919-416P-71A12G

NOTES: REVISIONS THIRD ANGLE PROJ. REV 1. MATERIALS AND FINISHES: BODY - BERYLLIUM COPPER, GOLD PLATING REAR BODY - BRASS, NICKEL PLATING CONTACT - BRASS, GOLD PLATING CAP - STAINLESS STEEL, PASSIVATED FERRULE - COPPER, NICKEL PLATING INSULATOR - PTFE, NATURAL INSULATOR BEAD - PTFE, NATURAL 2. ELECTRICAL: A. IMPEDANCE: 75 OHM B. FREQUENCY RANGE: DC-12 GHz C. VSWR(RETURN LOSS): 1.22 (20 dB) MAX. @ DC - 6 GHz 1.43 (15 dB) MAX. @ 6 - 12 GHz D. DIELECTRIC WITHSTANDING VOLTAGE: 500 VRMS, MIN. DESCRIPTION A RELEASE TO MFG. DATE ECN 20-Jun-19 11942 APPR EH 13.95 [.549 ] 5.15 [.203 ] 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 $ C TO +165 $ C 4. CABLE ASSEMBLY INSTRUCTIONS: A. TRIM CABLE AS SHOWN. B. SLIDE FERRULE ONTO CABLE. C. INSERT INSULATOR BEAD ONTO CENTER CONDUCTOR. D. INSERT CABLE WITH INSULATOR BEAD INTO CONNECTOR WITH FOIL ENTERING CONNECTOR AND BRAID OVER KNURL. E. SOLDER CONTACT TO CABLE CENTER CONDUCTOR. F. CRIMP FERRULE WITH .216" HEX DIE. G. ASSEMBLE CAP TO BODY WITH 5 IN-LBS MAX TORQUE. 2.9 [.114 ] 5. SHOWS CABLE ENTRY DIMENSIONS. 6. PACKAGING: A. QUANTITY: SINGLE PACK B. MARKING: PACKAGING TO BE MARKED "AMPHENOL RF, 919-416P-71A12G , AND DATE CODE" DIELECTRIC AND FOIL 15.6 REF [.614 ] RECOMMENDED CABLE STRIPPING DIMENSIONS CAP SCALE 5 3.1 [.122 ] FERRULE 3.000 5 4.32 [.170 ] INSULATOR BEAD 11.2 REF [.441 ] 7.95 REF [.313 ] 12.35 REF [.486 ] UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: