786A

General purpose accelerometer 786A SPECIFICATIONS Sensitivity, ± 5%, 25°C 100 mV/g Acceleration range, VDC > 25 V 80 g peak Amplitude nonlinearity 1% Frequency response: ± 5% ± 10%  ± 3 dB 3 - 5,000 Hz 1 - 9,000 Hz 0.5 - 14,000 Hz Resonance frequency 30 kHz Transverse sensitivity, max 5% of axial Temperature response: –55°C   +120°C Key features –20% +10% • MTBF 25 years • Certified versions available for use in hazardous areas • API 670 compliant • Manufactured in ISO 9001 facility Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. g: Broadband   2.5 Hz to 25 kHz Spectral 10 Hz   100 Hz   1,000 Hz 700 µg 10 µg/√Hz 5 µg/√Hz 5 µg/√Hz Output impedance, max 100 Ω Bias output voltage 12 VDC Grounding case isolated, internally shielded Temperature range –55° to +120°C Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. g, max 70 µg/gauss Sealing hermetic Base strain sensitivity, max 0.0002 g/μstrain Sensing element design PZT, shear Weight 90 grams Case material 316L stainless steel Mounting 1/4-28 UNF tapped hole Mating connector MIL-5015 style Recommended cabling J10 / J9T2A MIL-C-5015 2 PIN CONNECTOR 2.08 Ø.86 7/8 HEX Ø.75 1/4-28 MOUNTING STUD 0.15 Accessories supplied: SF6 mounting stud; calibration data (level 2) Optional certified versions available for use in hazardous areas: - Class I Div 1 (Zone 0/1) - Class I Div 2 (Zone 2) Connections Function power/signal common ground Connector pin A B shell Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 98692 Rev.E.2 09/18 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com