902-5020-2

NOTES: REV 1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES): OUTER & INNER FERRULE - COPPER, BRIGHT ACID TIN (200 MIN THICK) OUTER & INNER BODY - BeCu, GOLD PLATING (50 MIN THICK) CONTACT - BeCu, GOLD PLATING (50 MIN THICK) WASHER - PTFE INSULATOR - PTFE 2. REVISIONS THIRD ANGLE PROJ. DESCRIPTION -- RELEASE TO MFG. J REDRAWN IN PRO-E & ADDED COD K SEE SHEET 1 ECO APPR ------ ------ ------ 3/20/15 50386 JN 9/20/13 49679 MB +0.015 +0.015 0.450 0 PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: BAG TO BE MARKED "AMPHENOL, 902-5020-2 , AND DATE CODE" DATE OUTER FERRULE +0.015 0.140 0 0.250 0 0.100 0.010 0 0.090 -0.010 SCALE 3. SHOWS CABLE ENTRY DIMENSIONS. 2.000 CONNECTOR ASSEMBLY PROCEDURE: 1. STRIP CABLE AS SHOWN.SLIDE OUTER FERRULE (ITEM 1) WELL UP OVER STEP 1 OUTER JACKET PRIOR TO FOLDING BACK CABLE SHIELD. 2. A. SLIDE TEFLON WASHER OVER INNER CONDUCTOR OF CABLE,FLUSH WITH CABLE PER ST5M1323 INNER DIELECTRIC. (TIMES AA2325) B. CRIMP INNER CONTACT TO CENTER CONDUCTOR OF CABLE,USING AMPHENOL TOOL FRAME 227-944 WITH 227-954 DIE SET 'C' GROOVE (0.034 DIAMOND). 3. SLIDE INNER FERRULE OVER OUTER CONDUCTOR AND 'INTERLAYER'. 4. FLARE OUTER CONDUCTOR SLIGHTLY AND INSERT INNER CONTACT INTO INNER BODY TO A FIRM BUTT.OUTER CONDUCTOR MUST GO OUTSIDE BACK END OF INNER BODY .SLIDE INNER FERRULE FORWARD OVER BRAID AND BUTT SHOULDER OF INNER BODY.CRIMP FERRULE USING AMPHENOL TOOL FRAME 227-944 WITH 227-954 DIE SET 'B' GROOVE (0.178 HEX). 5. ASSEMBLE INNER BODY INTO OUTER BODY TO A FIRM BUTT,FOLD CABLE SHIELD FORWARD OVER BODY.SLIDE OUTER FERRULE FORWARD OVER BRAID AND BUTT SHOULDER OF BODY. CRIMP FERRULE USING AMPHENOL TOOL FRAME 227-944 WITH 227-954 DIE SET 'A' GROOVE (0.263 HEX). 0.310 REF. 3 3 0.182 0.282 CABLE SHIELD FOLDER BACK OVER JACKET INNER CONDUCTOR OUTER CONDUCTOR STEP 2 INTERLAYER (DIELECTRIC) 1.090 REF. 0.311 REF AFTER ASSEMBLY DIMENSIONS SCALE 3.000 3 INNER FERRULE 0.024 0.250 REF TEFLON WASHER 0.214 REF INNER BODY CONTACT OUTER BODY OUTER FERRULE CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES NOTICE - These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. MATERIAL SEE NOTES REFERENCE DOR 21-902-315567, ST5M 1289,ST5M 132 ST5M 1290-001P REV H FINISH DRAWN MOHAN DATE 08-Aug-13 ENGINEER F. HULL DATE 14-Nov-91 APPROVED K. CAPOZZI DATE 8/28/13 CAD FILE TITLE PLUG TRIAX FOR TIMES AA2325 CABLE SCALE: 6.0:1.0 DWG SIZE B SHEET Amphenol RF www.amphenolrf.com DRAWING NO. 902-5020-2 2 OF 2 REV K ITEM NO. 902-5020-2 PART NO. 902-5020-2