91-569775-08S

MIL-DTL-38999 Series III Type Connectors with PCB contacts TVP02R box mounting receptacle S 2 PLACES R1 L BLUE BAND 2 PLACES R2 ZZ RED BAND 2 PLACES .062 .001 DIA. FOR SIZE 16 CONTACTS .019 .001 DIA. FOR SIZES 20 & 22D CONTACTS .005 M TT 4 PLACES T 4 PLACES B THREAD Z PCB TAIL STICKOUT AA M LL HOW TO ORDER • Order by applicable 88/91 part number in table below. 88 prefix designates olive drab cadmium plated connector shell. 91 prefix designates electroless nickel plated connector shell. • Add insert arrangement to end of number. Refer to insert availability chart on page 4 and pin-out illustrations on pages 5-24. Last letter of part number designates rotation; P for pins in normal position, S for sockets in normal position. See page 25 for alternate rotation letter to use. Example part number: 88-569771-35P designates shell size 9 with a 9-35 insert and pin contacts in normal position. • Z dimension is determined by contact type in the insert arrangement. • Most common options are shown; other options are available. Shell Size Part Number B Thread Class 2A (Plated) 0.1P-0.3L-TS L Max. M +.000 –.005 R R 1 2 Composite Series III connectors are available; consult Amphenol, Sidney, NY. † †† S Max. T +.008 –.006 AA Max. Panel Thickness Designates true position dimensioning Red band indicates fully mated Blue band indicates rear release contact retention system Z LL +.006 –.000 TT +.008 –.006 Size 16 & 20 Contacts Size 22D Contacts 9 88/91-569771-XXX .6250 .205 .820 .719 .594 .948 .128 .234 .905 .216 .460–.375 .471–.399 11 772-XXX .7500 .205 .820 .812 .719 1.043 .128 .234 .905 .194 .460–.375 .471–.399 13 773-XXX .8750 .205 .820 .906 .812 1.137 .128 .234 .905 .194 .460–.375 .471–.399 15 774-XXX 1.0000 .205 .820 .969 .906 1.232 .128 .234 .905 .173 .460–.375 .471–.399 17 775-XXX 1.1875 .205 .820 1.062 .969 1.323 .128 .234 .905 .194 .460–.375 .471–.399 19 776-XXX 1.2500 .205 .820 1.156 1.062 1.449 .128 .234 .905 .194 .460–.375 .471–.399 21 777-XXX 1.3750 .235 .790 1.250 1.156 1.575 .128 .204 .905 .194 .460–.375 .471–.399 23 778-XXX 1.5000 .235 .790 1.375 1.250 1.701 .154 .204 .905 .242 .460–.375 .471–.399 25 779-XXX 1.6250 .235 .790 1.500 1.375 1.823 .154 .204 .905 .242 .460–.375 .471–.399 All dimensions for reference only. 37