901-148-15

NOTES: 1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES): BODY ASSEMBLY - BRASS, GOLD PLATING (50 MIN THICK) CAP - BRASS, GOLD PLATING (50 MIN THICK) LOOSE CONTACT - BeCu, GOLD PLATING (50 MIN THICK) & ASSEMBLED CONTACT GASKET - SILICONE RUBBER RETAINGING RING - BeCu COUPLING NUT - BeCu, GOLD PLATING (50 MIN THICK) OUTER FERRULE - COPPER, GOLD PLATING (50 MIN THICK) HEAT SHRINK TUBING - POLYOLEFIN ASSEMBLED CONTACT - BRASS, GOLD PLATING (50 MIN THICK) INSULATORS - PTFE ELECTRICAL: A. IMPEDANCE: 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $C TO +165 $C 4. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, 901-148-15 , AND DATE CODE" DESCRIPTION DATE ECO -- OFFICIAL ENG. RELEASE TO MFG. ------ ------ AB ADDED VIEW FOR WIRE HOLES 3/19/14 49912 AA REDRAWN IN PRO E & ADDED COD 9/20/13 49679 APPR KR CPM 0.530 REF 0.390 #0.010 50 OHM 5. CABLE ASSEMBLY INSTRUCTIONS A. TRIM CABLE AS SHOWN. B. SOLDER CABLE CENTER CONDUCTOR TO C. INSERT CABLE WITH PTFE INSULATOR AND BRAID OVER KNURL. D. CRIMP FERRULE WITH AMPHENOL TOOL DIE SET 227-1221-57 CLOSURE 'A', USE M22520/1-15 POSITIONER. 6. REV 0.140 #0.010 2. REVISIONS THIRD ANGLE PROJ. 0.281 #0.010 SCALE 2.500 MIL-C-39012 INSPECTION RECOMMENDED CABLE STRIPPING DIMENSIONS CONTACT. ENTERING CONNECTOR 227-944 AND .213" HEX DIE. SHOWS CABLE ENTRY DIMENSIONS. 0.041 0.669 REF. 0.122 1.081 REF. 0.327 REF. 0.220 RED 0.738 REF MAROON HEAT SHRINK TUBING LOOSE CONTACT 0.375 REF OUTER FERRULE INSULATOR (PTFE) .016 MIN 3 SAFETY WIRE HOLES 5/16" HEX INTERFACE PER MIL-STD-348 SMA SERIES THIS CONNECTOR IS COVERED BY U.S. PATENT 3,439,294. UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES #.015 (0,381 mm) #.005 (0,127 mm) # 1$ NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE DOR 312191-51 M39012/56-4502 FINISH DRAWN KARTHIK R DATE 12-Aug-13 ENGINEER ABR DATE 09-Jul-80 APPROVED K. CAPOZZI DATE 9/20/13 CAD FILE TITLE Amphenol RF SMA 90 $PLUG CRIMP www.amphenolrf.com TYPE FOR RG-400/U & 142/U CABLE DRAWING NO. 901-148-15 SCALE: 5.0:1.0 DWG SIZE B SHEET 2 OF 2 REV AB ITEM NO. 901-148-15 PART NO. 901-148-15