Data Connectors
Amphe-Dante Adapters
AMPHE-DANTE
ADAPTERS
Amphe-Dante are Dante™ audio to analogue
audio adapters, available for Input, Output, AES3
and USB applications. Featuring premium quality
Amphenol AX series XLR and RJ45 connectors in
a robust molded housing.
Amphe-Dante products enable simple connection
of analogue equipment to a Dante network and can
receive and transmit audio channels from a Dante
network and provide studio-quality, low-latency
audio via XLR connectors to and from analogue
audio equipment.
Amphe-Dante feature high-quality digital-toanalogue converters, and support a range of
sample rates and bit depths. They can provide a
hardware master clock for a Dante network. As
with other Dante products, the freely available
Dante Controller software application is used to
automatically discover and configure AmpheDante devices connected to the Dante network.
Device names, channel labels, signal routing and
other parameters (for example, sample rate and
latency) can be configured via the network using
Dante Controller. A variety of network and clock
synchronisation diagnostic tools are also available
in Dante Controller.
Amphe-Dante products use Power over Ethernet
(PoE). Power can be provided through the Ethernet
cable from a PoE-capable network switch, or from
a separate PoE injector.
Available Software Options (required)
Dante Controller
Dante Controller
Dante Controller is a free software application
that enables you to route audio and configure
devices on a Dante network. As well as automatic
device discovery, one-click signal routing and
user-editable device and channel labels, Dante
Controller provides essential device status
information and powerful real-time network
monitoring, including device-level latency and
clock stability stats, multicast bandwidth usage,
and customized event logging, enabling you to
quickly identify and resolve any potential network
issues.
Dante Via
Dante Via is powerful and easy-to-use
software that delivers unprecedented routing of
computer-based audio, allowing a wide range of
applications and devices to be networked and
interconnected, easily and inexpensively. Dante
Via network-enables locally-connected USB and
Firewire devices, and a huge range of software
applications, allowing you to route computer
-based audio across an existing Dante network,
and create standalone Dante networks without
dedicated Dante hardware.
All software can be purchased and
downloaded at
amphenolaudio.com/products/dante
Dante Virtual Soundcard
Dante Virtual Soundcard turns your computer
into a Dante-powered workstation, seamlessly
integrating your PC or Mac with Dante audio
devices on your network. You can instantly
connect to a Dante network to record, process
and playout using any audio application and any
combination of Dante-enabled devices.
Dante™ is a trademark of Audinate Pty Ltd. Audinate® is a registered trademark of Audinate Pty Ltd.
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
75
Data Connectors
Amphe-Dante Adapters
Features:
• Dante™to analogue XLR output adapters
• Line level analogue input to Dante™ audio output adapters
• Dante™AES3 2 channel input/output adapters
• Dante™USB input/output adapters
• One channel or Two channel analogue input or output
• Durable overmolded housing
• Resilient cable strain relief
• Shielded RJ45 metal connectors with integrated LED’s
• Premium AX Series XLR connectors
PRODUCT
DESCRIPTION
PART NO.
Analogue Output 1 channel,
RJ45 input to XLR output,
Durable overmolded
housing
RJD1112-0050
Analogue Output 2 channel,
RJ45 input to XLR output,
Durable overmolded
housing
RJD1212-0050
Analogue line level Input 1 channel
XLR input to RJ45 output,
Durable overmolded
housing
RJD2103-0050
Analogue line level Input 2 channel
XLR input to RJ45 output,
Durable overmolded
housing
RJD2203-0050
AES3
AES3 Input / Output 2 channel
XLR I/O to RJ45 I/O,
Durable overmolded
housing
RJD32A3-0050
USB
USB Input / Output 2 channel
USB I/O to RJ45 I/O
Durable overmolded
housing
RJD32U1-0050
ANALOGUE OUTPUT
ANALOGUE INPUT
76
DRAWING Dimensions in mm (inches)
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
Amphe-Dante Adapters
SPECIFICATIONS
ANALOG INPUT
2CH
ANALOG OUTPUT 1CH
ANALOG OUTPUT 2CH
AES3 I/O
2 IN 2 OUT
USB I/O 2 IN 2
OUT
1 XLR-F
2 XLR-F
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
1 XLR-M
2 XLR-M
1 XLR-M, 1
XLR-F
USB 2.0 Type A
Connectors
ELECTRICAL
Power Consumption
< 2 Watt
Power over Ethernet
(Required)
ANALOG /
DIGITAL AUDIO
Class 1 IEEE 802.3af POE PD compliant
Max Signal Level
(Balanced)
+24dBu / +4dBu / 0dBu
0dBV / -10dBV
+18dBu / +4dBu / 0dBu
0dBV / -10dBV
-
-
20k Ohm balanced
10k Ohm unbalanced
150 Ohm balanced
75 Ohm unbalanced
110 Ohm
balanced
-
20Hz to 20 kHz (+/-0.5db)
20Hz to 20 kHz (+/-0.5db)
-
-
> 100dB
> 100dB
-
-
> 100dB
> 100dB
> 135dB
-
< 0.01% at +4dBu
< 0.01% at +4dBu
-
-
Impedance
Frequency Response
Dynamic Range
Signal to Noise
Total Harmonic Distortion
DANTE® AUDIO
Channel Separation
N/A
Channel Matching
N/A
Asynchronous Sample
Rate Conversion
> 100 dB
N/A
< 0.25 dB
N/A
Latency from 1ms
Network Transport
Dante Audio over IP, AES67 RTP
Protection Class
IP40
Weight
≥10N - ≤35N
136g (0.299lb)
192g (0.423lb)
136g (0.299lb)
Housing
www.amphenolaudio.com
48 kHz
-5ºC to +60ºC (23ºF to +140ºF)
Insertion and Withdrawal
Force
RIGHT LED
-
100 Mbps
Network Interface
LED STATUS
Yes
24 bits
Operating Temperature
LEFT LED
< 0.25 dB
44.1 kHz, 48 kHz (default), and 96 kHz
Network Speed
MATERIALS
-
-
Bit Depth
MECHANICAL
> 100 dB
-
Sample Rate
CLIMATIC
PoE or USB
192g (0.423lb)
192g (0.423lb)
110g (0.243lb)
PVC 60P Black
FUNCTION
LEFT LED
RIGHT LED
COMMENT
Off
OFF
OFF
No Power
Device is booting
Solid GREEN
Solid RED
Slave with sync
Blinking GREEN
Solid GREEN
Normal operation
Clock Master
Blinking GREEN
Blinking GREEN
Normal operation
Any runtime error
Blinking GREEN
Blinking RED
Normal operation
Identify
Alternating RED and GREEN
Alternating RED and GREEN
Blinking for 6 seconds
(cycle every 0.5 seconds)
Failsafe (bootloader)
Blinking RED
Blinking RED
Failsafe, Corrupt Capability
(red in DC)
Upgrade (bootloader)
Blinking ORANGE
Blinking ORANGE
Device is upgrading
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
Rev 4 - 08/2018
GENERAL
ANALOG INPUT
1CH
77
Data Connectors
XLRnet
Connectors
XLRnet was designed in conjunction with
the Amphenol Data / Telecom product group
of Amphenol Canada Corp., a subsidiary of
Amphenol Corporation. Utilising our combined
expertise and knowledge of the professional
audio and high-speed data markets we are
proud to offer the XLRnet series. Featuring
Class D (10/100 BASE-T), CAT5E (1000
BASE-T) or CAT6 (10GBASE-T) ethernet
performance in A, B or D shell housings with
integrated LED’s and complete shielding options
we have your high-speed data requirements
covered.
Options
• Horizontal or Vertical PCB contacts
• Bulk Packaging
• LED colour - Red, Green, Yellow or Blue
combinations
Ordering Codes
We have listed the more common
ordering codes in each section.
Please contact us if you need any
further assistance.
Simple steps to guide you
in using this catalogue
1) Identify the product group listed in
Contents on page 1 and go directly to
that page number.
2) Each product group cover page then details
information and options available.
3) Refer to the product detail pages and identify
the product you require pictorially.
Features
4) Read the product description column for the
products standard features.
• Class D (10/100 BASE-T), CAT5E (1000
BASE-T) or CAT6 (10GBASE-T) ethernet
performance
5) Use variations column to determine
your choice.
• A, B or D type chassis housings
6) Identify part number.
• IDC or IDC 110 punch down terminals
• RJ45 feedthrough panel connectors
• Shielded or non-shielded
• LED indicators in a variety of colours.
• Compact design
7) In the event the particular option you require
is not listed please refer to the part number
breakdown page at the end of each section.
8) Please contact us directly if you have any
further problems.
• Cable plug housings
• Quick and simple installation
78
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
XLRnet Series Cable Connector
XLRNET SERIES CABLE
CONNECTOR
Features/Benefits:
• XLR RJ45 Cable plug housing.
• Designed for pre-assembled RJ45 cables.
• Quick and simple installation.
• Cost effective method for harsh environments.
• No cabling in field required.
• No tools required for installation.
• Available in Nickel or Black housings.
• Coloured boots / Backshells
Specifications: Page 80
Part Number Breakdown : Page 80
Assembly Instructions: Page 81
NOTE*RJ45 preassembled cable sold separately and is not included with the
XLRnet connector.
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
XLRnet, XLR cable plug
housing to suit preassembled RJ45 cables,
Nickel Finish
XLRnet, XLR cable plug
housing to suit
preassembled RJ45
cables, Black Finish
VARIATIONS
PART NUMBER
Standard
RJX8M
Bulk Pack
RJX8M BULK
Standard
RJX8MB
Bulk Pack
RJX8MB BULK
ISO VIEW OF RJX8M
Jaws style hinged cable clamp to
suit 5mm (0.20”) cable O.D.
Boot
Ergonomic sleeve
Zinc Diecast Shell for
robustness and wear
resistance
www.amphenolaudio.com
Jaws style hinged cable clamp to
suit 8mm (0.31”) cable O.D.
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
79
Data Connectors
XLRnet Series Cable Connector
PART NUMBER BREAKDOWN
B
IN
G
AG
PA
CK
FI
NI
SH
M
EL
L
GE
ND
ER
8
SH
CO
NT
RJX
AC
SE
RI
ES
T
LA
Y
PR
EF
IX
OU
T
S
XLRnet SERIES
BULK
E. G . RJX8MB BULK
RJX (Series Prefix), 8 contacts, M (Cable Connector), B (Black Finish),
Bulk Packaged
SERIES PREFIX
RJX
=
Series Prefix
CONTACT LAYOUT
8
=
RJ45 Cable Housing
GENDER
M
=
Male Cable Plug
SHELL FINISH
Blank
=
Nickel Plated Finish
B
=
Metal - Black Finish
Blank
=
Individual Bags
PACKAGING
BULK =
Bulk Packed
STANDARD DATA XLRnet SERIES
GENERAL
CHARACTERISTICS
Termination
Preassembled RJ45 Cable (Not supplied)
Environmental
Complies with EU RoHS 2 Directive 2011/65/EU
CLIMATIC
CHARACTERISTICS
Protection Class
IP40
Operating Temperature
-25˚C to +75˚C (-13°F to -167°F)
MECHANICAL
CHARACTERISTICS
Insertion and Withdrawal force
≥10N - ≤20N
Weight 2)
26g (0.057lb)
Cable O.D. range
5 or 8mm (0.20” or 0.31”)
Mechanical Operations
1000 mating cycles
Connector shell - Metal
Shell finish
Diecast Zinc Alloy
Satin nickel or Black
Boot / Backshell
Finish
UL94V-0 Noryl N190 / Valox
Black
Cable clamp
PA6
Sleeve
Valox
MATERIALS
2)
80
Rev 1 - 03/2013
VALUE
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
XLRnet Series Cable Connector
XLRnet
SERIES CABLE
ASSEMBLY
INSTRUCTIONS
1
“SNAP”
4
Snap or cut off release tab of the RJ45 plug.
Failure to remove the RJ45’s Release Tab will make
the XLRnet assembly permanently latching. The XLRnet
series has an independent panel side latching system.
6
2
Close clamp-boot, fasten the two tabs together
to lock.
5
Slide the nut (backshell) onto the cable.
Thread the nut (backshell) onto the shell
(torque 0.8Nm-1.2Nm) to close the connector
assembly.
3
Push clamp-boot & cable together into the shell
Install the cable clamp-boot.
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
81
Data Connectors
XLRnet Series A & B Type Chassis Receptacles
XLRNET SERIES A
& B TYPE CHASSIS
RECEPTACLES
Features:
• RJ45 Class D (10/100 BASE-T), CAT5E (1000 BASE-T) or CAT6
(10GBASE-T) Ethernet performance
• A or B type chassis housings
• Shielded or non-shielded
• LED indicators in a variety of colours.
• Horizontal or Vertical PCB
• Mates with XLRnet cable plugs or standard RJ45 plug.
Part Number Breakdown: Page 84
Specifications: Page 89
PCB Footprints: Page 88
Recommended Fastener: Page 135
PRODUCT - FIGURE
DRAWING Dimensions in mm (inches) DESCRIPTION
XLRnet chassis,
A type, Horizontal PCB
XLRnet chassis
B type, Horizontal PCB
XLRnet chassis,
B type, LEDs,
Horizontal PCB,
Bulk packed
TYPE
Class D
-
-
PART NUMBER
RJX8FA3HB
CAT5E
RJX8FA5HB
CAT6
RJX8FA6HB
Class D
-
-
RJX8FB3HB
CAT5E
RJX8FB5HB
CAT6
RJX8FB6HB
CAT5E
CAT6
XLRnet chassis,
B type, Shielded Hood,
Horizontal PCB,
Bulk packed
LED*
LHS/RHS
Class D
R
G
RJX8FB5HRGB
R
Y
RJX8FB5HRYB
R
R
RJX8FB5HRRB
G
R
RJX8FB5HGRB
G
Y
RJX8FB5HGYB
U
U
RJX8FB5HUUB
R
G
RJX8FB6HRGB
R
Y
RJX8FB6HRYB
R
R
RJX8FB6HRRB
G
R
RJX8FB6HGRB
G
Y
RJX8FB6HGYB
U
U
RJX8FB6HUUB
-
-
RJX8FB3HEB
CAT5E
RJX8FB5HEB
CAT6
RJX8FB6HEB
*Note: LED colours are denoted left to right from the panel side front view. Refer page 88
R = Red, G = Green, Y = Yellow, U = Blue
82
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
XLRnet Series A & B Type Chassis Receptacles
PRODUCT - FIGURE
DRAWING Dimensions in mm (inches) DESCRIPTION
XLRnet chassis,
B type, Shielded Hood,
LEDs, Horizontal PCB,
Bulk packed
LED*
TYPE
CAT5E
LHS/RHS
R
G
RJX8FB5HRGEB
R
Y
RJX8FB5HRYEB
R
R
RJX8FB5HRREB
G
R
RJX8FB5HGREB
G
Y
RJX8FB5HGYEB
U
U
RJX8FB5HUUEB
R
G
RJX8FB6HRGEB
R
Y
RJX8FB6HRYEB
R
R
RJX8FB6HRREB
G
R
RJX8FB6HGREB
G
Y
RJX8FB6HGYEB
U
U
RJX8FB6HUUEB
-
-
RJX8FA3VB
CAT6
XLRnet chassis, A type,
Vertical PCB
Class D
CAT5E
RJX8FA5VB
CAT6
RJX8FA6VB
XLRnet chassis, B Type, Class D
Vertical PCB
XLRnet chassis,
B type, LEDs,
Vertical PCB,
Bulk packed
-
-
RJX8FB3VB
CAT5E
RJX8FB5VB
CAT6
RJX8FB6VB
CAT5E
CAT6
XLRnet chassis,
B type,
Shielded Hood,
Vertical PCB,
Bulk packed
PART NUMBER
Class D
R
G
RJX8FB5VRGB
R
Y
RJX8FB5VRYB
R
R
RJX8FB5VRRB
G
R
RJX8FB5VGRB
G
Y
RJX8FB5VGYB
U
U
RJX8FB5VUUB
R
G
RJX8FB6VRGB
R
Y
RJX8FB6VRYB
R
R
RJX8FB6VRRB
G
R
RJX8FB6VGRB
G
Y
RJX8FB6VGYB
U
U
RJX8FB6VUUB
-
-
RJX8FB3VEB
CAT5E
RJX8FB5VEB
CAT6
RJX8FB6VEB
*Note: LED colours are denoted left to right from the panel side front view. Refer page 88
R = Red, G = Green, Y = Yellow, U = Blue
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
83
Data Connectors
XLRnet Series A & B Type Chassis Receptacles
PRODUCT - FIGURE
DRAWING Dimensions in mm (inches) DESCRIPTION
LED*
TYPE
CAT5E
XLRnet chassis,
B type, Shielded Hood,
LEDs, Vertical PCB,
Bulk packed
PART NUMBER
LHS/RHS
CAT6
R
G
RJX8FB5VRGEB
R
Y
RJX8FB5VRYEB
R
R
RJX8FB5VRREB
G
R
RJX8FB5VGREB
G
Y
RJX8FB5VGYEB
U
U
RJX8FB5VUUEB
R
G
RJX8FB6VRGEB
R
Y
RJX8FB6VRYEB
R
R
RJX8FB6VRREB
G
R
RJX8FB6VGREB
G
Y
RJX8FB6VGYEB
U
U
RJX8FB6VUUEB
*Note: LED colours are denoted left to right from the panel side front view. Refer page 88
R = Red, G = Green, Y = Yellow, U = Blue
SERIES PREFIX
RJX
=
Series Prefix
CONTACT LAYOUT
8
=
RJ45 type
GENDER
F
=
Receptacle housing
SHELL SERIES
A
B
=
=
A Type
B Type
TRANSMISSION
CLASS
3
5
6
=
=
=
Class D
CAT 5e
CAT 6
TERMINATION
H
V
=
=
Horizontal Printed Circuit Board
Vertical Printed Circuit Board
LOCKING
MECHANISM
Blank =
P
=
Latching
Push lever supplied separately for
customer installation
LED COLOUR
SEQUENCE*
Blank =
RG =
RY
=
RR
=
GR
=
GY
=
GG
=
YR
=
YY
=
YG
=
UU
=
No LEDs
Red / Green
Red / Yellow
Red / Red
Green / Red
Green / Yellow
Green / Green
Yellow / Red
Yellow / Yellow
Yellow / Green
Blue / Blue
EMI / RFI
SHIELDING HOOD
Blank
E
No shield hood
EMI / RFI shield hood
PACKAGING
Blank =
B
=
=
=
SM
L RR E
D
G
IN
AG
CK
PA
EM
I/
RF
IH
OO
S
HA
UR
EC
CO
D
LE
CK
IN
G
LO
M
IO
N
ON
5 H
LO
ES
SI
AT
RM
IN
IS
TE
SE
B
AN
F
TR
L
EL
SH
8
SM
RI
LA
T
ER
AC
ND
GE
NT
NI
AS
CL
S
UT
YO
IX
EF
PR
ES
RI
RJX
CO
E. G . RJX8FB5HLRREB
RJX (Series Prefix), 8 (Contacts), Female B type, 5 Cat5E Horizontal, Latchless,
Red - Red LEDs, EMI / RFI Hood, Bulk Packaged.
SE
XLRnet A and B Type Printed Circuit Board Connectors
S
PART NUMBER BREAKDOWN
B
(Contact factory for detailed fitting instructions)
Individual
Bulk packed
*Note: LED colours are denoted left to right from the panel side front view.
Refer Page 88
84
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
XLRnet Series D Type Chassis Receptacles
XLRNET SERIES D TYPE
CHASSIS RECEPTACLES
Features:
• RJ45 Class D (10/100 Base-T), CAT5E (1000 Base-T) or
CAT6 (10GBASE-T) Ethernet performance
• D type XLR standard housings
• IDC Punchdown block
• Thru-adaptor / Feedthrough
• Horizontal or Vertical PCB
Part Number Breakdown: Page 87
Specifications: Page 89
PCB Footprints: Page 88
Recommended Fastener: Page 135
PRODUCT - FIGURE
DRAWING Dimensions in mm (inches)
DESCRIPTION
TYPE
XLRnet chassis,
D type, Feedthrough,
Nickel Finish
CAT5E
RJX8FD5T
XLRnet chassis,
D type, IDC Terminals,
110 type, Nickel Finish
CAT5E
RJX8FD5110
CAT6
RJX8FD6110
CAT5E
RJX8FD5I
CAT6
RJX8FD6I
XLRnet chassis,
D type, IDC Terminals,
Nickel Finish
XLRnet chassis, D type, Class D
Horizontal PCB, Nickel
Finish
CAT5E
CAT6
XLRnet chassis, D type, Class D
Vertical PCB, Nickel
Finish
CAT5E
CAT6
www.amphenolaudio.com
PART NUMBER
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
RJX8FD3HB
RJX8FD5HB
RJX8FD6HB
RJX8FD3VB
RJX8FD5VB
RJX8FD6VB
85
Data Connectors
XLRnet Series D Type Chassis Receptacles
PRODUCT - FIGURE
DRAWING Dimensions in mm (inches)
DESCRIPTION
TYPE
XLRnet chassis,
D type (IP54),
Feedthrough,
Nickel Finish
CAT5E
RJXS8FD5T
XLRnet chassis,
D type (IP54),
IDC Terminals,
110 type,
Nickel Finish
CAT5E
RJXS8FD5110
CAT6
RJXS8FD6110
XLRnet chassis,
D type (IP54),
IDC Terminals,
Nickel Finish
CAT5E
RJXS8FD5I
CAT6
RJXS8FD6I
XLRnet chassis,
D type (IP54),
Horizontal PCB,
Nickel Finish
Class D
RJXS8FD3HB
CAT5E
RJXS8FD5HB
CAT6
RJXS8FD6HB
Class D
RJXS8FD3VB
CAT5E
RJXS8FD5VB
CAT6
RJXS8FD6VB
XLRnet chassis with
Protective cap,
D type (IP54),
Feedthrough,
Nickel Finish
CAT5E
RJXS8FG5T
XLRnet chassis with
Protective cap,
D type (IP54),
IDC Terminals,
110 type,
Nickel Finish
CAT5E
RJXS8FG5110
CAT6
RJXS8FG6110
XLRnet chassis with
Protective cap,
D type (IP54),
IDC Terminals,
Nickel Finish
CAT5E
RJXS8FG5I
CAT6
RJXS8FG6I
XLRnet chassis with
Protective cap,
D type (IP54),
Horizontal PCB,
Nickel Finish
Class D
RJXS8FG3HB
CAT5E
RJXS8FG5HB
CAT6
RJXS8FG6HB
XLRnet chassis with
Protective cap,
D type (IP54),
Vertical PCB,
Nickel Finish
Class D
RJXS8FG3VB
CAT5E
RJXS8FG5VB
CAT6
RJXS8FG6VB
XLRnet chassis,
D type (IP54),
Vertical PCB,
Nickel Finish
86
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
PART NUMBER
www.amphenolaudio.com
Data Connectors
E. G . RJX8FD3TB
RJX (Series Prefix), 8 (Contacts), Female D type, 3 Class D Thru Adaptor, Bulk Packaged
SERIES PREFIX
RJX
=
Series Prefix
CONTACT LAYOUT
8
=
RJ45 type
GENDER
F
=
Receptacle housing
SHELL SERIES
D
=
D Type
TRANSMISSION
CLASS
3
5
6
=
=
=
Class D
CAT 5e
CAT 6
TERMINATION
H
I
110
T
V
=
=
=
=
=
Horizontal Printed Circuit Board
IDC Punch Down Block
IDC 110 Punch Down Block
Thru adaptor / Feedthrough
Vertical Printed Circuit Board
LOCKING
MECHANISM
Blank =
P
=
Latching
Push lever supplied separately for
customer installation
Blank =
B
=
Individual
Bulk packed
PACKAGING
RJX
AC
T
GE
LA
ND
YO
ER
UT
S
SH
EL
L
SE
TR
RI
E
AN
SM S
IS
TE
RM SIO
N
IN
CL
LO ATI
ON ASS
CK
IN
G
M
PA
EC
CK
HA
AG
NI
IN
SM
G
CO
NT
XLRnet D TYPE Chassis Connectors
SE
RI
ES
PART NUMBER BREAKDOWN
PR
EF
IX
XLRnet Series D Type Chassis Receptacles
8
F
D 3
T
B
(Contact factory for detailed fitting instructions)
*Note: LED colours are denoted left to right from the panel side front view. Refer Page 88
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
87
Data Connectors
XLRNET A, B AND D TYPE SERIES
* Applicable to 3 (Class D), 5 (CAT5E) and 6 (CAT6), where available
RJX8FA*H
RJX8FA*HB
RJX8FB*HRGB
RJX8FB*HRYB
RJX8FB*HRRB
RJX8FB*HGRB
RJX8FB*HGYB
RJX8FB*HGGB
RJX8FB*HEB
RJX8FB*HRGEB
RJX8FB*HRYEB
RJX8FB*HRREB
RJX8FB*HGREB
RJX8FB*HGYEB
RJX8FB*HGGEB
RJX8FA*VB
RJX8FB*VB
RJX8FB*VRGB
RJX8FB*VRYB
RJX8FB*VRRB
RJX8FB*VGRB
RJX8FB*VGYB
RJX8FB*VUUB
RJX8FB*VEB
RJX8FB*VRGEB
RJX8FB*VRYEB
RJX8FB*VRREB
RJX8FB*VGREB
RJX8FB*VGYEB
RJX8FB*VUUEB
RJX8FD*HB
(Front
Mounting)
RJX8FD*HB
(Rear
Mounting)
RJX8FD*VB
LED
Arrangement
(Front view)
PANEL CUTOUT
A and B type
with LED’s
XLRnet
MOUNTING
PITCH /
A and B Type
D Type
A and B Type
88
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
STANDARD DATA XLRnet CHASSIS RECEPTACLES
VALUE
Class D
CAT5E
Number of contacts
Contact Arrangement
Termination
RJ45
Printed Circuit Board (PCB) - through hole, Feedthrough, IDC Terminal
Flammability
UL94V-0
Environmental
Complies with EU RoHS 2 Directive 2011/65/EU
Solderability
ELECTRICAL
CHARACTERISTICS
MIL-STD 202, Method 208
Rated current per contact
1.5 A
Rated Voltage
125V AC
Typical Contact Resistance
20mΩ
Insulation Resistance
> 500MΩ
Dielectric Strength
1000 VAC, 60 secs
Max. Frequency
Ethernet Standard
Transmission Spec.
100Mhz
100MHz
250MHz
10/100 BASE-T
1000 BASE-T
10GBASE-T
EIA/ TIA568-C.2, ISO/IEC 11801, EN50173
PoE+
802.3at Type 2
LED Type
Round, single pole, indicator
CLIMATIC
CHARACTERISTICS
Protection Class
MECHANICAL
CHARACTERISTICS
Weight** - A & B Housing
- Shielded Housing
- D Shell
IP40 (with EMI/RFI shield)
Operating Temperature
-40°C to +80°C (-40ºF to +176ºF)
11g (0.024lb)
17g (0.037lb)
25g (0.055lb)
Mechanical Operations
1000
Insertion and Withdrawal Force
≤ 21N
Latch
Spring Steel
Panel Thickness max.
3mm
Mounting screw torque max.
0.35Nm
Fastener
MATERIALS
CAT6
8
Self-Tapping screw M2.5
Connector Shell / Housing
Thermoplastic, DSM Stanyl UL94V-0, 30% GF / PA66 30% GF
Flange (A type)
Thermoplastic, DSM Stanyl UL94V-0, 30% GF
Flange (B type)
Diescast Zinc Alloy 3
Flange Finish (B type)
Contact
Satin Nickel
Phosphor Bronze
Contact Finish - Ground
- RJ45
Metal Hood Shield EMI/RFI
Latch lock and Spring
0.38μm Au over 1.27μm Ni
1.27μm Au over 1.27μm Ni
Brass, nickel plated
Rev 4 - 11/2021
GENERAL
CHARACTERISTICS
Spring steel
**Approximate weight in grams not including packaging. Please contact us for exact weight for shipping purposes.
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
89
Data Connectors
USB/HDMI Series
USB/HDMI SERIES
Features:
• Data connectors
• Feedthrough adaptors
• USB 3 Type A
• HDMI receptacles
Options: Nickel or Black Shell Finish
PRODUCT - FIGURE
DRAWING
Dimensions in mm (inches)
DESCRIPTION
VARIATIONS
PART NUMBER
USB 3.0, Feedthrough
adapter, D Flange,
Nickel Finish
Type A / Type A
AC-USB3-AA
USB 3.0, Feedthrough
adapter, D Flange,
Black Finish
Type A / Type A
AC-USB3-AAB
HDMI, Feedthrough
adapter, D Flange,
Nickel Finish
HDMI / HDMI
AC-HDMI-RR
HDMI, Feedthrough
adapter, D Flange,
Black Finish
HDMI / HDMI
AC-HDMI-RRB
PANEL CUTOUT
DIMENSIONS
FRONT VIEW
AC-****
90
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
www.amphenolaudio.com
Data Connectors
USB/HDMI Series
USB/HDMI TECHNICAL DATA
VALUE
Type
USB 3.0
Termination
Max. Wire Gauge - Stranded Wire
Flammability rating of insulating plastics
Solderability, complies with
Environmental
ELECTRICAL
CHARACTERISTICS
AWG 14 - 2.5mm²
UL94V-0
IEC 68-2-20
Complies with EU RoHS 2 Directive 2011/65/EU
Current Carrying Capacity
10A (Depends on Mating Connector)
Typical Contact Resistance
≤10mΩ (Depends on Mating Connector)
Insulation resistance (initial)
After Damp Heat Test
>2GΩ
≥ 10³ Meg Ω
Dielectric Strength
1500 V dc
CLIMATIC
CHARACTERISTICS
Protection Class
MECHANICAL
CHARACTERISTICS
Insertion and Withdrawal Force
IP40
Operating Temperature
Cable O.D.
-25ºC to +75ºC (-13ºF to +167ºF)
≥10N - ≤30N (depends on mating connector)
3mm to 7mm (0.118” to 0.275”)
Mechanical Operations
Weight
- Cable Mount
- Panel Mount
MATERIALS
HDMI 2.0
Thru-adaptor
1000 mating cycles
18g (0.039lb)
30g (0.066lb)
Connector Shell Material (Plugs)
Connector Shell Finish
Diecast Zinc Alloy EZDA No.3
Satin Nickel or Coloured Polyester
Insulators
Cable Bushing
PA66
Thermoplastic Polyurethane
Contacts
Brass Alloy
Plating
Gold Flash
Rev 2 - 03/2021
GENERAL
CHARACTERISTICS
1)
Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes.
www.amphenolaudio.com
ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd +61 3 8796 8888
91