903-512J-71P

Amphenol RF SMB SMB Connectors Description ® The SMB name derives from SubMiniature B (the second subminiature design). Developed in the 1960’s, this sub miniature interface has snap-on coupling. Amphenol’s SMB connectors conform to the requirements of MIL-C-39012, and the interface is in compliance with MIL-STD348. Available in 50 Ω and 75 Ω, the SMB provides broadband capability through 10 GHz with a snap-on connector design and utilizes die cast components on non-critical areas to provide a low-cost solution. Features/Benefits • Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality. • Quick connect/disconnect snap-on mating reduces installation time. • Various plating options in nickel, gold, and tin. Selective plating provides corrosion resistance finish as well as good solderability characteristics. • SMB PCB slide-on plug and jack allows board-to-board mounting with a low insertion force. This is ideal for mating a high number of connectors on a pair of PCB’s. Applications • Automotive • Base Stations • Cable Assemblies • Components • Instrumentation • PC/LAN • Process Controls • Radio Boards • Surge Protection • Telecom • Test and Measurement • Video Systems 36 SMB Amphenol® RF: 800-627-7100 SMB 50 Ω SMB Specifications Electrical Impedance Frequency range VSWR RF-leakage Voltage rating (at sea level) Contact resistance Insulation resistance Insertion loss maximum Dielectric withstanding voltage 50 Ω DC - 4 GHz (usable to 10 GHz) 1.2 max. @ DC - 4 GHz 1.5 max. @ 4 - 10 GHz 55 dB minimum @ 1 GHz (flexible cable) ≥ 250 Vrms (depending on cable) center contact: ≤ 6 mΩ outer contact: ≤ 2.5 mΩ braid to body: ≤ 1 mΩ 5,000 MΩ minimum 0.3 dB @ 1.5 GHz 1,000 Vrms (at sea level) Mechanical Mating Braid/Jacket cable affixment Center conductor cable affixment Captivated contacts Engagement force Disengagement force Durability (matings) Snap-on coupling (MIL-STD-348) Hex crimp Solder All, unless noted otherwise ≤ 14.2 lbs (63N) ≥ 1.8 lbs (8N) 500 cycles minimum Environmental Temperature range Thermal shock Moisture resistance Corrosion Vibration Mechanical shock -65°C to +165°C MIL-STD-202, method 107, cond. B MIL-STD-202, method 106 MIL-STD-202, method 101, cond. B MIL-STD-202, method 204, cond. D MIL-STD-202, method 213, cond. B Amphenol® RF: 800-627-7100 SMB 37 SMB 50 Ω SMB Specifications (continued) Material Body and outer contacts Male contact Female contact Crimp ferrule Insulator Body: brass or zinc alloy (ASTM-B86-71), gold or nickel plated Brass, gold plated Beryllium copper or phosphor bronze, gold plated Copper or brass, nickel or gold plated PTFE Military MIL-C-22557A where applicable Plug Jack .141/.131 .141 MIN REF PLANE .141 MIN .117 MAX .117 MIN .010 MAX .007 MAX .007/.037 .007 MIN 38 SMB LC .065 MIN ø.021/.019 ø.146 MAX ø.081 MAX REF PLANE ø.082 MIN .000 MIN .010 MIN .064 MAX .052 MIN Amphenol® RF: 800-627-7100 SMB 75 Ω SMB Specifications Electrical Impedance Frequency range VSWR RF-leakage Voltage rating (at sea level) Contact resistance Insulation resistance Insertion loss maximum Dielectric withstanding voltage 75 Ω DC - 4 GHz 1.4 max. @ DC - 4 GHz 55 dB minimum @ 1 GHz (flexible cable) ≥ 250 Vrms (depending on cable) center contact: ≤ 6 mΩ outer contact: ≤ 1 mΩ braid to body: ≤ 1 mΩ 5,000 MΩ minimum 0.3 dB @ 1.5 GHz 1,000 Vrms (at sea level) Mechanical Mating Braid/Jacket cable affixment Center conductor cable affixment Captivated contacts Engagement force Disengagement force Durability (matings) Snap-on coupling (MIL-STD-348) Hex crimp Solder All, unless noted otherwise ≤ 14.2 lbs (63N) ≥ 1.8 lbs (8N) 500 cycles minimum Environmental Temperature range Thermal shock Moisture resistance Corrosion Vibration Mechanical shock -65°C to +165°C MIL-STD-202, method 107, cond. B MIL-STD-202, method 106 MIL-STD-202, method 101, cond. B MIL-STD-202, method 204, cond. D MIL-STD-202, method 213, cond. B Amphenol® RF: 800-627-7100 SMB 39 SMB 75 Ω SMB Specifications (continued) Material Body and outer contacts Male contact Female contact Crimp ferrule Insulator Body: brass or zinc alloy (ASTM-B86-71), gold or nickel plated Brass, gold plated Beryllium copper or phosphor bronze, gold plated Copper or brass, nickel or gold plated PTFE Military MIL-C-22557A where applicable Note: These characteristics are typical but may not apply to all connectors. Plug .141 MIN .141 MIN REF PLANE .117 MAX .007 MAX .010 MAX ø.130 MAX .007/.037 .007 MIN 40 SMB REF PLANE .141/.131 .117 MIN ø.244 MAX Jack .065 MIN ø.021/.019 ø.131 MIN .000 MIN .064 MAX .010 MIN .052 MIN Amphenol® RF: 800-627-7100 SMB 50 Ω Cable Connectors Straight Plugs Plating Termination Body Contact Cable Group Part Number Body Contact A 903-287P-51S Gold Gold Crimp Solder A 903-509P-51S Gold Gold Crimp Solder A 903-371P-51S Nickel Gold Crimp Solder A 903-578P-51S Gold Gold Crimp Crimp A 903-578P-51S1 Nickel Gold Crimp Crimp B 903-285P-51S Gold Gold Crimp Solder B 903-370P-51S Nickel Gold Crimp Solder B 903-577P-51S1 Nickel Gold Crimp Crimp B 903-577P-51S Gold Gold Crimp Crimp B2 903-401P-51S Gold Gold Crimp Solder B2 903-579P-51S Gold Gold Crimp Crimp B2 903-579P-51S1 Nickel Gold Crimp Crimp Angle Plugs Cable Group Part Number Plating Body Contact Termination Body Contact A 903-291P-51A Gold Gold Crimp Solder A 903-291P-51A1 Gold Gold Crimp Solder Zinc Diecast Body A 903-368P-51A1 Nickel Gold Crimp Solder B 903-289P-51A Gold Gold Crimp Solder B 903-367P-51A Nickel Gold Crimp Solder B 903-367P-51A2 Nickel Gold Crimp Solder B2 903-369P-51A2 Nickel Gold Crimp Solder Amphenol® RF: 800-627-7100 Description SMB 41 SMB 50 Ω Cable Connectors (continued) Straight Bulkhead Jacks Plating Cable Group Part Number Body Contact B2 B2 L2 Gold Gold Gold Gold Gold Gold 903-505J-51S1 903-505J-51S 903-659J-51S Termination Body Contact Crimp Crimp Solder Solder Solder Solder Angle Bulkhead Jacks Plating Cable Group Part Number Body Contact B B2 B2 Gold Gold Gold Gold Gold Gold 903-422J-51A 903-683J-51A 903-422J-51A2 Termination Body Contact Crimp Solder Crimp Solder Solder Solder 50Ω Receptacles Straight Front Mount Bulkhead Jacks Plating Part Number Body Contact Terminal Type 903-406J-51R 903-402J-51R Gold Gold Gold Gold Solder Cup Blunt Post Angle Front Mount Bulkhead Jacks Plating Part Number Body Contact Terminal Type 903-416J-51R Gold Gold Solder Cup Straight Rear Mount Bulkhead Jacks Plating Part Number Body Contact Terminal Type 903-305J-51R Gold Gold Solder Cup Straight Recessed Mount Bulkhead Jacks Plating 42 Part Number Body Contact Terminal Type 903-407J-51R Gold Gold Solder Cup SMB Amphenol® RF: 800-627-7100 SMB 50Ω Printed Circuit Board Connectors Straight Plugs Part Number Plating Body Contact Terminal Type Description 903-410P-53P Gold Gold Blunt Post For .360” (9mm) Bd. Spacing/Four Legs 903-409J-53P Gold Gold Blunt Post For .360” (9mm) Bd. Spacing/Four Legs Straight Jacks Plating Part Number Body Contact 903-415J-51P Gold Gold Terminal Type Description Blunt Post Four Legs 903-499J-51P2 Gold Gold Blunt Post Four Legs Straight Bulkhead Jacks Plating Part Number Body Contact Terminal Type Description 903-375J-53P Nickel Gold Blunt Post Four Legs 903-518J-51P Gold Gold Blunt Post Four Legs 903-515J-51P Matte Tin Gold Blunt Post Four Legs Angle Bulkhead Jacks Part Number Plating Body Contact 903-413J-51A Gold Gold Blunt Post Four Legs/Leak Tight 903-373J-51A Gold Gold Blunt Post Four Legs/Leak Tight Terminal Type Description Accessories SMB/SMC Accessories: Jam Nuts Part Number Description 903-10408-1 SMB/SMC Gold Plated Nut Hex, Bulk pack version SMB/SMC Accessories: Lockwashers Part Number Description 903-10409-1 SMB/SMC Gold Plated Lockwasher, Bulk pack version Amphenol® RF: 800-627-7100 SMB 43 SMB 75 Ω Cable Connectors Straight Plugs Plating Termination Body Contact Cable Group Part Number Body Contact B 903-502P-71S Nickel Gold Crimp Solder B1 903-152P-71S3 Gold Gold Crimp Solder B1 903-575P-71S Nickel Gold Crimp Solder B1 903-660P-71S Gold Gold Crimp Solder B3 903-574P-71S Nickel Gold Crimp Solder I2 903-152P-71S7 Gold Gold Crimp Solder I2 903-663P-71S Gold Gold Crimp Solder K3 903-152P-71S Gold Gold Crimp Solder Angle Plugs Plating Cable Group Part Number B1 B1 Termination Body Contact Body Contact 903-661P-71A Gold Gold Crimp Solder 903-662P-71A Nickel Gold Crimp Crimp Straight Bulkhead Jacks Plating Cable Group Part Number Body Contact B1 903-108J-71S Gold Gold Termination Body Contact Crimp Solder 75Ω Receptacles Straight Bulkhead Jacks 44 Plating Contact Part Number Body Termination Type Description 903-382J-71R Gold Gold Solder Cup Rear Mount 903-675J-71S Gold Gold Solder Cup Panel Threaded SMB Amphenol® RF: 800-627-7100 SMB 75Ω Printed Circuit Board Connectors Straight Plugs Part Number Body 903-522P-71P Gold Plating Contact Gold Termination Type Blunt Post Description Four Legs, Slide-On Straight Jacks Part Number Body 903-523J-71P Nickel Plating Contact Gold Termination Type Description Blunt Post Four Legs Termination Type Description Angle Jacks Plating Contact Part Number Body 903-585J-71A Nickel Gold Blunt Post Four Legs 903-519J-71P Gold Gold Blunt Post Four Legs Termination Type Description Blunt Post Four Legs Edge Mount Jacks Part Number Body 903-518J-71P Gold Plating Contact Amphenol® RF: 800-627-7100 Gold SMB 45 Cable Group Listing Cable Group Cable Type A B B1 B2 B3 C C1 C2 D E E1 E2 E3 F F1 G1 G2 G3 G4 G5 H H1 H2 H3 I I2 J K K2 K3 L L2 L3 L4 M M1 M2 M3 N N1 N2 N3 P1 P2 P3 P4 46 RG-178, 196 RG-174, 188A, 316, Belden 7805 RG-179, 187, Belden 9221 RD-188/U, RD-316/U RD-179/U, AT&T 19224L2 RG-58, 58A, 58C, 141, 303, LMR195, Belden 7806A, 9907 RG-55, 142, 223, 400 LMR200, Belden 7807A RG-58/U Plenum, Thinnet, RG-122/U, Belden 88240, 89907 RG-59, 62, 140, 210, Belden 8241, 8263, 8279, 9209 RG-59/U 20 AWG center conductor, Belden 1426A, 1505A, 9100, 9278 RD-59/U, Belden 8281, 9141, 9231 RG-59/U Quad Shield, Belden 1152A RG-59/U Plenum, Belden 1560A, 9259, 82259, 89259, 88241 RG-59/U Plenum 20 AWG center conductor, Belden 82108 RG-6, 143, 212 8X, LMR240, Belden 7808A, 9258 LMR400, Belden 7810A, 8214, 9913 RG-8, 8A, 9, 87A, 213, 214, 225, 393 RD-6/U RG-11 Belden 1694A, 9248 Belden 1859A, 7731, 8213, 9292 RG-54A/U AT&T 734A, Belden 1505A AT&T 735A, Belden 735A1 Quad 59 headend cable LMR600 Belden 1695A RG-122, 180, 195, Belden 1855, 1865A, 8218 .141 semi-rigid, RG-402/U .085, .086, .087 semi-rigid, RG-405/U .250 semi-rigid .047 semi-rigid, Belden 1674 1/2 inch annular corrugated 1 1/4 inch annular corrugated 1 5/8 inch annular corrugated 7/8 inch annular corrugated 1/4 Helical 3/8 Helical 1/2 Helical 7/8 inch SFC .81 mm OD micro-cable 1.13 mm OD micro-cable, TCB-068 1.32 mm OD micro-cable 1.37 mm OD micro-cable Cable Group Listing