptacles - Table of Styles 10-11 Box Mounting Receptacles 12-16 Single Hole Fixing Receptacles - Table of Styles 17-19 Single Hole Fixing Receptacles 20-27 Cable Mounting Receptacles - Table of Styles 28 Cable Mounting Receptacles 29-31 Plugs - Table of Styles 32-33 Plugs 34-39 Accessories - Table of Styles 40-41 Accessories 42-48 Cable Accessories - Table of Styles 49-50 Cable Accessories 51-55 Insert Orientations 56 Key/Keyway Orientations 57 Assembly Instructions 58-61 Wire Stripping 62 Torque Details 62 Amphenol ® 62GB solder connectors This miniature bayonet lock connector series offers designers important features not found in any other range of connectors. 62GB Series connectors – compliant to the United States Military Specification MIL-C-26482E on certificate No. 1713. They are the first and only British connectors to have achieved this. A doubly strong position which Amphenol are well geared to handle. The manufacturing facilities of the Whitstable plant have been cited as exemplary in Europe. Certainly the layout is extensive and extremely efficient. 62GB Series connectors have been well established with Government authorities on an international scale and users can be found in Sweden, Denmark, Norway, Finland, Germany, Spain, Holland, India, Canada and Italy. Derating Connectors must be derated under the following operating conditions: 1. At elevated ambient temperatures, the current ratings are reduced so that total maximum hot spot temperature of 125°C is not exceeded. 2. At high altitudes, revised voltage ratings become effective as shown on page 7. 3. When connectors to different specifications are intermated, the combination must not be operated under conditions more severe than the less stringent clause of either specification. Basic Construction 62GB Series can be supplied in brass or stainless steel. The normal shell finish used, which has a high resistance to corrosion, is zinc cobalt olive drab. Other finishes may be supplied to special order, such as cadmium plate which is available by adding deviation (714) to the end of part number. For other finishes available, please see part number breakdown Inserts are of polychloroprene rubber compounded to an Amphenol specification. Operating temperature range is -55°C to 125°C, and the connectors have gold-plated contacts designed for soldered connections. Configurations for size 20 contacts range between 2 contacts in the size 8 12.7mm (0.5in diameter) shell up to a maximum of 61 contacts in the size 2436.1 mm (1.5in diameter) shell. Intermediate sizes, and contact data for heavier current ratings are shown in the insert availability chart on page 6 and 7. Hermetic connectors with glass sealed dielectric are manufactured with mild steel shells and nickel iron contacts plated tin over copper. * Other finishes are available on request. Protection Against Mis-Mating or Cross-Plugging Positive shell-to-shell keying is provided with keys and keyways in a choice of either the normal (N) or any of the four preferred alternate positions: B, C, E and F. This prevents mismating between shells of different orientations and overcomes the difficulties associated with rotated inserts and a standard key-keyway orientation. In the latter system, damage to the inserts or contacts can result if excessive force is used to engage non-mating pairs. Rotated inserts are available in positions w, x, y and z. These are to be requested via the part number configuration. See part number breakdown. 1 Schedule of Tests Required for Qualification Approval Tests Brief Description Visual Examination Dimensions, outline mass(including contacts) Compatibility Gauging procedure Polarization Engaging and separating force, connector Engagement max: 0,90 Nm (8.0 lbf.in.) to 4,97 Nm (44 lbf.in.) according to shell size. Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58 Nm (14.0 lbf.in.) according to shell size. Contact Holding Force 0,21 N (0.047 lbf) min.size 20 0,56 N (0.126 lbf)min. size 16 Sealing (air pressure) Max leakage 28,53 uNm/s (1 cm3/h), 1 bar (14.5 p.s.i.) differential. Sealing Hermetic Hermetic receptacles have a max leak of 0.1 micron cubic foot per hour (1 x 10-6Cm3/s) Contact Resistance 5 milliohms max. Housing (Shell) Continuity 200 milliohms max. 5 milliohms max. grounding spring styles. Plating dependant. Insulation Resistance 5,000 Megaohms at 500 - 50 V d.c. Voltage Proof See page 7. Duration 1 minute Soldering As BS 9520: 1983, Clause 1.2.6.7, Method 2. Bit temperature of +350oC Bumping As BS 9520: 1983, Clause 1.2.6.2. 4,000 -10 bumps / 390m / s2 (40 gn). Sine Vibration As BS 9520: 1983, Clause 1.2.6.3. Procedure A. 10 Hz to 5000 Hz, 0.75 mm / 10 gn. Shock As BS 9520: 1983, Clause 1.2.6.4. 981 m/s2 (100 g n). Acceleration (Steady State) As BS 9520: 1983, Clause 1.2.6.5. 490 m/s2 (50 gn). Rapid Change of Temperature As BS 9520: 1983, Clause 1.2.6.8. -550C to +125oC one hour at each temperature = 1 cycle. 5 cycles to be completed Climatic Sequence As BS 9520: 1983, Clause 1.2.6.12. Severity 55/125/56. Flammability As BS 9520: 1983, Clause 1.2.6.9. Direct flame applied, duration 1 minute. Damp Heat (Steady State) As BS 9520: 1983, Clause 1.2.6.15. Severity 56 days. 2 Schedules of Tests Required for Qualification Approval Tests Brief Description Immersion (at low air pressure) 3 cycles at 30 mins each cycle, total immersion in water at pressure 44 m bar. Mechanical Endurance 500 operations minimum High Temperature Endurance Long term: 1,000 hrs. at 850 C ambient carrying the specified current. Short term: 250 hrs at 1250 C, no current. Mould Growth As BS 9520: 1983, Clause 1.2.6.15. 28 days duration. Salt Mist (plating dependant) As BS 9520: 1983, Clause 1.2.6.17. Severity 1. Four spray periods of 2 hours with a humidity storage period of seven days after each Dust As BS 9520: 1983, Clause 1.2.6.18 Exposure 30 minutes. Robustness of Terminations 44,5 N (101bf) size 16 22,2 N (5 lbf) size 20 Contact Retention (in insert) 67,0 N (15 lbf) min. size 20 112,0 N (25 lbf) min. size 16 and above Insert Retention (in shell) 517 KN1m2 (751bf/in 2 min. Test Prod Damage Moment: 0,056 Nm (0.5 lbf in) size 20 0,225 Nm (2 lbf in) size 16 Impact Five impacts, drop height 1 m (3ft.3 in.). Grounding Spring Holding Force Plugs with grounding springs only. Fluid Resistance Compass Safe Distance 1,17 N (0.263 lbf) to 2,74 N (0.616 lbf) according to size. Immersion in 4 solvents and 9 fluids including aircraft fuels, lubricating oils and hydraulic fluids. As BS 9520: 1983, Clause 1.2.5.12. 127 mm (5.0 in) min. 3 Connector Styles Available Receptacles Box Mounting See Pages 10-16 Accessories See Pages 40-55 Single Hole Mounting See Pages 17-27 Cable Mounting See Pages 28-31 Hermetic Seal See Pages 16 & 23 4 Connector Styles Available Plugs Straight Plug See Pages 34-37 Accessories See Pages 40-55 Grounded Plug See Page 34 Audio Plug See Page 38 Push on - Pull off See Page 39 5 Insert Availability CURRENT RATING NOTES * This insert arrangement is not included in B.S. spec., but is available and. listed in MIL-C-26482.
Due to the arrangement of contacts in the 14-12 insert arrangement it is classified, for current derating, in the shell size range 18-24. Lettering of inserts shown above corresponds to view of front (mating surface of pin inserts or rear face (cable accessory end) of socket inserts. KEY • No 16 size contacts O No 20 size contacts Maximum current per individual contact (in isolation) at a maximum ambient temperature of 85°C: Size 20 contact 7.5A Size 16 contact 13A The performance of 62GB Series connectors at all times exceeds the maximum continuous bunched rating of the appropriate size wire, or cable of equivalent temperature rating. This bunched rating is therefore the determining factor. In the case of mixed loadings, the greatest individual load shall be the bunched loading. In any combination of ambient temperature plus temperature rise due to current flow through the contacts, the maximum connector internal hot spot temperature of 125°C must not be exceeded. That is, when only one contact per connector is loaded. 6 Insert Availability VOLTAGE RATINGS 22 24 22-55 24-61 ALTITUDE D.C. WORKING VOLTAGE A.C. WORKING VOLTAGE R.M.S. PROOF VOLTAGE D.C. OR A.C. PEAK Rating 1 Sea level 700 500 2100 300 mb at 20°C 8,500m (27,800 ft) 550 390 1100 44 mb at 20°C 20,000m (66,000 ft) 330 230 660 Rating 2 Sea level 300 mb at 20°C 8,500m (27,800 ft) 44 mb at 20"C 20,000m (66,000 ft) 120 0 850 3000 650 460 1300 380 270 760 VOLTAGE RATINGS Two categories of voltage rating are specified in BS9522 F0017, F0038 and N0001. Rating 1 (700V d.c. working at sea-level) Applicable to the high contact density inserts shown in the upper section of the insert availability diagram above. Rating 2 (1200V d.c. working at sea-level) Applicable to the inserts shown in the lower section of the insert availability diagram. ALTITUDE-THOUSANDS OF FEET (METRES) Relationship between flashover voltage and altitude for each voltage rating Altitude derating. Information on voltage derating for operation at altitudes above sea-level can be obtained from the flashover voltage altitude curves on the left. 7 Ordering 62GB Series Connectors To obtain the specific connector required write down the connector number from the typical example below. Only inserts shown in the availability chart on p. 10&11 can be specified. All connectors are delivered with protective dust covers SHELL STYLE 62GB 1 Series designation 62ZN – Zinc Nickel finish 62 GB - Aluminium shell 62 GB SS -Stainless steel shell* 62 GB CU - Brass shell* *consult factory for availability 62GB-XXH-Hermetic mild steel shell. 4 Specification key 1 - Styles originally specified in MIL-C-26482 5 - Styles exclusive to BS9522 F0017 E Shell style 0 - Receptacle wall mounting 1 - Receptacle cable mounting 2 - Receptacle box mounting 3 - Receptacle, solder flange mounting 4 - Receptacle, internally threaded with cable accessories as illustrated, for single hole mounting 6 - Plug cable mounting 7- Receptacle, plain shell, single hole mounting Environmental code A - Plain shell, exposed solder buckets. No grommet E - Insert seal and grommet seal with grommet nut (excluding 12E which has plain shell and no grommet or nut) F - As (E) but grommet nut has integral strain relief clamp H - Hermetic seal no cable accessories J - As (E) but with resilient gland seal and nut for unscreened jacketed cable. No grommet supplied. See pp. 26-27 for accessory to accept screened jacketed cable. P - Potting construction complete with potting mould T - Exposed solder buckets. Threaded shell for cable accessories HOW TO ORDER FROM MS CONNECTOR NUMBERS Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specified in MIL-C-26482 which does not include alternative key/keyway orientations. MS31 62GB - 14 14 E E 18 -11 18 -11 P P X X 8 Ordering 62GB Series Connectors INSERT ARRANGEMENT 18 11 Shell size (in sixteenths of an inch) 8, 10, 12, 14, 16 18,20,22,24 62GB - 14E C2098 Style Number of contacts 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 16, 19, 21', 23, 26, 32, 41, 55, 61 * consult factory for availability 18-11 18 11 Insert Arrangement, see above P Contact Style P - Pins S - Sockets For hermetic connectors. P3 denotes pin contacts with solder bucket terminations. (Standard range). P2 denotes pin contacts with flattened and pierced terminations. (Special order). P M M - Pin contacts F - Socket contacts B (044) Orientation (Omit if normal orientation) Keys/Keyways: A', B, C, D', E. F, (see p. 31) Inserts: W,X,Y,Z.(see p56/57) *Inactive for new designs Deviations (044) Rough grip heavy duty coupling ring. (046) Box mounting plug. (214)Fitted with extension back shell and strain relief clamp without grommet on F types only (218) Lever coupling ring (219)Contacts for flexible punted wrung (57A and 12E only) (639) Bright cadmium plated shells (345) Contacts for flexible punted wiring 12H,13H 17H only (276) Hermetics with gold plated contacts. (608) Black anodise. (416) Electroless nickel (714) Cadmium plate olive drab B B Alternative Key/Key way Orientation O Variant. 0 – Standard connector 9 Box Mounting Receptacles Table of Styles Page No. 62GB-50T 12 62GB-10A 12 62GB-10E 13 62GB-10F 13 62GB-10J 14 62GB-10P 14 62GB-12E 15 10 Box Mounting Receptacles Table of Styles Page No. 62GB-12E(219) 62GB-12H 15 16 Hermetic Seal 11 Box Mounting Receptacles 50T 62GB-50T 4-hole flange mounting with threaded shell to accept standard cable accessories. Shell Size 08 10 12 14 16 18 20 22 24 A max 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26.62 1.048 26.62 10A B ± 0.005 (± 0.13) 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 c max sq. 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 D TP Sq. 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E dia. ± 0.010 (± 0.254) 0120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0147 3.d4 F ±0 005 (± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 1410 0.555 14.10 0.590 14.99 G dia max. 0.434 11.02 0.558 14.17 0.683 17.35 0.808 20.52 0.933 23.7 1.057 26.85 1.182 30.02 1.307 33.20 1.432 36.37 Y dia. max. 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.1 X Thread 7/16 – 28 UNEF 9/16 – 24 NEF 11/16 - 24 NEF 13/16 – 20 UNEF 15/16 – 20 UNEF 1.1/16 - 18 NEF 1.3/16 - 18 NEF 1.5/16 - 18 NEF 1.7/16 – 18 NEF 62GB-10A 4-Hole flange mounting with general duty back shell. No grommet supplied. Shell Size 08 10 12 14 16 18 20 22 24 A max. 1.624 41.25 1.624 41.25 1.624 41.25 1.624 41.25 1.624 41.25 1.624 41.25 1 .687 42.85 1.687 42.85 1.730 43.94 B ± 0.005 ( ± 0.13) 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 C Max. sq. 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 D TP sq. 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E ± 0.010 ( ± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3 05 0.120 3.05 0 147 3.73 F ± 0.005 ( ± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia max. 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.98 1.186 30.12 1.311 33.30 1.436 36.47 1.561 39.65 Y dia. max. 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1 250 31.75 1.375 34.93 1.500 38.1 M 1/2 - 28 UNEF 5/8 - 24 NEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1.3/16 - 18 NEF 1.3/16 - 18 NEF 1.7/16 - 18 NEF 1.7/16 - 18 NEF 12 Box Mounting Receptacles 10E 62GB-10E MIL-C-26482 MS3110E 4-hole flange mounting with grommet and grommet nut Shell Size 08 10 12 14 16 18 20 22 24 A max 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.383 35.13 1.383 35.13 1 .383 35.13 10F B ± 0.005 ( ± 0.13) 0.062 1 .58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 C max sq. 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 D TP sq. 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E ± 0.010 (± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.147 3.74 F ± 0.005 (± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.98 1.186 30.12 1.311 33.30 1.436 36.47 1.561 39.65 V dia. max 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.1 62GB-10F MIL-C-26482 MS31 10F 4-hole flange mounting with grommet and grommet nut fitted with integral strain relief clamp Shell Size 08 10 12 14 16 18 20 22 24 A max. 1.762 44.76 1.762 44.76 1 .762 44.76 1.736 44.10 1.876 47.65 1.876 47.65 2.118 53.80 2.118 53.80 2.250 57.15 B ± 0.005 (± 0.13) 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.57 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 C max. sq. 0.817 20.75 0.942 23.92 1.036 26.31 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 D TP Sq. 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E ± 0.010 (± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 1.147 3.74 F ± 0.005 (± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia max. 0.828 21.03 0.891 22.63 1.016 25.81 1.141 28.98 1.203 30.56 1.426 36.22 1.426 36.22 1.567 39.80 1.735 44.07 H ± 0.005 (± 0.13) 0.156 3.96 0.188 4.78 0.312 7.93 0.375 9.58 0.500 12.7 0.625 15.87 0.625 15.88 0.750 19.05 0.800 20.32 Y dia. max. 0.473 12.01 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 13 Box Mounting Receptacles 10J 62GB-10J 4-hole flange mounting with clamp for unscreened jacketed cable. No grommet supplied Shell Size 08 10 12 14 16 18 20 22 24 A max 1.846 46.89 1.846 46.89 1.947 49.45 2.147 54.54 2.347 59.61 2.547 64.70 2.831 71.91 3.031 76.99 3.074 78.08 10P B ± 0.005 ( ± 0.13) 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.575 0.062 1.575 0.080 2.03 0.080 2.03 0.080 2.03 c max.sq D TP sq 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 E ± 0.010 ( ± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.147 3.73 F ± 0.005 (± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia. max. 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.96 1.186 30.12 1.311 33.30 1.436 36.47 1.561 39.65 Y dia max 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.1 Z Cable Entry min max closed free 0.168 0.230 4.28 5.84 0.205 0.312 5.21 7.93 0.338 0.442 8,59 11.23 0.416 0.539 10.57 13.69 0.550 0.616 13.97 15.65 0.600 0.672 15.24 17.07 0.635 0.747 16.13 18.98 0.670 0.846 17.02 21.49 0.740 0.894 18.80 22.71 62GB-10P 4-hole flange mounting for potting Shell Size 08 10 12 14 16 18 20 22 24 A max 1.453 36.91 1.453 36.91 1.453 36.91 1.453 36.91 1.453 36.91 1.453 36.91 1.672 42.47 1.672 42.47 1.734 44.05 B ± 0.005 (± 0.13) 0.062 1.575 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 c max.sq. 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 0.692 42.98 D TP sq 0.594 15.09 0.179 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E ± 0.010 (± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.147 3.74 F ± 0.005 (± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia. max 0.572 14.53 0.666 16.92 0.822 20.88 0.907 23.04 1.040 26.42 1.165 29.60 1.285 32.64 1.400 35.56 1.540 39.12 Y dia. max 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 Z dia. min 0.260 6.60 0.463 11.76 0.577 14.15 0.590 14.99 0.713 18.11 0.835 22.21 1.015 25.78 1.015 25.78 1.265 32.13 14 Box Mounting Receptacles 12E 62GB-12E MIL-C-26482 MS3112E Shell Size 08 10 12 14 16 18 20 22 24 A max 8 ± 0.005 (± 0.13) 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26.62 1 .048 26.62 12E (219) C max sq. 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 D TP sq. 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 E ± 0 010 (± 0.254) 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.147 3.74 F ± 0.005 ( ± 0.13) 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 G dia. max. 0.434 11.02 0.558 14.17 0.683 17.35 0.808 20.52 0.933 23.70 1.057 26.85 1.182 30.02 1.307 33.20 1.432 36.37 L V dia. max. 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.1 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.875 22.23 0.875 22.23 0.875 22.23 62GB-12E (219) 4-hole flange mounting with plain shell with film wire terminations Shell Size 08 10 12 14 16 18 20 22 24 A max B ± 0.005 (±0.13) C max sq. D TP sq. E dia 0.010 F ± 0.005 (± 0.13) G dia. Max J ± 0.020 (± 0.51) K L min max. max 0.982 24.95 0.982 24.95 0.982 24.95 0.982 24.95 0.982 24.95 0.982 24.95 1.057 26.85 1.057 26.85 1.057 26.85 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1 .58 0.062 1.58 0.080 2.03 0.080 2.03 0.080 2.03 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 0.594 15.09 0.719 18.26 0.812 20.63 0.906 23.10 0.969 24.61 1.062 26.58 1.156 29.36 1.250 31.75 1.375 34.93 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.147 3.74 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.445 11.3 0.555 14.10 0.555 14.10 0.590 14.99 0.434 11.02 0.558 14.17 0.683 17.35 0.808 20.52 0.933 23.70 1.057 26.85 1.182 30.02 1.307 33.20 1.432 36.37 0.089 2.26 0.089 2.26 0.089 2.26 0.089 2.26 0.089 2.26 0.089 2.26 0.076 1.93 0.076 1.93 0.076 1.93 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.028 0.70 0.198 5.03 0.198 5.03 0.198 5.03 0.198 5.03 0.198 5.03 0.198 5.03 0.185 4.70 0.185 4.70 0.185 4.70 Z min Y dia max. 0.166 4.22 0.166 4.22 0.166 4.22 0.166 4.22 0.166 4.22 0.166 4.22 0.153 3.89 0.153 3.89 0.153 3.89 0.473 12.02 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.4 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.1 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.800 20.32 0.875 22.23 0.875 22.23 0.875 22 23 15 Box Mounting Receptacles Hermetic Seal 12H 62GB-12H 4-hole square mounting with exposed solder buckets or flattened and pierced pins. Shell Size 08 10 12 14 16 18 20 22 24 A max B ± 0.005 (± 0.13) C max sq. D 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.890 22.60 0.890 22.60 0 890 22.60 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.093 2.36 0.093 2.36 0.093 2.36 0.812 20.61 0.937 23.79 1.031 26.17 1.125 28.57 1.218 30.93 1.312 33.32 1.437 36.49 1.562 39.67 1.687 42.84 0.594 15.08 0.719 18.29 0.812 20.57 0.906 23.11 0.969 24.64 1.062 26.92 1.156 29.46 1.250 31.75 1.375 35.05 E 0.008 (± 0.203) (±.051) .002 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 0.120 3.05 1.120 3.05 0.147 3.81 F ± 0.005 (± 0.13) R ±0.005 (±0.13) S Y 0.443 11.25 0.443 11.25 0.443 11.25 0.443 11.25 0.443 11.25 0.443 11.25 0.561 14.24 0.561 14.24 0.593 15.06 0.568 14.42 0.695 17.53 0.864 21.84 0.989 25.15 1.113 28.19 1.238 31.49 1.363 34.54 1.488 37.85 1.615 41.15 1.250 31.73 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51.59 2.156 54.76 2.277 57.84 0.473 12.01 14.99 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 30.75 1.375 34.93 1.500 38.10 16 Single Hole Fixing Receptacles Table of Styles Page No. 62GB-57A 20 62GB-57A (219) 20 62GB-14E 21 62GB-14F 21 62GB-57T 22 62GB-17P 22 62GB-17H Hermetic Seal 23 17 Single Hole Fixing Receptacles Table of Styles Page No. 62GB-1 3H Hermetic Seal 23 62GB-5005-10 24 62GB-5036-10 24 62GB-5016-10 25 62GB-5024 25 62GB-5052 62GB-5030 26 26 18 Single Hole Fixing Receptacles Table of Styles Page No. 62GB-5065 27 62GB-5067 27 19 Single Hole Fixing Receptacles 57A 62GB-57A C2099 Single hole mounting with plain shell for direct wiring to exposed solder buckets. Has panel 'O' ring seal. Shell Size A max 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26.62 1.048 26.62 08 10 12 14 16 18 20 22 24 B ± 0.005 (± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 57A(219) C sq, 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 F ± 0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.575 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1 312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1 .812 46.05 M -0.005 (-0.13) 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1 .563 39.70 N R ±.0.005 ± 0.005 (±0.13) (±0.13) 0.540 0.572 13.72 14.53 0.665 0.697 16.89 17.70 0.828 0 885 21.03 22.48 0.952 1.010 24.18 25.65 1.076 1.135 27.33 28.83 1.201 1.260 30.50 32.00 1.326 1.385 33.68 35.18 1.451 1.510 36.86 38.35 1.576 1 635 40.03 41.45 s min Y 1.250 31.75 1.359 34.52 1 531 38.89 1.656 42.06 1.781 45.24 1.891 48 03 2.031 51.59 2.156 54.76 2 277 57.84 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 R ±0.005 (±0.13) 0.572 14.53 0.697 17.70 0.885 22.48 1.010 25.65 1.135 28.83 1.260 32.00 1 .385 51 59 1.510 38.35 1.635 41.45 S min X Thread 9/16 - 24 NEF 11/16 -24 NEF 7/8 -20 UNEF 1 -20 UNEF 1.1/8 - 18 NEF 1.1/4 - 18 NEF 1.3/8 - 18NEF 1.1 /2 - 18 NEF 1.5/8 - 18 NEF 62GB-57A (219) Single hole mounting with plain shell and film wire terminations Shell Size 08 10 12 14 16 18 20 22 24 A m 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 1 .195 30.35 1.195 30.35 1.228 30.35 B ±0.005 (± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 C sq. max. 0.942 23.93 1.067 23.93 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1 817 46.15 1.942 49.33 2.067 52.50 max 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 D min 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 F ±0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 H K L max min min max 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.173 4.40 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.133 3.38 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1 562 38.68 1.687 42.85 1.812 46.05 M -0.005 (-0.13) 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1 .313 33.35 1.438 36.53 1.563 39.70 N ±0.005 (±0.13) 0.540 13.72 0.665 16.89 0.828 21.03 0.952 24.18 1.076 27.33 1.201 30.50 1 .326 35.18 1.451 36.86 1.576 40.03 Y 1.250 0.473 31.75 12.03 1.359 0.590 34.52 14.99 1.531 0.750 38.89 19.05 1.656 0.875 42.06 22.26 1.781 1.000 45.24 25.40 1.891 1.125 48.03 28.58 2.031 1 .250 31.75 2.156 1.375 54.76 34.93 2.277 1.500 57.84 38.10 X Thread 9/16 -24 NEF 11/16 -24 NEF 7/8 -20 UNEF 1 - 20 UNEF 1.1/8 - 18 NEF 1.1 /4 - 18 NEF 1 .3/8 - 18 NEF 1.1/2 -18NEF 1.5/8 - 18 NEF 20 Single Hole Fixing Receptacles 14E 62GB-14E MIL-C-26482 MS3114E Single hole mounting with grommet and grommet nut. Has panel 'O' ring seal Shell Size A max 1.344 34.14 1.344 34.14 1.344 34.14 1 .344 34.14 1.344 34.14 1.344 34.14 1.576 40.03 1.576 40.03 1.609 40.87 08 10 12 14 16 18 20 22 24 B ±0.005 (±0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 14F C max sq. 0.942 23.93 1.067 27.10 1.255 31 .88 1.380 35.05 1.505 38.23 1.630 41.40 1 817 46.15 1.942 49.33 2.067 52.50 F ±0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 G Dia Max 0 713 18.11 0.838 21.29 0.963 24.46 1.088 27.63 1.213 30.81 1.338 33.98 1.463 37.16 1 .588 40.33 1.713 43.51 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 M -0.005 (-0.13) 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1.563 39.70 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 N ±0.005 ( ±0.13) 0.540 13.72 0.665 16.89 0.828 21.03 0.952 24.18 1.076 27.33 1.201 30.50 1.326 33.68 1.451 36.86 1.576 40.03 R ±0.005 (±0.13) 0.572 14.53 0.697 17.70 0.885 22.48 1.010 25.65 1.135 28.83 1.260 32.00 1.385 35.18 1.510 38.35 1.635 41.45 S Y 1.250 31.75 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51.59 2.156 54.76 2.277 57.84 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 X Thread 9/16-24NEF 11/16 -24 NEF 7/8 -20 UNEF 1 - 20 UNEF 1.1/8 -18NEF 1.1/4 –18 NEF 1.3/8 - 18 NEF 1.1 /2 - 18 NEF 1.5/8 - 18 NEF 62GB-1 4F MIL-C-26482 MS3114F Single hole mounting with grommet and grommet nut fitted with integral strain relief clamp. Has panel 'O' ring seal Shell Size 08 10 12 14 16 18 20 22 24 A max 1.762 44.75 1.762 44.75 1.762 44 75 1 .736 44.10 1.876 47.65 1.876 47.65 2.118 53.8 2.118 53.8 2.250 57.15 B ±0.005 (±0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3. 76 0.148 3.76 0.148 3.76 C max sq. 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 F ±0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 G dia. max. 0.828 21.03 0.891 22.63 1.016 25.81 7.147 28.97 1.203 30.56 1.426 36.22 1.426 36.22 7.567 39.80 1.735 44.07 H 0.005 (± 0.13) 0.156 3.96 0.188 4.78 0.312 7.93 0.375 9.53 0.500 12.7 0.625 15.88 0.625 15.88 0.750 19.05 0.800 20.32 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38 68 1.687 42.85 1.812 46.05 M N R -0.005 ±0.005 ±0.005 (-0.13) (±0.13) (±0.13) 0.527 0.540 0.572 13.3 13.72 14.53 0.652 0.665 0.697 16.56 16.89 17.70 0.815 0.828 0.885 20.70 21.03 22.48 0.939 0.952 1.010 23.85 24.18 25.65 1.063 1.076 1.135 27.00 27.33 28.83 1.188 1.201 1.260 30.18 30.50 32.00 1.313 1.326 1.385 33.35 33.68 35.18 1.438 1.451 1.510 36.53 36.86 38.35 1.563 1.576 1.635 39.70 40.03 41.45 S Y 1 250 31.75 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51 .59 2.756 54.76 2.277 57.84 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 7.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 X Thread 9/16 -24 NEF 11/16 - 124 NEF 7/8 - 20 UNEF 1 - 20 NEF 1.1/8 - 18 NEF 1.1/4 - 18 NEF 1.3/8 - 18 NEF 1.1/2 -18 NEE 1.5/8 - 18 NEF 21 Single Hole Fixing Receptacles 57T 62G B-57T Single hole mounting with threaded shell to accept accessories Shell Size 08 10 12 14 16 18 20 22 24 A max 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26.62 1.048 26,62 1.048 26.62 B ± 0.005 (± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.98 0.148 3.76 0.148 3.76 0.148 3.76 c max. sq. 0.942 23.93 1.067 27.10 1.255 31 .88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 17P F ± 0.005 (±0.13) 0.595 15.12 0.595 15.12 0.595 15.12 0.595 15.12 0.595 15.12 0.595 15.12 0.720 18.29 0.720 18.29 0.753 19.13 G dia, max. 0.426 10.82 0.552 14.02 0.677 17.20 0.802 20.37 0.927 23.55 1.052 26.72 1.167 29.65 1.292 32.82 1.416 35.97 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1 58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 M -0.005 (- 0.13) 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1.563 39.70 N 7/16 - UNEF 9/16 – UNEF 11/16 – UNEF 13/16 - UNEF 15/16 – UNEF 1.1/16 – UNEF 1.3/16 – UNEF 1.5/16 – UNEF 1.7/16 - UNEF Y X Thread 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.50 38.10 9/16 - 24 NEF 11/16 – 24 NEF 7/8 – 20 UNEF 1 – 20 UNEF 1.1/18 – 18 NEF 1.1/4 – 18 NEF 1.3/8 - 18 NEF 1.1/2 – 18 NEF 1.5/8 - 18 NEF 62GB-17P MIL-C-26482 MS3114P Single hole mounting for potting. Supplied complete with potting mould locating ring and panel 'O' ring seal Shell Size 08 10 12 14 16 18 20 22 24 A max. 1.391 35.33 1.391 35.33 1.391 35.33 1.391 35.33 1.391 35.33 1.391 35.33 1.641 41.68 1.641 41.68 1.674 42.52 B ±0.005 (±0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 C max. sq. 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 F ± 0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 G 0.572 14.53 0.666 16.92 0.822 20.88 0.907 23.06 1.040 26.42 1.165 29.59 1.285 32.64 1.400 35.56 1 .540 39.12 K L min max. 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.175 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.175 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 M -0.005 (-0.13) 0.527 13.3 0.652 16.56 0.815 20.70 0.939 23.85 1 063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1 .563 39.70 N R ±0.005 ±0.005 (±0.13) (±0.13) 0.540 0.572 1.250 13.72 14.53 31.75 0.665 0.697 1.359 16.89 17.70 34.52 0.828 0.885 1.531 21.03 22.48 38.89 0.952 1.010 1.656 24.18 25.65 42.06 1 .076 1.135 1.781 27.33 28.83 45.24 1.201 1.260 1.891 30.50 32.00 48.03 1.326 1.385 2.031 33.68 35.18 51.59 1.451 1.510 2.156 36.86 38.35 54.76 1.576 1.635 2.277 40.03 41.45 57.84 Y Z 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 0.260 6.60 0.463 11.76 0.557 14.15 0.590 14.99 0.713 18.11 0.835 21.21 1.015 25.78 1.015 25.78 1.265 32.13 X Thread 9/16 -24 NEF 11/16 -24 NEF 7/8 - 20 UNEF 1 - 20 UNEF 1.1/18 – 18 NEF 1.1/4 - 18 NEF 1.3/8 –18 NEF 1.1/2 –18 NEF 1.5/8 - 18 NEF 22 Single Hole Fixing Receptacles Hermetic Seal 17H 62GB-17H MIL-C-26482 MS3114H Single hole mounting with pin contacts in one piece glass-to-metal seal. Exposed solder buckets or flattened and pierced pins. Has panel 'O' ring seal Shell Size 08 10 12 14 16 18 20 22 24 A max. B ±0.005 (±0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.125 3.18 0.125 3.18 0.125 3.18 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.890 22.61 0.890 22.61 13H C max. sq 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 F ±0.005 (±0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 min K max L 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.062 1.57 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.97 1.187 30.15 1.312 33.32 1.437 36.50 1.562 39.67 1.687 42.85 1.812 46.02 M -0.005 (-0.13) 0.527 13.39 0.652 16.56 0.815 20.70 0.939 23.85 1.063 27.00 1.188 30.18 1.313 33.35 1.438 36.53 1.563 39.70 N ±0.005 (±0.13) 0.540 13.72 0.665 16.89 0.828 21.03 0.952 24.18 1.076 27.33 1.201 30.51 1.326 33.68 1.451 36.86 1.576 40.03 R ±0.005 (±0.13) 0.572 14.53 0.697 17.70 0.885 22.48 1.010 25.65 1.135 28.53 1.260 32.00 1.385 35.18 1.510 38.35 1.635 41.53 S Y 1.250 31.75 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51.59 2.156 54.76 2.277 57.84 0.473 12.01 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 30.75 1.375 34.93 1.500 38.10 X Thread 9/16 - 24 NEF 11/16 – 24 NEF 7/8 – 20 UNEF 1 - 20 UNEF 1.1/8 – 18 NEF 1.1/4 – 18 NEF 1.3/8 – 18 NEF 1.1/2 – 18 NEF 1.5/8 – 18 NEF 62GB-1 3H MIL-C-26482 MS3113H Solder mounting with plain shell and exposed solder buckets or flattened and pierced pins Shell Size 08 10 12 14 16 18 20 22 24 A max 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.828 21.03 0.890 22.61 0.890 22.61 0.890 22.61 B ±0.005 (± 0.13) 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 0.036 0.91 c max 0.630 16.00 0.755 19.18 0.849 21.56 0.974 24.74 1.099 27.91 1.223 31.06 1.317 33.45 1.443 36.65 1.567 39.80 F ±0.005 ( ± 0.13) 0.426 10.82 0.426 10.82 0.426 10.82 0.426 10.82 0.426 10.82 0.426 10.82 0.488 12.40 0.488 12.40 0.521 13.23 G max J max 0.562 14.27 0.672 17.07 0.781 19.84 0.906 23.01 1.031 26.19 1.156 29.36 1.250 31.75 1.375 34.93 1.500 38.10 0.592 15.04 0.592 15.04 0.592 15.04 0.592 15.04 0.592 15.04 0.592 15.04 0.658 16.70 0.686 17.42 0.719 18.26 R ±0.005 ( ± 0.13) 0.578 14.68 0.687 17.45 0.797 20.24 0.922 23.42 1.047 26.59 1.172 29.77 1.266 32.16 1.390 35.31 1.516 38.51 S min 1.250 31.75 1.359 34.52 1.531 38.89 1.656 42.06 1.781 45.24 1.891 48.03 2.031 51.59 2.156 54.76 2.277 57.84 Y dia. max 0.473 12.01 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 30.75 1.375 34.93 1.500 38.10 23 Single Hole Fixing Receptacles 62GB-5005-10 5005 (RSRE SD/C 235025/X) Single hole mounting plain shell with PC pin terminated contacts. Reduced diameter flange with panel 'O' seal Size 10 only A max 10 0.877 22.28 B +0.001 -0.002 (+0.03) (-0.03) 0.065 1.65 D dia. max 0.880 22.35 5036 F +0.002 -0.003 (+0.05) (-0.08) 0.681 17.29 K min 0.062 1.58 M -0.005 (-0.13) N ±0.003 (±0.08) R +0.005 (+0.13) S max Y dia. max. X Thread L dia 0.125 3.18 0.655 16.63 0.659 16.47 0.690 17.52 1.017 25.83 0.590 14.99 11/16 – 24 NEF 0.820 20.83 62GB-5036-10 (RSRE SD/C235025/X) Single hole mounting with circular flange and P.C. terminations Size 10 only Shell Size A max 10 0.829 21.06 B +0.001 -0.002 (+0.03) (-0.05) 0.066 1.67 D dia. max 0.880 22.35 F +0.002 -0.003 (+0.05) (-0.08) 0.679 17.25 Y dia. max. 0.590 14.99 K min max 0.062 0.125 1.57 3.18 M -0.005 (-0.13) N ±0.003 (±0.08) R +0.005 (+0.13) S X Thread L dia 0.655 16.63 0.659 16.47 0.690 17.52 1.017 25.83 11/16 – 24 NEF 0.820 20.83 24 Single Hole Fixing Receptacles 5016 62GB-5016-10 (RSRE SD/C 235025/X) Single hole mounting plain shell for direct wiring to exposed solder buckets. Reduced diameter flange with panel 'O' ring seal Solder bucket: Size 10 only Shell Size A max 10 0.902 22.91 B +0.002 -0.001 (+0.05) (-0.03) 0.064 1.62 5024 D dia. max F + 0.003 - 0.002 (+ 0.08) (- 0.05) 0.678 17.21 0.880 22.35 K min 0.062 1.58 max 0.125 3.18 M - 0.010 (- 0.25) N ± 0.005 (± 0.13) R + 0.005 (+ 0.13) S Y dia. max. X Thread 0.655 16.63 0.665 16.89 0.697 17.70 1.359 34.52 0.590 14.99 11/16 – 24 NEF 62GB-5024 (RSRE SD/C 35077/X) Single hole mounting plain shell for direct wiring to exposed solder buckets. Reduced diameter flange with panel 'O' ring seal Solder buckets: Size 8, 12 and 14 only Shell Size 08 12 14 A max 0.978 24.84 0.978 24.84 0.978 24.84 B ± 0.005 ( ± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 D dia. max 0.830 21.08 1.130 28.70 1.260 32.00 F ± 0.005 ( ± 0.13) 0.706 17.93 0.706 17.93 0.706 17.93 K min max 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 M - 0.005 (- 0.13) 0.527 13.3 0.815 20.70 0.939 23.85 N ± 0.005 (± 0.13) 0.540 13.72 0.828 21.03 0.952 24.18 R ±0.005 (± 0.13) 0.572 14.53 0.885 22.48 1.010 25.65 S min 1.250 31.75 1.531 38.89 1.656 42.06 Y dia. max 0.473 12.03 0.750 19.05 0.875 22.23 X Thread 9/16 - 24 NEF 7/8 - 20 UNEF 1 -20 UNEF 25 Single Hole Fixing Receptacles 5052 62GB-5052-10 Single hole fixing with circular flange and back end thread - solder termination Size 10 only Shell Size A max B (± 0.05) (± 0.03) C max. sq. 10 0.947 24.06 0.062 1.58 0.880 22.35 5030 F + 0.003 - 0.002 (+ 0.08) (- 0.05) 0.677 17.19 K min max 0.062 1.58 0.125 3.18 L M - 0.005 (- 0.13) N ± 0.005 (± 0.13) R ± 0.005 (± 0.13) S ± 0.005 (± 0.13) X Thread 0.820 20.83 0.650 16.51 5/8 – 24 UNEF 0.697 17.70 1.359 34.52 11/16 – 24 NEF 62G B-5030 Bulkhead mounting receptacle with solder terminations Shell Size 08 10 12 14 16 18 20 22 24 A max 0.978 24.85 0.978 24.85 0.978 24.85 0.978 24.85 0.978 24.85 0.978 24.85 1.048 26.62 1.048 26.62 1.048 26.62 B ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.102 2.59 0.102 2.59 0.102 2.59 C ± 0.010 (± 0.25) 0.812 20.63 0.937 23.80 1.031 26.19 1.125 28.58 1.218 30.94 1.3121 33.33 1.437 36.50 1.562 39.68 1.687 42.85 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.572 14.53 L 0.563 14.30 0.680 17.28 0.859 21.82 0.984 25.00 1.108 28.15 1.233 31.32 1.358 34.50 1.483 37.67 1.610 40.90 N Thread 7/16 - 28 UNEF 9/16 - 24 NEF 11 /16 - 24 NEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1.1/16 - 18NEF 1.3/16 -18NEF 1.5/16 - 18 NEF 1.7/16 - 18 NEF 26 Single Mole Fixing Receptacles 5065 62G B-5065 Single hole mounting with plain shell and film wire terminations Shell Size 08 10 12 14 16 18 20 22 24 A max 1.021 25.94 1.021 25.94 1.021 25.94 1.021 25.94 1.021 25.94 1.021 25.94 1.240 31.50 1.240 31 .50 1.273 32.34 B ± 0.005 (± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 C sq. max D 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.05 1.505 38.23 1.630 41.40 1.817 46.15 1942 49.33 2.067 52.50 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 min 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 F ± 0.005 (± 0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 H max min 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.218 5.54 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 0.178 4.52 J ± 0.020 (± 0.51) 0.060 1.52 0.060 1.52 0.060 1.52 0.060 1.52 0.060 1 .52 0.060 1.52 0.060 1.52 0.060 1 .52 0.060 1.52 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0.250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.32 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.05 M N R S -0.005 ±0.005 ±0.005 (-0.13) (±0.13) (±0.13) 0.527 0.540 0.572 1 250 13.3 13.72 14.53 31.75 0.652 0.665 0.697 1.359 16.56 16.89 17.70 34.52 0.815 0.828 0.885 1.531 20.70 21.03 22.48 38.89 0.939 0.952 1.010 1.656 23.85 24.18 25.65 42.06 1.063 1.076 1.135 1.781 27.00 27.33 28.83 45 24 1.188 1.201 1.260 1.891 30.18 30.50 32.00 48.03 1.313 1.326 1.385 2.031 33.35 33.68 35.18 51.59 1.438 1.451 1.510 2.156 36.53 36.855 38.35 54.76 1.563 1.576 1.635 2.277 39.70 40.03 41.45 57.84 Y 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1 .250 31.75 1.375 34.93 1 .500 38.10 X Thread 9/16 - 24 NEF 11/16 - 24 NEF 7/8 - 20 UNEF 1 - 20 UNEF 1.1/8 - 18 NEF 1.1 /4 - 18 NEF 1.3/8 - 18 NEF 1.1/2 - 18 NEF 1.5/8 - 18 NEF 62GB-5067 5067 Single hole mounting with plain shell and film wire terminations Shell Size 08 10 12 14 16 18 20 22 24 A max 1.095 27.81 1.095 27.81 1.095 27.81 1.095 27.81 1.095 27.81 1.095 27.81 1.309 33.24 1.309 33.24 1.342 34.08 B ± 0.005 (± 0.13) 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.117 2.97 0.148 3.76 0.148 3.76 0.148 3.76 C max sq 0.942 23.93 1.067 27.10 1.255 31.88 1.380 35.10 1.505 38.23 1.630 41.40 1.817 46.15 1.942 49.33 2.067 52.50 D max min 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.030 0.76 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 0.028 0.71 F ± 0.005 (± 0.13) 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.706 17.93 0.894 22.71 0.894 22.71 0.927 23.55 H max 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 0.262 6.66 min 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 0.230 5.85 J ± 0.012 (± 0.30) 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 0.049 1.24 K L min max 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.062 1.58 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.250 6.35 0250 6.35 0.250 6.35 0.750 19.05 0.875 22.23 1.062 26.98 1.187 30.15 1.312 33.23 1.437 36.50 1.562 38.68 1.687 42.85 1.812 46.03 M N R S Y -0.005 ±0.005 ±0.005 (-0.13) (±0.13) (±0.13) 0.527 0.540 0.572 1.250 0.473 13.3 13.72 14.53 31.75 12.03 0.652 0.665 0.697 1.359 0.590 16.56 16.89 17.70 34.52 14.99 0.815 0.828 0.885 1.531 0.750 20.70 21.03 22.50 38.89 19.05 0.939 0.952 1.010 1.656 0.875 23.85 24.18 25.65 42.06 22.23 1.063 1.076 1.135 1.781 1.000 27.00 27.33 28.83 45.24 25.40 1.188 1.201 1.260 1.891 1.125 30.18 30.51 32.00 48.03 28.58 1.313 1.326 1.385 2.031 1 .250 33.35 33.68 35.18 51.59 31.75 1.438 1.451 1.510 2.156 1.375 36.53 36.86 38.35 54.76 34.93 1.563 1.576 1.635 2.277 1.500 39.07 40.03 41.59 57.84 38.10 X Thread 9/16 - 24 NEF 11/16 - 24 NEF 7/8 - 20 UNEF 1 - 20 UNEF 1.1/8 -18 NEF 1.1 /4 - 18 NEF 1.3/8 -18 NEF 1.1/2 -18 NEF 1.5/8 -18 NEF 27 Cable Mounting Receptacles Table of Styles Page No. 62GB-51T 29 62GB-11A 29 62GB-11E 30 62GB-11F 30 62GB-11J 31 62GB-11P 31 28 Cable Mounting Receptacles 51T 62GB-51T Basic cable mounting receptacle with threaded shell to accept standard cable accessories. Shell Size A max 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 0.978 24.84 1.048 26 62 1.048 26.62 1.048 26.62 08 10 12 14 16 18 20 22 24 11A B ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0 094 2.39 0.094 2.39 0.102 2.59 0.102 2.59 0.102 2.59 C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.560 / 0.574 14.23 / 14.58 Y dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 X Thread 7/16 - 28 UNEF 9/16 - 24 NEF 11 /16 - 24 NEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1.1/16 -18 NEF 1 .3/16 -18 NEF 1.5/16 -18 NEF 1.7/16 -18 NEF 62GB-11A Cable mounting receptacle with general duty back shell. No grommet supplied. Shell Size 08 10 12 14 16 18 20 22 24 A max 1.624 41.25 1 .624 41.25 1.624 41.25 1.624 41.25 1.624 41.25 1.624 41.25 1.687 42.85 1.687 42.85 1.730 43.94 B ± 0 005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0 104 / 0.100 2.64 / 2.55 0.104 / 0.100 2.64 / 2.55 0.104 / 0.100 2.64 / 2.55 C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10 54 0.415 10.54 0.535 13.59 0.535 13.59 0.569 / 0.574 14.45 / 14.58 G dia max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33.30 1.436 36.75 1.561 39.65 Y Dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 M Thread 1/2 - 28 UNEF 5/8 - 24 NEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 – 20 UNEF 1.3/16 – 18 NEF 1 3/16 -18 NEF 1.7/16 -18 NEF 1.7/16 -18 NEF 29 Cable Mounting Receptacles 11E 62GB-11E MIL-C-26482 MS3111E Cable mounting receptacle with grommet and grommet nut Shell Size A max B ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.102 2.59 0.102 2.59 0.102 2.59 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.383 35.13 1.383 35.13 1.383 35.13 08 10 12 14 16 18 20 22 24 C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.569 / 0.574 14.45 / 14.58 G dia max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 3013 1.311 33.30 1.436 36.75 1.561 39.65 Y dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 62GB-11F 11F MIL-C-26482 MS3111F Cable mounting receptacle with grommet and grommet nut fitted with integral strain relief clamp Shell Size A max 08 1.762 44.75 1.762 44.75 1.762 44.75 1.736 44.10 1.876 47.65 1.876 47.65 2.118 53.80 2.118 53.80 2.250 57.15 10 12 14 16 18 20 22 24 B ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.104 / 0.100 2.64 / 2.55 0.104 / 0.100 2.64 / 2.55 0.104 / 0.100 2.64 / 2.55 C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 013) 0.415 10.54 0 415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.569 / 0.574 14.45 / 14.58 G dia max 0.828 21.03 0.891 22.63 1.016 25.81 1.141 28.97 1.203 30.56 1.426 36.22 1 .426 36.22 1.567 39.80 1.735 44.07 H ± 0.005 (± 0.13) 0.156 3.96 0.188 4.78 0.312 7.93 0.375 9.53 0.500 12.7 0.625 15.88 0.625 15.88 0.750 19.05 0.800 20.32 Y dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 30 Cable Mounting Receptacles 11J 62GB-11J With cable clamp for unscreened jacketed cable. No grommet supplied Shell Size 08 10 12 14 16 18 20 22 24 A max B ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.102 2.59 0.102 2.59 0.102 2.59 1.846 46.89 1.846 46.89 1.947 49.45 2.147 54.54 2.347 59.61 2.547 64.70 2.831 71.91 3.031 76.99 3.074 78.03 11P C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.569 / 0.574 14.45 / 14.58 G dia max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33.30 1.436 36.75 1.561 39.65 Y dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 min closed 0.168 4.28 0.205 5.21 0.338 8.59 0.416 10.57 0.550 13.97 0.600 15.24 0.635 16.13 0.670 17.02 0.740 18.80 Z max free 0.230 5.84 0.312 7.93 0.442 11.23 0.539 13.69 0.616 15.65 0.672 17.07 0.747 18.98 0.846 21.49 0.894 22.71 62GB-11P MIL-C-26482 MS3111P For potted seal supplied complete with detachable potting mould and location ring Shell Size 08 10 12 14 16 18 20 22 24 A max 1.316 33.43 1.425 36.20 1.394 35.41 1.394 35.41 1.394 35.41 1.394 35.41 1.612 40.95 1.612 40.95 1.674 42.52 8 ± 0.005 (± 0.13) 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.094 2.39 0.102 2.59 0.102 2.59 0.102 2.59 C max sq 0.817 20.75 0.942 23.93 1.036 26.32 1.130 28.70 1.223 31.07 1.317 33.45 1.442 36.63 1.567 39.80 1.692 42.98 F ± 0.005 (± 0.13) 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.415 10.54 0.535 13.59 0.535 13.59 0.569 / 0.574 14.45 / 14.58 G dia max 0.572 14.53 0.666 16.92 0.822 20.88 0.907 23.04 1.040 26.42 1.165 29.59 1.285 32.64 1.400 35.56 1.540 39.12 Y dia max 0.473 12.03 0.590 14.99 0.750 19.05 0.875 22.23 1.000 25.40 1.125 28.58 1.250 31.75 1.375 34.93 1.500 38.10 Z min 0.260 6.60 0.463 11.76 0.557 14.15 0.590 14.99 0.713 18.11 0.835 22.21 1.015 25.78 1.015 25.78 1.265 32.13 31 Plugs Table of Styles Page No. 62GB-56T 34 62GB-56TG 34 62GB-16A 35 62GB-56T (046) 35 62GB-16E 36 62GB-16F 36 62GB-16P 37 32 Plugs Table of Styles Page No. 62GB-16J 37 62GB-5039-10 38 62GB-5055-10 38 62GB-5056-10 38 62GB-5074 39 33 Plugs 56T 62GB-56T Basic plug with threaded shell to accept standard cable accessories Shell Size 08 10 12 14 16 18 20 22 24 A Max 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 &976 24.79 0.976 24.79 0.976 24.79 C max 0.750 19.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 X Thread 7/16 - 28 UNEF 9/16 - 24 NEF 11/16 -24NEF 13/16 - 20 UNEF 15/16 - 20 UNEF 1.1 /16 - 18 NEF 1.3/16 - 18 NEF 1.5/16 - 18 NEF 1.7/16 - 18 NEF 62GB-56TG 56TG Basic plug with threaded shell to accept standard cable accessories. Has shell grounding spring fingers Shell Size 08 10 12 14 16 18 20 22 24 A max 0.976 24.79 0.976 24.79 0.976 24,79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 0.976 24.79 C max 0.750 19.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 X Thread 7/16 - 28 UNEF 9/16 - 24 NEF 11/16 – 24 NEF 13/16 – 20 UNEF 15/16 - 20 UNEF 1.1 /16 - 18 NEF 1.3/16 - 18 NEF 1.5/16 - 18 NEF 11/16 - 18 NEF 34 Plugs 16A 62GB-1 6A Plug with general duty back shell. No grommet provided. Shell Size 08 10 12 14 16 18 20 22 24 56T A max 1.614 41.00 1.614 41.00 1.614 41.00 1.614 41.00 1.614 41.00 1.614 41.00 1.614 41.00 1.614 41.00 1.658 42.11 G max 0.561 14.25 0,686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33.30 1.436 36.75 1.561 39.65 C max 0.750 19.05 O.859 21.82 1.031 26.19 1,156 29.36 1.281 32.54 1.391 35.33 1.531 38-89 1.656 42.06 1.777 45.14 M Thread 1/2 - 28 UNEF 5/8 - 24 NEF 3/4 - 20 UNEF 7/8 - 20 UNEF 1 - 20 UNEF 1.3/16 -18 NEF 1.3/16 - 18 NEF 1.7/16 - 18 NEF 1.7116 - 18 NEF 62GB-56T(046) Box-mounting plug. Available for shell size 16: other sizes to special order. Cable accessories cannot be fitted. Shell Size 16 20 22 A max 1.042 26.47 1.042 26.47 1.042 26.47 J max 1.317 33.45 1.625 41.28 1.625 41.28 K 1,000 25.40 1.250 31.75 1.250 31.75 L 6.32 NC 6.32 NC 6.32 NC 35 Plugs 16E 62GB-16E MIL - C26482 MS3116E Plug with grommet and grommet nut Shell Size 08 10 12 14 16 18 20 22 24 16F A max 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 1.281 32.54 C max 0.750 1.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 G max 0.561 14.25 0.686 17.431 0.811 20.60 0.936 I 23.78 1.061 26.95 1.186 30.13 1 .311 33.30 1.436 36.75 1.561 39.65 62GB-16F MIL - C26482 MS3116F Plug with grommet and grommet nut fitted with integral strain relief clamp. Shell Size 08 10 12 14 16 18 20 22 24 A max 1.752 44.50 1.752 44.50 1.752 44.50 1.726 43.84 1.866 47.40 1.866 47.40 2.040 51 .81 2.040 51.81 2.178 55.32 C dia max 0.750 19.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 G dia max 0.828 21.03 0.891 22.63 1.016 25.81 1.141 28.97 1.203 30.56 1.426 36.22 1.426 36.22 1.567 39.80 1.735 44.07 H ± 0.005 (± 0.13) 0.156 3.96 0.188 4.78 0.312 7.93 0.375 9.53 0.500 12.70 0.625 15.88 0.625 15.88 0.750 19.05 0.800 20.32 36 Plugs 16P 62GB-16P MIL-C26482 MS3116P For potted seal. Supplied complete with detachable potting mould and location ring. Shell Size A max 1.306 33.17 1.415 35.94 1.384 35.15 1.384 35.15 1.384 35.15 1.384 35.15 1.539 39.09 1.539 39.09 1.602 40.69 08 10 12 14 16 18 20 22 24 16J C max 0.750 19.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 G max 0.572 14.53 0.666 16.92 0.822 20.88 0.907 23.04 1.040 26.41 1.165 29.59 1.285 32.64 1.400 35.56 1.540 39.12 Z min 0.260 6.60 0.463 11.76 0.557 14.14 0.590 14.99 0.713 18.11 0.835 22.21 1.015 25.78 1.015 25.78 1265 32.13 62GB - 16J Plug with cable clamp for unscreened jacketed cable. No grommet supplied. Shell Size 08 10 12 14 16 18 20 22 24 A max 1.836 46.64 1.836 46.64 1.937 49.20 2.137 54.28 2.337 59.36 2.537 64.45 2.758 70.05 2.958 75.13 3.002 76.25 C max 0.750 19.05 0.859 21.82 1.031 26.19 1.156 29.36 1.281 32.54 1.391 35.33 1.531 38.89 1.656 42.06 1.777 45.14 G max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33.30 1.436 36.75 1.561 39.65 Z min 0.168 4.28 0.205 5.21 0.388 8.59 0.416 10.57 0.550 13.97 0.600 15.24 0.635 16.13 0.670 17.02 0.740 18.80 max 0.230 5.84 0.312 7.93 0.442 11.23 0.539 13.69 0.616 15.65 0.672 17.07 0.747 18.98 0.846 21.49 0.894 22.71 37 Plugs 5039 62GB-5039-10 SD/C 235 155 - X SD/C 235 156 - X Low profile, solder termination plug with 90° screened cable outlet. Shell Size 10 5055 A max 1.473 37.41 B max 0.500 12.70 C max 0.980 24.89 D max 1.500 38.10 C max 0.980 24.89 D max 1.800 45.72 62GB-5055-10 SD/2 235 193 - X Low profile solder termination plug with size 12 90°screened cable outlet. Shell Size 10 5056 A max 1.800 45.72 B max 0.655 16.64 62GB-5056-10 Audio plug with solder termination Shell Size 10 A max 2.375 60.33 B max 0.979 / 0.969 24.87 / 24.61 C max 0.310 7.87 38 Plugs 5074 62GB-5074 Flange mounting push/pull plug with threaded shell to accept standard cable accessories. Shell Size 10 12 14 A max 0.912 23.17 0.912 23.17 0.912 23.17 B max 1.125 28.57 1.218 30.93 1.312 33.32 C L 0.866 22.00 0.969 24.61 1.062 26.97 9/16 - 24 NEF 9/16 - 24 NEF 9/16 - 24 NEF 39 Accessories Table of Styles Page No. 62GB-736 42 62GB-737 42 62GB-738 43 62GB-742 43 62GB-810 44 62GB-812 44 62GB-813 45 40 Accessories Table of Styles Page No. 62GB-814 45 62GB-997 46 62GB-998 46 62GB-1069 47 62GB-1070 47 62GB-760 48 41 Accessories 736 62GB-736 Caps and chains for single hole mounting receptacles Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 737 B ± 0.005 (± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C dia max 0.734 18.64 0.859 21.82 1.000 25.4 1.125 28.57 1.250 31.75 1.375 34.92 1.500 38, 1 1.625 41.27 1.750 44.45 J ± 0.005 (± 0,127) 0.578 14.68 0.703 17.86 0.891 22.63 1.016 25.81 1.141 29.39 1.266 32.16 1.391 35.33 1.516 38.51 1 .641 41.68 62GB-737 Caps and chains for cable mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ± 0.005 ( ± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C dia max 0.734 18.64 0.859 21.82 1.000 25.4 1.125 28.57 1.250 31.75 1.375 34.92 1.500 38.1 1.625 41.27 1.750 44.45 J ± 0.005 (± 0.127) 0.458 11.63 0.583 14.81 0.708 17.98 0.896 22.76 1.021 25.93 1.146 29.11 1.271 32.28 1.396 35.46 1.521 38.63 42 Accessories 738 62GB-738 Caps and chains for flange mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 742 B ± 0.005 (± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C dia max 0.734 18.64 0.859 21.82 1.000 25.4 1.125 28.57 1.250 31. 75 1.375 34.92 1.500 38.1 1.625 41.27 1.750 44.45 B ± 0.005 ( ± 0.13) 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.584 14.83 0.584 14.83 0.617 15.67 C dia max 0.719 18.26 0.844 21.43 1.000 25.4 1.125 28.57 1.250 31.75 1.357 34.92 1.500 38.1 1.625 41.27 1.750 44.45 J ± 0.005 (± 0.127) 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.152 3.86 62GB-742 Caps and chains for plugs. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 ( ± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 J ± 0.005 ( ± 0.127) 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.152 3.86 43 Accessories 810 62GB-810 Caps and cords for plugs Shell Size 08 10 12 14 16 18 20 22 24 812 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ± 0.005 (± 0.13) 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.522 13.25 0.584 14.83 0.584 14.83 0.617 15.67 C dia max 0.719 18.26 0.844 21.43 1.000 25.4 1.125 28.57 1.250 31.75 1.375 34.93 1.500 38.1 1.625 41.27 1.750 44.45 J ± 0.003 (± 0.08) 0.145 3.68 3.685 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.171 4.34 C dia max 0.734 18.64 0.859 21.82 1 .000 25.4 1.125 28.57 1 .250 31.75 1.375 34.92 1.500 38.1 1.625 41.27 1.750 44.45 J ± 0.003 (± 0.08) 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.145 3.68 0.171 4.34 62GB-812 Caps and cords for flange mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4,0 101.6 4.0 101 .6 B ± 0.005 (± 0.13) 0.521 13.23 0.521 13.23 0 521 13.23 0.521 13.23 0.521 13.23 0.521 13.23. 0.521 13.23 0.521 13.23 0.556 14.12 44 Accessories 813 62GB-813 Caps and cords for single hole mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 814 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.0 4.0 101.6 4.0 101.6 B ± 0.005 (± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C max 0.734 18.64 0.859 21.82 1.000 25.4 1.125 28.57 1.250 31.75 1.375 34.92 1.500 38.1 1.625 41.27 1.750 44.45 J + 0.010 (+ 0.25) 0.578 14.68 0.703 17.86 0.891 22.63 1.016 25.81 1.141 29.39 1.266 32.16 1.391 35.33 1.516 38.56 1.641 41.68 62GB-814 Caps and cords for cable mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 ( ± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ± 0.005 ( ± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C max 0.734 18.64 0.859 21.82 1.000 25.4 1.125 28.57 1.250 31.75 1.375 34.92 1.500 38.1 1.625 41.27 1.750 44.45 J +0.010 ( + 0.25) 0.453 11.50 0.578 14.64 0.703 17.85 0.891 22.63 1.016 25.80 1.141 28.98 1.266 32.15 1.391 35.33 1.516 38.50 45 Accessories 997 62GB-997 Caps and chains ribbed for single hole mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 998 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ± 0.005 ( ± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C dia max 0.892 22.66 1.017 26.84 1.142 29.01 1.267 32.19 1.454 36.94 1.563 39.70 1.687 42.85 1.797 45.65 1.922 48.82 J + 0.010 ( + 0.25) 0.578 14.69 0.703 17.86 0.891 22.64 1.016 25.81 1.141 28.99 1.266 32.16 1.391 35.34 1.516 38.51 1.641 41.69 C dia max 0.892 22.66 1.017 25.84 1.142 29.01 1.267 32.19 1.454 36.94 1.563 39.70 1.687 42.85 1.797 45.65 1.922 48.82 J ± 0.005 ( ± 0.13) 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.125 3.18 0.147 3.74 62GB-998 Caps and chains ribbed for plugs. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101 .6 4.0 101.6 4.0 101.6 g max 0.562 1428 0.562 14.28 0.562 1428 0.562 14.28 0.562 14.28 0.562 14.28 0.624 15.85 0.624 15.85 0.624 15.85 46 Accessories 62GB-1069 1069 Caps and cords ribbed for single hole mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 8.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ±.0.005 ( ± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 C dia max 0.892 22.66 1.017 26.84 1.142 29.01 1.267 32.19 1.454 36.94 1.563 39.70 1.687 42.85 1.797 45.65 1.922 48.82 J + 0.010 ( + 0.25) 0.578 14.69 0.703 17.86 0.891 22.64 1.016 25.81 1.141 28.99 1.266 32.16 1.391 35.34 1.516 38.51 1.641 41.686 C Dia max 0.892 22.66 1.017 22.66 1.142 29.01 1.267 32.19 1.454 36.94 1.563 39.70 1.687 42.85 1.797 45.65 1.922 48.82 J ± 0.005 (± 0.13) 0.117 3.03 0.119 3.03 0.119 3.03 0.119 3.03 0.119 3 03 0.119 3.03 0.119 3.03 0.119 3.03 0.147 3.74 62GB-1070 1070 Caps and cords ribbed for flange mounting receptacles. Shell Size 08 10 12 14 16 18 20 22 24 A ± 0.25 (± 6.35) 3.0 76.2 3.0 76.2 3.5 88.9 3.5 88.9 3.5 88.9 3.5 88.9 4.0 101.6 4.0 101.6 4.0 101.6 B ± 0.005 ( ± 0.13) 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.521 13.23 0.556 14.12 47 Accessories 62GB-760 760 Flange mounting gasket for box mounting and hermetic receptacles. Shell Size 08 10 12 14 16 18 20 22 24 0 ± 0.010 (± 0.254) 0.812 20.62 0.938 23.82 1.031 26.18 1.125 28.57 1.219 30.96 1.312 33.32 1.438 36.52 1.563 39.70 1.688 42.87 E ± 0.010 (± 0.254) 0.594 15.08 0.719 18.26 0.813 20.65 0.906 23.01 0.969 24.61 1.063 27.00 1.156 29.36 1.250 31.75 1.375 34.92 F ± 0.008 (± 0.20) 0.508 12.90 0.633 16.07 0.758 19.25 0.883 22.42 1.008 25.60 1.133 28.77 1.258 31.95 1.383 35.13 1.508 38.30 G + 0.010 (+ 0.254) 0.130 3.30 0.130 3.30 0.130 3.30 0.130 3.30 0.130 3.30 0.130 3.30 0.130 3.30 0.130 3.30 0.156 3.96 H 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 0.042 / 0.016 1.06 / 0.40 48 Cable Accessories Table of Styles Page No. 62GB-584 51 62GB-585 51 62GB-586 52 62GB-587 52 62GB-711 53 62GB-720 53 62GB-776 54 49 Cable Accessories Table of Styles Page No. 62GB-1225 54 62GB-5028 55 50 Cable Accessories 584 62GB - 584 - XX - XXS or P Grommet seal and nut. Provides an environmental seal for the exposed solder buckets in the open back class T shells. Shell Size A G max 0.561 14.25 0.686 17.43 0.811 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33.30 1.436 36.75 1.561 39.65 0.545 13.84 0.545 13.84 0.545 13.84 0.545 13.84 0.545 13.84 0.545 13.84 0.545 13.84 0.545 13.84 0.501 12.73 08 10 12 14 16 18 20 22 24 585 Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. 62G B - 585 - XX - XXS or P A2103 Grommet and nut with strain relief clamp. The clamp prevents the flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks. Shell Sine 08 10 12 14 16 18 20 22 24 A max 0.991 25.17 0.991 25.17 0 991 25.17 0.965 24.51 1.105 28.07 1.105 28.07 1.285 32.64 1.285 32.64 1.373 34.88 Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. G max 0 828 21.03 0.891 22.63 1.016 25.81 1.141 28.98 1.203 30.56 1.426 36.22 1.426 36.22 1.567 39.80 1.735 44.07 max 0.161 4.09 0.193 4.90 0.317 8.05 0.380 9.65 0.505 12.83 0.630 16.00 0.630 16.00 0.755 19.18 0.805 20.45 51 Cable Accessories 586 62G B - 586 - XX Potting mould and ring, supplied together as a set. Suffix XX specifies shell size. Shell Size 08 10 12 14 16 18 20 22 24 587 A max 0.644 16.36 0.753 19.13 0.722 18.34 0.722 18.34 0.722 18.34 0.722 18.34 0 877 22 30 0.877 22.30 0.896 22.76 G max 0.585 14.85 0.679 17.24 0.835 21.20 0.913 23.19 1.038 26.36 1.163 29.54 1.288 32.71 1.413 35.89 1.538 39.06 Z min 0.260 6.60 0.463 11.76 0.557 14.14 0.590 14.98 0.713 18.11 0.835 21.20 1.015 25.78 1.015 25.78 1.263 32.08 62G B - 587 - XX - XXS or P Clamp for screened jacketed cable. 62 Series only with grommet. Effective sealing is provided over the range of cables covered by DEF 10(Pattern C) and DEF STAN 61-12 port (see table). These are supplied to separate order only for use with style T shells. Shell Size 08 10 12 14 16 18 20 22 24 length Including plug 2.732 69.39 2.742 69.64 3.152 80.06 3.152 80.06 3.272 83.10 3.272 83.10 3.696 93.87 A Max length Including receptacle 2.742 69.64 2.752 69.90 3162 80.31 3.162 80.31 3 282 83.36 3.345 84.96 3.768 95.70 Suffix XX-XXS or P enables grommet to be matched to the insert arrangement. B max G max 0.676 17.17 0.676 17.17 0.812 20.62 0.926 23.52 1.051 26.67 1.280 32.51 1.620 41.15 0.775 19.68 0.902 22.91 1.030 2616 1.157 29.39 1.284 32.61 1.539 39.09 1.783 45.29 52 Cable Accessories 711 62G B - 711 - XX - XXS or P Grommet and nut with right angled strain relief clamp. The clamp prevents flexing of the wires in the immediate vicinity of the risers, so avoiding the risk of leaks (these are supplied to separate order only for use with style T shells). Shell Size 08 10 12 14 16 18 20 22 24 A max G max 1.5/32 0.828 21.03 0.891 22.63 1.016 25.81 1.141 28.98 1.203 30.56 1.426 36.22 1.426 36.22 1.567 39.80 1.735 44.07 1.3/16 1.7/32 1.1/4 1.5/16 1.3/8 1.3/8 1.29/64 1.15/32 Suffix XX - XXS or P enables grommet to be matched to the insert arrangement. H ± 0.005 ± 0.13 0.161 4.09 0.193 4.90 0.317 8.05 0.380 9.65 0.505 12.83 0.630 16.00 0 630 16.00 0.755 19.18 0.805 20.45 Q max 0.733 18.62 0.795 20.19 0.858 21.79 0.915 23.24 1.010 25.65 1.070 27.18 1.140 28.96 1.170 29.72 1.260 32.00 62G B - 720 - XX 720 Clamp for unscreened jacketed cable. No grommet is supplied, for use with 50T, 51T and 56T styles. Shell Size 08 10 12 14 16 18 20 22 24 A max 1.085 27.56 1.060 26.92 1.160 29.46 1.360 34.54 1.585 40.26 1.785 45.34 1.981 50.32 2.181 55.39 2.216 56.28 G max 0.561 14.25 0.686 17.43 0.81 1 20.60 0.936 23.78 1.061 26.95 1.186 30.13 1.311 33 30 1.436 36.75 1.561 39.65 Suffix XX specifies shell size. Z closed 0 168 4.28 0.205 5.21 0 338 8.59 0.416 10.57 0.550 13.97 0.600 15.24 0.635 16.13 0.670 17.02 0.740 18.80 Z free 0 230 5.84 0.312 7.93 0.442 1 1.23 0.539 1 13.69 0.616 15.65 0.672 17.57 0.747 18.98 0.846 21.49 0.894 22.71 53 Cable Accessories 776 62GB - 776 General duty shell to accept conduit, AN 3057 or MS 3057 A cable clamps and heat shrink sleeves. Shell Size 08 10 12 14 16 18 20 22 24 1225 A max 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 0.937 23.80 M Thread 1/2 - 28 UNEF 5/8 - 24 NEF 3/4 - 20 UNEF 7/8 – 20 UNEF 1 - 20 UNEF 1.3/16 - 18 NEF 1.3/16 - 18 NEF 1.7/16 - 18 NEF 1.7/16 - 18 NEF 62GB - 1225 900 clamp for screened jacketed cable. These are supplied to separate order only for use with style T shells. Shell Size 08 10 12 14 A max 0.942 23.93 0.883 22.43 0.704 17,88 1.119 28.42 B max 0.821 20.85 0.821 20.85 0.821 20.85 0.937 23.80 C max 1.160 29.46 1.160 29.46 1.160 29.46 1.160 29.46 D max 0.636 16.15 0.636 16.15 0.636 16.15 0.636 16.15 54 Cable Accessories 5028 62G B - 5028 - XX - XXS or P 75% Clamp for screened jacketed cable with grommet. Effective sealing is provided over the range of cables covered by DEF 10 (Pattern C) and DEF STAN 61 - 12 part 5 (see table). These are supplied to separate order only and are intended for use with style T shells. Shell Size 08 10 12 14 16 18 20 22 24 length including receptacle 2.416 61.37 2.573 65.35 2.666 67.72 2.760 70.10 2.790 70.87 3.312 84.13 3.500 88.90 A Max length including plug 2.375 60.24 2.532 64.39 2.625 66.68 2.719 69.04 2.750 69.80 3.250 82.55 3.375 85.73 Suffix XX-XXS or P enables grommet to be matched to the insert arrangement. B max G max max 0.676 17.17 0.676 17.17 0.812 20.62 0.926 23.52 1.051 26.70 1.280 32.51 1.620 41.15 0.775 19.68 0.902 22.91 1.030 26.16 1.157 29.39 1.284 32.61 1 539 39 09 1.783 45.29 1.750 44.45 1.875 47.63 2.125 53.98 2.125 53.98 2.062 52.38 2.062 52.38 2.187 55.55 55 Insert Orientations Alternative position of insert with socket contacts (∅ counter clockwise) Normal position with pin contacts Alternate position of insert with pin contacts (∅ clockwise) Each diagram shows mating face of insert. Orientation ∅ (degrees) Insert Arrangement Normal W X Y Z 8-2 0 58 122 - - 8-3 0 60 210 - - 8-33 0 90 - - - 8-4 0 45 - - - 8-98 0 - - - - 10-2 0 - - - - 10-6 0 90 - - - 10-7 0 - - - - 12-3 0 - - 180 - 12-10 0 60 155 270 295 273 14-5 0 40 92 184 14-12 0 43 90 - - 14-15 0 17 110 155 234 14-19 0 30 165 315 - 16-18 0 54 152 180 331 16-23 0 158 270 - - 16-26 0 60 - 275 338 18-11 0 62 119 241 340 18-32 0 85 138 222 265 20-16 0 238 318 333 347 20-41 0 45 126 225 - 22-21 0 16 135 175 349 22-55 0 30 142 226 314 24-61 0 90 180 270 324 56 Key/Keyway Orientations Datum is always taken from major key or keyway. In receptacles the major keyway always remains fixed in relation to the mounting flange. For the A',B,C,D',E and F orientations, the three bayonet locations and associated minor keyways are rotated complete, in accordance with the table below. N.B.- The accompanying diagram shows a receptacle shell, with keyways. Corresponding key orientations for a mating plug shell are therefore always clockwise. N A Values for ∝ (degrees) B C D 8 105 92 - - 10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75 14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 75 Shell Size 118 E F N A Values for θ (degrees) B C D 118 82 35 35 - - 35 Values for β (degrees) B C D E F N A E F 30 50 75 75' - - 75 100 75 75 16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 22 105 101 97 113 109 7S 120 35 35 35 35 35 30 50 75 75 75 100 75 75 75 24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 N Values for ϕ (degrees) Orientation A B C D 50 50 Shell Size 8 Values for ω (degrees) Orientation B C D E E F N A 50 50 50 30 45 60 47 - - 73 73 F 47 10 50 50 50 50 50 30 45 60 50 40 80 70 70 50 12 50 50 50 50 50 30 45 60 52 44 76 68 70 50 14 50 50 50 50 50 30 35 60 53 46 74 67 30 75 16 50 50 50 50 50 30 35 60 54 48 72 66 30 75 18 50 50 50 50 50 30 35 60 55 50 70 65 30 75 20 50 50 50 50 50 30 35 60 55 50 70 65 30 75 22 50 50 50 50 50 30 35 60 56 52 68 64 30 75 24 50 50 50 50 50 30 35 60 56 52 68 64 30 75 57 Assembly Instructions for Amphenol straight S.J. clamps 62GB-587 for internally and externally screened and unscreened cables to DEF 10 and DEF STAN 61-12 Part 5. Internally Screened Jacketed Cable ‘Type C’ Cable and Wire Stripping Strip the outer P.V.C. Jacket of the cable back to dim `A' to expose the internal braid. Trim the braid back to within 19.05mm (0.75 in) of P.V.C. jacket and fold back `B'. A Dimension Size 08 10 12 8 14 16 & 20 24 mm 34.93 36.51 41.27 44.45 49.21 in 1.375 1.437 1.625 1.75 1.937 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp and (5) Clamp Body (6) Grommet. Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into rear of connector shell and against rear face of insert. 58 Assembly Instructions Externally Screened Jacketed Cable Types ‘B’ & `Q’ Cable and Wire Stripping Strip the outer braid and internal P.V.C. jacket of the cable back to dim ‘A’ A Dimension Size 08 10 12 & 14 16 & 20 24 mm 33.32 34.93 39.7 42.85 47.63 in 1.312 1.375 1.563 1.687 1.875 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Male Braid Clamp Convolute Screen (See B) as far as possible, and slide on items (4) Female Braid Clamp (5) Gasket and (6) Clamp Body (7) Grommet Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. Unscreened Jacketed Cables Type `A' All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded. 59 Assembly Instructions for Amphenol angled S.J. clamps 62GB-5028 for internally and externally screened and unscreened cables to DEF 10 and DEF STAN 61-12 Part 5. Internally Screened Jacketed Cable Type `C’ Cable and Wire Stripping Strip the outer P.V.C. jacket of the cable back to dim `A' to expose the internal braid. Trim the braid back to within 19.05mm (0.75 in) of P.V.C. jacket and fold back `B'. A Dimension Size 08 10,12,14 16 20 24 mm 58.15 66.68 69.85 88.9 95.25 in 2.89 2.625 2.75 3.50 3.75 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor. Tin the ends. If ends fray, twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order (1) Nut (2) Washer (3) Gasket (4) Braid Clamp (5) 75o Angled Body (6) Grommet. Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of the connector shell and against rear face of insert. 60 Assembly Instructions Externally Screened Jacketed Cables Type `B' & `Q' Cable and Wire Stripping Strip the outer braid and internal P.V.C. jacket of the cable back to dim `A'. A Dimension Size 08 10,12,14 16 20 24 mm 58.15 66.68 69.85 88.9 95.25 in 2.89 2.625 2.75 3.50 3.75 Strip 5.3mm (0.210 in) to 6.1 mm (0.240 in) of insulation from each wire to expose centre conductor Tin the ends. If ends fray, twist them back to their original lay before tinning. Initial Assembly Slide onto the cable the following items in this order:(1) Nut (2) Washer (3) Male Braid Clamp - Convolute Screen (See B) as far as possible and slide on items:(4) Female Braid Clamp (5) Gasket (6) 75o Right Angled Body (7) Grommet. Solder Connection to Contacts Insert the individual wires into the appropriate grommet holes. At the same time, slide the grommet back as far as possible, until the tinned ends of the centre conductors are far enough out of the grommet to permit soldering to the contacts. Insert the tinned ends of wires into the appropriate contacts in 62 series connector and solder into place. Slide the grommet forward over the wired contacts and press firmly into the rear of connector shell and against rear face of insert. Unscreened Jacketed Cables Type `A' All procedures concerning this type of cable to be as for internally screened jacketed cable, but all references to screen (Braid) to be disregarded. 61 Assembly Instructions Wire Accommodation Wire Stripping Wire Seal and Conductor Strip 5.3mm (0.210 in) to 6.1 mm (.240 in) of insulation from end of wires to expose centre conductor and tin the ends. If ends fray, twist them back to their original lay before tinning. Contact Size Colour Code 20 16 Red Blue Wire Insulation min. dia. max. dia. ins (mm) ins (mm) Conductor max. dia. ins (mm) 0.047 (1.19) 0.066 (1.68) 0.042 (1.07) 0.062 (1.57) 0.085 (2.16) 0.109 (2.77) Recommended Tightening Torques Single Hole Shell Size 8 10 12 14 16 18 20 22 24 Fixing Nm 3.73 4.07 6.78 7.34 8.25 9.26 11.98 13.90 15.03 Receptacles lbf. ins. 33 36 60 65 73 82 106 123 133 Nm 3.39-3.96 3.96-4.52 4.52-5.09 5.09-5.65 5.65-6.78 6.78-7.91 8.48-9.04 9.61-10.17 10.74-11.3 lbf. ins. 30-35 35-40 40-45 45-50 55-60 65-70 75-80 85-90 95-100 Accessories 62 Notice: Products are sold subject to Amphenol’s Standard Conditions of Sale. All specifications and statements contained herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement. Amphenol Thanet Way, Whitstable, Kent, CT5 3JF Tel: 01227 773200 Fax: 01227 276571 info@amphenol.co.uk www.amphenol.co.uk