67997-106HLF

BergStik® Headers Straight Unshrouded 2.54MM PITCH VERSATILE HEADERS WITH BREAKAWAY DESIGN BergStik® Amphenol FCI Basics 2.54mm unshrouded headers are offered in Surface-mount (SMT), Throughhole (THT), Press-fit (PF), and Pin-in-Paste (PIP) versions. Available in single and double rows from 2 to 72 positions. These “breakaway headers” can be cut or broken into specific lengths to suit the application profile with a maximum current rating of 3A per contact. The drawnwire pins offer an economical solution for various applications with durability of up to 100 mating. TARGET MARKETS § Same PCB layout for Through-Hole and PF versions § Multiple termination options: SMT, THT, PF, PIP § Fully compatible with Dubox® receptacles FEATURES BENEFITS § High temperature thermoplastic material § Re-flow compatible § Customizable height § Cater to a wide range of applications § Blank 0.64mm square contacts present 4 surfaces of equal § Suitable for mezzanine application and gives more flexibility quality in meeting different stack height requirements § Standoff design § Can be used for wire wrapping § Duplex plating § Allows cleaning to remove soldering contamination § Tin-lead plating in press-fit area § Cost efficient § Press-fit designed to fit 1.02mm diameter hole, solder-to- § Easy pin insertion onto PCB board products § Meets DIN 41651 specification, HE 13, and BT D2632 § High retention force onto PCB § Same layout on THT and press-fit § Qualified product www.amphenol-cs.com BergStik® Headers Straight Unshrouded TECHNICAL INFORMATION MATERIAL SPECIFICATIONS § Housing: High temperature thermoplastic § Product Specification: BUS-12-050 / BUS-12-144 (duplex plated) / BUS-12-117 (press-fit) § Flammability Rating: UL94V-0 § Pin: Phosphor Bronze APPROVALS & CERTIFICATION § Plating: Gold / GXT® or Tin over 1.27µm (50µin) Nickel § UL Approval: E66906 MECHANICAL PERFORMANCE PACKAGING § Pin Retention Force to Housing: 9N min. § Poly bags ELECTRICAL PERFORMANCE § Endless reels § Optional: Tubes or Tape and Reel with pick-up cap (if § Current Rating: available) § 3A continuous § 2A DC max. per contact for fully energized connector § Insulation Resistance: 5000MΩ min. TOOLING INFORMATION § Insertion tool: 30AWG to 20AWG TARGET MARKETS/APPLICATIONS § Dielectric Withstanding Voltage: 1500Vrms min. Personal Care Devices (Air Dryer) Home Care Devices (Cleaning Robot) Home Automation (Alarm System) ENVIRONMENTAL § Operating Temperature Range: -65°C to +125°C Server Storage Robotics Programmable Logic Controller (PLC) Power Tool PART NUMBERS Description Part Numbers Unshrouded Header, Straight, Single Row, TMT 77311 Unshrouded Header, Straight, Single Row, SMT 95293 Unshrouded Header, Straight, Single Row, Press-Fit 93689 Unshrouded Header, Straight, Double Row, TMT 77313 Unshrouded Header, Straight, Double Row, SMT 95278 Unshrouded Header, Straight, Double Row, Press-Fit 93690 www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BergStik® Headers Straight Unshrouded PART NUMBER SELECTOR - STRAIGHT UNSHROUDED HEADERS 77311 Y XX BASE PART NUMBER Plating Option 1 0.76µm GXT® on contact area 4 2µm tin on contact area 8 0.38µm GXT® on contact area XX LF Lead-free compatibility Total number of positions Pin Style 01 Mating side = 5.84mm Solder side = 2.41mm 02 Mating side = 5.84mm Solder side = 3.42mm 18 Mating side = 5.84mm Solder side = 3.05mm Other plating options available upon request BASICSBRGSTKHDRSUH1223EA4 Other pin styles available upon request www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BergStik® Headers Stacking Unshrouded 2.54MM PITCH CUSTOMIZABLE STACKING HEADERS WITH BREAKAWAY DESIGN BergStik® Amphenol FCI Basics 2.54mm Stacking Unshrouded Headers are offered in Surface-mount (SMT), Through-hole (THT), Press-fit (PF) and Pin-inPaste (PIP) versions. Available in single and double row from 2 to 72 positions. These “breakaway headers” can be cut or broken into specific lengths to suit the application profile with a maximum current rating of 3A per contact. The drawn-wire pins offer an economical solution for various applications with durability up to 100 mating cycles. TARGET MARKETS § Duplex, triplex or full plating § Height up to 55.00mm (duplex plating) and 65.00mm (triplex) § Multiple termination options: SMT, THT, PF, PIP § Fully compatible with Dubox® receptacles FEATURES BENEFITS § High temperature thermoplastic material § Re-flow compatible § Customizable height § Cater to a wide range of applications § Allow dual entry, mating from top or bottom § Suitable for mezzanine application and gives more flexibility in meeting different stack height requirements § Blank 0.64mm square contacts present four surfaces of § Can be used for wire wrapping equal quality § Standoff design § Allows cleaning to remove soldering contamination § Duplex plating § Cost efficient § Tin-lead plating in press-fit area § Easy pin insertion onto PCB § Press-fit designed to fit 1.02mm diameter hole, solder-to- § High retention force onto PCB board products § Meets DIN 41651 specification, HE 13, and BT D2632 § Same layout on THT and Press-fit § Qualified product www.amphenol-cs.com BergStik® Headers Stacking Unshrouded TECHNICAL INFORMATION MATERIAL SPECIFICATIONS § Housing: High temperature thermoplastic § Product Specification: BUS-12-050 / BUS-12-144 (duplex § Flammability Rating: UL94V-0 plated) / BUS-12-117 (press-fit) § Pin: Phosphor Bronze APPROVALS & CERTIFICATION § Plating: Gold / GXT® or Tin over 1.27µm (50µin) Nickel § UL Approval: E66906 MECHANICAL PERFORMANCE PACKAGING § Pin Retention Force to Housing: 9N min. § Poly bags ELECTRICAL PERFORMANCE § Optional: Tubes or Tape and Reel with pick-up cap (if § Current Rating: § 3A continuous 2ADC max. per contact for fully energized available) TARGET MARKETS/APPLICATIONS connector Personal Care Devices (Air Dryer) Home Care Devices (Cleaning Robot) Home Automation (Alarm System) § Insulation Resistance: 5000MΩ min. § Dielectric Withstanding Voltage: 1500Vrms min. Server Storage ENVIRONMENTAL § Operating Temperature Range: -65°C to +125°C Robotics Programmable Logic Controller (PLC) Power Tool PART NUMBERS Description Part Numbers Unshrouded Stacking Header, Vertical, Single Row, TMT 54121 Unshrouded Stacking Header, Vertical, Single Row, Press-Fit 10124323 Unshrouded Stacking Header, Vertical, Double Row, TMT 54122 Unshrouded Stacking Header, Vertical, Double Row, SMT 54242 Unshrouded Stacking Header, Vertical, Double Row, Press-Fit 10112620 www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BergStik® Headers Stacking Unshrouded PART NUMBER SELECTOR - STACKING UNSHROUDED HEADERS 54121 Y XX XX XXXX BASE PART NUMBER LF Lead-free compatibility Stack height (in mm) Example for stack height: 1270 = 12.70mm Total number of positions Pin Style (OAL) See selection guide below. Available upon request Plating Option 1 0.76µm GXT® on contact area 4 2µm Tin on contact area 8 0.38µm GXT® on contact area Other plating options available upon request PART OVERVIEW § Mating Length: The length of the connector part that inserts into the receptacle, ensuring a secure electrical connection § Solder Tail: The part of the connector used for soldering onto the printed circuit board, ensuring a secure attachment § OAL (Overall Length): The total length of the connector, including the mating length and solder tail, determining the overall size of the connector § Stack Height: The total stack height of the connectors when assembled, influencing the overall arrangement of electronic components (between housing) 54112, 54122 - Stacking Headers – Double Row – Through Hole www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BergStik® Stacking Unshrouded Headers STANDARD CONFIGURATION A Optimal OAL Formula*: Your Board-to-Board Distance – 3.40mm STANDARD CONFIGURATION B Optimal OAL Formula*: Your Board-to-Board distance – 1.70mm STANDARD CONFIGURATION C Optimal OAL Formula*: Your Board-to-Board Distance + your PCB thickness + 5.50mm Optimal OAL Formula*: Your Board-to-Board Distance + your PCB thickness + 7.20mm This calculation formula is applicable only with low-profile DUBOX receptacles (7.00mm high) www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BASICSBRGSTKSTCKUH1223EA4 STANDARD CONFIGURATION D BergStik® Headers Right-Angle Unshrouded 2.54MM PITCH VERSATILE HEADERS WITH BREAKAWAY DESIGN BergStik® Amphenol FCI Basics 2.54mm unshrouded headers are offered in Surface-mount (SMT), Throughhole (THT), and Pin-in-Paste (PIP) versions. Available in single and double rows from 2 to 72 positions. These “breakaway headers” can be cut or broken into specific lengths to suit the application profile with a maximum current rating of 3A per contact. The drawnwire pins offer an economical solution for various applications with durability of up to 100 mating. § Same PCB layout for Through-Hole and PF versions § Multiple termination options: SMT, THT, PIP § Fully compatible with Dubox® PCB receptacles TARGET MARKETS FEATURES BENEFITS § High temperature thermoplastic material § Re-flow compatible § Customizable height § Cater to a wide range of applications § Blank 0.64mm square contacts present four surfaces of § Suitable for mezzanine application and gives more equal quality flexibility in meeting different stack height requirements § Standoff design § Can be used for wire wrapping § Duplex plating § Allows cleaning to remove soldering contamination § Tin-lead plating in press-fit area § Cost efficient § Press-fit designed to fit 1.02mm diameter hole, solder-to- § Easy pin insertion onto PCB board products § Meets DIN 41651 specification, HE 13, and BT D2632 § High retention force onto PCB § Same layout on THT and Press-fit § Qualified product www.amphenol-cs.com BergStik® Headers Right-Angle Unshrouded TECHNICAL INFORMATION MATERIAL SPECIFICATIONS § Housing: High temperature thermoplastic § Product Specification: BUS-12-050 / BUS-12-144 (duplex plated) / BUS-12-117 (press-fit) § Flammability Rating: UL94V-0 § Pin: Phosphor Bronze APPROVALS & CERTIFICATION § Plating: Gold / GXT® or Tin over 1.27µm (50µin) Nickel § UL Approval: LR46923 MECHANICAL PERFORMANCE PACKAGING § Pin Retention Force to Housing: 9N min. § Poly bags ELECTRICAL PERFORMANCE § Optional: Tubes or Tape and Reel with pick-up cap § Current Rating: 3A continuous 2A DC max. per contact for TOOLING INFORMATION fully energized connector § Insertion tool: 30AWG to 20AWG § Insulation Resistance: 5000MΩ min. TARGET MARKETS/APPLICATIONS § Dielectric Withstanding Voltage: 1500Vrms min. Personal Care Devices (Air Dryer) Home Care Devices (Cleaning Robot) Home Automation (Alarm System) ENVIRONMENTAL § Operating Temperature Range: -65°C to +125°C Server Storage Robotics Programmable Logic Controller (PLC) Power Tool PART NUMBERS Description Part Numbers Unshrouded Header, Horizontal, Single Row, TMT/PIP 77315 Unshrouded Header, Horizontal, Single Row, SMT 10119333 Unshrouded Header, Horizontal, Double Row, TMT/PIP 77317 Unshrouded Header, Horizontal, Double Row, SMT 10118084 PART NUMBER SELECTOR - RIGHT-ANGLE UNSHROUDED HEADERS 77315 Y XX XX LF Lead-free compatibility BASE PART NUMBER Total number of positions 1 0.76µm GXT® on contact area Pin Style 4 2µm tin on contact area 01 8 0.38µm GXT® on contact area Mating side = 5.72mm Solder side = 2.57mm 18 Mating side = 5.84mm Solder side = 3.05mm Other plating options available upon request Other pin styles available upon request www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BASICSBRGSTKRAUH1223EA4 Plating Option BergStik® SHUNTS Board/Wire-to-Board Connectors RELIABLE DESIGN, ENHANCED RETENTION Amphenol’s BergStik® SHUNTS has a comprehensive and extensive solution designed with solder tails self center on circuit pads to assure coplanarity. A locating feature helps to maintains alignment for soldering and facilitates robot placement. § Dual beam contact design to ensure high reliable electrical performances § Contact pre-stressed that requires low insertion force required § 4 wall contact design for signal protection TARGET MARKETS FEATURES BENEFITS § Dual beam contact design § Highly reliable electrical performances § Pre-stressed contact § Low insertion force § Mates with very short pins (5mm) and are stackable end- § Suitable for mezzanine applications and meets different to-end and side-by-side application requirements § Floating solder tails with self-centering on the circuit pads § Assures coplanarity § 4 wall contact design § Improved signal protection § Duplex plating § Cost efficient § Locating feature available § Maintains the alignment for soldering and facilitates robotic placement § High temperature thermoplastic material § Compatible with Infrared and Vapor phase reflow § Compliant to DIN41651 specifications, HE13 and BT D2632 § Qualifies industry specific standards www.amphenol-cs.com BergStik® SHUNTS Board/Wire-to-Board Connectors TECHNICAL INFORMATION MATERIAL SPECIFICATIONS § Housing: High temperature, Black thermoplastic § File No. E66906 § Flammability Rating: UL94V-0 § File No. LR46923 § Pin: Phosphor Bronze § Product Drawing: By 5-digit base part number § Plating: Gold or Tin over 1.27μm (50μin) Nickel § Product Specification: § BUS-12-071-gold MECHANICAL PERFORMANCE § BUS-12-070-tin § Mating cycles (durability): 50-Gold, 25-Tin ENVIRONMENTAL § Insertion force: § 450gf max. per gold contact § Operating Temperature Range: -65°C to +125°C § 500gf max. per tin-lead contact APPROVALS & CERTIFICATION § Withdrawal force: § This product is RoHS compatible according § 30gf min. per tin-lead contact PACKAGING § Insertion depth: § Plastic bags § 4.85 mm (.191in.) min. [provides 3.81 mm (.015in.) wipe] - Low profile TARGET MARKETS/APPLICATIONS Personal Care Devices (Air Dryer) Home Care Devices (Cleaning Robot) Home Automation (Alarm System) ELECTRICAL PERFORMANCE § Current Rating: 2.5A max. per contact § Insulation Resistance: 50,000MΩ min. § Contact Resistance: 15MΩ max. initial, to the European Union Directive 2002/95/IEC § 30gf min. per gold contact 20MΩ max. after environmental tests Sever Storage Robotics Programmable Logic Controller (PLC) Power Tool § Dielectric Withstanding Voltage: 800V TYPICAL APPLICATIONS PART NUMBERS Description Part Series Shunt Low Profile, Single Row 68786 Shunt Low Profile, Double Row, Multi-position 87606 Shunt Standard, Single Row 63429 www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice. BergStik® SHUNTS Board/Wire-to-Board Connectors PART NUMBER SELECTOR SHUNTS CORE RANGE 68786 202LF LOW PROFILE 68786 X 02 LF Lead-free compatibility BASE PART NUMBER Plating Option 2 0.76µm GXT® on contact area 3 2µm Tin on contact area Other plating options available upon request MULTI-POSITION 69145 X XX LF Lead-free compatibility BASE PART NUMBER Number of positions (04 to 20 positions) STANDARD 63429 BASE PART NUMBER X 02 LF Lead-free compatibility Plating Option 2 0.76µm GXT® on contact area 3 2µm Tin on contact area BASICSBRGSTKSHUNTS1223EA4 Other plating options available upon request www.amphenol-cs.com Disclaimer Please note that the above information is subject to change without notice.