908-43300

Amphenol® Assembly Instructions-C72 MMCX RIGHT ANGLE CONNECTORS FOR FLEXIBLE CABLE a b Ferrule Amphenol Number c Connector Body Connector Type Cable RG-/U Cap Hex Crimp Data Stripping Dimensions, inches (mm) Cavity for Outer Ferrule .105 (2.67) CTL Series Tool No. CTL-13 d e .170 (4.32) .235 (5.97) .285 (7.24) f Right Angle Plug RG-178, 196 908-43300 Right Angle Plug RG-174, 188, 316 .128 (3.25) CTL-13 .170 (4.32) .235 (5.97) .285 (7.24) 908-43500 Right Angle Plug RD-316 .151 (3.84) CTL-13 .170 (4.32) .235 (5.97) .285 (7.24) f e d Step 1 Prepare cable according to diagram. Do not damage braid and inner conductor of cable. Slide crimp ferrule “a” over the braid. Step 2 Flare braid and insert into body. Slide crimp ferrule over body and crimp the ferrule using appropriate crimp tool and die cavity. Step 3 Solder inner conductor to contact (Sn 60 recommended). Place cap “c” on rear opening of body “b”. Press cap “c” into housing “b” with a flat punch or tool #90850100. BRAID AND DIELECTRIC CRIMP ZONE SOLDER Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 337 Assembly 908-43200