905-120-5003

Amphenol 905 & 906 SMA Connectors Amphenol Fiber Optics was a pioneer in developing the first industry standard fiber optic interconnect system by introducing the SMA connector. The 905 and 906 series were the first fiber optic interconnect system to gain industry wide acceptance for military, industrial, data communications and medical applications, before fiber was ever used for telephony. Today, Amphenol Fiber Optics continues to support these markets with a wide variety of products that meet the continuing need for the family of SMAs. The SMA connector family utilizes a threaded coupling nut system for mating and de-mating. Available with zirconia or stainless steel ferrules with custom hole sizes, the SMA is an excellent choice for a robust, lowcost and reliable system. Unlike any other connector on the market and as shown on page B-4 of this section, the SMA has a wide range of accessories such as adapters, receptacles, boots, etc. that make it the perfect choice for any sort of experimental or R&D type application. FOC stocks many of these items and can assistant your design. 905 SMA Connector The standard SMA connector with a Stainless Steel ferrule, nickel plated brass knurled coupling nut, black 3mm boot, and a black T-Style dust cap. The following list represents typical stock hole sizes. However, please contact us if you do not see the hole size you are looking for. We may have it or we can have it made for you. Part Number Hole Size Part Number Hole Size 905-150-5001 128um (+5/-0 µm) 905-150-5002 144um (+5/-0 µm) 905-150-5079 150um (+10/-0 µm) 905-150-5058 172um (+10/-0 µm) 905-150-5061 175um (+10/-0 µm) 905-150-5074 200um (+10/-0 µm) 905-150-5041 206um (+10/-0 µm) 905-150-5008 225um (+10/-0 µm) 905-150-5003 231um (+10/-0 µm) 905-150-5086 240um (+10/-0 µm) 905-150-5009 245um (+10/-0 µm) 905-150-5056 250um (+15/-0 µm) 905-150-5093 260um (+15/-0 µm) 905-150-5040 284um (+15/-0 µm) 905-150-5049 310um (+15/-0 µm) 905-150-5015 330um (+15/-0 µm) 905-150-5082 375um (+15/-0 µm) 905-150-5195-P 420um (+15/-0 µm) 905-150-5192-P 430um (+15/-0 µm) 905-150-5004 436um (+15/-0 µm) 905-150-5098 455um (+15/-0 µm) 905-150-5095 470um (+15/-0 µm) 905-150-5052 480um (+15/-0 µm) 905-150-5064 485um (+15/-0 µm) 905-150-5016 490um (+15/-0 µm) 905-150-5073 521um (+15/-0 µm) 905-150-5153 584um (+15/-0 µm) 905-150-5152 610um (+15/-0 µm) 905-150-5151 625um (+15/-0 µm) 905-150-5172 630um (+15/-0 µm) 905-150-5005 641um (+15/-0 µm) 905-150-5090 672um (+15/-0 µm) 905-150-5158 690um (+15/-0 µm) 905-150-5059 700um (+15/-0 µm) 905-150-5091 710um (+15/-0 µm) 905-150-5084 735um (+15/-0 µm) 905-150-5083 750um (+15/-0 µm) 905-150-5179 820um (+15/-0 µm) 905-150-5170 850um (+15/-0 µm) 905-150-5033 960um (+15/-0 µm) 905-150-5027 1020um (+15/-0 µm) 905-150-5057 1055um (+15/-0 µm) 905-150-5080 1100um (+15/-0 µm) 905-150-5034 1210um (+15/-0 µm) 905-150-5078 1300um (+15/-0 µm) 905-150-5162 1650um (+25/-0 µm) *For a hex nut add ‘-H’ to the end of the part number Specifications may change without notice SMA CONNECTORS & ACCESSORIES / B-1 INTERCONNECT COMPONENTS FOC has the world’s largest and most varied inventory of SMA connectors. If we do not have the hole size you are looking for, we can typically have it drilled out in 2 weeks or less and have production quantities in 6 weeks or less. CONTACT INFO Amphenol 905 & 906 SMA Connectors 905 Ceramic Ferruled SMArt Connector The ceramic ferrule enables the connector to be manufactured with a tighter tolerance than the standard stainless steel ferruled SMA connectors and can be manufacture with any hole size up to 500µm. Part Number Hole Size Part Number Hole Size 905-405-5002 126um (+2/-0 µm) 905-405-5007 128um (+2/-0 µm) 905-400-5002 142um (+2/-0 µm) 905-400-5007 144um (+2/-0 µm) 905 Polymer Bodied SMA Connector INTERCONNECT COMPONENTS Connector body is made of plastic while the rest is made of standard components. The ‘-P’ version is all plastic. Part Number Hole Size Part Number Hole Size 905-149-5001 1050um (+25/-0 µm) 905-149-5001-P 1050um (+25/-0 µm) 906 SMA Connector The same as the 905-150-5xxx series connector except it has a stepped ferrule and a stainless steel hex nut. Part Number Hole Size Part Number Hole Size 905-122-5004 128um (+5/-0 µm) 905-122-5000 144um (+5/-0 µm) 905-122-5014 231um (+10/-0 µm) 906-122-5044 430um (+15/-0 µm) 906-122-5039 641um (+15/-0 µm) 906-122-5031 1000um (+15/-0 µm) Specifications may change without notice SMA CONNECTORS & ACCESSORIES / B-2 Amphenol High Power SMA Connectors High-Power Delivery can cause many problems not found in standard fiber applications. A large amount of heat can be generated if any defects, debri or adhesive happens to get in the path of the light and this heat can cause sever damage the connector, fiber and equipment it is plugged into. To address these problems, Amphenol has developed the following options for their line of High Power 905 SMA Connectors. Damage Resistant - The inner tip of the ferrule is recessed creating a “well” so that nothing makes direct contact with the tip of the fiber. Fiber Grip - A fiber retention system that eliminates the need for epoxies at the fiber/ connector end face. This option also allows the connector to be installed and removed any number of times for re-works and repairs. Beryllium Copper (BrCu) - The standard ferrule is produced from high grade type 303 stainless steel but the damage resistant ferrule is also available in BrCu. BrCu conducts heat very well and acts as a heat sink to aid in the dissipation of heat generated at the fiber end face. • • • • No epoxy needed (Fiber Grip) Large choice of fiber sizes Choice of hex or knurled coupling nut Stainless steel or nickel plated brass • • • • Removable ferrule for reworks (Fiber Grip) Autoclavable Anti-reflective coating upon request Materials designed to meet FDA Class VI requirements 303 Stainless Steel Ferrule 905-151-5XXX Series Damage Resistant High Power 905 SMA Connector High Power 905 SMA Damage Resistant Connector with Stainless Steel Ferrule and 3mm Strain Relief Boot. Replace the XXXX with the Fiber's Cladding Diameter. 905-4XXXX-YYYY Series Fiber Grip High Power 905 SMA Connector High Power 905 SMA Fiber Grip Connector with Stainless Steel Ferrule and 3mm Strain Relief Boot. Replace the XXXX with the Fiber's Cladding Diameter and replace the YYYY with the Buffer Diameter. 905-2XXXX-YYYY Series Damage-Resistant & Fiber Grip High Power 905 SMA Connector High Power 905 SMA Fiber Grip & Damage Resistant Connector with Stainless Steel Ferrule and 3mm Strain Relief Boot. Replace the XXXX with the Fiber's Cladding Diameter and replace the YYYY with the Buffer Diameter. Beryllium Copper Ferrule 905-188-5XXX Series Damage Resistant High Power 905 SMA Connector High Power 905 SMA Damage Resistant Connector with BrCu Ferrule and 3mm Strain Relief Boot. Replace the XXXX with the Fiber's Cladding Diameter. 905-2XXXX-YYYYL Series Damage-Resistant & Fiber Grip High Power 905 SMA Connector High Power 905 SMA Fiber Grip & Damage Resistant Connector with BrCu Ferrule and 3mm Strain Relief Boot. Replace the XXXX with the Fiber's Cladding Diameter and replace the YYYY with the Buffer Diameter. 927-1969 Fiber Grip Assembly Tool Tool required to install the Fiber Grip series, epoxyless high power SMA connector. Specifications may change without notice SMA CONNECTORS & ACCESSORIES / B-3 INTERCONNECT COMPONENTS Features & Benefits CONTACT INFO Email: sales@focenter.com / On the web: www.focenter.com / Telephone: 1-800-IS-FIBER (800) 473-4237 Amphenol 905 & 906 SMA Connector Accessories Ordering Information Part Number Description Adapters 905-120-5000 905/906 SMA Adapter, Metal Body, Bulkhead Feedthrough, D- Hole Mount, Jack-Jack, Nut and Washer 905-120-5003 905/906 SMA Adapter, Metal Body, In-Line, Jack-Jack, 2 Nuts and 2 Washers 905-120-5004 905/906 SMA Adapter, Metal Body, Half Length, Jack-Jack, Nut and Washer 905-120-5008 905/906 SMA Environmentally Sealed Adapter, Metal Body, Bulkhead Feedthrough, D- Hole Mount, Jack-Jack, Nut and Washer 905-120-5016 905/906 SMArt Adapter, Metal Body, Bulkhead Feedthrough, D- Hole Mount, Jack-Jack, Nut and Washer INTERCONNECT COMPONENTS Device Receptacles 905-117-5000 905/906 SMA Device Receptacle, Flange Mount, TO-5 Can or Insert 905-118-5000 905/906 SMA Device Receptacle, Screw Mount, TO-5 Can or Insert 905-138-5002 905-145-5000 905/906 SMA Device Receptacle, Screw or Bulkhead Mount, TO-18, TO-46 or SE 4352 Can, Key-Way, Can Alignment Sleeve, Nut and Washer 905/906 SMA Device Receptacle, Bulkhead Mount, TO-18, TO-46 or SE 4352 Can, Key-Way, Can Alignment Sleeve, Nut and Washer Connector Boots 905-5100 SMA 3mm Black Strain Relief Boot 905-5215-P SMA 900um to 3mm Adjustable Black Strain Relief Boot with Membrane 905-5217-P SMA 3mm Black Strain Relief Boot. Med Class VI Connector Dust Caps 905-5058-6 SMA Connector Black Straight Dust Cap 905-5173-01 SMA Connector Black T-Style Dust Cap 905-5173-02 SMA Connector Black T-Style Dust Cap With Outgassing Slit 905-5173-12 SMA Connector Black T-Style Dust Cap with Tie and Outgassing Slit 905-5196-00 Class VI Medical SMA Connector White T-Style Dust Cap with Tie and Outgassing Slit Adapter / Receptacle Dust Caps 905-163 SMA Adapter / Receptacle Metal Dust Cap & Chain 905-5093 SMA Adapter / Receptacle Red Polymer Dust Cap Connector Replacement Parts 905-5191 Nickle Plated Brass Knurled Nut 905-9190 Stainless Steel Knurled Nut 905-5169 Plastic Knurled Nut 905-5080-C Stainless Steel Hex Nut 905-5085-1 Straight Crimp 905-5152 Stepped (Milk-Bottle) Crimp 905-5083 SMA Connector C-Clip Adapter / Receptacle Replacement Parts 906-101-3002 905 to 906 1/2 Length Sleeve 906-101-3003 906 to 906 Full Length Sleeve 905-5092 SMA Adapter Lockwasher 905-5008-2 TO-5 to 0.196” ID Receptacle Insert Specifications may change without notice SMA CONNECTORS & ACCESSORIES / B-4