901-10662

NOTES: 1. MATERIALS AND FINISHES: BODY, HEX NUT & LOCKWASHER - BRASS, NICKEL PLATING INSULATOR & INSULATOR DISC - PTFE, NATURAL CONTACT - BeCu, GOLD PLATING GASKET - SILICONE RUBBER, RED FERRULE - COPPER, NICKLE PLATING HEAT SHRINK TUBING - CROSSLINKED POLYOLEFIN, BLACK O-RING - FLUORO SILICONE RUBBER, BLACK 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC - 8 GHz C. VSWR: 1.20 MAX. 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL RF, 901-10662 AND DATE CODE" 5. CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. SLIDE HEAT SHRINK TUBING, FERRULE AND INSULATOR DISC ONTO CABLE. C. SOLDER CABLE CENTER CONDUCTOR TO CONTACT. D. INSERT CABLE, UNTIL IT BOTTOMS, WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL. E. CRIMP FERRULE OVER BRAID WITH 0.213" HEX DIE. F. APPLY HEAT SHRINK TUBING OVER FERRULE. G. HEAT SHRINK TUBING SHOULD FULLY (360 $ ) COVER THE BUMP ON BODY AND END WITHIN AREA "A". REV DESCRIPTION A 6 ADHESIVE LINED HEAT SHRINK TUBE (ITEM 10) IS INCLUDED (NOT SHOWN). 7. SHOWS CABLE ENTRY DIMENSIONS 1,90 [0.075 ] DIELECTRIC & FOIL 13304 RECOMMENDED CABLE STRIPPING DIMENSIONS 7 INTERFACE PER MIL-STD-348 SERIES: SMA JACK 1.500 7,90 [ 0.311 ] BRAID 7 3,25 [0.128 ] VR 0,20 x45 $ [0.008 ] RECOMMENDED MOUNTING HOLE DIMENSIONS 7 APPR 3,30 [0.130 ] CENTER CONDUCTOR 26,45 REF [1.041 ] AREA "A" 1.50 MAX. [0.059] FROM BODY TO HST ECN 17-Oct-19 SCALE 6,50 [0.256 ] 11,40 REF [0.449 ] DATE RELEASE TO MFG. 6,00 [0.236 ] 3,20 REF [0.126 ] MAX. PANEL THICKNESS REVISIONS THIRD ANGLE PROJ. 4. 7 1,20 [0.047 ] 5,33 [0.210 ] 1,18 [0.046 ] CONTACT 4,60 REF [ 0.181 ] TYP(2) 1/4-36UNS-2A THREAD 5.85 [0.230] 'D' FLAT 8.00 MM WRENCH LOCK WASHER INSULATOR DISC FERRULE O-RING 11.00 MM WRENCH CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: