Description
SMA is an acronym for SubMinature version A and
was developed in the 1960’s. It uses a threaded
interface.
50 ohm SMA connectors are semi-precision, subminiature units which provide excellent electrical
performance from DC to 18 Ghz. These high performance connectors are compact in size and
mechanically have outstanding durability.
Built in accordance with MIL-C-39012 and CECC
22110/111. They can be mated with all connectors
which meet these spec mating diameters regardless
of manufacturer.
Stainless Steel
Features/Benefits
Specifications
Plugs
Jacks
Receptacles
In-Series Adapters
• Broadband performance DC to 18 GHz with low
reflection stainless steel construction with 1/436 threaded coupling offers high performance
in a compact design.
• Low cost Commercial Grade (Brass SMA)
available in nickel or gold plating, flexible
provides approximately 30% reduction in cost
with 250 mating cycles.
56-57
58-61
62-63
64-73
74-75
Brass
Specifications
Plugs, Jacks
Receptacles
• Various flexible cable groups including: .086
and .141 semi-rigid allows customer flexibility
in their design with a durable connector.
76
77-78
79-82
Phase Adjustable
Connectors
Application
• Base Stations
• Mil/Aero
• Cable Assemblies
• PC/LAN
• Components
• Process Controls
• Instrumentation
• Telecom
Specifications
Plugs and Adapters
Amphenol Corporation Tel: 800-627-7100
83
84
www.amphenolrf.com
55
SMA
Amphenol®
SMA
Amphenol®
SMA
Specifications
ELECTRICAL
ENVIRONMENTAL
Impedance
50 ohms
Temperature range
-65°C to + 165°C
Frequency range
.141" & .085" O.D.
copper jacket semirigid cable. 0-18GHz.
Thermal shock
MIL-Std. 202 method
107 (test cond. B)
except high temp test
@ + 200°C
Voltage rating
Flexible cables:
0-12.4 GHz.
Vibration
RG-55, 58,141,142, 223,
303: 500 volts peak
MIL-Std. 202 method
204 (test cond. D)
Shock
MIL-Std. 202 method
213 (test cond. I)
No discontinuity
permitted.
Corrosion
MIL-Std. 202 method
101 (test cond. B)
5% salt solution.
Moisture resistance
MIL-Std. 202 method
106, except step 7b
(vibration) omitted,
and high humidity
measurements do not
apply.
RG-122,, 174, 188, 316:,
375 volts peak
Dielectric
withstanding voltage
.141" & RG-58 group:
1,000 VRMS.
.085" & RG-316 group:
750 VRMS.
VSWR
(straight connectors)
.141" O.D. copper
jacket cable:
1.05 + .005 f (GHz)
RG-55 group:
1.15 + .011 f (GHz)
RG-122 group:
1.15 + .02 f (GHz)
Weatherproofing
(angle connectors)
.141" O.D. copper
jacket cable:
1.10 + .01 f (GHz)
Altitude
MIL-Std. 202 method
105 (test cond. C), no
corona at 70,000 ft.
RG-55 group:
1.15 + .02 f (GHz)
.141" & RG-55 group:
250 VRMS.
RG-122 group:
1.15 + .03 f (GHz)
.085" & RG-122 group:
190 VRMS.
RG-178 group:
1.20 + .03 f (GHz)
Contact resistance
Center: 2.0 milliohms
Insulation resistance:
RF leakage
Insertion loss:
5000 megohms
-60 dB
Contacts
Beryllium copper per
QQ-C-530, heat treated
per MIL-H-7199.
Plating:
Center contacts.
.00005" min. gold per
MIL-G-45204, type 1,
grade C. Gold over
nickel unless otherwise
requested.
Plating:
Other metal parts
Gold plated or
passivated to meet the
finish and corrosion
requirements of MIL-C39012.
Insulators
TFE fluorocarbon per
ASTM D1457.
Gaskets
Silicone rubber, per
MIL-R-5847 and ZZ-R765. class IIB, grade
65-75.
Lockwashers
Stainless steel, internaltooth supplied with all
bulkhead mounted
connectors.
Crimp ferrules
Seamless copper tubing
alloy # 122 (DHP), hard
drawn to Rockwell 58-77
on 30-T scale per
ASTM B75.
MILITARY SPECIFICATIONS
MECHANICAL
Body: 2.0 milliohms
Braid to body: 0.5
milliohms
Bodies, coupling nuts, Non-magnetic stainless
other metal parts
steel per QQ-S-764,
(except as noted)
Type 303.
Crimp type: heat
shrink tubing
Solder type: silicone
rubber gaskets
RG-178 group:
1.20 + .025 f (GHz)
MATERIAL
Mating
.250-36 threaded
coupling
Mating torque
Minimum:
2 inch pounds
22 N.cm
minimum
.03 √ f(GHz) dB max.
MIL-C-39012 &
MIL-C-83517 SMA
specification sheets
As applicable
Recommended:
7 to 10 inch pounds
80-110 N.cm
Maximum:
15 inch pounds
170 N.cm
Coupling nut
retention
Axial force:
100 lbs. min., 300 N.cm
Torque: 15 in. lbs. min.
76 N.cm
Jacks: N/A
Connector affixment
to cable
Crimp types,
solder types
Cable affixment to
center contact
Solder, except as
noted
Contact captivation
All types, except
as noted
Cable retention
Crimp type for RG-58,
.141, 303=60 lbs min.;
for RG-55,142, 223 =
80 lbs min. 400 N.cm
Connector durability
500 mating and
unmating cycles @
12 cycles per min.
Amphenol Corporation Tel: 800-627-7100
NOTE: These characteristics are typical and may
not apply to all connectors.
www.amphenolrf.com
56
Plug
SMA
Amphenol®
SMA
Jack
2.56/3.63
.135 MAX
.218 MIN
.130 MIN
.170 MIN
FULL THD
.015/.045
.074/.078
.015/.045
6.35/6.73
ø.250 MIN
ø.051/.049
6.53/6.59
ø.1808 MAX
CONTACT
ø .216
.208
ø.1810 MIN
.250-36UNS-2B
.115
.250-36UNS-2A
.000/.010
.010 MAX
.000 MIN
RECESS
SMA PLUG
.1.91/2.56
100 MAX
.015 MAX
SMA JACK
.000 MAX
PROJECTION
REF PLANE
ø 0.90
ø 0.96
.015 MIN
.050 MIN
.000 MAX
PROJECTION
CECC = Cenelec Electronic Components
Committee in Europe
SMA
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
57
Amphenol®
SMA
Straight Cable Plugs
Fig. 1
Fig. 2
VSWR = 1.35 max.
DC-22GHz
a
.330(8.4)
c
a
.312(7.92) hex.
.330(8.4)
coupling nut for
901-9723 is
.280(7.1) long.
SMA Plugs - Solder to Body
901-9201-2A
for .085" (2.2mm) S/R, RG-405 (M17/133)
Gold Plated Nut [VSWR = 1.07 + .008(GHz) DC-18GHz]
901-9201-2ASF
for .085" (2.2mm) S/R, RG-405 (M17/130)
Gold Plated Passivated Nut
901-9201-1A
for .141" (3.6mm) S/R, RG-402 (M17/130)
Gold Plated Nut, without Contact & Insulator
901-9201-1ASF
for .141" (3.6mm) S/R, RG-402 (M17/130)
Gold Plated Passivated Nut
c
retaining "c" ring
for 901-9723 only
.312
(7.92)
hex.
SMA Plugs - Solder to Body/
Pre-assembled Factory-Set Interface
901-9723 ▲
Passivated Nut, 100 piece Bulk Pack
901-9723-10
Passivated Nut, Single Pack
for .085" (2.2mm) S/R, RG-405 (M17/133)
Fig. 3
Fig. 4
VSWR = 1.35 max.
DC-22GHz
a
.330(8.4)
.050(1.27)
reference plane
c
.202(.513)
.312
(7.92)
hex.
c
a
.312(7.9) hex nut
901-9808 ▲
Gold Body, Passivated Nut
901-9808-1
Gold Body and Nut
901-9808-2
Gold Body, Passivated Nut
Preassembled Factory Set Interface
Single Pack
for .141" (3.6mm) S/R , RG-402 (M17/130)
SMA Plugs - Solder to Body/
Pre-assembled Factory-Set Interface
901-9805-HP
Passivated Nut, Single Pack
for .085" (2.2mm) S/R, RG-405 (M17/133)
SMA PLUGS FOR SEMI-RIGID CABLE – 50Ω impedance
Cable
RG-/U
.085" (2.2mm) Semi-Rigid
RG-405 (M17/133)
.141" (3.6mm) Semi-Rigid
RG-402 (M17/130)
▲ distributor stocked
Cable Attachment
Outer
Inner
Dim. In. (mm)
a
c
CAI
Plt. Ins.
Construction
Notes
Amphenol
Number
Fig.
Solder
Solder
.438(11.1)
.090(2.3)
C47 P10 D1
—
901-9201-2A
1
Solder
Plugable
.400(10.2)
.090(2.3)
C48 P10 D1
—
901-9201-2ASF
1
▲
Solder
Plugable
.400(10.2)
.090(2.3)
C48 P10 D1
—
901-9723
2
Solder
Plugable
.400(10.2)
.090(2.3)
C48 P11 D1
—
901-9723-10
2
Solder
Plugable
.531(13.5)
.090(2.3)
C48 P11 D1
—
901-9805-HP
4
Solder
None
.445(11.3)
.145(3.7)
C50 P14
901-9201-1A
1
Solder
None
.445(11.3)
.145(3.7)
C50 P14
Solder
Plugable
.438(11.1)
.145(3.7)
Solder
Plugable
.438(11.1)
.145(3.7)
Solder
Plugable
.438(11.1)
.145(3.7)
—
w/o Cont. & Ins.
— Gold plated body❦
C48 P10 D1 Gold plated body❦
C48 P10 D1 Gold plated body❦
C48 P10 D1 Gold plated body❦
▲ 901-9201-1ASF
1
901-9808
3
901-9808-1
3
901-9808-2
3
❦ passivated nut
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
58
Fig. 1
Fig. 2
SMA
Amphenol®
SMA
Straight Cable Plugs
Fig. 3
1.50(38.1)
a
a
.725(18.4)
a
.330
(8.4)
.330
(8.4)
.312(7.92) hex.
c
c
c
.312
(7.92)
hex.
heat shrink tubing
.250(6.4) hex.
SMA Plugs
Braid Crimp/
Captivated Solder Contact
901-9601-1SF▲
Passivated Body & Nut
for RG-55B, 142B, 223, 400
901-9601-3 ▲
Gold Plt. Body & Nut
901-9601-3SF▲
Passivated Body & Nut
for RG-174, 179, 187, 188, 316
SMA Plugs
BeCu Body, Solder to Nut
901-103 •▲
for RG-55, 58, 142, 223
901-128-11 •
(M39012/55-4007)
for RG-174, 316
SMA Plug
Braid Solder to Body
Captivated Solder Contact
901-9501-3
for RG-174, 179B, 187A, 188A, 316
heat shrink tubing
.312(7.92) hex.
SMA PLUGS FOR FLEXIBLE CABLE – 50Ω impedance
Cable
RG-/U
Cable Attachment
Outer
Inner
a
Dim. In. (mm)
c
CAI
Plt.
Ins.
Construction
Notes
Mil. No.
39012/
Amphenol
Number
Fig.
Clamp
Solder
.969(24.6)
.219(5.6)
C43 P9
D1
BeCu Body
—
•▲ 901-103
2
55B, 142B, 223, 400
Crimp
Solder
1.10(28.0)
.220(5.6)
C56 P12
D1
Captivated Contact
—
▲ 901-9601-1SF
3
174, 179, 187, 188, 316
Crimp
Solder
1.10(28.0)
.128(3.3)
C56 P9
D1
Captivated Contact
—
▲ 901-9601-3
3
Crimp
Solder
1.10(28.0)
.128(3.3)
C56 P12
D1
Captivated Contact
—
▲ 901-9601-3SF
3
174, 179B, 187A, 188A, 316
Solder
Solder
.690(17.5)
.128(3.3)
C46 P11
D1
—
901-9501-3
1
174, 316
Clamp
Solder
.984(25.0)
.114(2.9)
C44 P9
D1
901-128-11
2
—
BeCu Body
55-4007
•
• safety wire holes ▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
59
SMA
55, 58, 141, 142, 223
Amphenol®
SMA
Straight Cable Plugs
Fig. 1
Fig. 2
1.10(27.9)
a
.330
(8.4)
c
heat shrink tubing
.312(7.92) hex.
SMA Plugs
Braid Crimp/
Non-Captivated Solder Contact
901-9511-1▲
Gold Plt. Body & Nut
901-9511-1SF▲
Passivated Body & Nut
for RG-55B, 142B, 223, 400
901-9511-3 ▲
Gold Plt. Body & Nut
901-9511-3SF▲
Passivated Body & Nut
for RG-174, 179, 187, 188, 316
901-9511-12SF▲
Passivated Body & Nut
for Double Braid RG-316
901-9511-2
Gold Plt. Body & Nut
901-9511-2SF
Passivated Body & Nut
for RG-58
901-10011
Passivated Body & Nut
for LMR 240
901-10012
Passivated Body & Nut
for LMR 200
1.10(27.9)
a
.330
(8.4)
c
.312(7.92) hex.
heat shrink tubing
SMA Plugs
Braid Crimp/
Crimp Center Contact
with Passivated Body & Nut
901-9511-1SFC
for RG-55B, 142B, 223, 400
901-101-15•†
BeCU Body
(M39012/55-4502)
for RG-142B, 400
901-9511-3SFC
for RG-174, 179, 187, 188, 316
901-9511-12SFC
for Double Braid RG-316
SMA PLUGS FOR FLEXIBLE CABLE – 50Ω impedance
Cable
RG-/U
55B, 142B, 223, 400
Cable Attachment
Outer
Inner
Crimp
Solder
Dim. In. (mm)
a
c
.812(20.6)
.220(5.6)
D1
Construction
Notes
Non-Captive Contact
Mil. No.
39012/
—
C53 P10
55B, 142B, 223, 400
Crimp
Solder
.812(20.6)
.220(5.6)
C53 P13
D1
Non-Captive Contact
—
▲ 901-9511-1SF
58
Crimp
Solder
.812(20.6)
1
.206(5.2)
C53 P11
D1
—
—
901-9511-2
58
Crimp
Solder
1
.812(20.6)
.206(5.2)
C53 P10
D1
—
—
901-9511-2SF
174, 187, 188, 316
Crimp
1
Solder
.812(20.6)
.128(3.3)
C55 P10
D1
Non-Captive Contact
—
▲ 901-9511-3
174, 187, 188, 316
1
Crimp
Solder
.812(20.6)
.128(3.3)
C55 P13
D1
Non-Captive Contact
—
▲ 901-9511-3SF
Dbl. Braid RG-188, 316
1
Crimp
Solder
.812((20.6)
.142(3.6)
C55 P13
D1
Non-Captive Contact
—
▲ 901-9511-12SF 1
CAI
Plt.
Ins.
Amphenol
Number
▲ 901-9511-1
Fig.
1
LMR 240
Crimp
Solder
1.03(26.2)
.261(6.6)
C53 P13
D1
Non-Captive Contact
—
901-10011
1
LMR 200
Crimp
Solder
.810(20.6)
.206(5.2)
C53 P13
D1
Non-Captive Contact
—
901-10012
1
55B, 142B, 223, 400
Crimp
Crimp
.812(20.6)
.220(5.6)
C55 P13
D1
—
—
901-9511-1SFC 2
142B, 400
Crimp
Crimp
1.03(26.2)
.220(5.6)
C55 P9
D1
BeCu Body
174, 179, 187, 188, 316
Crimp
Crimp
.812(20.6)
.128(3.5)
C55 P13
D1
—
—
901-9511-3SFC 2
Dbl. Braid RG-188, 316
Crimp
Crimp
.812(20.6)
.142(3.6)
C55 P13
D1
—
—
901-9511-12SFC 2
• safety wire holes † for crimping center contact, use Tool Handle M22520/1-01 and Crimp Die M22520/1-15
Amphenol Corporation Tel: 800-627-7100
55-4502
•† 901-101-15
2
▲ distributor stocked
www.amphenolrf.com
60
Fig. 1
Fig. 2
Fig. 3
a
.538
(13.7)
a
a
.538
(13.7)
.330(8.4)
e
.312(7.92)
hex.
e
d
.330(8.4)
•c dia.
.930 d
(23.6).
e
heat shrink
tubing
d
heat shrink
tubing
•c dia.
•c dia.
SMA Angle Plugs Solder to Nut
901-9531-1 ▲
Gold Plt. Body & Nut
for RG-55, 142, 223, 400
901-9531-2
Gold Plt. Body & Nut
901-9531-2SF
Passivated Body for RG-58, 141
901-9531-1SF▲
Passivated Body for SF142B
901-9531-3 ▲
Gold Plt. Body & Nut
901-9531-3SF▲
Passivated Body
for RG-174, 179, 187,188, 316
901-9531-12 ▲
Gold Plt. Body & Nut
901-9531-12SF▲
Passivated Body for Double Braid RG-316
901-10014
Passivated Body & Nut for LMR240
SMA Angle Plugs
Solder to Body
901-9221-2A
Gold Plated Nut
901-9221-2ASF
Passivated Nut
for 085" (2.2mm) S/R
RG-405 (M17/133)
901-9221-1A
Gold Plated Nut
901-9221-1ASF
Passivated Nut
for 141" (3.6mm) S/R
RG-402 (M17/130)
SMA
Amphenol®
SMA
Right Angle Cable Plugs
SMA Angle Plugs
Braid Solder,
Solder Contact
901-9521-3 ▲
for RG-174, 179, 187,
187A, 188, 188A, 316
SMA RIGHT ANGLE PLUGS FOR SEMI-RIGID & FLEXIBLE CABLE – 50Ω impedance
Cable
RG-/U
Cable Attachment
Outer
Inner
a
c
Dim. In. (mm)
d
e
CAI
Plt. Ins.
Notes
Mil. No.
39012/
Amphenol
Number
Fig.
1
.085" (2.2mm) Semi-Rigid
RG-405 (M17/133)
Solder
Solder
.680(17.3)
.090(2.3)
.430(10.9)
.305(7.7)
C49
P11 D1
—
—
901-9221-2A
Solder
Solder
.680(17.3)
.090(2.3)
.430(10.9)
.305(7.7)
C49
P11 D1
—
—
901-9221-2ASF 1
.141" (2.2mm) Semi-Rigid
RG-402 (M17/130)
Solder
Solder
.680(17.3)
.145(3.7)
.430(10.9)
.305(7.7)
C49
P11 D1
—
—
901-9221-1A
Solder
Solder
.680(17.3)
.145(3.7)
.430(10.9)
.305(7.7)
C49
P11 D1
—
—
901-9221-1ASF 1
1
Crimp
Solder
.682(17.3)
.220(5.6)
1.05(26.7)
.550(14.0) C53
P11 D1 Cap. Cont.
—
▲ 901-9531-1
2
58, 141
Crimp
Solder
.682(17.3)
.206(5.2)
1.05(26.7)
.550(14.0) C53
P11 D1
—
901-9531-2
2
Crimp
Solder
.682(17.3)
.206(5.2)
1.05(26.7)
.550(14.0) C53
P13 D1
—
901-9531-2SF
2
Crimp
Solder
.682(17.3)
.128(3.3)
1.05(26.7)
.550(14.0) C57
P11 D1 Cap. Cont.
—
▲ 901-9531-3
2
Crimp
Solder
.682(17.3)
.128(3.3)
1.05(26.7)
.550(14.0) C57
P13 D1 Cap. Cont.
—
▲ 901-9531-3SF
2
174, 179, 187, 187A,
188, 188A, 316
Solder
Solder
.675(17.1)
.128(3.3)
1.12(28.4)
.440(11.2) C46
P11 D1
—
—
▲ 901-9521-3
3
SF 142B, Times AA-2423
Crimp
Solder
.675(17.1)
.219(5.6)
1.06(26.9)
.475(12.1) C53
P13 D1
—
—
▲ 901-9531-1SF
2
Double Braid RG-316
Crimp
Solder
.682(17.3)
.142(3.6)
1.05(26.7)
.550(14.0) C57
P11 D1 Cap. Cont.
—
▲ 901-9531-12
2
Crimp
Solder
.682(17.3)
.142(3.6)
1.05(26.7)
.550(14.0) C57
P13 D1 Cap. Cont.
—
▲ 901-9531-12SF 2
Crimp
Solder
.682(17.3)
.261(1.7)
1.00(25.4)
.685(17.4) C57
P13 D1
—
174, 187, 188, 316
LMR 240
—
901-10014
2
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
61
SMA
55, 141, 142, 223, 400
Amphenol®
SMA
Stainless Steel Cable Jacks
Fig. 1
Fig. 2
Fig. 3
1.37(34.8)
a
a
.320
(2.1)
a
c
c dia.
c
.250(6.4) hex.
.312(7.92) hex.
.250(6.4) hex.
SMA Jacks
Solder to Body
Solder Center Contact
901-9202-1A
for .141" (3.6mm)
S/R RG-402 (M17/130)
901-9202-2A
for .085" (2.2mm)
S/R RG-405 (M17/133)
heat shrink tubing
.250(6.4) hex.
SMA Jacks
Braid Crimp
Solder Captive Contact
901-9602-1
Gold Plated,
901-9602-1SF
Passivated
for RG-55B, 142B, 223, 400
901-9602-3
Gold Plated,
901-9602-3SF
Passivated
for RG-174, 179, 187, 188, 316
901-9602-12SF
Passivated for
Double Braid RG-316
SMA Jack
Solder to Body
Pre-assembled Center Contact
901-9704
Gold Plated for .141" (3.6mm)
S/R RG-402 (M17/130)
SMA JACKS FOR SEMI-RIGID & FLEXIBLE CABLES – 50Ω Impedance
Cable
RG-/U
Cable Attachment
Outer
Inner
Dimensions In. (mm)
a
c
CAI
Plt.
Ins.
Notes
Amphenol
Number
Fig.
.085" (3.6mm) Semi -Rigid
(RG-405) (M17/133)
Solder to Body
Solder
.500(12.7)
.088(2.2)
C47
P9
D1
—
901-9202-2A
1
.141" (3.6mm) Semi -Rigid
RG-402 (M17/130)
Solder to Body
Solder
.500(12.7)
.144(3.7)
C47
P10
D1
—
901-9202-1A
1
Solder to Body
Solder
.500(12.7)
.144(3.7)
C59
P11
D1
Pre-assembled Cont.
901-9704
2
55, 142, 223, 400
Crimp
Solder
.965(24.5)
.220(5.6)
C56
P9
D1
Captive Contact
901-9602-1
3
Crimp
Solder
.965(24.5)
.220(5.6)
C56
P12
D1
Captive Contact
901-9602-1SF
3
174, 179, 187, 188, 316
Crimp
Solder
.965(24.5)
.128(3.3)
C56
P9
D1
Captive Contact
901-9602-3
3
Crimp
Solder
.965(24.5)
.128(3.3)
C56
P12
D1
Captive Contact
901-9602-3SF
3
Double Braid RG-316
Crimp
Solder
.965(24.5)
.142(3.6)
C56
P12
D1
Captive Contact
901-9602-12SF
3
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
62
Fig. 1
Fig. 2
SMA
Amphenol®
SMA
Stainless Steel Cable Jacks
Fig. 3
a
a
1.09(27.8)
.415
(10.5)
.093
(2.4)
max.
panel
.450
(11.4)
.230(5.8)
across
one flat
.125(3.18)
max.panel
c dia.
.230(5.8)
across
one flat
c dia.
heat shrink tubing
.312
(7.92)
hex.
.375
(9.5)
hex.
.260(6.6)
.437(11.1) hex.
gasket
.260(6.6)
.235
(6.0)
.235
(6.0)
.235
(6.0)
SMA Bulkhead Jacks
Braid Crimp Captive Contact
Solder Center Contact
901-9610-1SF▲
Passivated
for RG-55B, 142B, 223, 400
901-9610-3 ▲
Gold Plated
901-9610-3SF▲
Passivated
for RG174, 179, 187,188, 316
901-9610-12SF
Passivated
for Double Braid RG-316
901-10015
Passivated
for LMR 240
.260
(6.60)
SMA Bulkhead Jacks
Solder to Body
Solder Center Contact
Gold Plated
901-9210-1
for .141" (3.6mm)
S/R RG-402 (M17/130)
901-9210-2
for .085" (2.2mm)
S/R RG-405 (M17/133)
SMA Bulkhead Jacks
Braid Crimp
Solder Center Contact
901-10021-1SF▲
Passivated
for RG-55B, 142B, 223, 400
901-10021-3SF▲
Passivated
for RG174, 179, 187,188, 316
901-10021-12SF
Passivated
for Double Braid RG-316
SMA BULKHEAD JACKS FOR SEMI-RIGID & FLEXIBLE CABLES – 50Ω Impedance
Cable
RG-/U
Cable Attachment
Outer
Inner
Dimensions In. (mm)
a
c
CAI
Plt.
Ins.
Notes
Amphenol
Number
Fig.
.085" (2.2mm) Semi-Rigid
Solder to Body
RG-405 (M17/133)
Solder
.750(19.1)
.090(2.3)
C47
P9
D1
—
901-9210-2
1
.141" (3.6mm) Semi-Rigid
Solder to Body
RG-402 (M17/130)
Solder
.750(19.1)
1.44(3.7)
C47
P10
D1
—
901-9210-1
1
Crimp
Solder
1.50(38.1)
.220(5.6)
C56
P13
D1
Capt. Contact
▲ 901-9610-1SF
2
Crimp
Solder
1.50(38.1)
.220(5.6)
C56
P13
D1
Non Capt. Contact
▲ 901-10021-1SF
3
174, 179, 187,
188, 316
Crimp
Solder
1.50(38.1)
.128(3.3)
C56
P11
D1
Capt. Contact
▲ 901-9610-3
2
Crimp
Solder
1.50(38.1)
.128(3.3)
C56
P11
D1
Non Capt. Contact
▲ 901-10021-3SF
3
Crimp
Solder
1.50(38.1)
.128(3.3)
C56
P13
D1
Capt. Contact
▲ 901-9610-3SF
2
Double Braid 316
Crimp
Solder
1.50(38.1)
.128(3.3)
C56
P13
D1
Non Capt. Contact
▲ 901-10021-12SF 3
Crimp
Solder
1.50(38.1)
.142(3.6)
C56
P13
D1
Capt. Contact
901-9610-12SF
2
LMR 240
Crimp
Solder
1.08(27.4)
.261(6.6)
C56
P13
D1
Capt. Contact
901-10015
2
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
63
SMA
55, 142, 223, 400
Amphenol®
SMA
PCB Jack Receptacles
Fig. 2
Fig. 1
Fig. 3
.594
(15.1)
.375
(9.53)
.456
(11.6)
a
.050(1.3)
dia.
.543
.405
(13.8)
(10.3)
.050
(1.27)
dia.
.100
(2.5)
.155
(3.94)
.100
(2.5)
.200
(5.1)
.200
(5.1)
.067
(1.7) dia.
5 holes
.067
(1.7) dia.
5 holes
SMA Printed Circuit Receptacle
Gold Plated
Blunt Post Terminal
Four Legs
901-144 ▲
.155(3.9) Legs & Term.
901-144-2
.105(2.7) Solder Dipped Legs & Term.
901-144-3
.155(3.9) Solder Dipped Legs & Term.
901-144-4
.200(5.1) Legs & Term
with Stand-off Pads
SMA Printed Circuit Receptacle
Gold Plated
Blunt Post Terminal
Four Legs
.025 Stand-off Pads
901-143 ▲
.155(3.9) Legs & Term.
901-143-3
.155(3.9) Solder Dipped Legs & Term.
901-143-4
.105(2.7) Solder Dipped Legs & Term.
SMA Printed Circuit Receptacle
Edge Mount
901-9850
for .062” Printed Circuit Board
901-10003
for .062” Printed Circuit Board
901-10019
for .032” Printed Circuit Board
SMA PRINTED CIRCUIT RECEPTACLES – female contacts
Description
Terminal
Type
Plt.
Ins.
MTG
Hole
Construction Notes
—
Printed Circuit Board
Panel Jack Receptacle
Blunt Post
P11
D1
T
Captive Contact
Blunt Post
Printed Circuit Board
Edge Mt Jack Receptacle
Blunt Post
P10
D1
—
Blunt Post
Blunt Post
P11
P11
D1
D1
—
—
P11
D1
T
.025 Stand-off Pads
.155(3.9)
Amphenol
Number
▲ 901-144
Fig.
1
Solder Dipped Legs & Term
.105(2.7)
901-144-2
Solder Dipped Legs & Term
.155(3.9)
901-144-3
1
.025 Stand-off Pads
.200(5.1)
901-144-4
1
—
Printed Circuit Board
Angle Jack Receptacle
Dim.
a
.155(3.9)
▲ 901-143
1
2
Solder Dipped Legs & Term
.155(3.9)
901-143-3
2
Solder Dipped Legs & Term
.105(2.7)
901-143-4
2
For .062” Thick PCB
Brass Body
.475 (12)
901-9850
3
For .062" Thick PCB
For .032" Thick PCB
Brass Body
Brass Body
.375 (9.5)
.350(8.9)
901-10003
901-10019
3
3
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
64
Fig. 1
SMA
Amphenol®
SMA
PCB Press Fit Jacks
Fig. 2
SMA PCB Press FIt Jack
High Retention
901-144-PF8
Compliant Pin
SMA PCB Press FIt Jack
901-144-PFD
Compliant Pin
SMA
SMA PCB PRESS FIT JACKS
Fig.
Gold Plated Body, Legs Tin/Lead
Amphenol
Number
901-144-PFD
Gold Plated Body, Legs Tin/Lead
901-44-PF8
2
Plt.
Ins.
Construction Notes
SMA PCB Press-Fit Jack
Terminal
Type
Compliant Pin
P11
D1
SMA PCB Press-Fit Jack
Compliant Pin
P11
D1
Description
Amphenol Corporation Tel: 800-627-7100
1
www.amphenolrf.com
65
Amphenol®
SMA
Panel Jack Receptacles – 4-hole Flange
Fig. 1
Fig. 2
Fig. 3
.050(1.3)
deep
.050(1.3)
o.d.
.030(0.8)
i.d.
.050(1.3)
o.d.
solder cup
a
a
c
.050(1.3)
o.d.
slot
slot
width
a
c
c
.115(2.9)
.065(1.65)
.050(1.3)
dia. post
.065(1.6)
.065(1.6)
.270
(6.8)
.187
(4.8)
.340
(8.6)
.187
(4.8)
.340
(8.6)
.102
(2.6) dia.
4 holes
.340
(8.6)
.102
(2.6) dia.
4 holes
.102
(2.6) dia. .500
(12.7)
.102
(2.6) dia.
4 holes
.102
(2.6) dia. .500
(12.7)
.340
(8.6)
.102
(2.6) dia. .500
(12.7)
.340
(8.6)
SMA Panel Jack Receptacle
4-Hole Square Flange Mount
Solder Cup Terminal
901-9215
Gold Plated Body
901-9215-SF
Passivated Body
.340
(8.6)
SMA Panel Jack Receptacle
4-Hole Square Flange Mount
Slot Terminal
901-9204-4CC
Gold Plated Body
901-9204-4CCSF
Passivated Body
901-9204-3CCSF
Passivated Body
SMA Panel Jack Receptacle
4-Hole Square Flange Mount
Post Terminal
Flush TFE
Countersink Flange Holes
901-9758
SMA PANEL JACK RECEPTACLES – 4-hole square flange mount
Terminal
Type
Dimensions In. (mm)
a
c
Plt.
Ins.
Notes
Amphenol
Number
Fig.
.575(14.6)
.375(9.5)
P10
D1
Captive Contact, Gold Plt. Body
901-9215
1
.575(14.6)
.375(9.5)
P13
D1
Captive Contact, Passivated Body
901-9215-SF
1
.425(10.8)
.375.(9.5)
P9
D1
Captive Contact, Gold Plt. Body
901-9204-4CC
3
.425(10.8)
.375.(9.5)
P12
D1
Captive Contact, Passivated Body
901-9204-4CCSF
3
Slot .030"(0.8mm) Wide
.425(10.8)
.375.(9.5)
P12
D1
Captive Contact, Passivated Body
901-9204-3CCSF
3
Blunt Post .115"(2.9mm) Long
.490(12.4)
.375(9.5)
P13
D1
Captive Contact, Passivated Body
901-9758
2
Solder Cup .200"(5.1mm) Long
Slot .015"(0.4mm) Wide
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
66
Fig. 2
Fig. 1
Fig. 3
.050(1.3)
o.d.
.475(12.1)
a
.375
(9.53)
.375(9.5)
.600(15.24)
d
.065
(1.65)
b dia. (TFE)
e
.375(9.5)
b
c dia. post
.065(1.65)
.065(1.65)
.102
(2.6) dia. .500
(12.7)
.187
(4.8)
.102
(2.6) dia. .500
(12.7)
.187
(4.8)
.340
(8.6)
.340
(8.6)
.340
(8.6)
.102
(2.6) dia.
4 holes
SMA Panel Jack
4-Hole Square Flange Mount
Exposed TFE
Blunt Post Terminal
901-9204-CC
.590 Exposed TFE
901-9204-CCSF
.590 Exposed TFE
901-9757
.590 Exposed TFE
901-9839
.205 Exposed TFE
901-9184-CCSF
.087 Exposed TFE
901-9789
.060 Exposed TFE
.050
(1.3)
SMA Panel Jack Receptacle
Tab Terminal
Captivated
901-9215-3CCSF
Passivated
.340
(8.6)
.340
(8.6)
.102
(2.6) dia.
4 holes
.102(2.8)
tab length
.102
(2.6) dia. .500
(12.7)
.187
(4.8)
.340
(8.6)
.102
(2.6) dia.
4 holes
.005
(.13)
c
Ø .010
(.25)
Ø .085
(2.2)
SMA Panel Jack
4-Hole Square Flange Mount
Exposed TFE
Blunt Post Terminal
901-9804-1
.125 Exposed TFE
SMA PANEL JACK RECEPTACLES – 4-hole square flange mount
Terminal
Type
a
b
Dimensions In. (mm)
c
d
e
Plt.
Ins.
Amphenol
Number
Fig.
1.08(27.4)
.162(4.1) dia
.050(1.3) dia
.590(15.0)
.115(2.9)
P9
D1
901-9204-CC
2
1.08(27.4)
.162(4.1) dia
.050(1.3) dia
.590(15.0)
.115(2.9)
P13
D1
901-9204-CCSF
2
Blunt Post
1.08(27.4)
.162(4.1) dia
.050(1.3) dia
.590(15.0)
.115(2.9)
P13
D1
901-9757
2
Blunt Post
.640(16.2)
.162(4.1) dia
.050(1.3) dia
.205(5.2)
.060(1.5)
P13
D1
901-9839
2
Blunt Post
.562(14.3)
.162(4.1) dia
.050(1.3) dia
.087(2.2)
.100(2.5)
P13
D1
901-9184-CCSF
2
Blunt Post
.560(14.2)
.162(4.1) dia
.050(1.3) dia
.060(1.5)
.125(3.2)
P13
D1
901-9789
2
—
.085(2.2) dia
.010(0.3) dia
—
—
P13
D1
901-9804-1
3
Captive Contact, Flush TFE, Conforms to M83517/1-31004 (NQ)*
P12
D1
901-9215-3CCSF
1
Blunt Post
Blunt Post, Solder Dipped
Tab ‡ .100 (2.5) Long
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
67
SMA
Amphenol®
SMA
Panel Jack Receptacles – 4-hole Flange
Amphenol®
SMA
Panel Plug Receptacles – 4-hole Flange
Fig. 1
Fig. 2
.050(1.3)
o.d.
.050(1.3)
o.d.
a
.507
(12.9)
a
.507
(12.9)
d
.162(4.1)
dia. (TFE)
.312(7.9)
hex.
.050(1.3)
dia. post
.312(7.9)
hex.
.102
(2.6) dia. .500
(12.7)
.187
(4.8)
.115(2.9)
.065(1.65)
.065(1.65)
.102
(2.6) dia. .500
(12.7)
.187
(4.8)
.340
(8.6)
.340
(8.6)
.050(1.3)
dia. post
.340
(8.6)
.340
(8.6)
.102
(2.6) dia.
4 holes
.102
(2.6) dia.
4 holes
.102
(2.6) dia. .500
(12.7)
.340
(8.6)
SMA Panel Plug Receptacle
4-Hole Square Flange Mount
.062 dia. Exposed TFE
.050 dia. Post Terminal
901-9214-CC
Gold Plated
901-9214-CCSF
Passivated
901-9788
Passivated with Conductive Epoxy Cap
SMA Panel Plug Receptacles
4-Hole Square Flange Mount
Flush TFE
.050 dia. Post Terminal
901-9767
901-9760
(Countersink Flange Holes)
SMA PANEL PLUG RECEPTACLES – 4-hole square flange
Description
Dim Inches (mm)
a
d
Plt.
Construction Notes
Ins.
Amphenol
Number
Fig.
Blunt Post/.158(4.0) Long
.995(25.3)
.330(8.4)
P9
D1
Captive Contact/.330(8.4) Exposed TFE
Gold Plated Body
901-9214-CC
1
Blunt Post/.158(4.0) Long
.995(25.3)
.330(8.4)
P12
D1
Captive Contact/.330(8.4) Exposed TFE
Passivated Body
901-9214-CCSF
1
Blunt Post/.115(2.9) Long
1.21(30.8)
.59015.0)
P13
D1
Captive Contact/.590(15.0) Exposed TFE
Passivated Body
901-9788
1
Blunt Post/.115(2.9) Long
.622(15.8)
—
P13
D1
Captive Contact/Flush TFE
Passivated Body
901-9767
2
Blunt Post/.115(2.9) Long
.622(15.8)
—
P13
D1
Captive Contact/Flush TFE
C'sink Flange Holes
Passivated Body
901-9760
2
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
68
Fig. 1
Fig. 2
.050(1.3)
o.d.
.030(0.8)
i.d.
.050(1.3)
o.d.
solder cup
.575(14.6)
1.08(27.5)
.375
(9.5)
.375
(9.53)
.175(4.4)
.102
(2.6)
dia.
.625(15.9)
.233(5.7)
.065(1.7)
thick
.162(4.1)dia. (TFE)
.065
(1.65)
.065(1.65)
.481(12.2)
d
a TFE
a
TFE
.102
(2.6)
dia.
.270
(6.8)
.481
(12.2)
.481(12.2)
.270
(6.8)
.233(5.7)
.102(2.6)dia.
2 holes
.481
(12.2)
.625(15.9)
.065(1.7)
thick
.102(2.6)dia.
2 holes
SMA Panel Jack Receptacles
2-Hole Trimline Flange Mount
Exposed TFE
Blunt Post Terminal
901-9000-CC
Gold Plated
901-9000-CCSF
Passivated Finish
901-9185-CCSF
Passivated Finish
SMA Panel Jack Receptacles
2-Hole Trimline Flange Mount
Solder Cup Terminal
901-9244-2
Gold Plated
SMA PANEL JACK RECEPTACLES – 2-hole trimline flange
Description
Terminal
Type
Panel Jack Receptacle
Solder Cup
Panel Jack Receptacle
Blunt Post
Panel Jack Receptacle
Blunt Post
Plt.
P10
D1
P10
D1
P13
D1
P13
D1
Amphenol
Number
Construction Notes
Ins.
Captive Contact/
a= .025" (0.6mm) Exposed TFE
Captive Contact/d=.117(3.0) Long Post
a= .590" (15.0mm) Exposed TFE
Captive Contact/d=.103(2.6) Long Post
a= .334" (8.5mm) Exposed TFE
Amphenol Corporation Tel: 800-627-7100
Gold Plated
901-9244-2
Fig.
1
Gold Plated
901-9000-CC
2
Passivated
901-9000-CCSF
2
Passivated
901-9185-CCSF
2
www.amphenolrf.com
69
SMA
Amphenol®
SMA
Panel Jack Receptacles – 2-hole Flange
Amphenol®
SMA
Panel Jack Receptacles – 2-hole Flange
Fig. 1
Fig. 2
.100(2.5)
deep
.025(0.6)
slot width
socket
width
.050(1.3)
o.d.
.050(1.3)
o.d.
slot
.036(0.9)
i.d.
.630(16.0)
.375
(9.5)
.375
(9.5)
.230(5.8)
.025(0.6)
TFE
.062(4.1)
dia. TFE
.062(4.1)
dia. TFE
.065(1.65)
.065(1.65)
.102
(2.6)
dia.
.481(12.2)
.625(15.9)
.233(5.7)
.065(1.7)
thick
.102
(2.6)
dia.
.270
(6.8)
.481
(12.2)
.481(12.2)
.102(2.6)dia.
2 holes
.270
(6.8)
.481
(12.2)
.625(15.9)
.233(5.7)
.065(1.7)
thick
.102(2.6)dia.
2 holes
.223" Wide 2-Hole Trimline Flange
.223" Wide 2-Hole Trimline Flange
SMA Panel Jack Receptacles
Slot Terminal
901-9244-1 ‡
Gold Plated
901-9244-1SF ‡
Passivated Finish
SMA Panel Jack Receptacles
Socket Terminal
901-9814
Flush TFE,
Conductive Epoxy Cap
901-9770
.185 Exposed TFE
SMA PANEL RECEPTACLES – 2-hole trimline flange
Amphenol
Number
Terminal
Type
Plt.
Panel Jack Receptacle
Slot .025"
(0.6mm) wide
P9
D1
P13
D1
Contact Shipped Unassembled/
.025" (0.6 mm) Exposed TFE
Panel Jack Receptacle
Socket
P13
D1
Flush TFE
Passivated Body
901-9814
2
Panel Jack Receptacle
Socket
P13
D1
.085 Exposed TFE
Passivated Body
901-9770
2
Description
Construction Notes
Ins.
Fig.
Gold Plated
‡ 901-9244-1
1
Passivated
‡ 901-9244-1SF
1
‡ Contact shipped unassembled. User has option for slot orientation
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
70
Fig. 1
Fig. 2
Fig. 3
a
.500
(12.7)
d TFE
.450
(11.4)
a
.125
(3.2)
max.
panel
.500
(12.7)
.180(4.5)
a
.100
(2.54)
d TFE
.080(2.03)
.050
(1.27)
dia.
.230(5.8)
across
one flat
.375
(9.5)
hex.
.312
(7.9)
hex.
.612(4.1)
dia. TFE
.162(4.1)
dia. TFE
lockwasher
.250-36
UNS-2A thd.
.312(7.92) hex.
.050(1.3)
o.d.
.030(0.8)
i.d.
solder cup
.050(1.3)
o.d.
.235
(6.0)
.050(1.3)
o.d.
.235
(6.0)
.260
(6.60)
.260
(6.60)
SMA Bulkhead Receptacle
Rear Mount
Solder Cup Terminal
Hex Flange
901-9211
Gold Plated, Epoxy Captivated
901-9211-SF
Passivated Finish, Epoxy Captivated
901-10032-SF
Gold Plated, Mechanically Captivated
901-10032
Passivated Finish, Mechanically Captivated
.250-36UNS 2B
SMA Bulkhead Receptacle
Front or Rear Mount
Blunt Post Terminal
901-9220
Gold Plated
901-9220-SF
Passivated Finish
901-9835
Gold Plated/Flush TFE
SMA Bulkhead Receptacle
Front Mount
Post Terminal
Hex Flange
901-9841
Gold Plated
without Nut & Washer
SMA BULKHEAD RECEPTACLES – female contacts
Description
Terminal
Type
Plt.
Construction Notes
Ins.
Dim Inches (mm)
a
d
Amphenol
Number
Fig.
Rear Mount/
Hex Flange
Solder Cup
P10
D1
Captive Contact/
Gold Plated
.668(17.0)
.066(1.7)
901-9211
1
Solder Cup
P13
D1
.066(1.7mm) Exposed TFE
Passivated
.668(17.0)
.066(1.7)
901-9211-SF
1
Front or
Rear Mount
Blunt Post
P10
D1
Captive Contact/
Gold Plated
.660(16.7)
.076(1.9)
901-9220
2
Blunt Post
P13
D1
.076(1.9mm) Exposed TFE
Passivated
.660(16.7)
.076(1.9)
901-9220-SF
2
2
Blunt Post
P11
D1
Captive Contact/Flush TFE
Gold Plated
.625(15.9)
.076(1.9)
901-9835
Front Mount
Post
P11
D1
Flush TFE
Gold Plated
.400(10.2)
—
901-9841
3
Rear Mount
Solder Cup
P10
D1
Mechanically captivated
Gold Plated
.668(17.0)
.066(1.7)
901-10032
1
Hex. Flange
Solder Cup
P13
D1
Mechanically captivated
Passivated
.668(17.0)
.066(1.7)
901-10032-SF
1
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
71
SMA
Amphenol®
SMA
Bulkhead Receptacles
Amphenol®
SMA
Bulkhead Receptacles
Fig. 1
Fig. 3
Fig. 2
a
.110(2.79)
a
a
b
b
b
across 2 flats
.050(1.27) dia.
.205
+ .0, -.002
.250-36UNS
2B
.250-36UNS 2B
.250-36UNS 2B
SMA
Bulkhead Receptacle
(Plug)
Press-Fit Mount
901-9856
SMA
Bulkhead Receptacle
(Jack)
901-9847
SMA
Launcher
901-9023
SMA BULKHEAD RECEPTACLES – female contacts
Description
Terminal
Type
Plt.
Ins.
Dim Inches (mm)
a
b
Construction Notes
Amphenol
Number
Fig.
Press-Fit
Tab
P13
D1
Flush TFE
Passivated
.375(9.53)
.206(5.23)
901-9856
1
Front or
Rear Mount
Socket
P13
D1
Flush TFE
Passivated
.500(12.7)
.210(5.33)
901-9847
2
Socket
P13
D1
Flush TFE/ w/o Nut & Washer
Passivated
.425(10.8)
.210(5.33)
901-9023
3
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
72
Fig. 1
Fig. 2
Fig. 3
.050(1.3)
o.d.
.050(1.3)
o.d.
a
.400
(10.2)
.030
(10.7)
e
.100
(2.54)
a
.125
(3.18)
.090
(2.29)
.050
(1.27)
dia.
.312(7.92) hex.
.375-32UNF 2A thd.
SMA Mid-Flange
Bulkhead Receptacle
Front Mount
Post Terminal
901-9842
.150
(3.81)
.050
(1.27)
dia.
e
.020
(.508)
dia.
.375-32
UNF-2A
.437(11.1)
hex.
a
.160(4.06)
e
.312(7.92) hex.
.250-36UNS 2B
.250-36UNS 2B
SMA Mid-Flange
Bulkhead Receptacle
Front Mount
Post Terminal
901-9909
SMA Mid-Flange
Bulkhead Receptacle
Front Mount
Post Terminal
901-9911
SMA MID-FLANGE BULKHEAD RECEPTACLES – female contacts
Description
Terminal
Type
Plt.
Construction Notes
Ins.
Dim Inches (mm)
a
e
Amphenol
Number
Fig.
Front Mount
Blunt Post
P13
D1
Flush TFE
Passivated
.706(17.9)
.306(7.77)
901-9842
1
Front Mount
Blunt Post
P13
D1
.020 Spherical Radius
Passivated
.600(15.2)
.220(5.89)
901-9909
2
Front Mount
Blunt Post
P12
D1
Gold over Copper Contact
Passivated
.500(12.7)
.188(4.78)
901-9911
3
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
73
SMA
Amphenol®
SMA
Mid-Flange Receptacles
Amphenol®
SMA
In-Series Adapters
Fig. 1
Fig. 2
DC-18 GHz
1.14 VSWR
max.
DC-18 GHz
1.14 VSWR max.
.500
(12.7)
.720(18.2)
.125
(3.2)
.250
(6.4)
.218(5.5)
across 2 flats
.250-36
UNS-2A
.312(7.9)
hex.
SMA Straight Adapter, Plug-Jack
901-9216
Gold Plated
901-9216-SF
Passivated Finish
SMA Straight Adapter, Jack-Jack
901-9217
Gold Plated
901-9217-SF
Passivated Finish
Fig. 3
Fig. 4
DC-18 GHz
1.14 VSWR max.
DC-18 GHz
1.23 VSWR max.
.875(22.2)
.625(15.9)
.500(12.7)
.125(3.2)
.312
(7.92)
hex.
.218(5.5)
across 2 flats
.585
.458 (14.9)
(11.6)
.312
(7.92)
hex.
.218(5.5)
across 2 flats
SMA Angle Adapter, Plug-Jack
901-125-11
Gold Plated
901-125-11SF
(M55339/02-30001) Passivated
SMA Straight Adapter, Plug-Plug
901-9218
Gold Plated
901-9218-SF
Passivated Finish
SMA IN-SERIES ADAPTERS
Description
Straight Jack-Jack
Straight Plug-Jack
Straight Plug-Plug
Angle Plug-Jack
Plt.
P9
P12
P9
P12
P10
P12
P13
P13
Ins
Notes
Amphenol
Number
D1
DC-18GHz Max. VSWR 1.14
Captive Contact
Passivated
D1
DC-18GHz Max. VSWR 1.14
Captive Contact
Gold Plated
—
901-9216
Passivated
—
901-9216-SF
D1
DC-18GHz Max. VSWR 1.14
Captive Contact
Gold Plated
—
901-9218
Passivated
—
901-9218-SF
DC-18GHz Max. VSWR 1.23
Gold Plated
—
Captive Contact
Passivated
02-30001
D1
Amphenol Corporation Tel: 800-627-7100
Gold Plated
Mil. No.
M55339/
—
—
901-9217
901-9217-SF
901-125-11
901-125-11SF
Fig.
1
2
3
4
www.amphenolrf.com
74
Fig. 1
Fig. 2
Fig. 3
a
.875(22.2)
.575
(14.6)
.250
(6.4)
max
panel
a
.230(5.8)
across
one flat
e
d
e
.312
(7.92)
hex.
d
.065
(1.7)
.250-36
UNS-2A
.312
(7.9)
hex.
lock
washer
.375(9.5) hex.
.260(6.6)
.235
(6.0)
SMA Bulkhead Adapter
Jack-Jack
901-9209-A
Gold Plated
901-9209-ASF
Passivated Finish
SMA Tee Adapter
Plug-Jack-Jack
901-382-1
Gold Plated
SMA Tee Adapter
Jack-Jack-Jack
901-178
Gold Plated
SMA IN-SERIES TEE ADAPTERS
Tee Adapter, Jack-Jack-Jack
Dimensions, Inches (millimeters)
a
d
e
1.00(25.4)
.687(17.5)
.500(12.7)
P9
D1
BeCu Body
901-178
1
Tee Adapter, Plug-Jack-Jack
1.08(27.4)
P9
D1
BeCu Body
901-382-1
2
Description
.687(17.5)
Plt.
.500(12.7)
Ins
Notes
Amphenol
Number
Fig.
SMA IN-SERIES BULKHEAD ADAPTERS
Description
Bulkhead Jack-Jack
Front or Rear Mount
Plt.
P11
P13
Ins
D1
Notes
DC-18GHz Max. VSWR 1.14
Captive Contact
Amphenol Corporation Tel: 800-627-7100
Amphenol
Number
901-9209-A
901-9209-ASF
Fig.
3
www.amphenolrf.com
75
SMA
Amphenol®
SMA
In-Series Adapters
Amphenol®
SMA
Brass Coaxial Connectors
Amphenol has available a line
of 50 ohm SMA brass connectors
as a cost effective solution for
applications where stainless steel
construction is not required. This
gives the design engineer flexibility
with performance to complete
projects with world class
components.
Amphenol series 901 SMA brass
connectors are semi-precision,
subminiature units which provide
electrical performance from DC to
18 GHz. These high performance
connectors are compact in size
and mechanically have
outstanding durability.
SPECIFICATIONS*
Impedance
50 ohms
Frequency range
.141" & .085" O.D.
copper jacket semirigid cable. 0-18GHz.
Flexible cables:
0-12.4 GHz.
Voltage rating
• Connectors are built in
accordance with MIL-C-39012.
RG-58,141,142:
500 volts peak
RG-174, 188, 316:,
375 volts peak
Dielectric
withstanding voltage
.141" & RG-58 group:
1,000 VRMS.
.085" & RG-316 group:
750 VRMS.
VSWR
(straight connectors)
Contact resistance
Bodies, coupling nuts,
other metal parts
(except as noted)
Male:
Brass
Female:
Beryllium copper,
heat treated
Plating:
Center contacts,
.000030" min. gold
Plating:
Other metal parts
Standard .000010"
gold or nickel plated
Insulators
TFE fluorocarbon
Gaskets
Silicone rubber
Crimp ferrules
Seamless copper tubing
alloy
MECHANICAL‡
RG-58 group:
1.15 + .01 f
Mating
RG-178 group:
1.20 + .025 f
.250-36
Threaded coupling
Mating Torque
Minimum:
2 inch pounds
12 N.cm
Center: 2.0 milliohms
Body: 2.0 milliohms
Recommended:
8 to 10 inch pounds
45 N.cm
Braid to body: 0.5
milliohms
Insulation resistance:
RF leakage
Insertion loss:
Brass per QQ-B-626
Contacts
.141" O.D. semirigid cable:
1.05 + .005 f
RG-174 group:
1.15 + .02 f
Features/Benefits
• Amphenol brass SMA
connectors feature preassembled captive center
contacts, brass body and
coupling nuts.
MATERIAL
ELECTRICAL
5000 megohms
Maximum:
15 inch pounds
60 N.cm
-90 dB min. at 2.3 GHz
dB max. = .06 √ f(GHz)
Test frequency @ 6.0
GHz
Connector
Durability
100 matings
• Can be mated with all
connectors which meet the
military specification mating
diameters regardless of
manufacturer.
• Available for .085” and .141”
diameter semi-rigid cables and
all the standard flexible cables
including double shielded
RG-316.
• Connectors are adaptable to the
interconnection requirements of
both systems and components.
* These characteristics are typical and may not apply to all connectors.
‡ Pressure applied on an SMA outer contact is extremely high; therefore inadequate torque
of connector body will result in a slight deformation of the outer contact. Reflections will
appear above 2GHz.
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
76
Fig. 1
Fig. 2
Fig. 3
.440
(11.2)
.654(16.6)
.716(18.2)
c
c
c
.312(8)hex.
.312(8)hex.
.312(8)hex.
SMA Crimp Plug
Captivated Center Contact
901-9870 ▲
Gold Plated
for RG-58
901-9871 ▲
Gold Plated
for RG-223, 141
901-9876-RFX▲
Nickel Plated
for RG-58
901-10009-RFX
Gold Plated for LMR 240
901-10010-RFX
Gold Plated for LMR 200
SMA Solder Plug
901-9868-RFX▲
Gold Plated
for .141" S/R
901-9867-RFX▲
Gold Plated
for .085" S/R
SMA Crimp Plug
Captivated Center Contact
901-9877-RFX▲
Nickel Plated
for RG-174, 188, 316
901-9916
Gold Plated
for RG-174, 188, 316
901-10024-RFX
Nickel Plated
for RD-174, 188, 316
901-10025-RFX
Gold Plated
for RD-174, 188, 316
SMA BRASS PLUGS
Cable
RG-/U
Connector
Description
Cable Attachment
Outer
Inner
c Dia
In. (mm)
CAI
Ins.
Notes
Amphenol
Number
Fig.
58
Plug
Crimp
Solder
.210(5.3)
C53
D1
Captive Contact
▲ 901-9870
2
58
Plug
Crimp
Solder
.210(5.3)
C53
D1
Captive Contact
▲ 901-9876-RFX
2
▲ 901-9877-RFX
3
174, 188, 316
Plug
Crimp
Solder
.128(3.3)
C57
D1
Captive Contact
RD 174, 188, 316
Plug
Crimp
Solder
.128(3.3)
C57
D1
Captive Contact
901-9916
RD 174, 188, 316
Plug
Crimp
Solder
.128(3.3)
C57
D1
Captive Contact
901-10024-RFX 3
174, 188, 316
Plug
Crimp
Solder
.128(3.3)
C57
D1
Captive Contact
141, 223
Plug
Crimp
Solder
.220(5.6)
C53
D1
Captive Contact
.085" S/R
Plug
Solder
Solder
.090(2.3)
C47
D1
.141" S/R
Plug
Solder
Solder
.145(3.7)
C47
LMR 240
Plug
Crimp
Solder
.261(6.6)
LMR 200
Plug
Crimp
Solder
.206(5.2)
3
901-10025-RFX 3
▲ 901-9871
2
—
▲ 901-9867-RFX
1
D1
—
▲ 901-9868-RFX
1
C53
D1
Captive Contact
901-10009-RFX 2
C53
D1
Captive Contact
901-10010-RFX 2
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
77
SMA
Amphenol®
SMA
Brass Plugs
Amphenol®
SMA
Brass Angle Plugs & Bulkhead Jacks
Fig. 1
Fig. 2
.673(17.1)
.516(13.1)
.610(15.5)
.400(10.2)
.375
(9.53)
.312(8)hex.
.638
(16.2)
.312(8)hex.
c
SMA Angle Plug, Crimp
901-9872 ▲
Gold Plated for RG-174, 188, 316
901-9873 ▲
Gold Plated for RG-58
901-9874 ▲
Gold Plated for RG-141, 223
901-9880-RFX▲
Nickel Plated for RG-58
901-9881-RFX▲
Nickel Plated for RG-174, 188, 316
901-10028-RFX
Gold Plated for RD-174, 188, 316
901-10029-RFX
Nickel Plated for RD-174, 188, 316
.126(3.2) dia.
.220(5.9) dia.
SMA Low Profile
Angle Plug, Crimp
901-9902
Nickel Plated for RG-141, 223
Fig. 3
Fig. 4
.312(8)
hex.
.780(19.8)
.450
(11.4)
c
.312(8)
hex.
.276(7.0)
.125(3.2)
max.
panel
.235
(6.0)
.260
(6.60)
SMA Bulkhead Jack, Crimp
901-9875 ▲
Gold Plated for RG-174, 188, 316
901-9879-RFX▲
Nickel Plated for RG-174, 188, 316
SMA Bulkhead Jack with O-Ring
901-10013-RFX
RG-174, 188, 316
SMA BRASS ANGLE PLUGS
Cable
RG-/U
Connector
Description
Cable Attachment
Outer
Inner
c Dia
In. (mm)
CAI
Ins.
Notes
Amphenol
Number
Fig.
Angle Plug
Crimp
Solder
.210(5.3)
C53
D1
Gold Plated Body
▲ 901-9873
1
Angle Plug
Crimp
Solder
.210(5.3)
C53
D1
Nickel Plated Body
▲ 901-9880-RFX
1
Angle Plug
Crimp
Solder
.128(3.3)
C57
D1
Nickel Plated Body
▲ 901-9881-RFX
1
Angle Plug
Crimp
Solder
.128(3.3)
C57
D1
Gold Plated Body
▲ 901-9872
1
Angle Plug
Crimp
Solder
.128(3.3)
C57
D1
Gold Plated Body
901-10028-RFX
1
Angle Plug
Crimp
Solder
.128(3.3)
C57
D1
Nickel Plated Body
901-10029-RFX
1
141, 223
Angle Plug
Crimp
Solder
.220(5.6)
C53
D1
Gold Plated Body
141, 223
Low Profile Angle Plug
Crimp
Solder
.220(5.6)
C53
D1
Plated Body
58
174, 188,
316
▲ 901-9874
1
901-9902
2
SMA BRASS BULKHEAD JACKS
Bulkhead Jack
Cable Attachment
Outer
Inner
Crimp
Solder
.128(3.3)
C53
D1
Gold Plated Body
▲ 901-9875
3
Bulkhead Jack
Crimp
Solder
.128(3.3)
C53
D1
Nickel Plated Body
▲ 901-9879-RFX
3
Bulkhead Jack
Crimp
Solder
.128(3.3)
C53
D1
Nickel Plated Body
Cable
RG-/U
174, 188, 316
Connector
Description
c Dia.
In. (mm)
CAI
Ins.
Notes
Amphenol
Number
Fig.
901-10013-RFX 4
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
78
Fig. 1
Fig. 2
.102
(2.6)
dia.
.481(12.2)
.102
(2.6)
dia.
.270
(6.8)
.481
(12.2)
.625(15.9)
.233(5.7)
.481(12.2)
.065(1.7)
thick
.575(14.6)
.375
(9.53)
.481
(12.2)
.625(15.9)
.233(5.7)
.102(2.6)dia.
2 holes
.065(1.7)
thick
.270
(6.8)
.102(2.6)dia.
2 holes
1.08(27.4)
.590(15.0)
.065
(1.65)
.375
(9.53)
.065(1.65)
.050(1.3)
o.d.
.050(1.3)
o.d.
.050
.160(4.06) dia. (1.27)
dia.
.030(0.8)
i.d.
solder cup
SMA Panel Receptacle (Jack)
Solder Cup terminal
901-9893-RFX▲
Nickel Plated
SMA Panel Receptacle (Jack)
Post terminal
901-9891-RFX▲
Nickel Plated
Fig. 3
Fig. 4
.102
(2.6) dia. .500
(12.7)
.102
(2.6) dia. .500
(12.7)
.270
(6.8)
.340
(8.6)
.270
(6.8)
.340
(8.6)
.340
(8.6)
.102
(2.6) dia.
4 holes
.340
(8.6)
.102
(2.6) dia.
4 holes
.575(14.6)
.375
(9.53)
.375(9.53)
.065(1.65)
.065
(1.65)
1.08(27.4)
.590(15.0)
.050(1.3)
o.d.
.160
(4.06)
dia.
.030(0.8)
i.d.
.050(1.3)
o.d.
.050(1.27) dia.
solder cup
SMA Panel Receptacle (Jack)
Post terminal
901-9887-RFX▲
Nickel Plated
SMA Panel Receptacle (Jack)
Solder Cup terminal
901-9892-RFX▲
Nickel Plated
SMA BRASS PANEL JACK RECEPTACLES
Connector
Description
Terminal
Type
Ins
Construction
Notes
Amphenol
Number
Fig.
Panel Receptacle (Jack)
Solder Cup
D1
Nickel Plated Body
▲ 901-9893-RFX
1
Panel Receptacle (Jack)
Post
D1
Nickel Plated Body
▲ 901-9891-RFX
2
Panel Receptacle (Jack)
Solder Cup
D1
Nickel Plated Body
▲ 901-9892-RFX
3
Panel Receptacle (Jack)
Post
D1
Nickel Plated Body
▲ 901-9887-RFX
4
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
79
SMA
Amphenol®
SMA
Brass Receptacles
Amphenol®
SMA
Brass Receptacles
Fig. 2
Fig. 1
Fig. 3
.050(1.3)
o.d.
.050(1.3)
o.d.
.030(0.8)
i.d.
.050(1.3)
o.d.
.030(0.8)
i.d.
solder cup
solder cup
.670(17.0)
.375(9.53)
.145(3.68)
.160(4.06) dia.
.050
(1.27)
dia.
.102
(2.6) dia. .500
(12.7)
.500(12.7)
.450(11.4)
.220
(5.59)
.312
(8)
hex.
.312(8) hex.
Maximum panel .126 (3.2mm)
.270
(6.8)
.340
(8.6)
.680(17.3)
.680(17.3)
.280
(7.11)
.235
(6.0)
.340
(8.6)
.235
(6.0)
.260
(6.60)
.260
(6.60)
.102
(2.6) dia.
4 holes
SMA Panel Receptacle (Jack)
Post terminal
901-9888
Gold Plated
SMA Bulkhead Receptacle (Jack)
Solder Cup terminal
901-9889-RFX▲
Nickel Plated
Front Mount
SMA Bulkhead Receptacle (Jack)
Solder Cup terminal
901-9890-RFX▲
Nickel Plated
Rear Mount
SMA BRASS PANEL JACK RECEPTACLES
Connector
Description
Panel Receptacle (Jack)
Terminal
Type
Post
Ins
D1
Construction
Notes
Gold Plated Body
Amphenol
Number
Fig.
901-9888
1
Amphenol
Number
Fig.
SMA BRASS BULKHEAD RECEPTACLES
Connector
Description
Terminal
Type
Ins
Construction
Notes
Bulkhead Receptacle (Jack), Front Mount
Solder Cup
D1
Nickel Plated Body
▲ 901-9889-RFX
2
Bulkhead Receptacle (Jack), Rear Mount
Solder Cup
D1
Nickel Plated Body
▲ 901-9890-RFX
3
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
80
Fig. 1
.505
(12.8)
Fig. 2
.655
(16.6)
.575
(13.1)
.660(16.8)
.040 sq.(1.0)
.050
(1.27)
dia.
.200(5.08)
.545
(13.8)
.200(5.08)
.275 sq.
(7.0)
.312(8)
hex.
.312
(8)
hex.
.100
(2.54)
.050
(1.27)
.067
(1.7) dia.
5 holes
.200
(5.08)
.155
(3.94)
.040 sq.(1.0)
.200
(5.08)
.100
(2.54)
.405
(10.3)
.200(5.08)
.200(5.08)
.275 sq.
(7.0)
.067
(1.7) dia.
5 holes
SMA PCB Receptacle
(Plug)
Blunt Post Terminal
Four Legs
901-9895-RFX▲
Gold Plated
SMA PCB Angle Receptacle
(Plug)
Blunt Post Terminal
Four Legs
901-9894-RFX▲
Gold Plated
SMA BRASS PRINTED CIRCUIT BOARD PLUG RECEPTACLES
Connector
Description
Terminal
Type
Ins
Construction
Notes
Amphenol
Number
Fig.
PCB Receptacle (P)/ Four Legs
Blunt Post
D1
Gold Plated Body
▲ 901-9895-RFX
1
PCB Angle Receptacle (P)/ Four Legs
Blunt Post
D1
Gold Plated Body
▲ 901-9894-RFX
2
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
81
SMA
Amphenol®
SMA
Brass PCB Receptacles
Amphenol®
SMA
Brass PCB Receptacles
Fig. 1
Fig. 2
.569
(14.4)
.359
(9.1)
.530(13.5)
.040 sq.(1.0)
.375(9.53)
.050(1.27)
dia.
.200(5.08)
.375
.250
(9.53)
(6.4)
.200(5.08)
.275 sq.
(7.0)
a
.050(1.3)
dia.
.100
(2.54)
.040 sq.(1.0)
.100
(2.54)
.200
(5.08)
.200
(5.08)
.067
(1.7) dia.
5 holes
.200(5.08)
.275 sq.
(7.0)
.067
(1.7) dia.
5 holes
SMA PCB Receptacle
(Jack)
Blunt Post Terminal
Four Legs
901-144-8RFX▲
Gold Plated
.200(5.08)
SMA PCB Angle Receptacle
(Jack)
Blunt Post Terminal
Four Legs
901-143-6RFX▲
Gold Plated
SMA BRASS PRINTED CIRCUIT BOARD JACK RECEPTACLES
Connector
Description
Terminal
Type
Ins
Construction
Notes
Amphenol
Number
Fig.
PCB Receptacle (J)/ Four Legs
Blunt Post
D1
Gold Plated Body
▲ 901-144-8RFX
1
PCB Angle Receptacle (J)/ Four Legs
Blunt Post
D1
Gold Plated Body
▲ 901-143-6RFX
2
▲ distributor stocked
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
82
SPECIFICATIONS*
For phase array radar, test
equipment, ILS landing systems
and other instrumentation using
phase matching techniques,
these SMA connectors for
semi-rigid coaxial cables and the
SMA plug-to-Jack adapter offer a
precise and simple means of
phase adjustment for microwave
devices.
ELECTRICAL
DC-18GHz.
Mating
Mating face dimensions
compatible with the
mating requirements of
MIL-C-39012/55
(Type SMA)
Connector Durability
(SMA interface) 500
cycles of mating and
unmating without
deterioration
dB max.
For Plug 901-509
= .08 √ f(GHz)
• Adjustment nut creates
incremental changes in
connector length and angle.
VSWR
See chart below
Phase Angle
Adjustment Range
in degrees
For Adapter 901-508
and Plug 901-509,
= 0° to [10 x f(GHz)]° max
Phase Angle change
per revolution
of Adjustment Nut
in degrees
For Adapter 901-508
and Plug 901-509,
= [0.636 x f(GHz)]°
Voltage rating
500 VRMS peak
SWEPT VSWR DATA
VSWH
• Proper phase setting for each
cable is maintained by
connector locking-nuts.
• Allow phase matching to be
performed at the final
production stages.
50 ohms
Frequency range
For Adapter 901-508
= .1 √ f(GHz)
• Connectors incorporate a
threaded interconnection of
variable length.
• Connectors provide ease of
mechanical screw adjustments,
compared to the delays and
expense of laborious cabletrimming.
Impedance
Insertion loss:
Features/Benefits
(For example, one revolution of the
adjustment nut results in a phase
angle change of 5.7° for a 9 GHz
signal [0.636 x 9]°.)
MECHANICAL
1.30
1.28
1.26
1.24
1.22
1.20
1.18
1.16
MATERIAL
Center Contact
Beryllium copper,
Gold plated
Connector Body
Brass or Beryllium
Copper, Gold plated
Adjusting Nuts and
Locking Nuts
Brass with ASTRO
plate finish
Connector
Coupling Nut
Stainless Steel,
Passivated
Insulation
TFE
Amphenol Specification
ENVIRONMENTAL
1.14
1.12
1.10
1.08
1.06
1.04
1.02
Typical Data
Shock
MIL-Std. 202 method
213 (test cond. I)
Vibration
MIL-Std. 202 method
204 (test cond. D)
Corrosion
MIL-Std. 202 method
101 (test cond. B)
Temperature range
-65°C to + 125°C
* These characteristics are typical and may not
apply to all connectors.
2
4
6 8 10 12 14 16 18
Frequency GHz
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
83
SMA
Amphenol®
SMA
Phase Adjustable Connectors
Amphenol®
SMA
Phase Adjustable Connectors
Fig. 2
Fig. 1
phase
adjustment
nut
phase
adjustment
nut
locking nuts
lock connector
at desired phase
setting
locking nuts
lock connector
at desired phase
setting
dia.
.312(8)hex.
.437(11)hex.
.312(8)hex.
.437(11)
across
2 flats
.437(11)hex.
.437(11)
across 2
flats
SMA Phase Adjustable Plug
901-509
Description
Plug
Adapter
Semi-Rigid
Cable Size
.141"(3.6) dia.
Cable
Termination
Solder
—
—
SMA Adapter - Plug to Jack
901-508
Dimensions, Inches (millimeters)
a
b
(Fully Extended (Fully Closed)
CAI
2.03(51.6)
1.68(42.7)
.500(12.7)
.144(3.7)
2.50(63.5)
2.15(54.6)
.500(12.7)
—
Amphenol Corporation Tel: 800-627-7100
Plt.
Ins.
Amphenol
Number
Fig.
c
C51
PCF
D1
901-509
1
—
PCF
D1
901-508
2
www.amphenolrf.com
84
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Amphenol:
901-10011 901-10019 901-9201-1ASF 901-9221-2A 901-9511-1SFC 901-9601-3 901-9601-3SF 901-9511-1
901-9511-1SF 901-9602-3 901-10003 901-9202-1A 901-9220 901-9511-2SF 901-9521-3 901-9511-12SF 9019531-12SF 901-9201-1A 901-9531-1SF 901-10024-RFX 901-9871 901-9873 901-9850 901-9872 901-9501-3
901-10009-RFX 901-10015 901-10025-RFX 901-9201-2A 901-9531-2SF 901-9704 901-9602-1 901-10012 90110010-RFX 901-9201-2ASF 901-9602-12SF 901-9909 901-10028-RFX 901-9511-3SFC 901-10014
