901-255-11

Amphenol® Assembly Instructions-C55 SMA CRIMP-CRIMP TYPES FOR FLEXIBLE CABLE ferrule heat shrink tubing Connector Type Stripping Dimensions, inches (mm) Cable RG-/U a b c body assembly Contact Data Outer Ferrule Data Positioner for Positioner for Hex Cav. for Die Set for Tool 227-1454 M22520/1-01 Outer ferrule Tool 227-944 901-101-15* SMA Plug 142B, 400 .531(13.5) .250(3.2) .141(3.6) /1-15 .213(5.4) 227-1221-11 Cav. A CTL-1 901-9511-1SFC SMA Plug 55, 58, 141, 142, 223, 400 .300(7.6) — .090(2.3) 227-1451-1 — .213(5.4) 227-1221-11 Cav. A CTL-1 901-9511-3* SMA Plug 174, 179B, .470(11.9) .170(4.3) .120(3.0) 227-1451-1 — .128(3.3) 227-1221-03 CTL-13;9 901-9511-3SF* SMA Plug 187A, 316 .470(11.9) .170(4.3) .120(3.0) 227-1451-1 — .128(3.3) 227-1221-03 CTL-13;9 901-9511-3SFC SMA Plug 174, 179, 187 188, 316 .470(11.9) .170(4.3) .120(3.0) 227-1451-1 — .128(3.3) 227-1221-03 CTL-13;9 901-9511-12SF* SMA Plug Dbl. Br. 316 .470(11.9) .170(4.3) .120(3.0) 227-1451-1 — .151(3.8) 227-1221-37 Cav. B CTL-13;9 901-9511-12SFC SMA Plug Dbl. Br. 316 .470(11.9) .170(4.3) .120(3.0) 227-1451-1 — .151(3.8) 227-1221-37 Cav. B CTL-13;9 Step 1 a b . c Step 2 contact bottoms here — CTL Series Tool Step 1 Slide heat shrink tubing and outer ferrule onto cable. Strip cable jacket, braid and dielectric to dimensions shown in table above. All cuts are to be sharp and square. Do not nick braid, dielectric or center conductor when cutting. Flare end of cable braid slightly as shown to facilitate insertion of inner ferrule. Do not comb out braid. Step 2 For crimp contact type only: Crimp center contact to cable conductor using 8-indent Tool and Positioner shown in Table above. Note: Contact must bottom against cable dielectric. *For solder type connectors: Solder contact to center conductor. contact crimp area Step 3 Step 3 Install inner ferrule of body assembly over cable dielectric and under braid. Place outer ferrule against body and crimp with tool 227-944 (M22520/5-01) and die set shown in table above. Place heat shrink tubing over crimp ferrule, against body, and apply heat. outer ferrule butts here Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 323 Assembly Amphenol Number center contact Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: 901-255-11