920-504J-52P

HD-EFI Product Series 50 Ohm Micro-Miniature Interface Overview The HD-EFI product series is a micro-miniature interface designed to allow large board tolerance stack ups, blind mating, and multiple RF lines. This is achieved by maximizing radial and axial float while maintaining high frequency RF performance. HD-EFI PCB jacks are available in through-hole, surface mount, and edge launch designs. The three-piece mating system uses a limited detent and a smooth bore PCB connector, joined by a floating bullet adapter in between. The generous gathering cone and unique bullet design allows for 1.4mm of axial float, and 1.4mm of radial float, with a maximum float angle of 5 degrees. These 50 ohm products have an operating frequency of DC to 6 GHz, making them ideal for high-performance applications with a small package size. The selection of PCB mounts and bullet lengths offer versatility for board launches and PCB stacking configurations. HD-EFI bullet adapters are uniquely designed to provide a crash-proof mating, facilitated by the extension of the insulator beyond the adapter body. Used in conjunction with the smooth bore connectors, the mating system allows for easy alignment and a secure connection. Ordering Information PCB Mount Jack, Male Contact Smooth Bore Limited Detent Surface Mount 920-501J-53P 920-502J-52P Through Hole 920-503J-53P 920-504J-52P Edge Mount 920-508J-53P 920-507J-52P Features and Benefits Designed to maximize radial and axial float in board-to-board applications • Available in through-hole, surface mount, and edge launch configurations • Provides crash-proof mating • Applications 920-503J-53P 920-504J-52P 920-508J-53P Bullet Adapter, Female Contact Part Number Description PCB Spacing 920-505A-51S Bullet Adapter, 8.38mm 12.12mm 920-506A-51S Bullet Adapter, 7.72mm 11.46mm 920-509A-52S Bullet Adapter, 13.02mm 16.76mm • Wireless Base Station Equipment • Backplane Design • Multiple Board to Board Connections • Complex PCB Stack-ups 920-505A-51S Amphenol RF Four Old Newtown Road Danbury, CT 06810 For more information visit www.amphenolrf.com or call 800.627.7100 920-506A-51S 920-509A-51S Technical Specifications Electrical Impedance 50 Ω Frequency Range DC - 6 GHz Voltage Rating 335 VRMS Dielectric Withstanding Voltage Contact Resistance 1000 VOLTS Center Contact 5 mΩ Max (Initial) Outer Contact 5 mΩ Max (Initial) Insulator Resistance VSWR (Mated Solution) Insertion Loss (Mated Solution) 5000 MΩ Min DC - 3 GHz 1.21 Max 3 - 6 GHz 1.24 Max DC - 3 GHz 3 - 6 GHz Isolation 3rd Order Intermodulation -0.14dB -0.27dB 70dB Min @ Up to 4 GHz @ 8mm Pitch 930 & 955 MHz (2X43 dBm) Power Handling -163dBc Max (Low PIM Design) 40 W @ 2.6 GHz @ 95⁰ C Tested 120 W @ 2.5 GHz @ 95⁰ C Tested Mechanical Interface Mating Forces Engagement Disengagement Connector Durability 12 N Max (Smoothe Bore), 25 N Max (Limited Detent) 2 - 6 N (Smooth Bore), 9 N Min (Limited Detent) 50 Cycles Min. (Limited Detent) 200 Cycles Min. (Brass Housing) (Smooth Bore) Center Pin Mating Forces Outer Contact Mating Forces Mechanical Misalignment Engagement 3 N Max (Ø 0.52mm Max Pin with Chamfer) Disengagement 0.2 N Min (Ø 0.48mm Min Pin with Chamfer) Engagement 8 N Max (Ø 3.52mm Min Hole with Chamfer) Disengagement 1 N Min (Ø 3.58mm Min Hole with Chamfer) Axial Radial Max Floating Angle ±0.7 mm ±0.7 mm 5⁰ Surface Mount Parts, 3.5⁰ Through-hole Mount Parts Min Board to Board Distance 11.46 mm Environmental Temperature Range -45⁰C To 125⁰C Thermal Shock MIL-STD-202, Method 107, condition B Corrosion Resistance MIL-STD-202, Method 101, condition B Humidity/Temperature Cycling MIL-STD-202, Method 106, condition A Temperature Life 250 Hours at 125⁰ C No Damage to Parts Vibration MIL-STD-202, Method 204, condition B Mechanical Shock MIL-STD-202, Method 213, condition A Materials Body Outer Contacts Center Contacts Brass, Gold Plated Contact Beryllium Copper, White Bronze Plated Stamped Version Beryllium Copper, White Bronze Plated Female Male Stamped Version Insulators Bullet PCB Surface/Through-Hole Mount PCB Edge Mount Amphenol RF Four Old Newtown Road Danbury, CT 06810 For more information visit www.amphenolrf.com or call 800.627.7100 Beryllium Copper Heat Treated, Gold Plated Brass, Gold Plated Copper Alloy, Gold Plated POM, Natural LCP, Natural PTFE, Natural