65474-001.

BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ SHUNTS FEATURES & BENEFITS • Dual-beam contacts for added reliability • Slotted cutout in low profile housing simplifies electrical testing • Side-by-side and end-to-end stackable DUBOX™ SHUNTS TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: High temperature, black thermoplastic • File no. E66906 • Flammability rating: UL94V-0 •  File no. LR46923 • Pin: Phosphor-bronze • Product drawing: By 5-digit base part number • Plating: Gold or tin over 1.27μm (50μin.) nickel • Product specification: BUS-12-071-gold BUS-12-070-tin ELECTRICAL PERFORMANCE • Current rating: 2.5A max. per contact APPROVALS AND CERTIFICATIONS • Insulation resistance: 50,000MΩ min • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Contact resistance: 15MΩ max. initial, 20MΩ max. after environmental tests PACKAGING • Dielectric withstanding voltage: 800V • Plastic bags ENVIRONMENTAL • Operating temperature range: -65°C to +125°C MECHANICAL PERFORMANCE • Mating cycles (durability): 50-Gold, 25-Tin • Insertion force: • 450gf max. per gold contact • 500gf max. per tin-lead contact • Withdrawal force: • 30gf min. per gold contact • 30gf min. per tin-lead contact • Insertion depth: • 4.85 mm (.191in.) min. [provides 3.81 mm (.015in.) wipe] - Low profile TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ SHUNTS PART NUMBERS CORE RANGE 68786 202LF LOW PROFILE 68786 STANDARD PLATING 02 LF 63429 PLATING 02 0.76μm (30μin.) gold 2 0.76μm (30μin.) gold 2 Tin 3 Tin 3 MULTI-POSITION 69145 PLATING NUMBER OF POSITIONS 0.76μm (30μin.) gold 2 Tin 3 LF 4 to 20 positions PRODUCT 63429 68786 Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com 69145 Disclaimer Please note that the above information is subject to change without notice. LF BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ VERTICAL RECEPTACLES 8.50 FEATURES & BENEFITS • The Dubox™ contact has a pre-stressed, dual beam design to enable low insertion force • 4-wall contact design for signal protection DUBOX™ VERTICAL RECEPTACLES TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: Glass filled thermoplastic polyester, blue • File no. E66906 • Flammability rating: UL94V-0 •  File no. LR46923 • Pin: Phosphor-bronze • Product drawing: By 5-digit base part number • Plating: Gold or tin in accordance with IEC 603-8I • Product specification: HE 13/14 and IEC 603-8 ELECTRICAL PERFORMANCE APPROVALS AND CERTIFICATIONS • Current rating: 3A max. per individual contact 2A DC max. per contact for fully energized connector • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Insulation resistance: 1 x 105MΩ min. PACKAGING • Contact resistance: 15MΩ max. initial, 20MΩ max. after environmental tests • Plastic boxes or tubes PROCESSING INFORMATION • Dielectric withstanding voltage: 1000V RMS • Compatible with wave soldering processes ENVIRONMENTAL • Operating temperature range: -65°C to +125°C MECHANICAL PERFORMANCE • Mating cycles (durability): 200 • Insertion force per gold contact: 1.50 N (150gf) max. • Withdrawal force per gold contact: 0.30 N (30gf) min. • Insertion depth: • Top entry: 3.6mm min. to 6.81mm max. [provides .381mm wipe] • Bottom entry: 7mm min. [provides .381mm wipe] plus board thickness TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ VERTICAL RECEPTACLES PART NUMBERS 5 DIGIT BASE PART NUMBER Single row, top entry 75915 Single row, dual entry 71920 Double row, top entry 87606 Double row, dual entry 89891 PLATING POSITIONS PER ROW 0.76 μm (30μin.) gold on mating area, tin on solder side 3 LF 02 to 36* *0ther sizes available on request PRODUCT 75915 87606 75915 87606 71920 89891 89891 71920 Recommended PCB layouts Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ VERTICAL RECEPTACLES LOW PROFILE FEATURES & BENEFITS • The Dubox™ contact has a pre-stressed, dual beam design to enable low insertion force • 4-wall contact design for signal protection DUBOX™ VERTICAL RECEPTACLES LOW PROFILE TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: Glass filled thermoplastic polyester, blue • File no. E66906 • Flammability rating: UL94V-0 •  File no. LR46923 • Pin: Phosphor-bronze • Product drawing: By 5-digit base part number • Plating: Gold or tin over 1.27μm (50μin.) nickel • Product specification: BUS-12-055 ELECTRICAL PERFORMANCE APPROVALS AND CERTIFICATIONS • Current rating: 3A DC max. per individual contact 2A DC max. per contact for fully energized connector • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Insulation resistance: 1 x 105MΩ min. PACKAGING • Contact resistance: 15MΩ max. initial, 20MΩ max. after environmental tests • Plastic boxes or tubes PROCESSING INFORMATION • Dielectric withstanding voltage: 1000V RMS • Compatible with wave soldering processes ENVIRONMENTAL • Operating temperature range: -65°C to +125°C MECHANICAL PERFORMANCE TYPICAL APPLICATIONS • Mating cycles (durability): 200 • Insertion force per gold contact: 1.50 N (150gf) max. • Withdrawal force per gold contact: 0.30 N (30gf) min. • Insertion depth: • Top entry: 3.6mm min. to 6.7mm max. [provides .381mm wipe] • Bottom entry: 6mm min. [provides .381mm wipe] plus board thickness For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ VERTICAL RECEPTACLES LOW PROFILE PART NUMBERS 5 DIGIT BASE PART NUMBER Single row, top entry 76341 Double row, top entry 76342 Double row, dual entry 71991 PLATING POSITIONS PER ROW 0.76μm (30μin.) gold on mating area, tin on solder side (H) 3 LF 02 to 36* *0ther sizes available on request PRODUCT P/N 76341 Top Entry P/N 76342 Top Entry 76431 Top Entry 76432 Top Entry P/N 71991 Dual Entry 71991 Dual Entry Recommended PCB layouts Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ VERTICAL RECEPTACLES LOW PROFILE FEATURES & BENEFITS • The Dubox™ contact has a pre-stressed, dual beam design to enable low insertion force • 4-wall contact design for signal protection DUBOX™ VERTICAL RECEPTACLES LOW PROFILE TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: High temperature body, grey • File no. E66906 • Flammability rating: UL94V-0 •  File no. LR46923 • Pin: Phosphor-bronze • Product drawing: By 5-digit base part number • Plating: Gold or tin over 1.27μm (50μin.) nickel • Product specification: BUS-12-055 ELECTRICAL PERFORMANCE APPROVALS AND CERTIFICATIONS • Current rating: 3A DC max. per individual contact 2A DC max. per contact for fully energized connector • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Insulation resistance: 1x 105MΩ min. PACKAGING • Contact resistance: 15MΩ max. initial, 20MΩ max. after environmental tests • Plastic boxes or tubes • Tape-and-reel as available • Dielectric withstanding voltage: 1000V RMS PROCESSING INFORMATION ENVIRONMENTAL • Operating temperature range: -65°C to +125°C • Compatible with vapor-phase, and IR reflow soldering processes MECHANICAL PERFORMANCE • Mating cycles (durability): 200 • Insertion force per gold contact: 1.50 N (150gf) max • Withdrawal force per gold contact: 0.30 N (30gf) min • Insertion depth: • Top entry: 3.6mm min. to 6.7mm max. [provides .381mm wipe] • Bottom entry: 6mm min. [provides .381mm wipe] plus board thickness TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ VERTICAL RECEPTACLES LOW PROFILE PART NUMBERS CORE RANGE 89898 3XXALF XX = 02, 03, 04, 05, 06, 08, 10 5 DIGIT BASE PART NUMBER PLATING POSITIONS PER ROW OPTION LF Single row, dual entry 91601 02 to 25 Single row Standard-tubes - Single row, with external locating pegs, dual entry 91614 02 to 25 Double row A Double row, dual entry 89898 Double row with external locating pegs, dual entry 91615 Tape-and-reel packaging with pick-up cap* Double row with internal locating pegs, dual entry 91618 0.76μm (30μin.) gold on mating area, tin on solder side 3 *as available PRODUCT STANDARD EXTERNAL LOCATING PEGS SINGLE ROW + PAD LAYOUTS 89898 91614 91615 *Note: Available as of 3 positions versions INTERNAL LOCATING PEGS Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com DOUBLE ROW + PAD LAYOUTS 91601 *Note: Available as of 3 positions versions Not available in single row 91618 Note: All dimensions marked with * are minimum dimensions *Note: available as of 6 number of positions Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ HORIZONTAL RECEPTACLES FEATURES & BENEFITS • The Dubox™ contact has a pre-stressed, dual beam design to enable low insertion force • Floating solder tails self-center on circuit pads and assure coplanarity • 4-wall contact design for signal protection DUBOX™ HORIZONTAL RECEPTACLES TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: • Blue thermoplastic -Through hole • High temp. grey thermoplastic - Surface mount • File no. E66906 •  File no. LR46923 • Flammability rating: UL94V-0 • Product drawing: 71607, 71609, 89882, 89883 • Product specification: HE 13/14 and IEC 603-8 • Pin: Phosphor-bronze • Plating: Gold or tin over 1.27μm (50 μin.) nickel ELECTRICAL PERFORMANCE • Current rating: 3A DC max. per individual contact 2A DC max. per contact for fully energized connector • Insulation resistance: 1 x 105MΩ min. • Application specification: TA-842 for SMT • Tape-and-reel packaging data : TA-856 APPROVALS AND CERTIFICATIONS • This product is RoHS compatible according to the European Union Directive 2002/95/IEC PACKAGING • Contact resistance: 15MΩ max. initial, 20MΩ max. after environmental tests • Standard: Tubes • Dielectric withstanding voltage: 1000V RMS • Optional: Tape-and-reel ENVIRONMENTAL PROCESSING INFORMATION • Operating temperature range: -65°C to +125°C • Series 89882, 89883: compatible with wave soldering processes MECHANICAL PERFORMANCE • Series 71607, 71609: compatible with vapor-phase and IR reflow soldering processes • Mating cycles (durability): 200 • Insertion force per gold contact: 1.50 N (150gf) max. • Withdrawal force per gold contact: 0.30 N (30gf) min. • Insertion depth: • 3.6mm min. to 7.50mm max. [provides .381mm wipe] TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ HORIZONTAL RECEPTACLES PART NUMBERS 5 DIGIT BASE PART NUMBER PLATING POSITIONS PER ROW ALF 02 to 36 (TMT) 02 to 25 (SMT) Through hole (TMT), single row 89882 Through hole (TMT), double row 89883 Surface mount (SMT), single row 71607 Surface mount (SMT), double row 71609 0.76μm (30μin.) gold on mating area, tin on solder side 3 PRODUCT 89882 89883 71607 Recommended PCB layouts 71609 Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ SHROUDED HEADERS FEATURES & BENEFITS • For use with Dubox™ crimp-to-wire housings • Stackable end-to-end • Passive latching, anti-reverse and anti-miss-match when used with Dubox™ crimp-to-wire housings • Selective plating DUBOX™ SHROUDED HEADERS TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Housing: Glass filled thermoplastic polyester • File no. E66906 • Housing color for series 76382, 76383: blue Housing color for series 76384, 76385: black •  File no. LR46923 • Product drawing: By 5-digit base part number • Flammability rating: UL94V-0 • Application specification: TA-531 • Contact: Copper alloy • Plating: Gold or tin over 1.27μm (50μin.) nickel ELECTRICAL PERFORMANCE APPROVALS AND CERTIFICATIONS • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Current rating: 3A continuous PACKAGING • Insulation resistance: 1 x 105MΩ min. • 1x2 to 1x6 and 2x2 to 2x6: Plastic bags • Dielectric withstanding voltage: 1000V RMS • Other in tube ENVIRONMENTAL PROCESSING INFORMATION • Operating temperature range: -40°C to +125°C • Compatible with wave soldering processes MECHANICAL PERFORMANCE • Contact retention to housing: 20 N min. TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ SHROUDED HEADERS PART NUMBERS 5 DIGIT BASE PART NUMBER Single row, straight 76384 Single row, right angle 76382 Double row, straight 76385 Double row, right angle 76383 PLATING POSITIONS PER ROW LF 02 up to 18 0.76μm (30μin.) gold/GXT on mating area, tin on solder side 3 Tin 4 PRODUCT 76384 Recommended PCB Layouts 76382 76385 Recommended PCB Layouts 76383 Dimension in mm For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ CRIMP-TO-WIRE-CONTACTS FEATURES & BENEFITS • The Dubox™ contact has a pre-stressed, dual beam design to enable low insertion force • Mates with very short pins (5mm) • Universal crimp barrel accomodates wires from AWG 22-30 • Selective plating DUBOX™ CRIMP-TO-WIRE-CONTACTS TECHNICAL INFORMATION MATERIALS SPECIFICATIONS • Contact: Phosphor-bronze • File no. E66906 • Plating: 0.76μm (30μin.) Gold over 1.27μm (50μin.) nickel •  File no. LR46923 ELECTRICAL PERFORMANCE • Product drawing: By 5-digit base part number • Current rating: 3A continuous • Product specification: BUS-12-055 • Contact resistance after environmental test: 15mΩ max. – Contact • Application specification: TA-317, TA-340 APPROVALS AND CERTIFICATIONS • Dielectric withstanding voltage: 1000V RMS • This product is RoHS compatible according to the European Union Directive 2002/95/IEC ENVIRONMENTAL • Operating temperature range: -65°C to +125°C PACKAGING MECHANICAL PERFORMANCE • 1 Reels • Mating cycles (durability): 200 – Gold • Boxes - Loose piece • Insertion force gold finish contact: 1.3 N • Withdrawal force (min.) gold finish contact: 0.3 N • Contact retention force to housing: 15 N per contact • Insertion depth: • Discrete wire: 3.6mm min. to 5.6mm max. [provides .381 mm wipe] • Crimp-to-wire housing: 5.1mm min. to 6.2mm max. [provides .381mm wipe in housing] TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ CRIMP-TO-WIRE-CONTACTS PART NUMBERS CORE RANGE 76347 301LF PART NUMBERS / CONTACTS ON REEL Wire Size Insulation O.D. Selective Gold Plated Tin Plated Packaging 22-30 0.90 - 1.50 76347-301LF 76347-401LF 15.000/reel 22-30 0.90 - 1.50 76347-302LF• 76347-402LF• 15.000/reel 22-30 0.90 - 1.50 76347-303LF 76347-403LF 500/reel 20-22 1.10 - 1.60 76347-311LF 76347-411LF 15.000/reel 20-22 1.10 - 1.60 76347-312 LF• 76347-412LF• 15.000/reel PART NUMBERS / CONTACTS LOOSE PIECE Wire Size Insulation O.D. Selective Gold Plated Tin Plated 22-30 76357-401LF 1000/box 0.90 - 1.50 76357-301LF Packaging • : Reeled for application machine with left-to-right feeding PRODUCT Contacts to be used with housing = 65239-xxx / 65240-xxx Wire strip length = 3,00 ± 0,25 mm Mating pin size = 0,62 mm square Mating pin recommended length = 5,00 mm min. For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. BOARD/WIRE-TO-BOARD CONNECTORS DUBOX™ CRIMP-TO-WIRE-HOUSINGS FEATURES & BENEFITS • For use with Dubox™ crimp-to-wire contacts • Stackable end-to-end • Passive latching, anti-reverse and anti-miss-match when used with Dubox™ crimp-to-wire contacts • Contacts removable for easy repairability DUBOX™ CRIMP-TO-WIRE-HOUSINGS TECHNICAL INFORMATION MATERIALS APPROVALS AND CERTIFICATIONS • Housing: Glass filled thermoplastic polyester • This product is RoHS compatible according to the European Union Directive 2002/95/IEC • Housing color: Blue PACKAGING • Flammability rating: UL94V-0 • Bulk ELECTRICAL PERFORMANCE • Insulation resistance: 1 x 105MΩ min. • Dielectric withstanding voltage: 1000V RMS ENVIRONMENTAL • Operating temperature range: -65°C to +125°C MECHANICAL PERFORMANCE • Insertion depth: • 3.6mm min. to 6.0mm max. SPECIFICATIONS • File no. E66906 • File no. LR46923 • Product drawing: By 5-digit base part number • Application specification: TA-317, TA-340 TYPICAL APPLICATIONS For more information, please contact: Communications@fci.com or visit us at www.fci.com Disclaimer Please note that the above information is subject to change without notice. DUBOX™ CRIMP-TO-WIRE-HOUSINGS PART NUMBERS CORE RANGE 76347 301LF XX = 02, 03, 04, 05, 06, 08, 10 76347 301LF XX = 04, 06, 08, 10, 12, 16, 30 5 DIGIT BASE PART NUMBER Single row 0 65240 POSITIONS PER ROW LF 02 up to 36 Double row 65239 PRODUCT For more information, please contact: Communications@fci.com or visit us at www.fci.com BWBDUBOX2540813EA4 Pin size: 0.62mm square Recommended pin length: 5.00mm min. Disclaimer Please note that the above information is subject to change without notice.