®
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
12-170-2
This catalog has been specifically designed to
assist in the critical process of selecting
the right cylindrical connector for a printed circuit
board application.
Contact arrangements have been carefully
selected to guide designers to the most
commonly available and widely used
insert patterns.
Pin-out location illustrations of these
contact insert patterns are shown first,
followed by connector shell drawings in
three series:
MIL-DTL-38999, MIL-C-26482, MIL-5015.
Proven & reliable cylindrical
connector solutions for PC
board attachment:
MIL-DTL-38999, MIL-C-26482
and MIL-5015, with a wide
range of contact
arrangements and options
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol
For more information on the wide
variety of PC tail contacts that are
offered by Amphenol, see catalog 12-130,
High Frequency Contacts, which also
includes coax, twinax, triax and quadrax
shielded contacts.
17
10
25 32
4
40
1
47
53
55
52
3
9
16
24
31
39
46
®
Amphenol Cylindrical Connectors
for Printed Circuit Board Applications
12-170-2
This catalog has been specifically designed to
assist in the critical process of selecting
the right cylindrical connector for a printed circuit
board application.
Contact arrangements have been carefully
selected to guide designers to the most
commonly available and widely used
insert patterns.
Pin-out location illustrations of these
contact insert patterns are shown first,
followed by connector shell drawings in
three series:
MIL-DTL-38999, MIL-C-26482, MIL-5015.
Proven & reliable cylindrical
connector solutions for PC
board attachment:
MIL-DTL-38999, MIL-C-26482
and MIL-5015, with a wide
range of contact
arrangements and options
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Avenue, Sidney, New York 13838-1395
Phone: 800-678-0141 or 607-563-5011 Fax: 607-563-5157
www.amphenol-aerospace.com
Amphenol
For more information on the wide
variety of PC tail contacts that are
offered by Amphenol, see catalog 12-130,
High Frequency Contacts, which also
includes coax, twinax, triax and quadrax
shielded contacts.
17
10
25 32
4
40
1
47
53
55
52
3
9
16
24
31
39
46
Table of Contents
Amphenol® Cylindrical Connectors
for Printed Circuit Board Applications
Page
Introduction .............................................................................. 1
Amphenol has earned the
reputation as the leader in the
military electrical connection arena.
Amphenol’s interconnects meet
almost any aerospace and ground
vehicle design need as well as
many industrial needs.
Guide to Selecting a PCB Cylindrical Connector .................. 2, 3
Insert Availability ...................................................................... 4
Insert Arrangment Drawings ................................................ 5-24
Alternate Positioning ......................................................... 25-26
MIL-DTL-38999, Series I (LJT) Shell Styles ...................... 27-31
MIL-DTL-38999, Series II (JT) Shell Styles ....................... 32-34
MIL-DTL-38999, Series III (Tri-Start) Shell Styles ............. 35-39
Stand-off Adapter for use with MIL-DTL-38999
PCB Connectors ..................................................................... 40
MIL-C-26482, Series 1 (PT) Shell Styles .......................... 41, 42
MIL-5015 (MS3102) Shell Style .............................................. 43
Universal Header Assemblies for use with
Flex print or PCB Connectors ........................................... 44, 45
Additional Products – Rectangular, for PCB Application ... 46-48
Amphenol Sales Office and Distributor Listing
If more information is needed concerning the products in this publication, or if you have any special application needs, please contact your
nearest Amphenol sales office or Amphenol Corporation at the
following address:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave., Sidney, NY 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
See this catalog and the majority of catalogs of Amphenol Aerospace
and Amphenol Industrial Interconnection Products at:
www.amphenol-aerospace.com
Amphenol operates quality systems that are certified to ISO9001:2000
by third party registrars.
Table of Contents
Amphenol® Cylindrical Connectors
for Printed Circuit Board Applications
Page
Introduction .............................................................................. 1
Amphenol has earned the
reputation as the leader in the
military electrical connection arena.
Amphenol’s interconnects meet
almost any aerospace and ground
vehicle design need as well as
many industrial needs.
Guide to Selecting a PCB Cylindrical Connector .................. 2, 3
Insert Availability ...................................................................... 4
Insert Arrangment Drawings ................................................ 5-24
Alternate Positioning ......................................................... 25-26
MIL-DTL-38999, Series I (LJT) Shell Styles ...................... 27-31
MIL-DTL-38999, Series II (JT) Shell Styles ....................... 32-34
MIL-DTL-38999, Series III (Tri-Start) Shell Styles ............. 35-39
Stand-off Adapter for use with MIL-DTL-38999
PCB Connectors ..................................................................... 40
MIL-C-26482, Series 1 (PT) Shell Styles .......................... 41, 42
MIL-5015 (MS3102) Shell Style .............................................. 43
Universal Header Assemblies for use with
Flex print or PCB Connectors ........................................... 44, 45
Additional Products – Rectangular, for PCB Application ... 46-48
Amphenol Sales Office and Distributor Listing
If more information is needed concerning the products in this publication, or if you have any special application needs, please contact your
nearest Amphenol sales office or Amphenol Corporation at the
following address:
Amphenol Corporation
Amphenol Aerospace
40-60 Delaware Ave., Sidney, NY 13838-1395
Phone: 800-678-0141 or 607-563-5011
Fax: 607-563-5157
See this catalog and the majority of catalogs of Amphenol Aerospace
and Amphenol Industrial Interconnection Products at:
www.amphenol-aerospace.com
Amphenol operates quality systems that are certified to ISO9001:2000
by third party registrars.
Amphenol ®Cylindrical Connectors
for Printed Circuit Board Applications
Amphenol provides three popular connector series with PC tail contacts. The following key
points give a quick overview of these series. For more detail, there are series catalogs available as listed below*. Go to www.amphenol-aerospace.com to view and download these
catalogs. There is a guide to selecting a cylindrical connector with printed circuit board contacts on the following page to assist you further.
MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE
•
•
•
•
•
Lightweight, compact, high density and high reliability cylindrical
Operating voltage to 900 VAC (RMS) at sea level
Environmentally resistant
Solder or crimp rear release contacts in mating plug
Series I (LJT) - Bayonet coupling
• Scoop-proof (recessed pins) offers maximum contact
protection
• Series II (JT) - Bayonet coupling
• For applications requiring maximum weight/space
savings and reliability
• Series III (Tri-Start) - Threaded, quick coupling in one
complete turn
Special 38999 Connector with
• Designed for general duty as well as severe environmental
Stand-off Shell and
PC Tails
applications
• Superior EMI shielding with grounding fingers and
metal-to-metal mating
• Filter/Transient protection versions available
• Scoop-proof contact protection
• Stainless steel firewall versions, and composite versions
38999 Series III Box Mount Connector
with PC Tails
38999 Series III Connector with a Special
Configuration Composite Shell and PC
Tails
MIL-C-26482 CONNECTORS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Series 1 (PT) - Bayonet coupling - most commonly used in PCB
applications
• Environmentally resistant
• Solder or crimp front and rear release contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
26482 Series 1 Jam Nut
Connector with PC Tails
5015 Box Mount Connector
with PC Tails
MIL-5015 CONNECTORS
•
•
•
•
•
•
Medium–heavy weight, time-tested cylindrical
Operating voltage to 1,500 VAC (RMS) at sea level
Environmentally resistant or general duty
Threaded coupling
Solder or crimp rear insertion contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
Also provided in this catalog are several additional product options for the
designer of PCB board applications. For example: Amphenol’s flex assemblies
provide solutions for attachment to PCB boards where a self-locking terminal
pad is needed or in tight-fitting space requirements. Connectors with compliant
pin contacts are available, and pc tails within shielded coax, twinax and triax
contacts are available. At the end of the catalog, see a brief description of
Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks
and wiring interface modules.
Go to www.amphenol-aerospace for catalogs online.
11
Flex Termination with MIL-C-26482 Special Connector
* Request Catalog 12-090 for MIL-DTL-38999 Series I, II
Request Catalog 12-092 for MIL-DTL-38999 Series III
Request Catalog 12-070 for MIL-C-26482, Series 1, 2
Request Catalog 12-071 for Matrix MIL-C-26482 Series 2
Request Catalog 12-020 for MIL-5015
Note: MIL-DTL-38999 supersedes MIL-C-38999.
Amphenol ® Cylindrical Connectors
for Printed Circuit Board Applications
Amphenol provides three popular connector series with PC tail contacts. The following key
points give a quick overview of these series. For more detail, there are series catalogs available as listed below*. Go to www.amphenol-aerospace.com to view and download these
catalogs. There is a guide to selecting a cylindrical connector with printed circuit board contacts on the following page to assist you further.
MIL-DTL-38999 CONNECTORS, METAL & COMPOSITE
•
•
•
•
•
Lightweight, compact, high density and high reliability cylindrical
Operating voltage to 900 VAC (RMS) at sea level
Environmentally resistant
Solder or crimp rear release contacts in mating plug
Series I (LJT) - Bayonet coupling
• Scoop-proof (recessed pins) offers maximum contact
protection
• Series II (JT) - Bayonet coupling
• For applications requiring maximum weight/space
savings and reliability
• Series III (Tri-Start) - Threaded, quick coupling in one
complete turn
Special 38999 Connector
• Designed for general duty as well as severe environmental
with Stand-off Shell and
PC Tails
applications
• Superior EMI shielding with grounding fingers and
metal-to-metal mating
• Filter/Transient protection versions available
• Scoop-proof contact protection
• Stainless steel firewall versions, and composite versions
38999 Series III Box Mount Connector
with PC Tails
38999 Series III Connector with a
Special Configuration Composite
Shell and PC Tails
MIL-C-26482 CONNECTORS
• Medium size, widely used cylindrical
• Operating voltage to 1,000 VAC (RMS) at sea level
• Series 1 (PT) - Bayonet coupling - most commonly used in PCB
applications
• Environmentally resistant
• Solder or crimp front and rear release contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
26482 Series 1 Jam Nut
Connector with PC Tails
5015 Box Mount Connector
with PC Tails
MIL-5015 CONNECTORS
•
•
•
•
•
•
Medium–heavy weight, time-tested cylindrical
Operating voltage to 1,500 VAC (RMS) at sea level
Environmentally resistant or general duty
Threaded coupling
Solder or crimp rear insertion contacts in mating plug
Black/green zinc alloy plating (cadmium-free) available
Also provided in this catalog are several additional product options for the
designer of PCB board applications. For example: Amphenol’s flex assemblies
provide solutions for attachment to PCB boards where a self-locking terminal
pad is needed or in tight-fitting space requirements. Connectors with compliant
pin contacts are available, and pc tails within shielded coax, twinax and triax
contacts are available. At the end of the catalog, see a brief description of
Amphenol PCB rectangular connectors, backplane assemblies, terminal blocks
and wiring interface modules.
Go to www.amphenol-aerospace for catalogs online.
11
Flex Termination with MIL-C-26482 Special
Connector
* Request Catalog 12-090 for MIL-DTL-38999 Series I, II
Request Catalog 12-092 for MIL-DTL-38999 Series III
Request Catalog 12-070 for MIL-C-26482, Series 1, 2
Request Catalog 12-071 for Matrix MIL-C-26482 Series 2
Request Catalog 12-020 for MIL-5015
Note: MIL-DTL-38999 supersedes MIL-C-38999.
Guide to Selecting a PCB Cylindrical
Connector
The connector selection process is one of the most important engineering decisions to be made in any electronic application. Amphenol has created this catalog specifically to provide the necessary information to select, layout and
design both the appropriate Amphenol® cylindrical connector with PCB contacts and the connector footprint (contact locations) on the printed circuit
board. The guide that follows is for application of cylindrical connectors on rigid
printed circuit boards and also applies if a flex print assembly or other optional
is being used.
Engineers working on those PCB or flex print applications requiring rectangular
connectors are encouraged to refer to page 46-48 and ask for Amphenol Rectangular Product catalogs.
How To Select a Cylindrical Connector for a PCB Application
The data provided in this catalog is based on three cylindrical connector series:
MIL-DTL-38999 Series I, II and III, MIL-C-26482 Series 1, and MIL-C-5015.
See page 1 for electrical and environmental features and differences of these
three series. The “hot” side of the application determines the choice of pin or
socket genders of the contacts.
How to Measure the PCB Tail Length
The tail length of the PCB is the portion of the contact that extends beyond the
rear of the shell. This length will vary in relationship to the mounting flange,
depending on the series of connector selected. Standard lengths are shown on the connector shell style
drawings in this
catalog. These shell style drawing pages also provide how to order part numbering for standard PCB cylindrical connectors.
When computing the desired tail length, it is important to take into consideration the following factors:
• The connector series and shell style.
• The mounting style of the receptacle; jam nut (D hole) or panel mount (four holes).
This can affect the overall length of the tail.
• The extension of the tail beyond the opposite side of the board or the flex.
• The space required to adequately clean flux from between the board or flex and the rear
of the connector shell. Connectors that are mounted flush against the board may trap
soldering flux which could lead to corrosion of the solder joints.
Would Alignment Discs, Headers or
Special Stand-off Shells be Beneficial?
Any mechanical methods needed to stabilize the
board or flex to the connector and/or the panel.
The PCB tails shown in this catalog are of one
diameter. Stepped tails or PCB tails with an
increased diameter on a designated portion may
be required for certain applications.
Alignment discs are available which provide ease
of alignment of pins to boards, protection during
shipment and optimized electrical circuit separation. Header assemblies (see pages 44 & 45) are
available which provide time and cost saving
potentials. Standoffs may be required for certain
applications. Amphenol has developed a new
stand-off adapter (see page 40) which may eliminate the need for special stand-off shell designs.
Connectors with clinch nuts can be provided.
Please call Amphenol to discuss any optional
designs or any special requirements.
Stand-off Adapter on a Jam Nut
Receptacle.
Special Design with Longer PC
Tails in a 38999 Composite Shell
Connector. Also shows an Alignment Disc.
2
Universal Header Assemblies are available for Flex Print/PC Board Mounting.
Beneficial especially when electrical
testing of the connector requires it to be
removed and reattached.
Guide to Selecting a PCB Cylindrical
Connector, cont.
What Determines the Diameter of the PCB Tail?
The outside diameter of the PCB tail is determined by the inside diameter of the plated through-hole on
the board or flex print. The standard or most popular diameters are shown in the chart on the next page
and are called out in the connector illustrations in this catalog.
Standard diameters of PCB tails
Connector Series
MIL-DTL-38999
Size 16 Contact
Size 20 Contact
Size 22D Contact
.062 ±.001
.019 ±.001
.019 ±.001
MIL-C-26482
.030 ±.001
.030 ±.001
Not available
MIL-5015
.030 ±.001
Not available
Not available
For availability of other contact diameters, consult Amphenol, Sidney NY.
Should PCB Tails be Gold Plated or Pre-tinned?
The standard PCB tails for MIL-DTL-38999 and MIL-C-26482 receptacles
have gold plating, .00050 inches over nickel. PCB tails for MIL-C-5015
receptacles are plated with silver, .00010 inches over copper. Amphenol
can substitute a pre-tinned version of these tails to facilitate the termination
process. This pre-tinning is a 60/40 lead-tin alloy. Call Amphenol for further
information on pre-tinning and any other plating of contacts not covered in
this catalog.
Would Flex Assemblies be Necessary or Beneficial for the
Application?
Flex print can radically simplify the assembly of a connector to a system, as
well as eliminate wiring errors. Amphenol offers connector flex assemblies
through ACT, Advanced Circuit Technologies division. Features and benefits of using flex technology include:
• Available for MIL-DTL-38999 (including filter EMI/EMP types),
MIL-5015 and MIL-C-26482 cylindrical connectors
• Sculptures® Flexible Circuits with built-in terminations
• Eliminates failures associated with crimped or solder-on contacts
• Geometrically fit tight space requirements and create a self-locking
terminal pad
Flex Termination for Attachment to PC Boards
Should Other PC Tail Contact Types be Considered?
Press-Fit Connectors with compliant pins are available which engage
the plated through-holes in the board without the need for soldering.
This optional contact style offers the following benefits:
• Improved board processing time
• Excellent temperature performance
• Ideal for low-lead applications
For more information on Press-Fit connectors with compliant pins refer
to Amphenol data sheet #188.
Special Quadrax contacts have been designed with PC tails. Coax, twinax and triax contacts can also have PC tails. Refer to Amphenol catalog 12-130. Go online at www.amphenol-aerospace.com or consult
Amphenol Aerospace for further information.
3
Compliant Pin Contacts in a
Bayonet 38999 Catalog
Quadrax PC Tail Contacts
Combined with Standard PC
Tail Contacts
Quadrax Contacts with PC
Tails in a 38999 Connector
with Special Stand-off Shell
Cylindrical Connectors with PCB contacts
insert availability
The following table lists the most commonly used insert arrangements for printed circuit board application of
MIL-DTL-38999, MIL-C-26482 and MIL-C-5015 cylindrical connectors. This represents the most readily available patterns within these series. See illustrations of these selected patterns on the following pages. If you
require other arrangements than what are shown here, consult Amphenol for further availability.
MIL-DTL-38999
JT
Series II
LJT
Series I
Contact Size*
Tri-Start
Series III
MIL-C-26482
MIL-5015
8-3
Service
Rating
Total
Contacts
M/I
3
M
6
I
3
22D
20
8-3
9-3
8-35
9-35
9-35
8-98
9-98
9-98
8-98
A
3
10-5
11-5
11-5
10-5
I
5
5
10-6
I
6
6
M
13
II
3
10SL-3
11-6
10-35
11-35
12-3
13-3
12-35
13-35
11-35
12-3
12-10
13-35
14S-6
I
10
M
22
Inst.
6
3
6
3
3
13
3
10
22
6
14-18
15-18
15-18
14-18
I
18
18
14-19
15-19
15-19
14-19
I
19
19
14-35
15-35
15-35
M
37
16-26
17-26
17-26
16-35
17-35
17-35
18-11
19-11
19-11
18-11
18-32
16S-1
16-26
18-1
18-32
19-32
19-32
18-35
19-35
19-35
20-11
20-27
21-27
20-35
21-35
21-35
20-27
20-41
21-41
21-41
20-41
22-14
22-35
23-35
23-35
22-55
23-55
23-55
24-31
22-55
25-35
25-35
24-61
25-61
25-61
37
A
7
I
26
M
55
A/Inst.
10
10
II
11
11
I
32
M
66
Inst.
13
I
27
M
79
I
41
A
19
M
100
7
26
55
32
66
13
27
79
41
19
100
I
55
24-5
A
16
16
24-28
Inst.
24
24
24-31
24-35
16
24-61
28-15
* For information on size 12 PC tail contacts consult Amphenol Aerospace.
4
I
31
M
128
I
61
A
35
55
31
128
61
35
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #8-3 / 9-3
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
8-3
9-3
MIL-C-26482
Series 1 & 2
MIL-5015
8-3
NA
NA
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating*
3
20
M/I
.018
.079
C
A
B
.056
*Service Rating: M for MIL-DTL-38999
I for MIL-C-26482
.056
Insert Arrangement #8-35 /9-35
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
8-35
9-35
Contact Locations
Front face of pin insert shown
MIL-C-26482
Series 1 & 2
MIL-5015
NA
NA
9-35
Number of
Contacts
Contact
Size
Service
Rating
6
22D
M
.045
.078
.045
1
5
4
6
2
3
.090
.078
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
5
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #8-98 / 9-98
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
8-98
9-98
MIL-C-26482
Series 1 & 2
MIL-5015
8-98
NA
9-98
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
3
20
I
.038
.075
A
C
B
.065
.065
Insert Arrangement #10SL-3
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
NA
10SL-3
NA
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
3
16
A
.053
C
A
B
.105
.091
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
6
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #10-5 / 11-5
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
10-5
11-5
MIL-C-26482
Series 1 & 2
MIL-5015
10-5
NA
11-5
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
5
20
I
.065
.065
.056
.130
A
E
D
B
C
.065
.113
.113
Insert Arrangement #10-6 / 11-6
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
NA
11-6
NA
Number of
Contacts
Contact
Size
Service
Rating
6
20
I
.130
A
MIL-5015
10-6
NA
Contact Locations
Front face of pin insert shown
F
MIL-C-26482
Series 1 & 2
.065
B
C
E
D
.065
.130
.113
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
7
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #10-35 / 11-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
10-35
11-35
MIL-C-26482
Series 1 & 2
MIL-5015
NA
NA
11-35
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
13
22D
M
.138
.085
.118
.146
.056
.146
9
10 1
11
13
8
2 3
12
4
7
6
5
.045
.045
.035
.118
.049
Insert Arrangement #12-3 / 13-3
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
12-3
13-3
MIL-C-26482
Series 1 & 2
MIL-5015
12-3
NA
NA
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
3
16
II
.058
C
A
B
.111
.094
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
8
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #12-10
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
12-10
NA
NA
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
10
20
I
.065
A
H
K
B
J
C
G
F E
D
.120
.130
.195
Insert Arrangement #12-35 / 13-35
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
12-35
13-35
Contact Locations
Front face of pin insert shown
MIL-C-26482
Series 1 & 2
MIL-5015
NA
NA
13-35
Number of
Contacts
Contact
Size
Service
Rating
22
22D
M
.182
.126
.107
.117
.088
.045
.158
.197
.026
.075
1
21
11
.030
.120
.093
.203
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
9
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #14S-6
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
NA
14S-6
NA
Contact Locations
Front face of pin insert shown
Number of
Contacts
Contact
Size
Service
Rating
6
16
Inst.
A
F
.160
B
E
C
.080
D
.138
Insert Arrangement #14-18 / 15-18
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
14-18
15-18
MIL-5015
14-18
NA
15-18
Contact Locations
Front face of pin insert shown
.260
MIL-C-26482
Series 1 & 2
Number of
Contacts
Contact
Size
Service
Rating
18
20
I
.260
.113
L
K
M
T
J
.252
A
N
B
U
S
P
C
R
H
D
G
F
E
.113
.225
.065
.065
.130
.195
.130
.195
All dimensions for reference only. For alternate rotations see pages 25 & 26
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
10
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #14-19 / 15-19
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
14-19
15-19
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
14-19
NA
19
20
I
15-19
Contact Locations
Front face of pin insert shown
.065
.065
.225
.113
A
M
.113
L
B
N
C
K
U
J
T
H
V
R
D
S
G
E
F
.130
.130
.195
.225
.195
.260
.260
Insert Arrangement #14-35 / 15-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
14-35
Contact Locations
Front face of pin insert shown
1
31
11
21
15-35
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
37
22D
M
15-35
Contact Hole Locations
Location
X Axis
Y Axis
+.045
+.262
+.123
+.217
+.211
+.160
+.254
+.080
+.266
–.010
+.247
–.098
+.200
–.175
+.130
–.232
+.045
–.262
–.045
–.262
–.130
–.232
–.200
–.175
–.247
–.098
–.266
–.010
–.254
+.080
–.211
+.160
–.123
+.217
–.045
+.262
+.045
+.172
+.123
+.119
Contact
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult Amphenol
Corp Sidney NY
11
Contact Hole Locations
Location
X Axis
Y Axis
+.170
+.040
+.170
–.050
+.123
–.127
+.045
–.172
–.045
–.172
–.123
–.127
–.170
–.050
–.170
+.040
–.123
+.119
–.045
+.172
+.045
+.074
+.090
–.004
+.045
–.082
–.045
–.082
–.090
–.004
–.045
+.074
.000
–.004
Contact
Number
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #16S-1
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
16S-1
7
16
A
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
16-26
NA
26
20
I
NA
Contact Locations
Front face of pin insert shown
.095
.165
F
E
A
G
D
B
C
.190
Insert Arrangement #16-26 / 17-26
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
NA
17-26
Contact Locations
Front face of pin insert shown
A
R
P
a
B
T
S
U
b
C
D
N
Z
M
Y
L
V
c
K
J
W
X
H
E
F
G
17-26
Contact Hole Locations
Location
X Axis
Y Axis
.000
+.321
+.131
+.293
+.239
+.214
+.305
+.099
+.319
–.034
+.278
–.161
+.189
–.260
+.067
–.314
–.067
–.314
–.189
–.260
–.278
–.161
–.319
–.034
–.305
+.099
–.239
+.214
Contact
Number
A
B
C
D
E
F
G
H
J
K
L
M
N
P
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp Sidney NY
12
Contact Hole Locations
Location
X Axis
Y Axis
–.131
+.293
–.070
+.177
+.070
+.177
+.175
+.094
+.178
–.036
+.119
–.151
.000
–.203
–.119
–.151
–.178
–.036
–.175
+.094
.000
+.065
.000
–.065
Contact
Number
R
S
T
U
V
W
X
Y
Z
a
b
c
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #16-35 / 17-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
16-35
17-35
Contact Locations
Front face of pin insert shown
17
10
25
32
40
4
1
47
53
55
52
3
9
16
24
31
46
39
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
55
22D
M
17-35
Contact Hole Locations
Location
X Axis
Y Axis
–.312
+.086
–.312
–.004
–.312
–.094
–.242
+.221
–.234
+.131
–.234
+.041
–.234
–.049
–.234
–.139
–.234
–.229
–.172
+.279
–.156
+.176
–.156
+.086
–.156
–.004
–.156
–.094
–.156
–.184
–.156
–.274
–.089
+.316
–.078
+.221
–.078
+.131
–.078
+.041
–.078
–.049
–.078
–.139
–.078
–.229
–.078
–.319
.000
+.329
.000
+.176
.000
+.086
.000
–.004
.000
–.094
.000
–.184
.000
–.274
Contact
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
13
Contact Hole Locations
Location
X Axis
Y Axis
+.089
+.316
+.078
+.221
+.078
+.131
+.078
+.041
+.078
–.049
+.078
–.139
+.078
–.229
+.078
–.319
+.172
+.279
+.156
+.176
+.156
+.086
+.156
–.004
+.156
–.094
+.156
–.184
+.156
–.274
+.242
+.221
+.234
+.131
+.234
+.041
+.234
–.049
+.234
–.139
+.234
–.229
+.312
+.086
+.312
–.004
+.312
–.094
Contact
Number
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #18-1
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating*
NA
18-1
10
16
A/Inst.
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
18-11
NA
11
16
II
NA
Contact Locations
Front face of pin insert shown
.095
A
H
G
I
B
F
J
C
D
E
.240
.240
* Contact Locations B, C, F, G are Service Rating A.
All other contact locations are Service Rating Inst.
.100
Insert Arrangement #18-11 / 19-11
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
18-11
19-11
19-11
Contact Locations
Front face of pin insert shown
.250
.105
.105
.260
.132
J
H
A
B
K
C
G
L
F
D
.092
E
.053
.281
.215
.179
.275
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
Amphenol Corp Sidney NY
14
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #18-32 / 19-32
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
18-32
19-32
T
P
N
C
f
d
W
c
X
h
K
F
Z
a
L
J
E
Y
b
M
D
g
j
Contact
Size
Service
Rating
18-32
NA
32
20
I
Contact Hole Locations
Location
X Axis
Y Axis
+.066
+.353
+.189
+.305
+.286
+.217
+.345
+.098
+.357
–.033
+.321
–.160
+.242
–.265
+.130
–.335
.000
–.359
–.130
–.335
–.242
–.265
–.321
–.160
–.357
–.033
–.345
+.098
–.286
+.217
–.189
+.305
–.066
+.353
.000
+.230
B
V
e
R
Number of
Contacts
Contact
Letter
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
T
U
A
U
MIL-5015
19-32
Contact Locations
Front face of pin insert shown
S
MIL-C-26482
Series 1 & 2
G
H
Contact Hole Locations
Location
X Axis
Y Axis
+.124
+.193
+.209
+.095
+.228
–.033
+.174
–.151
+.065
–.221
–.065
–.221
–.174
–.151
–.228
–.033
–.209
+.095
–.124
+.193
.000
+.096
+.096
.000
.000
–.096
–.096
.000
Contact
Letter
V
W
X
Y
Z
a
b
c
d
e
f
g
h
j
Insert Arrangement #18-35 / 19-35
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
18-35
19-35
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
66
22D
M
19-35
Contact Locations
Front face of pin insert shown
.357
.279
.360
.315
.201
.270
.225
.123
.045
.180
.135
17
4
23 34
43
10
51
58
.090
.045
64
1
3
66
63
9
16
24 33 42 50
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
15
57
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-11
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
20-11
13
16
Inst.
NA
Contact Locations
Front face of pin insert shown
.138
.159
.239
L
C
B
M
E
.102
F
G
H
K
N
A
.080
J
D
.204
.276
.156
Insert Arrangement #20-27 / 21-27
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
20-27
21-27
Contact Locations
Front face of pin insert shown
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
20-27
NA
27
20
I
NA
.400
.275
.225
.125
.100
.150
.225
.275
.375
.400
A
B
R
P
a
N
C
b
T
Z
M
S
d
D
c
Y
U
E
F
L
X
W
K
V
G
J
.400
.300
H
.200
.100
.150
.250
.250
.150
.025
.375
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications. For availability of other arrangements, consult
.050
16
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-35 / 21-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
20-35
21-35
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
79
22D
M
21-35
Contact Hole Locations
Contact Locations
Front face of pin insert shown
Contact Hole Locations
Location
Location
Contact
Number
X Axis
Y Axis
Contact
Number
X Axis
10
+.365
–.227
45
–.332
–.048
11
+.306
–.302
46
–.332
+.048
12
+.232
–.362
47
–.311
+.141
13
+.146
–.404
48
–.258
+.220
14
+.053
–.426
49
–.184
+.280
15
–.053
–.426
50
–.098
+.322
16
–.146
–.404
51
–.048
+.241
17
–.232
–.362
52
+.048
+.241
18
–.306
–.302
53
+.134
+.199
19
–.365
–.227
54
+.208
+.139
20
–.406
–.141
55
+.237
+.048
21
–.427
–.048
56
+.237
–.048
22
–.427
+.048
57
+.208
–.139
23
–.406
+.141
58
+.134
–.199
24
–.365
+.227
59
+.048
–.241
25
–.306
+.302
60
–.048
–.241
26
–.232
+.362
61
–.134
–.199
27
–.146
+.404
62
–.208
–.139
28
–.053
+.426
63
–.237
–.048
29
.000
+.323
64
–.237
+.048
30
+.098
+.322
65
–.208
+.139
31
+.184
+.280
66
–.134
+.199
32
+.258
+.220
67
–.048
+.146
Contact Hole Locations
33
+.311
+.141
68
+.048
+.146
Location
34
+.332
+.048
69
+.125
+.090
1
31
51
79
21
71
61
41
11
Y Axis
Contact
Number
X Axis
Y Axis
35
+.332
–.048
70
+.155
.000
1
+.053
+.426
36
+.311
–.141
71
+.125
–.090
2
+.146
+.404
37
+.258
–.220
72
+.048
–.146
3
+.232
+.362
38
+.184
–.280
73
–.048
–.146
4
+.306
+.302
39
+.098
–.322
74
–.125
–.090
5
+.365
+.227
40
.000
–.347
75
–.155
.000
6
+.406
+.141
41
–.098
–.322
76
–.125
+.090
7
+.427
+.048
42
–.184
–.280
77
.000
+.053
8
+.427
–.048
43
–.258
–.220
78
+.048
–.029
–.141
44
–.311
–.141
79
–.048
–.029
9
+.406
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
17
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #20-41 / 21-41
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
20-41
21-41
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
20-41
NA
41
20
I
21-41
Contact Locations
Front face of pin insert shown
W
V
j
U
C
Y
D
k
g
P
f
p
q
N
L
G
c
d
e
M
F
b
n
E
a
t
r
R
Z
m
s
h
S
B
X
i
T
A
H
J
K
.300 DIA.
.567 DIA.
.835 DIA.
Insert Arrangement #22-14
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
Contact Locations
Front face of pin insert shown
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
22-14
19
16
A
NA
.392
.196
.336
M
L
J
N
U
K
H
C
R
S
G
B
P
V
T
A
D
.168
F
E
.098
.294
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
18
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #22-35 / 23-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
22-35
23-35
Contact Locations
Front face of pin insert shown
25 35
16
46
56
67
77
8
86
1
94
2
95
96
3
97
4
98
5
99
6
7
100
15
93
24
34
45
55
85
66 76
Contact Hole Locations
Location
X Axis
Y Axis
–.428
+.241
–.467
+.154
–.488
+.061
–.415
.000
–.488
–.061
–.428
–.142
–.428
–.237
–.332
+.333
–.332
+.238
–.332
+.143
–.332
+.048
–.332
–.047
–.332
–.142
–.332
–.237
–.332
–.332
–.249
+.380
–.249
+.285
–.249
+.190
Contact
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
100
22D
M
23-35
Contact Hole Locations
Location
X Axis
Y Axis
–.249
+.095
–.249
.000
–.249
–.095
–.249
–.190
–.249
–.285
–.249
–.380
–.166
+.428
–.166
+.333
–.166
+.238
–.166
+.143
–.166
+.048
–.166
–.047
–.166
–.142
–.166
–.237
–.166
–.332
–.166
–.427
–.083
+.475
–.083
+.380
–.083
+.285
–.083
+.190
–.083
+.095
–.083
.000
–.083
–.095
–.083
–.190
–.083
–.285
–.083
–.380
–.083
–.475
.000
+.428
.000
+.333
.000
+.238
.000
+.143
.000
+.048
.000
–.047
.000
–.142
.000
–.237
.000
–.332
.000
–.427
+.083
+.475
+.083
+.380
+.083
+.285
+.083
+.190
+.083
+.095
Contact
Number
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
19
Contact Hole Locations
Location
X Axis
Y Axis
+.083
.000
+.083
–.095
+.083
–.190
+.083
–.285
+.083
–.380
+.083
–.475
+.166
+.428
+.166
+.333
+.166
+.238
+.166
+.143
+.166
+.048
+.166
–.047
+.166
–.142
+.166
–.237
+.166
–.332
+.166
–.427
+.249
+.380
+.249
+.285
+.249
+.190
+.249
+.095
+.249
.000
+.249
–.095
+.249
–.190
+.249
–.285
+.249
–.380
+.332
+.333
+.332
+.238
+.332
+.143
+.332
+.048
+.332
–.047
+.332
–.142
+.332
–.237
+.332
–.332
+.428
+.241
+.467
+.154
+.488
+.061
+.415
.000
+.488
–.061
+.428
–.142
+.428
–.237
Contact
Number
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #22-55 / 23-55
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
22-55
23-55
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
22-55
NA
55
20
I
23-55
Contact Locations
Front face of pin insert shown
.325
.260
A
U
T
S
R k
.390
P
j
i
N
.130
p
.455
q
AA
z
GG
y
FF
w
h
M
C
X Y
D
r
BB
CC
Z E
HH
s
a F
DD
t
EE
b
u
v
c
G
d
e
H
J
W
m
x
B
V
n
g
f
L
K
.195
.065
.112
.225
.336
.450
Insert Arrangement #24-5
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
24-5
16
16
A
NA
Contact Locations
Front face of pin insert shown
.035
.067
.238
.137
A
B
C
E
D
G
F
H
K
J
L
N
M
R
P
.168
S
.270
.371
.352
.176
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
20
.340
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-28
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
24-28
24
16
Inst.
NA
Contact Locations
Front face of pin insert shown
.356
.178
.089
.308
B
A
E
F
L
K
W
P
N
T
S
R
J
H
G
M
Y
Q
V
U
X
.154
D
C
Z
.267
.445
Insert Arrangement #24-31 / 25-31
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
24-31
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
24-31
NA
31
16
I
NA
Contact Locations
Front face of pin insert shown
M
L
A
N
Z
.455
a
Y
c
d
W
H
D
S
V
T
U
G
C
R
e
J
.273
.091
b
g
X
E
F
.158
.316
.474
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
.364
Q
f
K
B
P
21
.182
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-35 / 25-35
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
24-35
25-35
Contact Locations
Front face of pin insert shown
48
59
71
25 36
82
15
8
94
105115
1
125
4
7
121
14
24
35
47 58
70
114
81
93
104
Contact Hole Locations
Location
X Axis
Y Axis
–.479
+.279
–.520
+.190
–.546
+.095
–.555
.000
–.546
–.095
–.520
–.190
–.479
–.279
–.424
+.357
–.415
+.190
–.415
+.095
–.415
.000
–.415
–.095
–.415
–.190
–.424
–.357
–.332
+.444
–.332
+.332
–.332
+.237
–.332
+.142
–.332
+.047
–.332
–.047
–.332
–.142
–.332
–.237
–.332
–.332
–.332
–.427
–.249
+.496
–.249
+.380
–.249
+.285
Contact
Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
NA
128
22D
M
25-35
Contact Hole Locations
Location
X Axis
Y Axis
–.249
+.190
–.249
+.095
–.249
.000
–.249
–.095
–.249
–.190
–.249
–.285
–.249
–.380
–.249
–.475
–.160
+.531
–.166
+.427
–.166
+.332
–.166
+.237
–.166
+.142
–.166
+.047
–.166
–.047
–.166
–.142
–.166
–.237
–.166
–.332
–.166
–.427
–.166
–.522
–.083
+.475
–.083
+.380
–.083
+.285
–.083
+.190
–.083
+.095
–.083
.000
–.083
–.095
–.083
–.190
–.083
–.285
–.083
–.380
–.083
–.475
.000
+.522
.000
+.427
.000
+.332
.000
+.237
.000
+.142
.000
+.047
.000
–.047
.000
–.142
.000
–.237
.000
–.332
.000
–.427
.000
–.555
+.083
+.475
+.083
+.380
+.083
+.285
+.083
+.190
+.083
+.095
+.083
.000
+.083
–.095
Contact
Number
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for
PCB applications For availability of other arrangements consult
22
Contact Hole Locations
Location
X Axis
Y Axis
+.083
–.190
+.083
–.285
+.083
–.380
+.083
–.475
+.160
+.531
+.166
+.427
+.166
+.332
+.166
+.237
+.166
+.142
+.166
+.047
+.166
–.047
+.166
–.142
+.166
–.237
+.166
–.332
+.166
–.427
+.166
–.522
+.249
+.496
+.249
+.380
+.249
+.285
+.249
+.190
+.249
+.095
+.249
.000
+.249
–.095
+.249
–.190
+.249
–.285
+.249
–.380
+.249
–.475
+.332
+.444
+.332
+.332
+.332
+.237
+.332
+.142
+.332
+.047
+.332
–.047
+.332
–.142
+.332
–.237
+.332
–.332
+.332
–.427
+.424
+.357
+.415
+.190
+.415
+.095
+.415
.000
+.415
–.095
+.415
–.190
+.424
–.357
+.479
+.279
+.520
+.190
+.546
+.095
+.555
.000
+.546
–.095
+.520
–.190
+.479
–.279
Contact
Number
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #24-61 / 25-61
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Connector Type:
Insert Designation:
24-61
25-61
Y
X
u
A
v
GG HH
W t
FF
B
b
c
C
w
x
d
D
NN JJ
e E
PP
y
EE
KK
MM
U r
F
f
LL
T
G
g
q
z
DD
BB
CC
AA h
S
H
p
J
R
i
k j
P
m
K
N
L
M
V s
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
24-61
NA
61
20
I
25-61
Contact Hole Locations
Contact Locations
Front face of pin insert shown
Z
a
MIL-C-26482
Series 1 & 2
Contact Hole Locations
Location
Location
Contact
Number
X Axis
Y Axis
Contact
Number
X Axis
Y Axis
A
+.196
+.500
h
+.341
–.213
B
+.314
+.435
i
+.251
–.314
C
+.413
+.343
j
+.133
–.379
D
+.485
+.230
k
.000
–.402
E
+.527
+.101
m
–.133
–.379
F
+.536
–.030
n
–.251
–.314
G
+.511
–.164
p
–.341
–.213
H
+.454
–.287
q
–.392
–.088
J
+.368
–.391
r
–.399
+.046
K
+.259
–.470
s
–.362
+.175
L
+.134
–.519
t
–.285
+.283
+.363
M
.000
–.537
u
–.173
N
–.134
–.519
v
.000
+.338
P
–.259
–.470
w
+.147
+.223
R
–.368
–.391
x
+.237
+.122
S
–.454
–.287
y
+.267
–.010
T
–.511
–.164
z
+.228
–.139
U
–.536
–.030
AA
+.131
–.233
V
–.527
+.101
BB
.000
–.267
W
–.485
+.230
CC
–.131
–.233
X
–.413
+.343
DD
–.228
–.139
Y
–.314
+.435
EE
–.267
–.010
Z
–.196
+.500
FF
–.237
+.122
a
–.068
+.454
GG
–.147
+.223
b
+.068
+.454
HH
.000
+.200
+.094
c
+.173
+.363
JJ
+.105
d
+.285
+.283
KK
+.135
–.041
e
+.362
+.175
LL
.000
–.132
f
+.399
+.046
MM
–.135
–.041
g
+.392
–.088
NN
–.105
+.094
PP
.000
.000
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
23
Cylindrical Connectors with PCB contacts
insert arrangements, cont.
Insert Arrangement #28-15
Connector Type:
JT
LJT
Tri-Start
MIL-DTL-38999 MIL-DTL-38999 MIL-DTL-38999
Series II
Series I
Series III
Insert Designation:
NA
NA
MIL-C-26482
Series 1 & 2
MIL-5015
Number of
Contacts
Contact
Size
Service
Rating
NA
28-15
35
16
A
NA
Contact Locations
Front face of pin insert shown
.552
.460
.368
.276
.092
.229
B
A
C
H
.547
.388
X
L
S
Y
T
N
.089
c
b
g
.070
W
V
U
f
e
d
G
M
a
Z
.407
.509
F
K
J
R
P
E
D
h
.248
j
k
l
m
.106
.184
All dimensions for reference only. For alternate rotations see pages 25 & 26.
Note: Shown in this catalog are the most common insert patterns for PCB applications.
For availability of other arrangements, consult Amphenol Corp., Sidney, NY.
24
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-DTL-38999 connectors
To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrangement, alternate rotations are available as indicated in the accompanying charts.
In MIL-DTL-38999 Series I, II and III connectors the rotation is based on rotating the master key/keyway in the connector shell.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. Only the master key/keyway rotates in the
shell, and the insert always remains in the same position relative to the minor keys. Refer to diagrams below for each connector series.
LJT (MIL-DTL-38999 Series I) KEY/KEYWAY ROTATION
AB ANGLE OF ROTATION (Degrees)
Shell
Size
9
11
13
15
17
19
21
23
25
Normal°
95
95
95
95
95
95
95
95
95
A°
77
81
75
74
77
77
77
80
80
B°
–
67
63
61
65
65
65
69
69
C°
–
123
127
129
125
125
125
121
121
D°
113
109
115
116
113
113
113
110
110
JT (MIL-DTL-38999 Series II) KEY/KEYWAY ROTATION
NORMAL
D C
B A
AB
ROTATION
LETTERS
LJT & JT CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
5 ˚ LJT REF
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of LJT connector receptacle shown)
AB ANGLE OF ROTATION (Degrees)
Shell
Size
8
10
12
14
16
18
20
22
24
Normal°
100
100
100
100
100
100
100
100
100
A°
82
86
80
79
82
82
82
85
85
B°
–
72
68
66
70
70
70
74
74
C°
–
128
132
134
130
130
130
126
126
D°
118
114
120
121
118
118
118
115
115
NORMAL
D C
B A
AB
ROTATION
LETTERS
Pins in
Alternate
Rotations
PA = E
PB = R
PC = W
PD = Y
Sockets in
Alternate
Rotations
SA = F
SB = T
SC = X
SD = Z
Explanation:
Use P at end of part number for pin
contacts in Normal position.
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alternate rotations.
10 ˚ JT REF
Tri-Start (MIL-DTL-38999 Series III) KEY/KEYWAY ROTATION
Shell
Size
9
11, 13,
and 15
17 and
19
21, 23,
and 25
Key & Keyway
Arrangement
Identification Letter
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
N
A
B
C
D
E
AR°
BSC
105
102
80
35
64
91
95
113
90
53
119
51
80
135
49
66
62
79
80
135
49
66
62
79
BR°
BSC
140
132
118
140
155
131
141
156
145
156
146
141
142
170
169
140
145
153
142
170
169
140
145
153
CR°
BSC
215
248
230
205
234
197
208
182
195
220
176
184
196
200
200
200
180
197
196
200
200
200
180
197
DR°
BSC
265
320
312
275
304
240
236
292
252
255
298
242
293
310
244
257
280
272
293
310
244
257
280
272
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of JT connector receptacle shown)
MAIN
KEYWAY
AR ˚
BSC
BR ˚
BSC
DR ˚
BSC
CR ˚
BSC
RELATIVE POSSIBLE POSITION
OF ROTATED MASTER KEYWAY
(front face of Tri-Start connector receptacle shown)
25
TRI-START CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Pins in
Alternate
Rotations
PA = G
PB = I
PC = K
PD = M
PE = R
Sockets in
Alternate
Rotations
SA = H
SB = J
SC = L
SD = N
SE = T
Explanation:
Use P at end of part number for pin
contacts in Normal position.
Use S at end of part number for
socket contacts in Normal position.
Use cross reference letters given in
chart above for alternate rotations.
Cylindrical Connectors with PCB contacts
alternate positioning available
for MIL-C-26482 and MIL-5015 connectors
To avoid cross-plugging problems in applications requiring the use of more than one connector of the same series, size and arrangement, alternate rotations are available as indicated in the accompanying charts.
In MIL-C-26482 and MIL-5015 connectors the rotation is based on rotation of the insert within the connector.
A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The front face of the pin insert is rotated
within the shell in a clockwise direction from the normal shell key. Refer to diagram below for both MIL-C-26482 and MIL-C-5015 connectors.
MIL-C-26482 INSERT ROTATION
Position W
X
–
–
–
145
–
110
110
110
Y
–
–
–
215
–
250
250
250
B
A
Pins in
Sockets in Alternate
Alternate Rotations
Rotations
PW = G
SW = H
PX = I
SX = J
PY = K
SY = L
PZ = M
SZ = N
Degrees
W
–
–
80
70
–
80
80
80
Position Y
MIL-26482 AND MIL-5015
CONNECTORS
ALTERNATE ROTATION CROSS
REFERENCE LETTERS
Insert Rotation
Insert
Arrangement
10SL-3
14S-6
16S-1
18-1
20-11
22-14
24-28
28-15
Position X
RELATIVE POSSIBLE POSITION
OF ROTATED INSERT
(front face of connector receptacle shown)
(MIL-C-26482 and MIL-C-5015)
MIL-5015 INSERT ROTATION
Shell
Size
10
14
16
18
20
22
24
28
A
Z
–
–
270
270
–
338
265
–
288
–
324
A B
Degrees
X
Y
210
–
–
–
151
180
90
180
165
315
–
275
138
222
126
225
144
216
225
255
180
270
B
W
60
–
45
15
30
60
85
45
72
90
90
A
Insert
Arrangement
8-3
8-98
10-5
14-18
14-19
16-26
18-32
20-41
22-36
24-31
24-61
B
Insert Rotation
Shell
Size
8
8
10
14
14
16
18
20
22
24
24
Z
–
–
280
290
–
280
280
280
Explanation:
Use P at end of part number for pin contacts in
Normal position.
Use S at end of part number for socket contacts in Normal position.
Use cross reference letters given in chart
above for inserts with alternate rotations.
26
Position Z
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting)
L MAX
S
.905
R
(TP)
.006
.000
M
R
(TP)
S
Z
PCB TAIL STICKOUT
N
.062 .001 DIA.
FOR SIZE 16 CONTACTS
SS
V
THREAD
P
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
T
(4 HOLES)
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
L
Max.
M
+.000
–.005
N
Dia.
P Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-569701-XXX
.453
.820
.572
.234
.719
.938
.128
.4375-28 UNEF
.662
.281 – .235
.249 – .188
11
702-XXX
.453
.820
.700
.234
.812
1.031
.128
.5625-24 UNEF
.810
.281 – .235
.249 – .188
13
703-XXX
.453
.820
.850
.234
.906
1.125
.128
.6875-24 UNEF
.960
.281 – .235
.249 – .188
15
704-XXX
.453
.820
.975
.234
.969
1.219
.128
.8125-20 UNEF
1.085
.281 – .235
.249 – .188
17
705-XXX
.453
.820
1.100
.234
1.062
1.312
.128
.9375-20 UNEF
1.210
.281 – .235
.249 – .188
19
706-XXX
.453
.820
1.207
.234
1.156
1.438
.128
1.0625-18 UNEF
1.317
.281 – .235
.249 – .188
21
707-XXX
.484
.790
1.332
.204
1.250
1.562
.128
1.1875-18 UNEF
1.442
.281 – .235
.249 – .188
23
708-XXX
.484
.790
1.457
.204
1.375
1.688
.147
1.3125-18 UNEF
1.567
.281 – .235
.249 – .188
25
709-XXX
.484
.790
1.582
.193
1.500
1.812
.147
1.4375-18 UNEF
1.692
.281 – .235
.249 – .188
All dimensions for reference only.
27
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTPQ00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
L MAX
S
.006
.000
.905
R
(TP)
M
Z
PCB TAIL STICKOUT
R
(TP)
S
N
.062 .001 DIA.
FOR SIZE 16 CONTACTS
T
THREAD
CLINCH NUT
SS
V
THREAD
P
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins
in normal position, S for sockets in normal position. See page 25 for alternate rotation letter
to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
with
Clinch Nuts*
L
Max.
M
+.000
–.005
N
Dia.
P Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Thread
V Thread
Class 2A
(Plated)
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-628701-XXX
.453
.820
.572
.234
.719
.938
.112-40UNJC-3B
.4375-28 UNEF
.662
.281 – .235 .249 – .188
11
702-XXX
.453
.820
.700
.234
.812
1.031
.112-40UNJC-3B
.5625-24 UNEF
.810
.281 – .235 .249 – .188
13
703-XXX
.453
.820
.850
.234
.906
1.125
.112-40UNJC-3B
.6875-24 UNEF
.960
.281 – .235 .249 – .188
15
704-XXX
.453
.820
.975
.234
.969
1.219
.112-40UNJC-3B
.8125-20 UNEF
1.085
.281 – .235 .249 – .188
17
705-XXX
.453
.820
1.100
.234
1.062
1.312
.112-40UNJC-3B
.9375-20 UNEF
1.210
.281 – .235 .249 – .188
19
706-XXX
.453
.820
1.207
.234
1.156
1.438
.112-40UNJC-3B
1.0625-18 UNEF
1.317
.281 – .235 .249 – .188
21
707-XXX
.484
.790
1.332
.204
1.250
1.562
.112-40UNJC-3B
1.1875-18 UNEF
1.442
.281 – .235 .249 – .188
23
708-XXX
.484
.790
1.457
.204
1.375
1.688
.138-32UNJC-3B
1.3125-18 UNEF
1.567
.281 – .235 .249 – .188
25
709-XXX
.484
.790
1.582
.193
1.500
1.812
.138-32UNJC-3B
1.4375-18 UNEF
1.692
.281 – .235 .249 – .188
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628401/409)
28
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting)
L MAX.
S
.905
R
(TP)
.006
.000
M
R
(TP)
Z
PCB TAIL STICKOUT
KK
N
S
SS
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 &
22D CONTACTS
P
T
(4 HOLES)
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569711-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
L
Max.
M
+.000
–.005
N
+.001
–.005
P Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Dia.
±.005
KK Dia.
+.006
–.005
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-569711-XXX
.203
.820
.572
.234
.719
.938
.128
.433
.662
.454 – .401
.468 – .406
11
712-XXX
.203
.820
.700
.234
.812
1.031
.128
.557
.810
.454 – .401
.468 – .406
13
713-XXX
.203
.820
.850
.234
.906
1.125
.128
.676
.960
.454 – .401
.468 – .406
15
714-XXX
.203
.820
.975
.234
.969
1.219
.128
.801
1.085
.454 – .401
.468 – .406
17
715-XXX
.203
.820
1.100
.234
1.062
1.312
.128
.926
1.210
.454 – .401
.468 – .406
19
716-XXX
.203
.820
1.207
.234
1.156
1.438
.128
1.032
1.317
.454 – .401
.468 – .406
21
717-XXX
.234
.790
1.332
.204
1.250
1.562
.128
1.157
1.442
.454 – .401
.468 – .406
23
718-XXX
.234
.790
1.457
.204
1.375
1.688
.147
1.282
1.567
.454 – .401
.468 – .406
25
719-XXX
.234
.790
1.582
.193
1.500
1.812
.147
1.407
1.692
.454 – .401
.468 – .406
All dimensions for reference only.
29
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJTP02R box mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
L MAX.
S
.006
.000
.905
R
(TP)
M
R
(TP)
KK
N
S
T
THREAD
CLINCH NUT
SS
Z
PCB TAIL STICKOUT
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZE 20 &
22D CONTACTS
P
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-628701-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
with
Clinch Nuts
L
Max.
M
+.000
–.005
N
+.001
–.005
P Max.
Panel
Thickness
R
(TP)
S
+.011
–.010
T
Thread
KK Dia.
+.006
–.005
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-628711-XXX
.203
.820
.572
.234
.719
1.031
.112-40UNJC-3B
.433
.662
.454 – .401
.468 – .406
11
712-XXX
.203
.820
.700
.234
.812
1.125
.112-40UNJC-3B
.557
.810
.454 – .401
.468 – .406
13
713-XXX
.203
.820
.850
.234
.906
1.172
.112-40UNJC-3B
.676
.960
.454 – .401
.468 – .406
15
714-XXX
.203
.820
.975
.234
.969
1.281
.112-40UNJC-3B
.801
1.085
.454 – .401
.468 – .406
17
715-XXX
.203
.820
1.100
.234
1.062
1.375
.112-40UNJC-3B
.926
1.210
.454 – .401
.468 – .406
19
716-XXX
.203
.820
1.207
.234
1.156
1.469
.112-40UNJC-3B
1.032
1.317
.454 – .401
.468 – .406
21
717-XXX
.234
.790
1.332
.204
1.250
1.625
.112-40UNJC-3B
1.157
1.442
.454 – .401
.468 – .406
23
718-XXX
.234
.790
1.457
.204
1.375
1.750
.138-32UNJC-3B
1.282
1.567
.454 – .401
.468 – .406
25
719-XXX
.234
.790
1.582
.193
1.500
1.875
.138-32UNJC-3B
1.407
1.692
.454 – .401
.468 – .406
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts. There is also a 3mm clinch nut available (part number 88/91-628410/419)
30
MIL-DTL-38999 Series I Type Connectors
with PCB contacts
LJT07R jam nut receptacle
C
T
.328 MAX.
Z
PCB TAIL STICKOUT
A*
N
.062 .001 DIA.
FOR SIZE 16 CONTACT
.019 .001 DIA.
FOR SIZE 20 & 22D
CONTACTS
RR
THREAD
H
V THREAD
S
.062 MIN.
.125 MAX PANEL THICKNESS
.915 .005
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569721-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
★
*
.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
“D” shaped mounting hole dimensions
Z
Shell
Size
Part Number
A*
+.000
–.010
C
Max.
H Hex
+.017
–.016
L
Max.
N
+.001
–.005
S
±.016
T*
+.010
–.000
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-569721-XXX
.669
1.199
.875
.625
.572
1.062
.697
.4375-28 UNEF
11
722-XXX
.769
1.386
1.000
.625
.700
1.250
.822
.5625-24 UNEF
.6875-24 UNEF .229 – .175 .243 – .182
13
723-XXX
.955
1.511
1.188
.625
.850
1.375
1.007
.6875-24 UNEF
1.0000-20 UNEF .229 – .175
.243 – .182
15
724-XXX
1.084
1.636
1.312
.625
.975
1.500
1.134
.8125-20 UNEF
1.1250-18 UNEF .229 – .175
.243 – .182
17
725-XXX
1.208
1.761
1.438
.625
1.100
1.625
1.259
.9375-20 UNEF
1.2500-18 UNEF .229 – .175
.243 – .182
19
726-XXX
1.333
1.949
1.562
.656
1.207
1.812
1.384
1.0625-18 UNEF
1.3750-18 UNEF .207 – .158
.221 – .165
21
727-XXX
1.459
2.073
1.688
.750
1.332
1.938
1.507
1.1875-18 UNEF
1.5000-18 UNEF .207 – .158
.221 – .165
.8125-20 UNEF .229 – .175 .243 – .182
23
728-XXX
1.580
2.199
1.812
.750
1.457
2.062
1.634
1.3125-18 UNEF
1.6250-18 UNEF .207 – .158
.221 – .165
25
729-XXX
1.709
2.323
2.000
.750
1.582
2.188
1.759
1.4375-18 UNEF
1.7500-18 UNS
.221 – .165
All dimensions for reference only.
31
.207 – .158
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTPQ00R wall mounting receptacle
(back panel mounting)
.000
.005
.447
S
.438 MAX
R
(TP)
SS
Z
PCB TAIL STICKOUT
P
PANEL
THICKNESS
R
S
(TP)
AD
.322
T
4 HOLES
N
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.000
.005
V THREAD
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569731-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
N
+.001
–.005
P Max.
Panel
Thickness
R
(TP)
S
±.016
T
Dia.
±.005
V Thread
Class 2A
(Plated)
AD
Dia.
±.005
SS Dia.
+.000
–.016
Size
16 & 20
Contacts
Size 22D
Contacts
8
88/91-569731-XXX
.473
.142
.594
.812
.120
.4375-28 UNEF
.516
.563
.257 – .200
.268 – .178
10
732-XXX
.590
.142
.719
.938
.120
.5625-24 UNEF
.633
.680
.257 – .200
.268 – .178
12
733-XXX
.750
.142
.812
1.031
.120
.6875-24 UNEF
.802
.859
.257 – .200
.268 – .178
14
734-XXX
.875
.142
.906
1.125
.120
.8125-20 UNEF
.927
.984
.257 – .200
.268 – .178
16
735-XXX
1.000
.142
.969
1.219
.120
.9375-20 UNEF
1.052
1.108
.257 – .200
.268 – .178
18
736-XXX
1.125
.142
1.062
1.312
.120
1.0625-18 UNEF
1.177
1.233
.257 – .200
.268 – .178
20
737-XXX
1.250
.142
1.156
1.438
.120
1.1875-18 UNEF
1.302
1.358
.257 – .200
.268 – .178
22
738-XXX
1.375
.142
1.250
1.562
.120
1.3125-18 UNEF
1.427
1.483
.257 – .200
.268 – .178
24
739-XXX
1.500
.142
1.375
1.688
.147
1.4375-18 UNEF
1.552
1.610
.257 – .200
.268 – .178
All dimensions for reference only.
32
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JTP02R box mounting receptacle
(back panel mounting)
S
.505
.000
.447 .005
R
(TP)
.006
.000
P
PANEL THICKNESS
Z
PCB TAIL STICKOUT
R
S
(TP)
AD
.322
T
4 HOLES
N
KK
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.000
.005
L
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569741-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
+
.005 DIA
M
Z
Shell
Size
Part Number
L
Max.
N
+.001
–.005
P Max.
Panel
Thickness
R
(TP)
S
±.016
T
Dia.
±.005
AD
Dia.
±.005
KK
Dia.
Max.
Size
16 & 20
Contacts
Size 22D
Contacts
8
88/91-569741-XXX
.225
.473
.147
.594
.812
.120
.516
.531
.455 – .403
.466 – .409
10
742-XXX
.225
.590
.152
.719
.938
.120
.633
.656
.455 – .403
.466 – .409
12
743-XXX
.225
.750
.152
.812
1.031
.120
.802
.828
.455 – .403
.466 – .409
14
744-XXX
.225
.875
.152
.906
1.125
.120
.927
.953
.455 – .403
.466 – .409
16
745-XXX
.225
1.000
.152
.969
1.219
.120
1.052
1.078
.455 – .403
.466 – .409
18
746-XXX
.225
1.125
.152
1.062
1.312
.120
1.177
1.203
.455 – .403
.466 – .409
20
747-XXX
.225
1.250
.179
1.156
1.438
.120
1.302
1.328
.455 – .403
.466 – .409
22
748-XXX
.225
1.375
.179
1.250
1.562
.120
1.427
1.453
.455 – .403
.466 – .409
24
749-XXX
.225
1.500
.169
1.375
1.688
.147
1.552
1.578
.455 – .403
.466 – .409
All dimensions for reference only.
33
MIL-DTL-38999 Series II Type Connectors
with PCB contacts
JT07R jam nut receptacle
S
C
(2 PLACES)
M
.094
H
+ .011
– .010
.062 MIN.
.109 MAX. PANEL THICKNESS
Z
PCB TAIL STICKOUT
N
.062 ± .001 DIA. FOR SIZE 16 CONTACTS
.019 ± .001 DIA.
FOR SIZES 20 & 22D CONTACTS
V THREAD
L
T*
RR
THREAD
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569751-35P designates shell size 8 with a 8-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
★
*
.059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
“D” shaped mounting hole dimensions
Z
Shell
Size
Part Number
A*
+.000
–.010
C
Max.
H Hex
+.017
–.016
L
Max.
M
±.005
N
+.001
–.005
S
±.016
T*
+.010
–.000
V Thread
Class 2A
(Plated)
RR Thread
Class 2A
(Plated)
Size
16 & 20
Contacts
Size 22D
Contacts
8
88/91-569751-XXX
.830
1.390
1.062
.453
.438
.473
1.250
.884
.4375-28 UNEF
.8750-20 UNEF .272 – .200
.283 – .178
10
752-XXX
.955
1.515
1.188
.453
.438
.590
1.375
1.007
.5625-24 UNEF
1.0000-20 UNEF .272 – .200
.283 – .178
12
753-XXX
1.084
1.640
1.312
.453
.438
.750
1.500
1.134
.6875-24 UNEF
1.1250-18 UNEF .272 – .200
.283 – .178
14
754-XXX
1.208
1.765
1.438
.453
.438
.875
1.625
1.259
.8125-20 UNEF
1.2500-18 UNEF .272 – .200
.283 – .178
16
755-XXX
1.333
1.953
1.562
.453
.438
1.000
1.781
1.384
.9375-20 UNEF
1.3750-18 UNEF .272 – .200
.283 – .178
18
756-XXX
1.459
2.031
1.688
.453
.438
1.125
1.890
1.507
1.0625-18 UNEF
1.5000-18 UNEF .272 – .200
.283 – .178
20
757-XXX
1.576
2.156
1.812
.422
.464
1.250
2.016
1.634
1.1875-18 UNEF
1.6250-18 UNEF .272 – .200
.283 – .178
22
758-XXX
1.701
2.280
2.000
.422
.464
1.375
2.140
1.759
1.3125-18 UNEF
1.7500-18 UNS
.272 – .200
.283 – .178
24
759-XXX
1.826
2.405
2.125
.422
.464
1.500
2.265
1.884
1.4375-18 UNEF
1.8750-16 UN
.272 – .200
.283 – .178
All dimensions for reference only.
34
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting)
S
2 PLACES
LL
R1
M
B
THREAD
2 PLACES
R2
L
AA
2 PLACES
Z
PCB TAIL STICKOUT
.062 .001 DIA.
FOR SIZE 16 CONTACTS
TT
4 PLACES
.005 M
.019 .001 DIA.
FOR SIZE 20 & 22D CONTACTS
RED
BAND
T
4 PLACES
BLUE
BAND
V THREAD
1.240 MAX.
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569761-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
M
+.000
–.005
R
T
+.008
–.006
†
††
V
Thread
Metric
Designates true position dimensioning
Red band indicates fully mated
Blue band indicates rear release contact
retention system
AA
Max.
LL
Panel
+.006
Thickness –.000
Z
TT
+.008
–.006
Size
16 & 20
Contacts
Shell
Size
Part Number
9
88/91-569761-XXX
.6250
.469
.820
.719
.594
.948
.128
M12X1-6g
.234
.905
.216
.228–.178
.242–.181
11
762-XXX
.7500
.469
.820
.812
.719
1.043
.128
M15X1-6g
.234
.905
.194
.228–.178
.242–.181
1
R
2
S
Max.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
Size 22D
Contacts
13
763-XXX
.8750
.469
.820
.906
.812
1.137
.128
M18X1-6g
.234
.905
.194
.228–.178
.242–.181
15
764-XXX
1.0000
.469
.820
.969
.906
1.232
.128
M22X1-6g
.234
.905
.173
.228–.178
.242–.181
17
765-XXX
1.1875
.469
.820
1.062
.969
1.323
.128
M25X1-6g
.234
.905
.194
.228–.178
.242–.181
19
766-XXX
1.2500
.469
.820
1.156
1.062
1.449
.128
M28X1-6g
.234
.905
.194
.228–.178
.242–.181
21
767-XXX
1.3750
.500
.790
1.250
1.156
1.575
.128
M31X1-6g
.204
.905
.194
.228–.178
.242–.181
23
768-XXX
1.5000
.500
.790
1.375
1.250
1.701
.154
M34X1-6g
.204
.905
.242
.228–.178
.242–.181
25
769-XXX
1.6250
.500
.790
1.500
1.375
1.823
.154
M37X1-6g
.204
.905
.242
.228–.178
.242–.181
All dimensions for reference only.
35
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP00R wall mounting receptacle
(back panel mounting) (with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
S
2 PLACES
LL
M
B
THREAD
R
2 PLACES
L
AA
Z
PCB TAIL STICKOUT
.062 .001 DIA.
FOR SIZE 16 CONTACTS
T
THREAD
CLINCH NUT
RED
BAND
.005 M
BLUE
BAND
.019 .001 DIA.
FOR SIZE 20 & 22D CONTACTS
V THREAD
1.240 MAX.
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-628741-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nuts
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
M
+.000
–.005
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
†
††
R
S
Max.
T
Thread
V
Thread
Metric
Designates true position dimensioning
Red band indicates fully mated
Blue band indicates rear release contact
retention system
AA
Max.
LL
Panel
+.006
Thickness –.000
Z
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-628741-XXX
.6250
.469
.820
.719
1.094
.112-40UNC-3B
M12X1-6g
.234
.905
.228–.178
.242–.181
11
742-XXX
.7500
.469
.820
.812
1.187
.112-40UNC-3B
M15X1-6g
.234
.905
.228–.178
.242–.181
13
743-XXX
.8750
.469
.820
.906
1.281
.112-40UNC-3B
M18X1-6g
.234
.905
.228–.178
.242–.181
15
744-XXX
1.0000
.469
.820
.969
1.344
.112-40UNC-3B
M22X1-6g
.234
.905
.228–.178
.242–.181
17
745-XXX
1.1875
.469
.820
1.062
1.437
.112-40UNC-3B
M25X1-6g
.234
.905
.228–.178
.242–.181
19
746-XXX
1.2500
.469
.820
1.156
1.531
.112-40UNC-3B
M28X1-6g
.234
.905
.228–.178
.242–.181
21
747-XXX
1.3750
.500
.790
1.250
1.625
.112-40UNC-3B
M31X1-6g
.204
.905
.228–.178
.242–.181
23
748-XXX
1.5000
.500
.790
1.375
1.750
.138-32UNC-3B
M34X1-6g
.204
.905
.228–.178
.242–.181
25
749-XXX
1.6250
.500
.790
1.500
1.875
.138-32UNC-3B
M37X1-6g
.204
.905
.228–.178
.242–.181
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
36
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
S
2 PLACES
R1
L
BLUE
BAND
2 PLACES
R2
ZZ
RED
BAND
2 PLACES
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
.005 M
TT
4 PLACES
T
4 PLACES
B
THREAD
Z
PCB TAIL STICKOUT
AA
M
LL
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569771-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
M
+.000
–.005
R
R
1
2
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
†
††
S
Max.
T
+.008
–.006
AA
Max.
Panel
Thickness
Designates true position dimensioning
Red band indicates fully mated
Blue band indicates rear release contact
retention system
Z
LL
+.006
–.000
TT
+.008
–.006
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-569771-XXX
.6250
.205
.820
.719
.594
.948
.128
.234
.905
.216
.460–.375
.471–.399
11
772-XXX
.7500
.205
.820
.812
.719
1.043
.128
.234
.905
.194
.460–.375
.471–.399
13
773-XXX
.8750
.205
.820
.906
.812
1.137
.128
.234
.905
.194
.460–.375
.471–.399
15
774-XXX
1.0000
.205
.820
.969
.906
1.232
.128
.234
.905
.173
.460–.375
.471–.399
17
775-XXX
1.1875
.205
.820
1.062
.969
1.323
.128
.234
.905
.194
.460–.375
.471–.399
19
776-XXX
1.2500
.205
.820
1.156
1.062
1.449
.128
.234
.905
.194
.460–.375
.471–.399
21
777-XXX
1.3750
.235
.790
1.250
1.156
1.575
.128
.204
.905
.194
.460–.375
.471–.399
23
778-XXX
1.5000
.235
.790
1.375
1.250
1.701
.154
.204
.905
.242
.460–.375
.471–.399
25
779-XXX
1.6250
.235
.790
1.500
1.375
1.823
.154
.204
.905
.242
.460–.375
.471–.399
All dimensions for reference only.
37
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TVP02R box mounting receptacle
(with clinch nuts)
CONNECTOR WITH CLINCH NUTS
(4 PLACES)
S
2 PLACES
L
BLUE
BAND
R
2 PLACES
RED
BAND
.062 .001 DIA.
FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 &
22D CONTACTS
T
THREAD
CLINCH NUT
Z
PCB TAIL STICKOUT
B
THREAD
AA
M
.005 M
.162 – .072
FOR SIZE 16 & 20 CONTACTS
.150 – .022
FOR SIZE 22D CONTACTS
LL
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-628751-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
with
Clinch Nuts
B Thread
Class 2A
(Plated)
0.1P-0.3L-TS
L
Max.
M
+.000
–.005
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
†
††
Designates true position dimensioning
Red band indicates fully mated
Blue band indicates rear release contact
retention system
R
S
Max.
T
Thread
AA
Max.
Panel
Thickness
Z
LL
+.006
–.000
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-628751-XXX
.6250
.205
.820
.719
1.031
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
11
752-XXX
.7500
.205
.820
.812
1.125
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
13
753-XXX
.8750
.205
.820
.906
1.172
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
15
754-XXX
1.0000
.205
.820
.969
1.281
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
17
755-XXX
1.1875
.205
.820
1.062
1.375
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
19
756-XXX
1.2500
.205
.820
1.156
1.469
.112-40UNC-3B
.234
.905
.460–.375
.471–.399
21
757-XXX
1.3750
.235
.790
1.250
1.562
.112-40UNC-3B
.204
.905
.460–.375
.471–.399
23
758-XXX
1.5000
.235
.790
1.375
1.750
.138-32UNC-3B
.204
.905
.460–.375
.471–.399
25
759-XXX
1.6250
.235
.790
1.500
1.875
.138-32UNC-3B
.204
.905
.460–.375
.471–.399
All dimensions for reference only.
* Consult Amphenol for more information on ordering connectors with clinch nuts.
38
MIL-DTL-38999 Series III Type Connectors
with PCB contacts
TV07R jam nut receptacle
.378 MAX.
PANEL THICKNESS
.062 MIN.
.125 MAX.
C
BLUE
BAND
Z PCB TAIL STICKOUT
.062 .001 DIA. FOR SIZE 16 CONTACTS
.019 .001 DIA.
FOR SIZES 20 & 22D CONTACTS
B THREAD
RED
BAND
V THREAD
H
S
2 PLACES
1.280 MAX.
HOW TO ORDER
• Order by applicable 88/91 part number in table below.
88 prefix designates olive drab cadmium plated connector shell.
91 prefix designates electroless nickel plated connector shell.
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use.
Example part number: 88-569781-35P designates shell size 9 with a 9-35 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Composite Series III connectors are available;
consult Amphenol, Sidney, NY.
† Red band indicates fully mated
†† Blue band indicates rear release contact
retention system
★ .059 dia. min. 3 lockwire holes.
Formed lockwire hole design (6 holes) is optional.
*
“D” shaped mounting hole dimensions
Z
Shell
Size
Part Number
A*
+.000
–.000
B Thread
Class 2A (Plated)
0.1P-0.3L-TS
C
Max.
H Hex
+.017
–.016
S
±.010
T
+.010
–.000
V Thread
Metric
Size
16 & 20
Contacts
Size 22D
Contacts
9
88/91-569781-XXX
.669
.6250
1.199
.875
1.062
.697
M12X1-6g
.244 – .200
.258 – .206
11
782-XXX
.769
.7500
1.386
1.000
1.250
.822
M15X1-6g
.244 – .200
.258 – .206
13
783-XXX
.955
.8750
1.511
1.188
1.375
1.007
M18X1-6g
.244 – .200
.258 – .206
15
784-XXX
1.084
1.0000
1.636
1.312
1.500
1.134
M22X1-6g
.244 – .200
.258 – .206
17
785-XXX
1.208
1.1875
1.761
1.438
1.625
1.259
M25X1-6g
.244 – .200
.258 – .206
19
786-XXX
1.333
1.2500
1.949
1.562
1.812
1.384
M28X1-6g
.222 – .177
.236 – .180
21
787-XXX
1.459
1.3750
2.073
1.688
1.938
1.507
M31X1-6g
.222 – .177
.236 – .180
23
788-XXX
1.575
1.5000
2.199
1.812
2.062
1.634
M34X1-6g
.222 – .177
.236 – .180
25
789-XXX
1.709
1.6250
2.323
2.000
2.188
1.759
M37X1-6g
.222 – .177
.236 – .180
All dimensions for reference only.
39
Stand-off Adapter
for use with 38999 PCB connectors
Amphenol’s stand-off adapter and spanner nut assembly allows any MIL-DTL38999 jam nut receptacle to support PCB contacts and may eliminate the need
for special stand-off shell design. Consult Amphenol for more information.
Tri-Start MIL-DTL-38999 Jam Nut
Connector with Stand-off Adapter
SPANNER
NUT
ADAPTER
R
(TP)
45°
TYP
E
A
J
DIA.
R
(TP)
V THREAD
L
C DIA.
4 HOLES
#6-32 UNC-2B
THREAD (PLATED)
B DIA.
T
.002 M F
• HOW TO ORDER
• Order by applicable 10- part number in table below.
Last digit designates finish - see finish table.
Shell
Size
9
11
FINISH DATA**
Part Number
A
± .003
B Dia.
± .003
C Dia.
+.005
–.001
E
±.005
J Dia.
+.005
–.000
L
±.003
V Thread
Metric
Plated
T*
±.002
10-658266-01( )
1.062
1.188
.750
.200
.625
.150
M12X1-6H
.250
10-658266-02( )
1.250
1.375
.900
.200
.744
.150
M15X1-6H
.250
13
10-658266-03( )
1.375
1.500
.975
.200
.862
.150
M18X1-6H
.250
15
10-658266-04( )
1.500
1.625
1.125
.200
1.019
.150
M22X1-6H
.250
17
10-658266-05( )
1.625
1.750
1.250
.200
1.137
.150
M25X1-6H
.250
19
10-658266-06( )
1.812
1.938
1.375
.200
1.255
.150
M28X1-6H
.250
21
10-658266-07( )
1.938
2.062
1.469
.200
1.373
.150
M31X1-6H
.250
23
10-658266-08( )
2.062
2.188
1.625
.200
1.492
.150
M34X1-6H
.250
25
10-658266-09( )
2.188
2.312
1.750
.200
1.610
.150
M37X1-6H
.250
All dimensions for reference only.
* For information on additional ‘T’ dimension lengths, consult Amphenol.
40
Suffix
Designation
Description
9
Olive drab cadmium
plate, nickel base plate
G
Electroless nickel plate
**Other finishes available; consult
Amphenol for further information.
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT02 box mounting receptacle
L
S
4 HOLES
.120 .005 DIA.
(.147 .005 DIA. SIZE 24)
R
(TP)
R
(TP)
S
.030 .001 DIA.
FOR SIZE 16 & 20
CONTACTS
M
A
N
K
Z
PCB TAIL STICKOUT
HOW TO ORDER
• Order by applicable 71 part number in table below.
71 prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert availability chart on
page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See
page 26 for alternate rotation letter to use.
Example part number: 71-570121-98P designates shell size 8 with a 8-98 insert
and pin contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
(MMC) located within .0025 of (TP)
Z
+.040
–.050
Part Number
A
+.001
–.005
K
+.021
–.010
L
Max.
M
+.010
–.000
N
Dia.
Max.
R
(TP)
S
+.011
–.010
Size 16 & 20
Contacts
6
71-570120-XXX
.348
.493
.825
.431
.323
.469
.688
.380
Shell
Size
8
71-570121-XXX
.473
.493
.825
.431
.449
.594
.812
.380
10
71-570122-XXX
.590
.493
.825
.431
.573
.719
.938
.380
12
71-570123-XXX
.750
.493
.825
.431
.699
.812
1.031
.380
14
71-570124-XXX
.875
.493
.825
.431
.823
.906
1.125
.380
16
71-570125-XXX
1.000
.493
.825
.431
.949
.969
1.219
.380
18
71-570126-XXX
1.125
.493
.825
.431
1.073
1.062
1.312
.380
20
71-570127-XXX
1.250
.650
1.076
.556
1.199
1.156
1.438
.286
22
71-570128-XXX
1.375
.650
1.076
.556
1.323
1.250
1.562
.286
24
71-570129-XXX
1.500
.683
1.109
.589
1.449
1.375
1.688
.253
All dimensions for reference only.
41
MIL-C-26482 Series 1 Type Connectors
with PCB contacts
PT07 jam nut receptacle
S
M
H
K
.030 .001 DIA.
FOR SIZE 16 & 20 CONTACTS
J
S
A
R THREAD
P
Z
PCB TAIL STICK OUT
HOW TO ORDER
• Order by applicable 71 part number in table below.
71 prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and
pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for
pins in normal position, S for sockets in normal position. See page 26 for alternate rotation
letter to use.
Example part number: 71-533721-98P designates shell size 8 with a 8-98 insert and pin
contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
P Panel
Thickness
Part Number
A Dia.
+.001
–.005
H
+.017
–.016
J Flat
+.000
–.010
K
+.011
–.010
M
±.010
Min.
6
71-533720-XXX
.348
.625
.405
.125
.696
8
71-533721-XXX
.473
.750
.530
.125
.696
10
71-533722-XXX
.590
.875
.655
.125
12
71-533723-XXX
.750
1.062
.818
14
71-533724-XXX
.875
1.188
16
71-533725-XXX
1.000
1.312
18
71-533726-XXX
1.125
1.438
20
71-533727-XXX
1.250
22
71-533728-XXX
24
71-533729-XXX
Shell
Size
All lockwire holes are .044 dia. min.
Z
+.025
–.035
Max.
R
Thread
Class 2A
S
±.010
Size 16 & 20
Contacts
.062
.125
.4375-28 UNEF
.812
.376
.062
.125
.5625-24 UNEF
.938
.376
.696
.062
.125
.6875-24 UNEF
1.062
.376
.125
.696
.062
.125
.8750-20 UNEF
1.250
.376
.942
.125
.696
.062
.125
1.0000-20 UNEF
1.375
.376
1.066
.125
.696
.062
.125
1.1250-18 UNEF
1.500
.376
1.191
.125
.696
.062
.125
1.2500-18 UNEF
1.625
.376
1.562
1.316
.156
.884
.062
.250
1.3750-18 UNEF
1.812
.367
1.375
1.688
1.441
.156
.884
.062
.250
1.5000-18 UNEF
1.938
.367
1.500
1.816
1.566
.156
.917
.062
.250
1.6250-18 UNEF
2.062
.334
All dimensions for reference only.
42
MIL-5015 Type Connectors
with PCB contacts
MS3102R box mounting receptacle
S
A
THREAD
R
B
Z
PCB TAIL STICKOUT
R
S
N
.030 .001 DIA.
FOR SIZE 16 CONTACTS
T
4 HOLES
M
L
K
HOW TO ORDER
• Order by applicable 10- part number in table below.
10- prefix designates olive drab cadmium plated connector shell.
(For availability of other finishes consult Amphenol, Sidney, NY)
• Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out
illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal
position, S for sockets in normal position. See page 26 for alternate rotation letter to use.
Example part number: 10-602462-3P designates shell size 10SL with a 10SL-3 insert
and pin contacts in normal position.
• Z dimension is determined by contact type in the insert arrangement.
• Most common options are shown; other options are available.
Shell
Size
Part Number
A
Thread
Class 2A
Reverse Bayonet GT Series connectors
that incorporate 5015 inserts can also be
supplied with printed circuit board contacts.
Consult Amphenol for more information.
B
Min. Full
Thread
K
+.020
–.010
L
+.000
–.010
M
+.010
–.000
N Dia.
+.010
–.000
R
±.005
Z
±.045
S
±.031
T Dia.
+.004
–.002
Size 16
Contacts
8S
10-602460-XXX
.5000-28 UNEF
.391
.672
.297
.562
.375
.594
.875
.120
.188
10S
461-XXX
.6250-24 NEF
.391
.672
.297
.562
.500
.719
1.000
.120
.188
10SL
462-XXX
.6250-24 NEF
.391
.672
.297
.562
.625
.719
1.000
.120
.188
12S
463-XXX
.7500-20 UNEF
.450
.672
.297
.562
.625
.812
1.094
.120
.188
12
464-XXX
.7500-20 UNEF
.625
.860
.484
.750
.625
.812
1.094
.120
.188
14S
465-XXX
.8750-20 UNEF
.450
.672
.297
.562
.750
.906
1.188
.120
.188
14
466-XXX
.8750-20 UNEF
.625
.860
.484
.750
.750
.906
1.188
.120
.188
16S
467-XXX
1.0000-20 UNEF
.450
.672
.297
.562
.875
.969
1.281
.120
.188
16
468-XXX
1.0000-20 UNEF
.625
.860
.484
.750
.875
.969
1.281
.120
.188
18
469-XXX
1.1250-18 NEF
.625
.891
.453
.750
1.000
1.062
1.375
.120
.188
20
470-XXX
1.2500-18 NEF
.625
.891
.453
.750
1.125
1.156
1.500
.120
.188
22
471-XXX
1.3750-18 NEF
.625
.891
.453
.750
1.250
1.250
1.625
.120
.188
24
472-XXX
1.5000-18 NEF
.625
.953
.453
.812
1.375
1.375
1.750
.147
.188
28
473-XXX
1.7500-18 NS
.625
.953
.453
.812
1.625
1.562
2.000
.147
.188
32
474-XXX
2.0000-18 NS
.625
1.031
.438
.875
1.875
1.750
2.250
.173
.188
36
475-XXX
2.2500-16 UN
.625
1.031
.438
.875
2.062
1.938
2.500
.173
.188
40
476-XXX
2.5000-16 UN
.625
1.031
.438
.875
2.312
2.188
2.750
.173
.188
All dimensions for reference only.
43
Universal Header Assemblies
for flex print or PCB connectors
Mounts to all MIL-DTL-38999 and
MIL-C-26482 Connectors
The use of connectors with printed circuit
termination is rapidly gaining popularity due
to the use of high volume, vapor phase or
wave solder manufacturing processes. Termination of this style of connector to flex
print or a printed circuit board represents a
major cost in the manufacturing process for
users. When adding flex or printed circuit
board assemblies to an expensive filter or filter/transient protection connector, the total
cost of a failed solder joint, a bent pin, or an
unanticipated electrical failure becomes prohibitive. The universal header assembly from Amphenol will provide for easy separation of the connector from the board on these occasions.
Headers provide easy separation of the
connector from the PC board.
Header Assemblies Provide Cost Savings
Incorporation of the header assembly provides the user with
time and cost saving potentials. These header assemblies can
be vapor phase or wave soldered to flex or printed circuit
boards prior to the receipt of the EMI/EMP connector. Headers
can be installed to standard connectors, allowing for electrical
testing that would adversely affect the sensitive diodes, MOV’s
or capacitors in the EMI/EMP connectors. Expensive connector
assemblies can be easily removed from and reattached to the
header assembly as the manufacturing process dictates.
Cylindrical Configuration
•
•
•
•
•
Mounting Applications
3 PCB stickout dimensions are available.
Size 22D contacts use .175 thick headers
Size 16 contacts use .195 thick headers
Consult Amphenol for Size 20 contact use with headers.
Headers for cylindrical connectors accommodate up to 128
pins. Consult Amphenol catalogs for mating connector contact layouts (12-092 and 12-090 for MIL-DTL-38999 and
12-070 for MIL-C-26482).
Mounting to Rectangular ARINC Connectors
Shell modifications are recommended, but are not necessary.
The header assembly can be attached to connectors with standard flange placement or directly to the circuit board. The ideal
application would involve either a single flange moved all the
way to the rear of the connector or a double flange. Cinch nuts
can be installed in either flange to allow easier mounting to the
panel or the header assembly. The forward flange would mount
the connector to the panel; the rear flange would be used to
mount the header assembly. Various types of captivated or
loose attaching screws can be utilized for unique applications.
Amphenol universal headers are slotted to allow mounting to all
series of MIL-DTL-38999 or MIL-C-26482 connectors without
special alterations. They are of similar dimension as the flange
of the mounting connector and would be approximately .185
inches (4.70 mm) thick.
• Headers for ARINC connector arrangements accommodate up to 150 pins.
• Consult Amphenol for ARINC configurations and detailed
dimensions.
Materials
• Body is molded from Torlon or PPS (Polyphenylene
Sulfide)
• Electrical engagement areas of the header contact are
plated with .00003 inches minimum of gold over .00005
inches minimum of nickel.
Incorporates a Shorter Pin/Socket Contact
The heart of the header assembly is a short pin/socket contact.
The tall of the contact would accommodate standard throughhole diameter and thickness of the flex or printed circuit board
materials. The socket is imbedded in the molded material, making electrical engagement with the printed circuit tail of the connector.
44
Universal Header Assemblies
for flex print or PCB connectors, cont.
The drawing below shows the standard universal adapter for use with MIL-DTL-38999 and MIL-C-26482
connectors. Consult Amphenol, Sidney, NY for drawings of headers for ARINC configurations.
S
R1
VISUAL
INDICATOR NOTCH
FOR TOP CL OF
INSERT PATTERN
(SIZE & CONFIGURATION
OPTIONAL)
R2
T
G
SIZE 22
CONTACT VIEW
.020 ± .001
TT
F RADIUS
Assembly
Part Number
21-904008-XX( )
21-904010-XX( )
21-904012-XX( )
21-904014-XX( )
21-904016-XX( )
21-904018-XX( )
21-904020-XX( )
21-904022-XX( )
21-904024-XX( )
Shell
Size
8/9
10/11
12/13
14/15
16/17
18/19
20/21
22/23
24/25
F
Radius
G
±.005
.094
.094
.094
.125
.125
.125
.125
.125
.125
See Suffix Chart
† TP designates true position dimensioning.
S
±.005
T
+.008
–.006
R1
TP†
R2
TP†
TT
+.008
–.006
.938
1.031
1.125
1.219
1.312
1.438
1.562
1.688
1.812
.128
.128
.128
.128
.128
.128
.128
.154
.154
.719
.812
.906
.969
1.062
1.156
1.250
1.375
1.500
.594
.719
.812
.906
.969
1.062
1.156
1.250
1.375
.216
.194
.194
.173
.194
.194
.194
.242
.242
Assemblies containing Size 22 contact only: .175
Assemblies containing Size 16 or 20 contacts: .195
HOW TO ORDER INFORMATION
For Universal Adapter used with MIL-DTL-38999 and MIL-C-26482
Connectors
XX – XX
Shell Size
Designation*
X
08
10
12
14
16
18
20
22
24
Designates Amphenol®
Interface Adapter
Shell size designation for
MIL-DTL-38999 Series I, II, III and IV
or MIL-C-26482 Series 1 and 2.
See suffix chart.
Arrangement number - See MIL-STD-1560
or MIL-STD-1669. Also consult Amphenol
catalogs 12-092 (MIL-DTL-38999 Series III),
12-090 (MIL-DTL-38999 Series I, II), and
12-070 (MIL-C-26482 Series 1)
Contact PCB Stickout designation
See suffix chart.
*
For how to order information on adapters to be used with ARINC connectors,
consult Amphenol Aerospace, Sidney NY.
45
SIZE 16 AND 20
CONTACT VIEW
B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
.050
.040 ± .001 (SIZE 20)
.0625 ± .0010 (SIZE 16)
G
NOTE:
Size 22 accepts .018 to .022 dia. PCB tails.
Size 16 accepts .048 to .064 dia. PCB tails.
Size 20 accepts .037 to .043 dia. PCB tails.
ASSEMBLY NUMBER SUFFIX CHART
Use coded number as follows:
21-9040
B
PCB STICKOUT
(SEE SUFFIX CHART BELOW)
Arrangement
Number
Suffix***
Insert
Arrangement
Suffix
from
MIL-STD-1560 or
MIL-STD-1669
Contact
PCB Stickout**
Suffix
B ±.015
Stickout
1
2
3
.120
.185
.270
Shell size designation for MIL-DTL-38999 Series I, II, III & IV
and MIL-C-26482 Series 1 and 2.
Examples: Shell size 9 use 08. Shell size 25 use 24.
** Size 22 contacts available in all 3 stickout lengths.
Size 16 and 20 contacts available only in .185 and .270 lengths.
*** Insert arrangement 14-97 and 15-97 are not available at this
time. Consult Amphenol, Sidney, NY for information.
Additional Products for PCB Application
Amphenol rectangular interconnects
®
Amphenol is also a leader in rectangular
interconnects for printed circuit board application. Within the rectangular families of
Amphenol interconnects are Low Mating
Force MIL-C-55302 connectors and LRM Surface Mount Connectors.
1
2
3
Variety of Low Mating Force Rectangular Connectors including styles
with fiber optics (right) and small styles with only 10 contacts (upper left).
LOW MATING FORCE MIL-C-55302 CONNECTORS
• Superior electrical characteristics - redundant current paths, low
constrictive resistance, stable time/life contact resistance,
uniform current densities
• High performance polyester dielectric moldings
• Over 20,000 mating cycles with B3 Bristle Brush Bunch®
contacts
• Significant reduction in mating force. Only 1.5 ounce max
contact engaging and separating forces
• –65° to +125°C temperature rating
• High circuit count interconnections to 400 contacts per connector
• Two, three and four row patterns, 10 to 100 contacts per row,
in one contact per row increments
• 0.100 in. center to center contact spacing, square grid
• Serviceability - removable crimp contacts, repairable PC
stud and solder less wrap contacts
• Board support structure - reinforcing reduced
• Variety of contact terminations and platings
• Accessories to suit latching, piloting and polarization variations
• Up to 256 keyed mating polarizations
M55302/166 or 167 Mother Board, M55302/170 Daughter Board
1., 2. Two piece PCB connector featuring PCB stud or solderless
wrap contacts in the MB Series and field repairable 90° PCB stud
contacts in the DB Series.
4
M55302/169 Input/Output
3. Rear release, rear removable crimp contacts for discrete wire
cabling. I/O connector series mates with standard MB and PC receptacle series to provide external inputs/outputs.
M55302/168 PC
4. 90° PCB stud contacts for side mounting on board. Mates with DB
and I/O series.
Hybrid Rectangular Connectors with Brush/Power/Coax/Fiber
Optic Combinations
Amphenol offers wide versatility of combining contact types in rectangular interconnects.
For more information on Low Mating Force Connectors see catalog
12-035 online at www.amphenol-aerospace.com
46
Additional Products for PCB Application
Amphenol rectangular interconnects, cont.
®
LRM SURFACE MOUNT CONNECTORS
The introduction of high speed integrated circuitry such as VHSIC and MMIC
has enabled the Design Engineer to accomplish far more on his printed circuit
board than ever before. This, coupled with the emergence of a revolutionary
change in avionics packaging - modular avionic architectures - has created the
need for a high performance, low insertion force PCB connector with significantly increased contact density.
The LRM (Line Replaceable Module) connector series are high performance,
high density interconnects, specifically designed to connect printed circuit
boards. The Amphenol Brush contact technology is the foundation of the LRM
connector series.
LRM Connectors with Staggered Grid
• Advanced design to provide high contact density for high speed integrated
circuitry in SEM-E and custom form factors
• 180 contact insert pattern grid in 8 rows: 0.100 inch spacing along the row
with 0.050 inch between rows, rows offset 0.050 inch.
• Options include various shell designs to accommodate a wide range of PC
board/heat sink combinations
• Solder tail, wire wrap or compliant contact availability
• ESD protection
LRM Connectors with GEN-X Grid
• Higher contact density and improved electrical performance
• All the features of the 180 contact pattern, including ESD protection
• Available in SEM-E and custom form factors
• 236 contact pattern grid in 8 rows: 0.075 inch spacing along the row with
0.060 inch between rows, rows offset 0.0375 inch
LRM Staggered Grid Airflow-thru Connectors
• Available for wider boards up to 0.425 inch. These accommodate standard
brush tails in staggered pattern, but with increased spacing in the center,
and they also provide more airflow cooling of inserts.
LRM Connectors with Many Contact and Shell Design Options
Flexibility to meet customer demands that include: combinations of brush and
fiber optics; options for high speed contacts, RF contacts, or new high amperage RADSOK® contacts; incorporation of flex circuits; custom shells with multiple bays.
For more information on LRM Connectors see new catalog 12-037 at website
www.amphenol-aerospace.com.
BACKPLANE ASSEMBLIES
Amphenol is the leading manufacturer of custom backplane assemblies using
high density, ruggedized, board-to-board backplane interconnects. These can
incorporate brush contacts, pc tail, or press-fit compliant pin contacts, or fiber
optic termini. They also can incorporate fork and blade contacts (see next page
for fork and blade contact connectors).
• Electrical Backplanes - Large panel sizes with high layer counts, and features such as high aspect ratio plating, small diameter plated-through holes,
and controlled impedances.
• Optical Backplanes - Fiber termination with Multi-Terminal (MT) optical ferrules. Ribbon cable sorting allows programming flexibility; thus rendering the
entire system easily upgradeable.
• Hybrid Optical Backplanes - Integrated electrical and optical systems in one
discreet package for advanced avionics systems.
For more information on Backplane Assemblies from Amphenol Backplane
Systems division, see publication SL-392 at websites:
www.amphenol-abs.com or www.amphenol-aerospace.com.
47
From top to bottom:
Staggered Grid, 2 Bay LRM;
GEN-X Grid, 2 Bay LRM;
LRM inserts with RADSOK contacts;
LRM insert with MT ferrule fiber optics and brush
contacts in a Differential Pair insert.
LRM Module Inserts (showing front and back of
inserts) with PC Tails in Staggered Grid Pattern
Backplane Assembly with LRM Connectors with
Brush Contacts on one side and Cylindrical Connectors with Press-fit Compliant Contacts on the other.
Amphenol ® Rectangular Interconnects
additional products for PCB application
UHD MODULE/BACKPLANE CONNECTORS WITH FORK & BLADE
CONTACTS
Amphenol’s wide range of board level interconnects also includes high
density UHD Series module and backplane connectors. These use the
staggered grid pattern but do not use brush contacts. The staggered grid
pattern is 80 contacts per inch, .025 pitch in 8 rows. They are SEM-E format and are qualified to: EIA 15-763, DESC 89065, IEEE 1101.1 to
1101.9.
The UHD module connectors have surface mount blade contacts and the
mating UHD backplane connectors have solderless press-fit tuning fork
contacts. There are a wide range of high contact density patterns and the
length and style can be tailored to meet customer requirements. They
are rigid pin terminated to the board or flex terminated to the board.
Coax, fiber optics and power contacts can also be integrated into the
connector configuration. Other options include EMI shielding and UHD
interconnects can be provided in a stacking configuration.
NAFI SERIES WITH FORK & BLADE CONTACTS
Amphenol NAFI daughtercard and backplane connectors are another
board level interconnect that uses the fork and blade contact termination.
They provide a wide range of medium contact density patterns and meet
MIL-C-28754 standards. Daughtercard termination is through-hole, using
nickel/gold solder plated contacts. The mating interface is a blade contact which can be either parallel or perpendicular to the daughtercard.
They are available with 2, 3, 4 and 5 rows of contacts, .100 x .100 pitch.
They can be rigid pin terminated to the board or flex circuitry can be used
to attach to the board.
Both UHD and NAFI interconnects are used in military and commercial
aviation, in space applications, shipboard and in military vehicles. For
more information see catalog 12-036 at www.amphenol-abs.com or
www.amphenol-aerospace.com.
UHD Backplane Connectors on Board, Rigid Pin
Termination, with Fiber Optics, Coax or Power Contacts
NAFI Daughtercard Connector with Flex Termination
PRINTED CIRCUIT BOARD TERMINAL BLOCKS
Amphenol Pcd division supplies wire-to-board discrete-wire connections
in a variety of styles.
• Pluggable terminal blocks and headers in 3.5mm/.150” pitches in
straight, angled, with locking ears, 2-tier, 3 tier, and low profile styles.
• Fixed terminal blocks in 5.0mm, .200”, .250”, .375” pitches in standard
profiles, multi-tier, spring-clamp, high current and high voltage styles.
• Edgecard connectors that are screw terminated style in different size
pitches.
• Custom designed terminal blocks with ear mounting options, DIN-rail
mounting options, and others.
WIRING INTERFACE MODULES
Amphenol Pcd also supplies an industrial board level interconnect that
replaces discrete terminations with a single pluggable unit. Connectors
can be D-Sub, ribbon cable, RJ style, Centronic or DIN types. Also
diodes, LEDs, resistors, capacitors, relays or fuses can be included in
the unit.
For more information on terminal blocks and wiring interface modules go
online to www.amphenol-pcd.com.
48
PCB Circuit Board Terminal Blocks and Wiring Interface
Modules
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, NY 13838-1395
Phone: 607-563-5011
1-800-678-0141
Fax: 607-563-5157
Web: www.amphenol-aerospace.com
Web: www.amphenol-industrial.com
SALES OFFICES
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
23276 South Pointe Drive
Suite 113
Laguna Hills, CA 92653
Phone: 949-855-4454
1-800-678-0141
Fax: 949-855-9115
Amphenol Corporation
Amphenol Aerospace
Amphenol Industrial Operations
2010 Corporate Ridge
McLean, VA 22101
Phone: 1-800-678-0141
Amphenol Backplane Systems
18 Celina Avenue
Nashua, NH 03063
Phone: 888-318-3553
Fax: 603-883-0247
Web: www.amphenol.abs.com
Advanced Circuit Technology
118 Northeastern Boulevard
Nashua, NH 03062
Phone: 603-880-6000
Fax: 603-880-1785
Web: www.act.flexcircuit.com
Amphenol Industrial Operations
Amphenol Power Solutions
34190 Riviera Drive
Fraser, MI 48026
Phone: 586-294-7400
Fax: 586-294-7402
www.radsok.com
Amphenol Pcd
2 Technology Drive
Peabody, MA 01960
Phone: 978-532-8800
Fax: 978-532-6800
Web: www.amphenolpcd.com
Amphenol Canada
20 Melford Drive
Scarborough, ON M1B 2X6
Canada
Phone: 416-291-4401
Fax: 416-292-0647
Web: www.amphenolcanada.com
DISTRIBUTORS
Corporate Headquarters
Alphabetical Listing
ARROW ELECTRONICS
7459 S. Lima Street
Englewood, CO 80112-5816
Phone: 800-777-2776
Fax: 800-562-3542
Web: www/arrow.com
AVNET EMG
11333 Pagemill Road
Dallas, TX 75243
Phone: 800-332-8638
Fax: 214-553-2168
Web: www.avnet.com
PEI GENESIS
2180 Hornig Road,
Philadelphia, PA 19116
Phone: 800-642-8750
Fax: 215-552-8041
Web: www.peigenesis.com
POWELL ELECTRONICS
4848 S. Island Ave.
Philadelphia, PA 19153
Phone: 800-235-7880
Fax: 215-937-4655
Web: www.powell.com
TTI INC.
2441 Northeast Pkwy.
Fort Worth, TX 76106
Phone: 800-225-5884
Fax: 817-740-9494
Web: www.ttiinc.com
SMALL DISADVANTAGED/
MINORITY DISTRIBUTORS
CHEROKEE NATION
DISTRIBUTORS
Highway 51 West
Stilwell, OK 74960
Phone: 918-696-2777
Fax: 918-696-3129
Web: www.chicnd.com
JRH ELECTRONICS, INC.
2002 E. Lincoln Drive West
Rt. 73,
Marlton, NJ 08053
Phone: 800-467-9309
Fax: 609-988-8728
Web: www.jrhelec.com
INTERNATIONAL
(Military Aerospace Offices)
LATIN AMERICA
ARGENTINA
Amphenol Argentina
Avenida Callao 930
2nd floor Office B Plaza
C1023AAP Buenos Aires, Argentina
Phone: (54 11) 48 15 68 86
Fax: (54 11) 48 14 57 79
E-mail: vendas@amphenol.com.ar
BRAZIL
Amphenol do Brasil Ltda.
Rua Diogo Moreira 132
CEP 05423-010
Sao Paulo - SP, Brazil
Phone: (55-11) 3815.1003
Fax: (55-11) 3815.1629
E-mail: vendas@amphenol.com.br
MEXICO
Amphenol Mexico
Prolongacion Reforma 61-6 B2
Col. Paseo de las Lomas
C.P. 01330 Mexico D.F., Mexico
Phone: (52-55) 5258.9984
Fax: (52-55) 5081.6890
E-mail: info@amphenolmexico.com
EUROPE
ENGLAND
Amphenol Limited
Thanet Way, Whitstable
Kent CT5 3JF, United Kingdom
Phone: (44-1-227) 773200
Fax: (44-1-227) 276571
Web: www.amphenol.co.uk
FRANCE
Amphenol Socapex
Promenade de l’Arve, BP29
Thyez 74301 948 Cedex, France
Phone: (33-4) 50892800
Fax: (33-4) 5096-1941
Web: www.amphenol-socapex.com
GERMANY
Amphenol-Air LB GmbH
Am Kleinbahnhof 4
D-66740 Saarlouis, Germany
Phone: (49-6831) 9810-87
Fax: (49-6831) 9810-30
Web: www.amphenol-airlb.com
ITALY & REST OF EUROPE
Amphenol Italia S.p.A.
Via Barbaiana 5
20020 Lainate (Milano), Italy
Phone: 39-02-932541
Fax: 39-02-93254444
E-mail: info@amphenol-it.com
MIDDLE EAST / AFRICA
ISRAEL
Bar-Tec Ltd.
3 Hagavish St., P.O.B. 279
Kfir-Barkan Bldg., East Indust. Zone
Kfar Sava 44102, Israel
Phone: (972-9) 764.4100
Fax: (972-9) 7674324
E-mail: www.bar-tec.com
SOUTH AFRICA
Amphenol South Africa
30 Impala Road
2196 Sandton - Chislehurston
South Africa
Tel: (27-11) 783-9517
Fax: (27-11) 783-9519
E-mail: amphenol_africa@csi.com
TURKEY
Amphenol Turkiye Office
Ayazaga Mah. Meydan Sk. No. 28
Beybi Giz Plaza, Kat. 26 Maslak
34396 Istanbul
Phone: 90 (212) 335 25 01
Fax: 90 (212) 335 25 00
Web: www.amphenol.com.tr
E-mail: saracoglu@amphenol.com.tr
ASIA / PACIFIC
AUSTRALIA
Amphenol Australia Pty Ltd
2 Fiveways Blvd. Keysborough
Melbourne, Victoria 3173
Australia
Phone: 613 8796 8888
Fax: 613 8796 8801
E-mail: info@amphenol.com.au
RUSSIA
Amphenol Russia Office
8-2 Yaroslavskaja Str.
129164 Moscow, Russia
Phone: 7495 937 634
E-mail: russia@amphenol.com
CHINA
Amphenol Aerospace China Office
Phone: +607-563-4060
E-mail: ChinaSales@amphenol-aao.com
INDIA
Amphenol Interconnect India, Pvt, Ltd.
105 Bhosari Industrial Area
Pune, 411 026, India
Phone: (91-20) 27120 481
Fax: (91-20) 27120 581
E-mail: sales@amphenol-in.com
JAPAN
Amphenol Japan Mil Aero & Industrial
471-1, Deba, Ritto-city
Shiga 520-3041, Japan
Phone: 81-77553-8501
Fax: 81-77551-2200
KOREA
Amphenol Aerospace Korea Office
Phone: +607-563-4061
E-mail: KoreaSales@amphenol-aao.com
SOUTHEAST ASIA
Amphenol Aerospace South East Asia
Office
Phone: +607-563-4062
E-mail: SouthEastAsiaSales@amphenolaao.com
TAIWAN
Amphenol Aerospace Taiwan
Phone: +607-563-4063
E-mail: TaiwanSales@amphenolaao.com
Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are
believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors.
©2006 Amphenol Corp. Printed in U.S.A. JCP 5/2006
49
工商网监
湘ICP备2023018690号
