901-10605

NOTES: 1. 2. 3. 4. 5. 6 REVISIONS THIRD ANGLE PROJ. REV MATERIALS AND FINISHES: BODY - BRASS, NICKEL PLATING CONTACT - BeCu, GOLD PLATING INSULATOR - PTFE, NATURAL INSULATOR DISC - ULTEM, NATURAL FERRULE - COPPER, NICKEL PLATING HEAT SHRINK TUBE - POLYOEFIN, BLACK DESCRIPTION A 12.00 DIELECTRIC FOIL BRAID ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC - 12.4 GHz C. VSWR : 1.10 MAX. DC - 6 GHz 1.20 MAX. 6 - 12.4 GHz D. DIELECTRIC WITHSTANDING VOLTAGE: 500 VRMS, MIN. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 901-10605, AND DATE CODE" CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN, TAKING CARE TO NOT DAMAGE THE FOIL. B. SLIDE INSULATOR DISC, FERRULE AND HEAT SHRINK TUBE ONTO CABLE C. SOLDER CONTACT TO CABLE CENTER CONDUCTOR D. INSERT CABLE AND CONTACT INTO CONNECTOR. FOIL IS A SLIP FIT INTO n 1.75 BODY DIAMETER E. CRIMP FERRULE WITH .128 HEX DATE RELEASE TO MANUFACTURING ECO 07-May-19 11442 3.00 3.80 REF APPR CJV JACKET 4.10 CONTACT RECOMMENDED CABLE STRIPPING DIMENSIONS 2.30 REF. SCALE 1.27 REF. 1.75 SHOWS CABLE ENTRY DIMENSIONS. 6 6 4.000 1.62 REF. 6 0.46 0.60 6 INTERFACE PER MIL-STD-348 SERIES:SMA JACK FERRULE INSULATOR DISC CONTACT PIN 1/4-36UNS-2A 1/4" HEX. HEAT SHRINK TUBE 4.00 REF. 4.60 REF. 6 SECTION A-A CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: