908-41300

Amphenol® Assembly Instructions-C70 MMCX (continued) STRAIGHT CONNECTORS FOR FLEXIBLE CABLE a b Ferrule c Contact Hex Crimp Data Amphenol Connector Cable Number Type RG-/U Connector Body Stripping Dimensions, inches (mm) CTL Series Tool No. CTL-13 d e f 908-41200 Straight Plug RG-178, 196 .170 (4.32) .300 (7.62) .360 (9.14) 908-41300 Straight Plug RG-174, 188, 316 .128 (3.25) CTL-13 .170 (4.32) .325 (7.62) .365 (8.64) 908-41500 Straight Plug RD-316 .151 (3.84) CTL-13 .170 (4.32) .325 (7.62) .365 (8.64) 908-42300 Straight Jack RG-174, 188, 316 .128 (3.25) CTL-13 .170 (4.32) .325 (7.62) .365 (8.64) 908-42500 Straight Jack RD-316 .151 (3.84) CTL-13 .170 (4.32) .325 (7.62) .365 (8.64) f e Step 1 Prepare cable according to diagram. Do not damage braid and inner conductor of cable. Slide crimp ferrule “a” over the braid. Step 2 Solder contact “b” to the center conductor of the cable. Contact must butt on the dielectric of the cable as shown. Step 3 Flare braid and insert contact into body assembly “c”. Contact must bottom in insulator resulting in a dimension of .006 ±.007 from the tip of the contact to the end of the body. Crimp ferrule using the appropriate hex dies. d CONTACT MUST BUTT HERE Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 335 Assembly Cavity for Outer Ferrule .105 (2.67)