A2-1OM14-005MC

4 3 2 1 REVISION HISTORY – ALL SHEETS ARE AT THE SAME REVISION NOTES: REV DESCRIPTION DATE - INITIAL RELEASE 2021/10/05 1) PART NUMBER DEFINITION: APPROVED A 2 - 1 A A AB - X X X YP Z REEL SIZE IS DETERMINED BY LENGTH OF CABLE BLANK : NO REEL B: BLACK REEL, T: TAN REEL, D: OLIVE DRAB REEL D D PINOUT S: STRAIGHT, C: CROSS MEASUREMENT UNIT I: INCH, F: FEET, M: METER, K: LENGTH (EX: 008F IS 8 FEET, 01KM IS 1000M) CHANNEL (2, 4) CABLE TYPE (OS1, OM1, OM4) 2) KITTING REQUIREMENT: a. CUT CABLE TO MAX OVERALL LENGTH (LENGTH + TOLERANCE). b. TOLERANCE SHALL BE: C LENGTH (L) L ≤ 15 FT 15 FT ≤ L ≤ 150 FT L > 150 FT TOLERANCE +0.5/-0.0 FT +1.0/-0.0 FT +4.0/-0.0 FT C c. LEAVE ABOUT 10 FEET OF CABLE ON THIS END PRIOR TO SPOOLING. d. ASSEMBLY > 150 FEET SHOULD BE PUT ON THE REEL. 3) LABEL REQUIREMENT: a. LABELS ARE M23053/5, WHITE. ACCEPTABLE SUBSTITUTION IS DAT-38-292 OR TRANSVINYL (DAT-63-292-2.5). b. MARKING ORIENTATION IS OPTIONAL. c. INSTALL ONLY 1 LABEL APPROXIMATELY AT CENTER IF CABLE < 6 FEET. B B MATERIAL: DFTR/Designer: C. Hoang 2021/05/13 Check By: S. McEwan A 2021/05/21 Manufacturing: L. Dillman DRILLED HOLE DIAMETER TOLERANCE Ø.000 TO Ø.125 Ø.126 TO Ø.250 +.004 -.001 +.005 -.001 Ø.251 TO Ø.500 Ø.501 TO Ø.750 +.006 -.001 +.008 -.001 DO NOT SCALE DRAWING UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NEXT ASSY USED ON TOL ON ANGLES ±3° 1 PL ±.1 APPLICATION 4 3 2 PL ±.02 3 PL ±.010 INTERPRET DIM AND TOL PER ASME 14.5M-1994 2021/10/05 A TITLE: Market Manager/PLM: M. Beard 2021/10/01 TFOCA-II PLUG TO PLUG ASSEMBLY Configuration Management: E. Escobedo 2021/10/05 This Document contains proprietary information and such information is prohibited from disclosure to others, publication or duplication in whole or in part without written permission from Amphenol Fiber Systems International. Copyright © 2021 Amphenol Fiber Systems International. Non published work. All rights reserved. 2 SIZE CAGE CODE A 0YPM2 DWG NO REV A2-1AAAB-XXXYPZ SCALE: NONE SHEET 1 1 OF 3 4 3 2 1 D D C C 4 0 OS1, OM1, OM4 6 D * BLANK* NO REEL 1 T OS1, OM1, OM4 5 ARES-XXXX-T2 ARES REEL, TAN, NO HANDLE ARES REEL, BLACK, NO HANDLE OM4 WTJO-0400 CABLE, 4 FIBER DISTRIBUTION, 50/125, OM4 , 5.5mm OD OM4 WTJO-0200 CABLE, 2 FIBER DISTRIBUTION, 50/125, OM4 , 5.5mm OD OM1 WTUO-0400 CABLE, 4 FIBER 62.5/125 TACTICAL DISTRIBUTION OM1 WMUO-0400 (ALT) CABLE, 4 FIBER , MILITARY,DIST. 62.5/125 OM1 WTUO-0200 CABLE, 2 FIBER 62.5/125 TACTICAL DISTRIBUTION OM1 SEE NOTE 1 & NOTE 2 A Z (REEL) OS1 4 WMUO-0200 (ALT) CABLE, 2 FIBER, MILITARY,DIST. 62.5/125 WTTO-0400 4 FIBER CABLE, 9/125 TACTICAL DISTRIBUTION WMTO-0400 (ALT) 4 FIBER CABLE, MILITARY, DIST. SM OS1 WMTO-0400-RH (ALT) 4 FIBER CABLE, MILITARY,DIST. SM RADIATION HARDENED OS1 WTTO-0200 2 FIBER CABLE, 9/125 TACTICAL DISTRIBUTION OS1 WMTO-0200 (ALT) 2 FIBER CABLE, MILITARY, DIST. SM OS1 WMTO-0200-RH (ALT) 2 FIBER CABLE, MILITARY,DIST. SM RADIATION HARDENED 4 OS1 2 4 OM1, OM4 4 8 OS1 4 8 OM1, OM4 2 2 OS1, OM1, OM4 AAA (CABLE TYPE) 3 MTFP1175 ALIGNMENT SLEEVE, TFOCA-II, SM MTFP1150 ALIGNMENT SLEEVE, SOLID (UNSPLIT) TFOCA-II MTFP1100 TFOCA-II PIN TERMINI, SM MTFP1000 TFOCA-II PIN TERMINI, MM 1 FS4H1000-2A1H1 PLUG, HERM,4 CH, ZN-NI,KEY 1 .190-.239,HERM DUST CAP,H BOOT ITEM NO. PART NO. DESCRIPTION 2 SIZE CAGE CODE A 0YPM2 DWG NO 3 2 A REV A2-1AAAB-XXXYPZ SCALE: NONE 4 B OS1 2 B=2 B=4 (FIGURE 1) (FIGURE 2) QTY/LENGTH TERMINUS, TFOCA-II DUMMY ARES REEL, OLIVE DRAB, NO HANDLE ARES-XXXX-B2 B B MTFP0000 ARES-XXXX-D2 SHEET 1 2 4 3 2 1 LENGTH (SEE NOTE 1 AND 2b) (10") 2c (10") D D P2 4 0YPM2-A2-1AAAB-XXXYPZ SN:NNNNNNNNN P1 1 A2-1AAAB-XXXYPZ: APPLICABLE PART NO. 1 2 3 6 2X 2X 2X 5 0YPM2-A2-1AAAB-XXXYPZ SN:NNNNNNNNN A2-1AAAB-XXXYPZ: APPLICABLE PART NO. P1 PINOUT DIAGRAM BLUE S1 ORANGE P1 DUMMIES S2 DUMMIES P2 C 2 3 6 2X P2 S1 P1 S2 P2 P1 PINOUT DIAGRAM BLUE S1 ORANGE P1 DUMMIES S2 DUMMIES P2 STRAIGHT PINOUT P = “S” (SEE NOTE 1) P2 P1 S1 S2 P2 C CROSS PINOUT P = “C” (SEE NOTE 1) FIGURE 1: 2 CHANNEL LENGTH (SEE NOTE 1 AND 2b) (10") 2c (10") B P2 B 4 0YPM2-A2-1AAAB-XXXYPZ SN:NNNNNNNNN P1 A2-1AAAB-XXXYPZ: APPLICABLE PART NO. 1 2 3 4X 2X A2-1AAAB-XXXYPZ: APPLICABLE PART NO. P2 S1 P1 S2 P2 P1 PINOUT DIAGRAM BLUE S1 ORANGE P1 GREEN S2 BROWN P2 STRAIGHT PINOUT P = “S” (SEE NOTE 1) CROSS PINOUT P = “C” (SEE NOTE 1) FIGURE 2: 4 CHANNEL 4 2 3 4X 2X 5 0YPM2-A2-1AAAB-XXXYPZ SN:NNNNNNNNN P1 PINOUT DIAGRAM BLUE S1 ORANGE P1 GREEN S2 BROWN P2 A 1 3 P2 P1 S1 P2 S2 A SIZE CAGE CODE A 0YPM2 DWG NO REV A2-1AAAB-XXXYPZ SCALE: NONE 2 SHEET 1 3