Dubox® PCB Receptacles
MODULAR, RELIABLE, AND
COMPACT SOLUTION
The Dubox® connector families offer an extensive range of
through-hole and surface-mount part options, including
single or double-row in either vertical or right angle
orientation from 2 to 50 positions per row, with a current
rating of 3A (maximum) per individual contact.
The Dubox® contact has a pre-stressed, dual beam design
to enable low insertion force, 4-wall contact design for
signal protection and supports up to 200 mating cycles
(plating dependent).
§ Uniform dual-beam design across the range
§ High-temperature material
§ Mezzanine and coplanar connectivity
§ Fully compatible with standard BergStik® headers
TARGET MARKETS
FEATURES
BENEFITS
§ Dual beam contact design
§ Highly reliable electrical performances
§ Pre-stressed contact
§ Low insertion force required
§ Mates with very short pins (5mm) and are stackable end-
§ Meets your specific needs and is useful for Mezzanine
to-end and side-by-side
application
§ Floating solder tails with self-centering on the circuit pads
§ Assures coplanarity
§ 4 wall contact design
§ Improved signal protection
§ Duplex plating
§ Cost efficient
§ Locating feature available
§ Maintains the alignment for soldering and facilitates robotic
placement
§ High temperature performing raw material
§ Compatible with Infra-Red and Vapor-Phase reflow
§ Compliant to DIN 41651 specifications, HE 13 and BT D2632
§ Qualifies industry specific standards
www.amphenol-icc.com
Dubox® PCB Receptacles
TECHNICAL INFORMATION
MATERIAL
SPECIFICATIONS
§
Housing: High temperature thermoplastic
§
Product Specification: BUS-12-055 (gold) / BUS-12-066 (tin)
§
Contact: Phosphor bronze
APPROVALS & CERTIFICATION
§
Plating: 0.76 µm (30µ”) Gold / GXT
over 1.27 µm (50µ”)
nickel or 2.0µm matte tin full plated
®
MECHANICAL PERFORMANCE
§
Contact Normal Force: 0.6N
§
Insertion Force per Gold Contact: 1.50N (150gf) max.
§
UL approval: E66906
PACKAGING
§
Polybags, tubes or reel
TARGET MARKETS/APPLICATIONS
§
Withdrawal Force per Gold Contact: 0.30N (30gf) min.
Personal Care Devices (Air Dryer)
Home Care Devices (Cleaning Robot)
Home Automation (Alarm System)
§
Contact Wiping Length: 1.5mm
§
200 Mating Cycles (gold plating)
Sever
Storage
ELECTRICAL PERFORMANCE
§
Current Rating: 3A continuous
Industrials (Robotics, PLC , Power tool)
2A DC max. per contact for fully energized connector
§
Insulation Resistance: 1 x 105 MΩ min.
§
Dielectric Withstanding Voltage: 1000Vrms min.
§
Contact Resistance: 15mΩ max. dielectric
20MΩ max. after environmental tests
ENVIRONMENTAL
§
Operating Temperature Range: -65°C to +125°C
PART NUMBERS
Description
Part Numbers
Receptacle, Vertical, Single Row, TMT, Top Entry
75915
Receptacle, Vertical, Double Row, TMT, Top Entry
87606
Receptacle, Vertical, Single Row, TMT, Dual Entry
77424
Receptacle, Vertical, Double Row, TMT, Dual Entry
89847
Receptacle, Vertical, Single Row, SMT, Dual Entry, Low Profile 7.00mm height
91601
Receptacle, Vertical, Double Row, SMT, Dual Entry, Low Profile 7.00mm height
89898
Receptacle, Right-Angle, Single Row, TMT
89882
Receptacle, Right-Angle, Double Row, TMT
89883
Receptacle, Right-Angle, Single Row, SMT
71607
Receptacle, Right-Angle, Double Row, SMT
71609
www.amphenol-icc.com
Disclaimer
Please note that the above information is subject to change without notice.
Dubox® PCB Receptacles
PART NUMBER SELECTOR PCB RECEPTACLE
76341
Y
BASE PART NUMBER
Plating Option
3
0.76µm GXT on contact area
4
2µm tin on contact area
Other plating options available upon request
75915
XX
LF
Lead-free compatibility
Packaging Option
-
Polybag or Tube according to
availabilities
A
Tape & reel with pick up cap
according to availabilities
Number of positions per row
87606
www.amphenol-icc.com
77424
Disclaimer
Please note that the above information is subject to change without notice.
BASICSDUBOXBTB0122EA4
Dubox® PCB Receptacles
www.amphenol-icc.com
Disclaimer
Please note that the above information is subject to change without notice.
