®
Amphenol 97 Series
Standard Cylindrical Connector
12-022-14
MIL-5015 Style Connectors
widely used for:
•
•
•
•
Factory Automation, Robotics
Machine Tool, Instrumentation
Welding Equipment
Medical Equipment
Amphenol® 97 Series Connectors are
UL recognized and CSA recognized.
Amphenol
97 series crimp type
how to order
Example of part number for crimp type connectors is given below.
-
4101
A – 28 – 21
S
Y
(621)
Shell Finish Suffix
Omit for standard O.D.
cadmium finish
(604) Gray anodized
(608) Black anodized
(624) Green zinc alloy
(639) Clear cadmium
(640) Conductive black zinc alloy
(689) Electroless nickel
Series Number
97 - designates
AMPHENOL 97 Series
Shell Type
4100 Wall Receptacle
4101 Cable Receptacle
4102 Box Receptacle
4106 Straight Plug
4107 Quick Disconnect Plug
4108 Angle Plug
OR
RoHS Compliant Suffix
(621) Black zinc alloy
plating
Note: “4” in part number
designates crimp contact rear
release connector
pheno
l
Am
HS
Ro
E
U
Shell Construction
A - Solid Backshell
B - Split Backshell
C
97
E
/2
002 / 95 /
Alternate Insert Positions
Omit for standard position
W, X, Y or Z for alternate positions,
depending on insert (see page 21 for
positions available)
Shell Size
10SL, 12S, 14S, 16S, 18, 20,
22, 24, 28, 32, 36
Contact Type*
P = Pin
S = Socket
Insert Configuration Number
See insert availability listing - page 21,
and see insert arrangement illustrations pages 22 and 23.
* Contacts are not supplied with connectors, and
must be ordered separately. See following pages
for contact information.
Note:
Accessories for 97 Series Connectors should be
ordered with matching connector plating. See
accessory pages 33-39.
27
Amphenol ® 97 Series Connectors
provide the interconnection solution for low cost,
general duty applications
Amphenol offers the 97 Series Connector Family A general duty standard cylindrical connector,
MIL-5015 style.
The 97 Series is a widely used connector series for the automotive, robotics, machine tool and welding industries, as well
as numerous other commercial applications from heavy equipment to ECG monitoring cables.
Shell components are fabricated from high grade aluminum
alloy to provide strength and environmental protection. This
family of connectors offers a wide variety of shell styles, contact patterns and accessory options.
The Amphenol® 97 Series
design features and benefits:
• Low cost, general duty
non-environmental
• Environmental capability with
the 417 suffix plus 9767 cable
clamp (see page 34)
• Solder or crimp termination
• UL Recognized, CSA Recognized
• Wide selection of shell styles and insert patterns
• Wide selection of connector finishes cadmium or non-cadmium (environmentally friendly zinc alloy)
• Threaded coupling, hard dielectric inserts
• Solid or split shell construction
• Accessories for both individual wire seal and jacketed cable
RoHS COMPLIANT PRODUCT
AVAILABLE – Consult
Amphenol Industrial Operations.
pheno
l
Am
E
U
C
HS
Ro
E
/2
002 / 95 /
For additional information on Amphenol® 97 Series connectors, or for special application
requirements, contact your local Amphenol sales office, authorized distributor, or Amphenol Corporation
Amphenol Industrial Operations
40-60 Delaware Avenue
Sidney, New York 13838-1395
Telephone: 607-563-5011
Fax: 607-563-5157
Web site: www.amphenol-industrial.com
1
Guide to Selecting a Connector
In selecting a connector, it first must be
determined if a non-environmental 97
A or B Series 5015 type is required or if
an environmental MS-5015 Class E, F,
or R type* is required.
If determined that the general duty,
non-environmental 97 series is the
choice - then this catalog is appropriate
to your needs
The following 8 steps apply to formulation of a part number.**
1
How many wires are you
going to connect?
What gauge?
These two questions are important,
because they indicate which insert you
need. There are literally hundreds to
choose from.
The insert arrangements for solder
contact connectors are illustrated on
pages 6-11. The inserts most often
used are highlighted on these pages.
Here’s an example of how to choose
an insert arrangement. Say you want to
connect eight 16-ga. wires, - first find
the section of arrangements containing 8 contacts. Insert number 20-7 is
the one you want because it contains
eight 16-ga. contacts and it is one of
the most often used. The one you
choose might depend on your space or
voltage requirements. The voltage
capacity of each insert is listed under
its diagram.
If you have more than one wire size
to connect, the method is essentially
the same. Actually, the insert configurations for multiple-size wires are a lot
more flexible than they appear. That’s
because you can always solder a
smaller wire to a larger contact. However, soldering a large wire to a small
contact isn’t recommended because of
size and current requirements.
2
What if several identical
connectors have different
functions?
Here’s a situation to watch out for. You
have four identical receptacles on a
panel. One carries high current loads.
The others have low current functions.
A plug mated with the wrong receptacle
(cross-mating) could ruin your valuable equipment.
To avoid cross-mating, you can
order identical inserts positioned in
both the plugs and receptacles at various angles from standard. These variations from standard position are called
alternate insert positions, and are
described on page 12.
3
What kind of receptacle do
you need?
For Wall Mounting Use a wall receptacle, type 3100. The elongated back of
this receptacle extends through thick
wall material. It is threaded to accept
standard hardware fittings.
For Unmounted Applications Use
the cable receptacle, type 3101.
For Box or Panel Mounting Use the
box receptacle, type 3102. This receptacle’s back is short to conserve space.
It is not threaded on the back end and
is used when no accessories such as
clamps are needed.
4
What kind of plug do you
need?
For ordinary situations The straight
plug, type 3106 meets most connector
requirements. However . . .
when space is critical you may want
to consider using an angle plug, type
3108. This type plug lets the cable
enter your equipment at a right angle.
5
Do you need a plug with a
Solid or Split back shell?
You can get both straight and angle
plugs in solid or split back shell
designs. With the solid shell you have
greater strength and you save space.
On the other hand, the split shell
design lets you quickly inspect the solder terminals when you need to. This
feature could be important if you’ll be
subjecting the connector to rough handling and heavy use.
The designation to use for solid
shell construction is the letter A. This
designation letter goes immediately
* If an environmental type MIL-5015 E, F or R Class is required, then the
catalog that should be consulted is 12-020, MS/Standard MIL-5015
Cylindrical Connectors. See www.amphenol-industrial.com for on-line
catalogs or contact Amphenol, Sidney, NY.
2
after the main shell type number: for
example, 3106A or 3108A.
The designation for split shell construction is the letter B; for example, 3106B
or 3108B.
Because of application, receptacles
are made in solid backshell construction only. Their designation is 3100A,
3101A. (See how to order for solder
contact connectors, page 19.
6
Which connector gets the
socket? - the receptacle or
the plug?
You’re at the point where you designate which inserts are used with which
shells. Either pin or socket inserts can
be used with plugs or receptacles.
Here’s a good rule of thumb. Order
the sockets for the connector at the
“hot” side of the circuit. By having sockets at the power source, there’s little
chance that a wayward finger or screwdriver will short the circuit or cause personal injury.
The designation for sockets is simply S in a part number, following the
insert code number. For pins, the designation is P. Therefore, the 20-7P
insert would have pin contacts, while
the 20-7S insert would have socket
contacts.
7
What type of plating is preferred?
If you prefer the standard olive cadmium, non-reflective, electrically conductive finish, then no suffix number is
required. Other plating variations are
available, including environmentally
friendly zinc alloy. See how to order
instructions for the various plating finishes offered for 97 Series solder connectors on page 19.
8
Do you need any
accessories?
Accessories - cable clamps, protection
caps and chains, conduit adapters, and
panel gaskets are shown on pages 3339.
** These steps are for solder type connectors which are described in
detail on pages 3-19. If a crimp type connector is needed, the same
steps apply, however, you should consult pages 20-29 for details on 97
Series connectors with crimp contacts.
Amphenol ® 97 Series Connectors
with rear release crimp contacts
DESIGN CHARACTERISTICS
• Rugged metal shell
• Conductive finish
• Stamped & formed crimp contacts
• Closed entry socket contacts
• Plastic retention
• Utilizes standard 97 Series hardware
• Intermateable and intermountable with existing
97 Series and MIL-5015 connectors
• Underwriters Laboratories approved recognition File E115497
97-4100A
97-4107A
• Canadian Standards Association Certification
File LR69183
CUSTOMER OPTIONS
• Positive self-centering of contacts; pins bent up
to 20° will pick up
• Reduced user cost due to high speed
termination
97-4101A
• Less equipment down-time due to fatigue failure at wire contact junction or handling damage
• Greater contact to contact insulation, lighter
weight, higher reliability
• No costly re-design or rework necessary on
existing equipment
97-4107B
97-4102A
• Complete flexibility through multi-source product availability
The Amphenol 97-410X connector design incorporates
Poke Home® Rear Release contacts. The 97 Series Rear
Release line is intermateable and intermountable with
existing 97 Series and MIL-5015 type shell styles in both
plugs and receptacles. The connectors utilize 97 Series
bright cadmium plated shells and standard insert configurations.
97-4108A
97-4106A
The connector is designed to be used with stamped and
formed type crimp contacts. Contact design (size 16 only)
incorporates insulation crimp support for greater strength
at wire termination end. Contacts are available on reel
assemblies for use with the high speed Amphenol stripper crimper capable of crimping 1500 contacts per hour.
Hand crimp tools and bulk packaged contacts are also
available.
97-4108B
Standard hardware available for the 97 Series connector
can be used with the 97 Series crimp contact rear release
line. Accessories should be ordered with the appropriate
deviation number to match the bright cadmium connector
finish. See how to order, page 27, for 97 Series connectors with crimp contacts.
97-4106B
20
97 series crimp type
specifications, insert availability,
alternate insert positioning
Specifications
CL normal
Standard shell finish - clear chromate over cadmium plate
(optional plating available, see how to order page 27).
Inserts - molded of a 94V-O Underwriters Laboratory rated
material.
W
Z
X
Y
Contacts - copper alloy formed, silver plated (gold plating is
also available, see how to order page 28).
Wire sizes - 12 AWG through 30 AWG.
FRONT FACE OF PIN INSERT
All constructions perform satisfactorily from –55°C to
+125°C ( –67°F to +257°F).
Alternate Insert Positioning
Insert
Number
Total
Contacts
Mechanical
Spacing
Inches
mm
Service
Rating
W
X
Y
Z
Contact Size
12S-3
70
145
215
290
12
14S-2
14S-5
14S-7
–
–
90
120
110
180
240
–
270
–
–
–
16S-1
16S-8
80
–
–
170
–
265
280
–
18-1
18-4
18-11
18-12
18-19
18-20
70
35
–
80
–
90
145
110
170
–
120
180
215
250
265
–
240
270
290
325
–
280
–
–
45
80
35
80
110
110
110
–
250
250
250
–
–
280
325
280
16
10SL-3
3
1/16
1.57
A
10SL-4
2
1/16
1.57
A
2
12S-3
2
1/16
1.57
A
2
14S-1
3
1/16
1.57
A
3
14S-2
4
INST.
4
14S-5
5
INST.
5
14S-7
3
1/16
1.57
A
3
16S-1
7
1/16
1.57
A
7
16S-8
5
1/16
1.57
A
5
18-1
10
1/16
1.57
A
4
18-4
4
1/8
3.18
Degrees
Insert
Arrangement
Insert Availability
3
INST.
6
20-4
20-7
20-27
20-29
D
4
22-14
80
–
–
280
24-2
80
–
–
280
28-9
28-11
28-12
28-20
28-21
80
80
90
80
80
110
110
180
110
110
250
250
270
250
250
280
280
–
280
280
32-8
32-414*
80
80*
125
110*
235
250*
280
280*
36-10
80
125
235
280
18-11
5
1/16
1.57
A
18-12
6
1/16
1.57
A
5
6
18-19
10
1/16
1.57
A
10
18-20
5
1/16
1.57
A
20-4
4
1/8
3.18
D
20-7
8
1/8
3.18
D
4
1/16
1.57
A
4
20-27
14
1/16
1.57
A
14
5
4
20-29
17
1/16
1.57
A
22-14
19
1/16
1.57
A
24-2
7
1/8
3.18
D
7
4
* Rotates opposite above illustration.
17
19
28-11
22
1/16
1.57
A
28-12
26
1/16
1.57
A
18
28-20
14
1/16
1.57
A
28-21
37
1/16
1.57
A
37
32-414
52
1/16
1.57
A
52
36-10
48
1/16
1.57
A
48
26
10
4
21
97 series crimp type
insert arrangements
Front view of pin insert or rear of socket insert illustrated.
2 Contacts
3 Contacts
AB
Insert Arrangement
Contacts
Service Rating
B A
10SL-4
2#16
A
C
B
12S-3
2#16
A
10SL-3
3#16
A
4 Contacts
C
D
B
C
14S-2
4#16
INST.
D
A
B
A
C
18-4
4#16
D
D
B
B
14S-1
3#16
A
A
E
E
A
D
B
C
14S-7
3#16
A
C
D
B
14S-5
5#16
INST.
16S-8
5#16
A
7 Contacts
E
D
F
B
18-12
6#16
A
F
D
K J
18-11
5#12
A
D
18-20
5#16
A
E
C
J
I
G
M
G
F
E
17 Contacts
H
B
J
N
18-19
10#16
A
20-27
14#16
A
22
A
K
B
G
M
LC
D
D
20-7
8#16
A, B, H, G = D;
C, D, E, F = A
A
K
H N
B
C
F
P
L
C
F
E
18-1
10#16
B, C, F, G = A;
all others = INST.
C
E
H
24-2
7#12
D
B A
D E F C
H
C
G
B
14 Contacts
H
A
I
G J
B
C
F
D
E
A
A
A
A
G
E
16S-1
7#16
A
10 Contacts
B
E
8 Contacts
A
F G B
E
C
D
A
C
Insert Arrangement
Contacts
Service Rating
C A
B
B
20-4
4#12
D
6 Contacts
Insert Arrangement
Contacts
Service Rating
C A
5 Contacts
DA
Insert Arrangement
Contacts
Service Rating
A
D
28-20
10#12, 4#16
A
A B
M
C
L T N P D
K
J SR F
H G
20-29
17#16
A
E
97 series crimp type
insert arrangements, cont.
Front view of pin insert or rear of socket insert illustrated.
19 Contacts
22 Contacts
N
M
L
A
K U N B
V
P C
T
J
S R
H
D
G
E
F
Insert Arrangement
Contacts
Service Rating
26 Contacts
U
V
W
X
22-14
19#16
A
J
48 Contacts
K
T
X
J
B
U C
V D
d
Y
L
A
S
b
M Z
W
H G
E
F
28-12
26#16
A
52 Contacts
AB CD
E F G H J
K L M N P R
S T U V W X Z
b c d e f
a
h
k
j
g
m
n
s
p r
A
B
C D E F G
J
K
L
M N
H
P Q R S T
O
U
W X Y Z a b
V
c
h
e f
g
d
n p q rj k
m
s
v
t u
w x
y
z
28-21
37#16
A
36-10
48#16
A
Insert Arrangement
Contacts
Service Rating
a
N
P
F A
K
G B
R
C
S L H
D
T M I
28-11
4#12, 18#16
A
37 Contacts
R
P
E
C B
D H G F A
E
P N M L
Q
K
W V U T S
X
R
e d c b a Z
f
Y
m
h
l
k
j
n
g
u
t s r p
v
z y x w
2
6
3
5 4
J
32-414
52#16
A
CONTACT LEGEND
16
Current Ratings
Wire Size
12
14
16
18
20
22
26
28
30
Amperes
23
17
13
10
7.5
5
2
1.5
1.0
NOTE: Design specifications subject to change.
Consult Amphenol, Sidney, NY for the latest specifications
and UL and CSA recognition.
Service Rating
Service
Rating
Recommended Operating Voltage* at Sea Level
DC
AC (RMS)
INST.
250
200
A
700
500
D
1250
900
* The values listed represent operating values which include a
generous safety factor.
23
12
97 series crimp type
receptacles
97-4100A wall mount receptacle
97-4101A cable receptacle
97-4102A box receptacle
Solid shell construction is strong and conserves space. Includes integral polarizing
key in front. Back shell is threaded for standard MS/AN fittings.
Solid shell construction is strong and conserves space. Includes integral polarizing key
in front shell. Machined back shell is threaded
for standard MS/AN fittings. Can be
unscrewed for inspection or soldering
Solid shell designed for open wiring.
Mounts directly on chassis, equipment or
panel. Includes internal polarized key in
front shell.
L
M
R
N
Mounting
Holes
.173 (4.394) DIA.
FOR SIZE 32 AND 36
.147 (3.734) DIA.
FOR SIZES 24 AND 28
.120 (3.048) DIA.
FOR ALL OTHER SIZES
M
Panel Opening
R S
N
S
R
L
L
Mounting Holes
S
R
S
N
V
K
K
V
A
O
A
A
97-4100A and 97-4101A
Connector
Size
A
Coupling
Thread
K Ref.
L Max.
Inch
mm
Inch
M Ref.
mm
Inch
N Ref.
mm
Inch
O Ref.
mm
Inch
mm
R Ref.
Inch
S Ref.
mm
Inch
mm
V
Fitting Threads
10SL
5/8-24
5/64
1.98
1-9/32
32.53 9/16
14.27
3/4
19.05
.812 20.62
23/32
18.24
1
25.40
5/8-24
12S
3/4-20
5/64
1.98
1-15/32
37.29 9/16
14.27
25/32
19.84
.812 20.62
13/16
20.62
1-3/32
27.76
5/8-24
14S
7/8-20
5/64
1.98
1-15/32
37.39 9/16
14.27
7/8
22.23
.938 23.83
29/32
23.01
1-3/16
30.15
3/4-20
16S
18
1
-20
1-1/8-18
5/64
1/8
1.98
3.18
1-15/32
1-63/64
37.39 9/16
50.24 3/4
14.27
19.05
1
1-1/8
25.40
28.58
1.062 26.97
1.188 30.18
31/32
1-1/16
24.59
26.97
1-9/32
1-3/8
32.54
34.93
7/8-20
1
-20
20
1-1/4-18
1/8
3.18
1-57/64
47.85 3/4
19.05
1-1/4
31.75
1.312 33.32
1-5/32
29.36
1-1/2
38.10
1-3/16-18
22
1-3/8-18
1/8
3.18
1-63/64
50.24 3/4
19.05
1-3/8
34.93
1.438 36.53
1-1/4
31.75
1-5/8
39.67
1-3/16-18
24
28
1-1/2-18
1-3/4-18
1/8
1/8
3.18
3.18
2-14
2-1/4
57.15 13/16 20.62
57.15 13/16 20.62
1-1/2
1-3/4
38.10
44.45
1.562 36.67
1.812 46.02
1-3/8
1-9/16
34.43
39.67
1-3/4
2
44.45
50.80
1-7/16-18
1-7/16-18
32
2
-18
1/8
3.18
2-3/8
60.33 7/8
22.23
2-1/32
51.59
2.062 52.37
1-3/4
44.45
2-1/4
57.15
1-3/4-18
36
2-1/4-16
1/8
3.18
2-3/8
60.33 7/8
22.23
2-1/4
57.15
2.312 58.72
1-15/16
49.20
2-1/2
63.50
2
A
Coupling
Thread
Inch
mm
Inch
mm
Inch
97-4102A
Connector
Size
K Ref.
L Max.
M Ref.
mm
Inch
N Ref.
mm
Inch
O Ref.
mm
Inch
mm
R Ref.
Inch
S Ref.
mm
10SL
5/8-24
5/64
1.98
61/64
24.21 35/64 13.87
11/16
17.48
.812 20.62
23/32
18.24
1
25.40
12S
14S
3/4-20
7/8-20
5/64
5/64
1.98
1.98
31/32
61/64
24.61 9/16
24.21 9/16
11/16
3/4
17.45
19.05
.812 20.62
.938 23.83
13/16
29/32
20.62
23.01
1-3/32
1-3/16
27.76
30.15
32.54
16S
1
-20
14.27
14.27
5/64
1.98
61/64
24.21 9/16
14.27
7/8
22.23
1.062 26.97
31/32
24.59
1-9/32
18
1-1/8-18
1/8
3.18
1-3/8
34.92 3/4
19.05
1
25.40
1.188 30.18
1-1/16
26.97
1-3/8
34.93
20
22
1-1/4-18
1-3/8-18
1/8
1/8
3.18
3.18
1-3/8
1-3/8
34.92 3/4
34.92 3/4
19.05
19.05
1-1/8
1-1/4
28.58
31.75
1.312 33.32
1.438 36.53
1-5/32
1-1/4
29.36
31.75
1-1/2
1-5/8
38.10
41.28
24
1-1/2-18
1/8
3.18
1-3/8
34.92 13/16 20.62
1-3/8
34.93
1.562 39.67
1-3/8
34.93
1-3/4
44.45
28
1-3/4-18
1/8
3.18
1-3/8
34.92 13/16 20.62
1-5/8
41.28
1.812 46.02
1-9/16
39.67
2
50.80
32
36
2
-18
2-1/4-16
1/8
1/8
3.18
3.18
1-15/32
1-15/32
37.31 7/8
37.31 7/8
1-29/32
2-1/8
48.41
53.98
2.062 52.37
2.312 58.72
1-3/4
1-15/16
44.45
49.20
2-1/4
2-1/2
57.15
63.50
22.23
22.23
24
-18
97 series crimp type
plugs with solid shells
97-4106A
Connector
Size
L Max.
N Ref.
Inch
mm
Inch
Q Max.
mm
Inch
mm
V
Fitting Threads
10SL
1-3/8
34.93
3/4
19.05
7/8
22.23
5/8-24
12S
1-7/16
36.50
25/32
19.84
1
25.40
5/8-24
14S
16S
1-15/32
1-15/32
37.13
37.13
7/8
1
22.23
25.40
1-1/8
1-1/4
28.58
31.75
3/4-20
7/8-20
18
1-31/32
49.88
1-1/8
28.57
1-11/32
34.11
1 -20
20
1-7/8
47.50
1-1/4
31.75
1-15/32
37.29
1-3/16-18
22
24
1-31/32
2-1/4
49.88
57.15
1-3/8
1-1/2
34.93
38.10
1-19/32
1-23/32
40.46
43.64
1-3/16-18
1-7/16-18
28
2-1/4
57.15
1-3/4
44.45
1-31/32
49.99
1-7/16-18
32
2-3/8
60.33
2-1/32
51.59
2-7/32
56.34
1-3/4-18
36
2-3/8
60.33
2-1/4
57.15
2-15/32
62.69
2
97-4106A straight plug
Sturdy, simple to assemble. Coupling ring
machined from solid aluminum bar stock for
high tensile strength. Mates with all types of
MS receptacles. Front shell includes polarizing keyway. Back shell is threaded for standard MS/AN fittings.
L
-18
Q N
97-4107A
Connector
Size
L Max.
N Ref.
Inch
mm
Inch
Q Max.
mm
Inch
mm
V
Fitting Threads
10SL
1-3/8
34.92
3/4
19.05
7/8
22.23
5/8-24
12S
1-7/16
36.50
25/32
19.84
1
25.40
5/8-24
14S
16S
1-15/32
1-15/32
37.13
37.13
7/8
1
22.23
25.40
1-1/8
1-1/4
38.58
31.75
3/4-20
7/8-20
16
1-7/8
47.47
1
25.40
1-1/4
31.75
18
1-31/32
49.88
1-1/8
28.58
1-11/32
34.11
20
22
1-7/8
1-31/32
47.50
49.88
1-1/4
1-3/8
31.75
34.93
1-15/32
1-19/32
37.29
40.46
1-3/16-18
1-3/16-18
24
2-1/4
57.15
1-1/2
38.10
1-23/32
43.64
1-7/16-18
28
2-1/4
57.15
1-3/4
44.45
1-31/32
49.99
1-7/16-18
V
7/8-20
1
-20
97-4107A quick-disconnect plug
For fast connect/disconnect applications.
Front shell has polarizing keyway. Mates
with all types of MS receptacles. Back shell
is threaded for standard MS/AN fittings
97-4108A
Connector
Size
L Ref.
Inch
Q Max.
mm
Inch
U Ref.
mm
Inch
mm
Y Ref.
V
Fitting Threads
Inch
L
mm
10SL
1-5/16
33.32
7/8
22.23
1
25.40
5/8-24
1-1/16
26.97
12S
1-3/8
34.93
1
25.40
1
25.40
5/8-24
1-1/16
26.97
14S
16S
1-3/8
1-1/2
34.93
38.10
1-1/8
1-1/4
28.58
31.75
1
1-1/8
25.40
28.58
3/4-20
7/8-20
1-1/16
1-5/16
26.97
33.32
18
1-15/16
49.20
1-11/32
34.11
1-1/8
28.58
1 -20
1-5/16
33.32
20
2-1/16
52.37
1-15/32
37.29
1-5/16
33.32
1-3/16-18
1-5/8
42.28
22
24
2-1/16
2-15/32
52.37
62.69
1-19/32
1-23/32
40.46
43.64
1-5/16
1-1/2
33.32
38.10
1-3/16-18
1-7/16-18
1-5/8
2
42.28
50.80
28
2-15/32
62.69
1-31/32
49.99
1-1/2
38.10
1-7/16-18
2
50.80
Q
N
V
97-4108A angle plug
For use where space in front of panel or wall
is at a premium. Swivel ring and plate combination allow cable take off at any angle relative to front shell polarizing key. Back shell
is threaded for standard MS/AN fittings.
L
Y
Q
U
V
25
Y
