901-10604

NOTES: 1. MATERIAL AND FINISH BODY; SHELL CONTACT PIN INSULATOR INSULATOR DISC RETAINER RING GASKET FERRULE HEAT SHRINK TUBING 2. ELECTRICAL: A. IMPEDANCE:50 OHM B. FREQUENCY RANGE: 0-12.4 GHz C. VSWR (RETURN LOSS): 1.10 (-26dB) DC-6 GHz 1.20 (-20dB) 6-12.4 GHz D. DIELECTRIC WITHSTANDING VOLTAGE:500 VRMS. MIN. 3. MECHANICAL: A. DURABILITY:500 CYCLES MIN. B. TEMPERATURE RANGE:-65 $ C TO +165 $ C 4. REVISIONS THIRD ANGLE PROJ. (PLATING THICKNESS IN MICRO-INCHES): - BRASS, NICKEL PLATING - BRASS, GOLD PLATING - PTFE, NATURAL - ULTEM, NATURAL - SUS 304, NATURAL - SILICONE RUBBER, RED - COPPER, NICKEL PLATING - POLYOLEFIN, BLACK REV DESCRIPTION A DATE RELEASE TO MANUFACTURING ECO 07-May-19 11442 APPR CJV 12 JACKET 4.2 INNER CONDUCTOR DIELECTRIC, OUTER CONDUCTOR & OVERALL BRAID RECOMMENDED CABLE STRIPPING DIM'S SCALE CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN, TAKING CARE TO NOT DAMAGE THE FOIL. B. SLIDE INSULATOR DISC, FERRULE AND HEAT SHRINK TUBE ONTO CABLE C. SOLDER CONTACT TO CABLE CENTER CONDUCTOR D. INSERT CABLE AND CONTACT INTO CONNECTOR. FOIL IS A SLIP FIT INTO n 1.75 BODY DIAMETER E. CRIMP FERRULE WITH .128 HEX 3.000 8 HEX 5 . CABLE ENTRY DIMENSIONS CONTACT PIN 2.3 REF INSULATOR 0.92 REF 1.62 REF 0.6 5 5 FERRULE 0.46 5 1.75 INTERFACE: SMA PLUG 3 7.9 REF. 1.9 REF 5 7 REF 8.4 REF 5 15.32 REF 4 HEAT SHRINK TUBING CUSTOMER OUTLINE DRAWING 19.3 REF ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: