925-118C-51S.

SMPM Connectors Ordering Information SMPM PCB Jacks, Male Contact 925-144J-51P 925-123C-51A Overview Full Detent Smooth Bore Surface Mount 925-143J-51P 925-144J-51P Through Hole 925-138J-51S 925-137J-51S Right-Angle 925-140J-51S 925-139J-51S Edge Mount 925-126J-51P The SMPM product series is a micro-miniature interface with a frequency range of DC to 65 GHz. It is commonly used in miniaturized high frequency coaxial applications and is offered in full detent and smooth bore products providing secure engagement/disengagement forces. This family of interconnects addresses small package design needs. It can be utilized for high speed signal transmission applications or in blind-mate, board-to-board systems using a floating bullet. This floating bullet provides a link between mated pairs and compensates for both radial and axial misalignment. With a cable-to-board mated pair, the plug side is available in either right angle or straight configurations with terminations to both 0.047” and 0.086” semi-rigid or conformable coax, or RG-178. The PCB receptacles are designed for surface, through hole, or end launch mounting. 925-118C-51S 925-127P-51P 925-143J-51P SMPM Plugs, Female Contact Straight Right Angle 0.047" Semi-Rigid 925-124P-51S 925-120C-51R 0.086" Semi-Rigid 925-118C-51S 925-123C-51R RG-178 925-129C-51S 925-128C-51R PCB Edge Mount 925-127P-51P SMPM Bulkhead Cable Jacks, Male Contact Straight Features and Benefits • RF performance DC to 65 GHz • Small package size • Push-on and snap-on mating styles for quick 0.047" Semi-Rigid 925-134J-51S 0.086" Semi-Rigid 925-135J-51S RG-178 925-136J-51S installation • Board to board minimum spacing: 8.65 mm Applications • Antennas • Back plane • Broadband • Wireless • Military • Instrumentation Amphenol RF Four Old Newtown Road Danbury, CT 06810 For more information visit www.amphenolrf.com or call 800.627.7100 925-134J-51S 925-136J-51S 925-106A-51S SMPM Bullet Adapters Part Number Bullet Length Min PCB Spacing 925-106A-51S 0.210" (5.33mm) 0.341" (8.65mm) 925-141A-51S 0.278" (7.06mm) 0.409" (10.38mm) 925-142A-51S 0.330" (8.38mm) 0.461" (11.70mm) Electrical Impedance Frequency Range Return loss (edge mount PCB) Insertion loss Insulation resistance Center contact resistance Outer contact resistance Dielectric Withstanding Voltage Contact current RF leakage - Interface 50 Ω DC to 26.5 GHz, Typical Extended performance to 65 GHz 1.15:1 Max @ DC to 10 GHz 1.25:1 Max @ 10 to 26.5 GHz 1.35:1 Max @ 26.5 to 40 GHz ≤ 0.03 x SQRT[f (GHz)] dB ≥ 5 GΩ ≤ 6 mΩ ≤ 2 mΩ 335 VRMS min. ≤ 15 A DC ≥ 80 dB @ DC to 4 GHz Mechanical data Mating cycles Center contact captivation Engagement force Disengagement force Axial misalignment Radial misalignment Board-to-board distance (min.) Full detent: ≥ 100 Limited detent: ≥ 100 Smooth bore, Catcher’s mitt: ≥ 1000 axial: ≥ 1.5 lbs. (6.7 N) typical Full Detent: 4.5 lbs (20 N) typical Smooth Bore: 2.5 lbs (11.1 N) typical Full detent: ≥ 6.5 lbs (28.9 N) typical Smooth bore: ≥ 1.5 lbs (6.7 N) typical ± .25 mm ± .51 mm 8.65 mm (solder paste thickness not included) Environmental data Temperature range Thermal shock Climatic category Vibration Shock Max. soldering temperature (PCB connectors) -65 °C to +165 °C IEC 60169-1, Sub-clause 16.4 (-65 °C to +165 °C) IEC 60169-1, Sub-clause 18 (+165 °C, 1000 hours) IEC 60068-2-64 random IEC 60068-2-27 (50g, 11 ms, half-sine) IEC 61760-1, +260 °C for 10 sec.