Quickie® Shrouded Headers Low
Profile
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Pin-in-paste versions and direct IDC-to-board one-piece
solutions are available
TARGET MARKETS
FEATURES
BENEFITS
§ Four-walled shrouded headers
§ Protect pins in unmated condition and prevents misalignment
§ Low profile headers with side window
§ Enables unique locking through latching strain relief
§ Selective plated pins of headers
§ Cost efficient, while maintaining excellent performance
§ According to DIN 41651, HE10 and BT D2632
§ Industry qualified, proven products
www.amphenol-cs.com
Quickie® Shrouded Headers Low Profile
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: Glass filled, thermoplastic polyester, blue
§
CUL E66906, 2
§
Flammability Rating: UL94V-0
§
Product Drawing: By 5-digit base part number
§
Pin: Phosphor-bronze
§
Product Specification: BUS-12-082
§
Plating: Gold/GXT plating thickness 0.76µm and over
APPROVALS & CERTIFICATION
1.27μm (50μin.) nickel
MECHANICAL PERFORMANCE
§
This product is RoHS compatible according to the European
Union Directive 2002/95/IEC
§
Pin Retention to Housing: 20N min.
PACKAGING
ELECTRICAL PERFORMANCE
§
Tubes
§
Current Rating: 3A continuous
PROCESSING INFORMATION
§
Insulation Resistance: 1 x 105MΩ min.
§
Dielectric Withstanding Voltage: 500V RMS min.
ENVIRONMENTAL
§
Operating Temperature Range: -65°C to +105°C
§
Compatible with wave soldering processes
TARGET MARKETS/APPLICATIONS
Electronic Control Systems
Servers
Communication Equipment
Industrial Automation
Instrumentation
Vending Machines
Medical
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Low Profile
PART NUMBERS
5 - DIGIT BASE
PART NUMBER
1
TOTAL POSITIONS
LF
Through Mount
Vertical
75869
Description
Part Numbers
Right angle
75867
4 pos.
30
6 pos.
31
8 pos.
32
10 pos.
01
14 pos.
02
16 pos.
03
20 pos.
04
26 pos.
05
34 pos.
06
40 pos.
07
50 pos.
08
60 pos.
09
64 pos.
10
0.76μm (30μin.) gold/GXT on
mating area, tin on solder side
1
BWBQUICKIDC0122EA4
DIMENSIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Low
Profile SMT, Pin-in-Paste
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Pin-in-paste versions and direct IDC-to-board one-piece
solutions are available
TARGET MARKETS
FEATURES
BENEFITS
§ Four-walled shrouded headers
§ Protect pins in unmated condition and prevents misalignment
§ Low profile headers with side window
§ Enables unique locking through latching strain relief
§ Selective plated pins of headers
§ Cost efficient, while maintaining excellent performance
§ According to DIN 41651, HE10 and BT D2632
§ Industry qualified, proven products
www.amphenol-cs.com
Quickie® Shrouded Headers Low Profile SMT, Pin-in-Paste
TECHNICAL INFORMATION
MATERIAL
APPROVALS & CERTIFICATION
§
Housing: Glass filled, thermoplastic polyester, black
§
This product is RoHS compatible according to the European
§
Flammability Rating: UL94V-0
Union Directive 2002/95/IEC
§
Pin: Phosphor-bronze
PACKAGING
§
Plating: Gold/GXT plating thickness 0.76µm and over
§
SMT: Tape-and-reel with pick-up cap
1.27μm (50μin.) nickel
§
PiP, Right Angle: Tube without pick-up cap
MECHANICAL PERFORMANCE
§
PiP, Straight: Tape-and-reel
§
Pin Retention to Housing: 20N min.
PROCESSING INFORMATION
ELECTRICAL PERFORMANCE
§
Compatible with wave, vapor-phase, and IR reflow soldering
§
Current Rating: 3A continuous
§
Insulation Resistance: 1 x 105MΩ min.
processes
TARGET MARKETS/APPLICATIONS
§
Dielectric Withstanding Voltage: 500V RMS min.
ENVIRONMENTAL
Electronic Control Systems
§
Operating Temperature Range: -65°C to +125°C
SPECIFICATIONS
§
CUL E66906, 2
§
Product Drawing: By 5-digit base part number
§
Product Specification: BUS-12-082
Communication Equipment
Servers
Industrial Automation
Instrumentation
Vending Machines
Medical
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Low Profile SMT, Pin-in-Paste
PART NUMBER SELECTOR - SMT (SURFACE MOUNT)
52601
G
TOTAL POSITIONS
Plating = 0.76μm (30μin.)
gold/GXT on mating area,
tin on solder side
10
TLF
T
Tape & reel with pick up cap
14
16
20
26
30
34
40
44
50
60
PART NUMBER SELECTOR - PIP (PIN-IN-PASTE)
BASE PART
NUMBER
G
TOTAL POSITIONS
OPTION
LF
Vertical
10056844
8
Through Mount
Right angle
10056845
10
Tape & reel with pick up cap for vertical
A
14
Tube for right angle
Blank
16
Tape & reel for right angle
K
Plating = 0.76μm (30μin.)
gold/GXT on mating area,
tin on solder side
20
26
30
34
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Low Profile SMT, Pin-in-Paste
BWBQUICKIDC0122EA4
PRODUCT
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Eject
Latch
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Pin-in-paste versions and direct IDC-to-board one-piece
solutions are available
TARGET MARKETS
FEATURES
BENEFITS
§ Four-walled shrouded headers
§ Protect pins in unmated condition and prevents misalignment
§ Selective plated pins of headers
§ Cost efficient, while maintaining excellent performance
§ Eject latch headers unique lock and eject system
§ Minimizes PCB space required and allowing dense packaging
design
§ According to DIN 41651, HE10 and BT D2632
www.amphenol-cs.com
§ Industry qualified, proven products
Quickie® Shrouded Headers Eject Latch
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: Glass filled, thermoplastic polyester, grey
§
CUL E66906, 2
§
Flammability Rating: UL94V-0
§
Product Drawing: By 5-digit base part number
§
Pin: Phosphor-bronze
§
Product Specification: BUS-12-082
§
Plating: Gold/GXT plating thickness 0.76µm and over
APPROVALS & CERTIFICATION
1.27μm (50μin.) nickel
MECHANICAL PERFORMANCE
§
This product is RoHS compatible according to the European
Union Directive 2002/95/IEC
§
Pin Retention to Housing: 20N min.
PACKAGING
ELECTRICAL PERFORMANCE
§
Tubes
§
Current Rating: 3A continuous
PROCESSING INFORMATION
§
Insulation Resistance: 1 x 105MΩ min.
§
Dielectric Withstanding Voltage: 500V RMS min.
ENVIRONMENTAL
§
Operating Temperature Range: -65°C to +105°C
§
Compatible with wave soldering processes
TARGET MARKETS/APPLICATIONS
Electronic Control Systems
Servers
Communication Equipment
Industrial Automation
Instrumentation
Vending Machines
Medical
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Eject Latch
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® Shrouded Headers Eject Latch
PART NUMBERS
71918
1XXLF
71922
1XXLF
5 - DIGIT BASE
PART NUMBER
LATCH
STYLE
TOTAL POSITIONS
LF
Through Mount
Vertical
71918
Right angle
71922
Standard (mates with IDC receptacle with strain relief)
1
Low profile (mates with IDC
receptacle without strain relief)
2
06
26
08
30
10
34
14
40
16
44
18
50
20
60
64
BWBQUICKIDC0122EA4
PRODUCT
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® IDC Receptacles
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Pin-in-paste versions and direct IDC-to-board one-piece
solutions are available
TARGET MARKETS
FEATURES
BENEFITS
§ Selective plated pins of headers
§ Cost efficient, while maintaining excellent performance
§ Single beam IDC and DIL receptacle contact with long
§ Ensures good contact and excellent electrical performance
wiping action
§ According to DIN 41651, HE10 and BT D2632
www.amphenol-cs.com
during long field life (100 mating cycles)
§ Industry qualified, proven products
Quickie® IDC Receptacles
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: Grey thermoplastics
§
CUL E66906, 2
§
Flammability Rating: UL94V-0
§
Product Drawing: By 5-digit base part number
§
Contact: Phosphor-bronze
§
Product Specification: BUS-12-095
§
Plating: Gold/GXT over 1.27μm (50μin.) nickel
APPROVALS & CERTIFICATION
MECHANICAL PERFORMANCE
§
This product is RoHS compatible according to the European
§
Mating Cycles (durability): 100
ELECTRICAL PERFORMANCE
§
Current Rating: 1A continuous
Union Directive 2002/95/IEC
PACKAGING
§
Tubes
§
Insulation Resistance: 1 x 105MΩ min.
PROCESSING INFORMATION
§
Contact Resistance: 15mΩ max.
§
No compatible to soldering process
§
Dielectric Withstanding Voltage: 500V RMS min.
TARGET MARKETS/APPLICATIONS
ENVIRONMENTAL
§
Operating Temperature Range: -65°C to +105°C
Electronic Control Systems
Servers
Communication Equipment
Industrial Automation
Instrumentation
Vending Machines
Medical
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® IDC Receptacles
PART NUMBERS
71600
0XXLF
71600
STRAIN
RELIEF
Standard (mates with shrouded
eject latch header latch 1)
0
None (mates with shrouded
eject latch header latch 2)
1
Latching (mates with low profile
headers)
6
Note: 4 position available without strain relief
only
TOTAL POSITIONS
04
26
06
34
08
40
10
50
14
60
16
64
LF
20
BWBQUICKIDC0122EA4
PRODUCT
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® IDC PCB Connector
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Pin-in-paste versions and direct IDC-to-board one-piece
solutions are available
TARGET MARKETS
FEATURES
BENEFITS
§ Selective plated pins of headers
§ Cost efficient, while maintaining excellent performance
§ Single beam IDC and DIL receptacle contact with long
§ Ensures good contact and excellent electrical performance
wiping action
§ According to DIN 41651, HE10 and BT D2632
www.amphenol-cs.com
during long field life (100 mating cycles)
§ Industry qualified, proven products
Quickie® IDC PCB Connector
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: Blue thermoplastics
§
CUL E66906
§
Flammability Rating: UL94V-0
§
Product Drawing: By 5-digit base part number
§
Pin: Phosphor-bronze
§
Product Specification: BUS-110-019
§
Plating: Tin over 1.27μm (50μin.) nickel
APPROVALS & CERTIFICATION
ELECTRICAL PERFORMANCE
§
This product is RoHS compatible according to the European
§
Current Rating: 1A continuous
Union Directive 2002/95/IEC
§
Insulation Resistance: 1 x 105MΩ min.
PACKAGING
§
Contact Resistance: 20MΩ max.
§
Tubes
§
Dielectric Withstanding Voltage: 750V AC
PROCESSING INFORMATION
ENVIRONMENTAL
§
Compatible with wave, vapor-phase and soldering processes
§
Operating Temperature Range: -65°C to +105°C
- Low temperature
TARGET MARKETS/APPLICATIONS
Electronic Control Systems
Servers
Communication Equipment
Industrial Automation
Instrumentation
Vending Machines
Medical
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® IDC PCB Connector
PART NUMBERS
69830
0
TOTAL POSITIONS
06
06
08
08
10
10
14
14
16
16
18
18
20
20
24
24
26
26
30
30
34
34
40
40
50
50
60
60
64
64
LF
BWBQUICKIDC0122EA4
PRODUCT
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® II Connector Dual Beam
Amphenol’s FCI Basics Quickie® is a complete solution for
flat cable-to-board connections using 2.54mm pitch IDC
technology. The highly durable and cost-saving connectors
come with specialized features in polarization, plating, and
structure. Headers are low profile and come in shrouded
versions with or without eject latches. Receptacles have
strain relief covers for precise alignment.
The pre-loaded adjustable bridge-type cover reduces
assembly time, protects contacts and offers precise coverto-base alignment ensuring a reliable termination.
§ Dual polarization feature prevents connector mismating
§ Duplex plating saves cost and guarantees 100+ mating
cycle performance
§ IDC headers have four-walled shielded design for pin
protection and misalignment prevention
§ Dual beam contact system for high retention and high
reliability
TARGET MARKETS
FEATURES
BENEFITS
§ Pre-loaded cover reduces time and cost by eliminating
§ Precise alignment of cover-to-base ensures a reliable
assembly-to-base
§ Cover protects contacts during handling
termination
§ Double serrated cable slot assists accurate positioning of the
cable over the contacts
§ Dual entry cover enables insertion of cable from both sides
§ Dual beam contacts provide cleaning of contact surface and
guarantee a reliable connection
§ Sight holes in cover allow for visual and electrical
inspection before and after assembly
www.amphenol-cs.com
§ Optional central polarization of double polarization designed
to meet MIL-C-83503-7A
Quickie® II Connector Dual Beam
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: Glass filled, thermoplastic polyester, blue
§
CUL E66906, 2
§
Flammability Rating: UL94V-0
§
Product Drawing: By 5-digit base part number
§
Pin: Phosphor-bronze
§
Product Specification: BUS-12-082
§
Plating: Gold/GXT plating thickness 0.76µm and over
1.27µm (50µin.) nickel
MECHANICAL PERFORMANCE
TARGET MARKETS/APPLICATIONS
Electronic Control Systems
§
Number of Mating Cycles: 100 cycles
ELECTRICAL PERFORMANCE
Servers
§
Current Rating: 1A continuous
§
Insulation Resistance: 1 x 105MΩ min.
§
Dielectric Withstanding Voltage: 500V RMS min.
ENVIRONMENTAL
§
Operating Temperature Range: -65°C to +105°C
APPROVALS & CERTIFICATION
§
This product is RoHS compatible according to the
Communication Equipment
Industrial Automation
Instrumentation Vending Machines
Medical
European Union Directive 2002/95/IEC
PACKAGING
§
Tubes
TYPICAL APPLICATIONS
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
Quickie® II Connector Dual Beam
PART NUMBER SELECTOR
66900
X
With strain relief
2
Without strain relief
3
XX
LF
Lead-free compatibility
BASICSQUICKIEII0322EA4
Total number of positions
www.amphenol-cs.com
Disclaimer
Please note that the above information is subject to change without notice.
