786V

Piezoelectric velocity transducer 786V SPECIFICATIONS Sensitivity, ± 5%, 25°C 100 mV/in/sec Velocity range 50 in/sec peak Amplitude nonlinearity ±1% of F.S. Frequency response: ± 10%  ± 3 dB 2 - 6,000 Hz 1 - 12,000 Hz Resonance frequency, nominal 30 kHz Transverse sensitivity, max 5% of axial Power requirement: Voltage source Current regulating diode 18 - 30 VDC 2 - 10 mA Electrical noise, equiv. in/sec, nominal: Broadband   2.5 Hz to 25 kHz Spectral 10 Hz   100 Hz   1,000 Hz 2,050 µin/sec rms 250 µin/sec/√Hz 12 µin/sec/√Hz 5 µin/sec/√Hz Output impedance, max 200 Ω Bias output voltage, nominal 12 VDC Grounding case isolated, internally shielded Temperature range –50° to +120°C Vibration limit 500 g peak Shock limit 5,000 g peak Electromagnetic sensitivity, equiv. in/sec 25 µin/sec/gauss Sealing hermetic Relative humidity 100% Protection rating IP67 Sensing element design PZT, shear Weight 90 grams Case material 316L stainless steel Mounting 1/4-28 UNF tapped hole Output connector 2 pin, MIL-C-5015 style Mating connector R6 type Recommended cabling J9T2A Key features • Internally integrated to velocity • High frequency range • Manufactured in ISO 9001 facility Accessories supplied: SF6 mounting stud; calibration data (level 2) Connections Function power/signal common ground Connector pin A B shell Note: Due to continuous process improvement, specifications are subject to change without notice. This document is cleared for public release. Wilcoxon Sensing Technologies An Amphenol Company 99401 Rev.A 06/21 8435 Progress Drive Frederick, MD 21701 USA Tel: +1 (301) 330-8811 Fax: +1 (301) 330-8873 info@wilcoxon.com buy.wilcoxon.com www.wilcoxon.com