82-340-1052

NOTES: 1. REVISIONS THIRD ANGLE PROJ. MATERIALS AND FINISHES BODY,OUTER CONTACT & COUPLING NUT CONTACT INSULATOR FERRULE RETAINING RING GASKET - REV : 2. ELECTRICAL: A. IMPEDANCE: 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $C TO +165 $C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 82-340-1052 , AND DATE CODE" -- 0.539 BRASS,NICKEL PLATING BRASS,SILVER PLATING PTFE COPPER,NICKEL PLATING PHOSPHOR BRONZE SILICONE RUBBER DESCRIPTION RELEASE TO MFG. D 0.093 DIELECTRIC DATE ------ REDRAWN IN PRO-E , ADD COD 2/24/14 ECO -----49780 APPR -----CL 0.158 CENTER CONDUCTOR 50 OHM RECOMMENDED CABLE STRIPPING DIMENSIONS 5. CABLE ASSEMBLY INSTRUCTIONS A. TRIM CABLE AS SHOWN. B. INSERT CABLE CENTER CONDUCTOR TO CONTACT.SOLDER OR CRIMP CONTACT WITH C. INSERT CABLE INTO CONNECTOR WITH BRAID OVER KNURL UNTIL IT BOTTOMS. D. CRIMP FERRULE WITH 0.429" HEX DIE. SCALE 1.500 1.180 REF 0.880 REF 0.116" HEX DIE. 0.827 REF 6. SHOWS CABLE ENTRY DIMENSIONS. 0.112 0.120 REF 0.418 0.299 INTERFACE PER MIL STD-348 SERIES:TYPE N PLUG CONTACT FERRULE 0.738 REF 0.600 REF STAMP "AMPHENOL 82-340-1052" MIL-C-39012 INSPECTION UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE EAR # 962090-5 (611X-3354) CONFIGURATION LEVEL: In Work FINISH DRAWN CLEMENT DATE 23-Oct-13 ENGINEER CLEMENT DATE 23-Oct-13 APPROVED K. CAPOZZI DATE 2/21/14 CAD FILE TITLE QUICK CRIMP "N" PLUG FOR SOLID DIELECTRIC FOR (BELDEN 9913 & 9914) CABLES SCALE: 4.5:1.0 DWG SIZE B SHEET 2 OF 2 REV D Amphenol RF www.amphenolrf.com DRAWING NO. 82-340-1052 ITEM NO. 82-340-1052 PART NO. 82-340-1052