902-9049

REVISIONS THIRD ANGLE PROJ. NOTES: 1. MATERIALS AND FINISHES(PLATING THICKNESS IN MICRO-INCHES): SHELL - BRASS(C2680R-0, T0.15), Au (2 MIN) OVER Ni (35-190MIN.) PLATING. A-PIN(MOVING) -STAINLESS STEEL (SUS301R-EH,T0.08), Au(5 MIN) OVER Ni (35-150) PLATING B-PIN(FIXED) -PHOSPHOR BRONZE (C5191R-H,T0.10), Au(5 MIN) OVER Ni (35-150) PLATING MOLD - LCP E5006L 2. ELECTRICAL: A. IMPEDANCE: 50 OHM B. FREQUENCY RANGE: DC - 6 GHz C. VSWR(RETURN LOSS): 1.4 MAX. D. DIELECTRIC WITHSTANDING VOLTAGE: 1 MIN. AC300V VRMS 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -40 C $ TO +85 C $ 4. PACKAGING: A. TAPE & REEL REV A B 2.7 C 1.4 DESCRIPTION DATE RELEASE TO MFG DOC ERROR TO CORRECT PIN MATERIAL, .1 WAS .01 DWV WAS 100V VRMS, LOW TEMP WAS -35 $C ADDED TAPE AND REEL DRAWING UPDATED PCB PCB PATTERN: 2.7 WAS 3.4, 2.7 WAS 2.65, 0.85 WAS 1.25, 0.75 WAS 1.05, THE OTHERS SEE SHEET 3 FOR DETAILS 2/18/09 ECO 47444 APPR 9/18/14 50156 EW 11/13/14 50216 0.6 3 2.7 1.4 "A" 1.4 #0.05 2 PLACES 0.85 2.7 0.6 2 #0.15 2.7 #0.05 TYP 1.6 #0.15 0.75 "B" "A" 0.55 TYP. SCALE RECOMMENDED PCB PATTERN NOTE: 1. COPLANARITY: MAX. 0.1 2. OTHERWISE TOLERANCE: #0.2 3. RF SWITCH CIRCUIT DIAGRAM: C B * UNMATED A * SIGNAL SIGNAL SIGNAL A B C "A" "B" "B" 0.4 #0.1 0.4 #0.1 : DUP. : ANT. : TEST PLUG SCALE (NC) A-B PIN: SHORT ------------------------------------* MATED WITH PLUG (NO) C-A PIN: SHORT A-B PIN: OPEN UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: