AC3FAV2-AU-PRE

1 LEGEND 2 3 5 4 6 7 8 REVISION HISTORY DESCRIPTION DATE 26/09/14 FIRST ISSUE KEY PRODUCT CHARACTERRISTICS REV 0 A 12.9 [.506] BY MH CHG/No --- 19.8 [.779] 12.5 [.492] 2~2.4 THRU 2.4 [.094] 6.5 [.256] 27.7 [1.091] A 9.9 [.390] 19.8 [.779] 9.9 [.390] 13.8 [.543] 12.5 [.492] B 3.5 [.138] TYP 25.4 [.998] 29.4 [1.156] 2.6 [.102] B 24.0 [.945] C C 22.00 [.866] 2~ 3.20 [.126] 3.81 [.150] 3.81 [.150] PIN 3 3~ 1.60 [.063] TYP PIN 1 CHASSIS MATING SHELL ISO VIEW D 2 9.90 [.390] 19.80 [.780] PIN 2 D 1 1.2 [.047] 3 4.45 [.175] G 8.25 [.325] 5.71 [.225] 9.90 [.390] E 19.80 [.780] 23.0 [.906] SCHEMATIC CHART COMPONENT SIDE TOLERANCE: 0.05mm [.002"] PANEL CUT OUT REAR VIEW UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE F LINEAR ANGULAR X X 1 0.5 X.X' 30' X.X 0.2 X.X'X " 15' X.XX 0.1 BREAK ALL SHARP EDGES AND REMOVE ALL BURRS MIN MOUNTING PITCH SCALE 1:1 DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER MATERIAL: REFER TO COMPONENT FINISH: REFER TO COMPONENT DIMENSIONS IN MILIMETRES 1 2 3 4 5 E PCB-LAYOUT THIRD ANGLE PROJECTION 6 DRN: MH DATE: 26/09/14 CKD: M.H DATE: 26/09/14 APP'D: P.M DATE: 26/09/14 SCALE: 2:1 SIZE: A3 Amphenol Amphenol Australia Pty.Ltd, 22 Industry Blvd, Carrum Downs, VIC 3201 TITLE: PART No: AC3FAV2-AU-PRE A-TYPE VERTICAL CUSTOMER DRAWING CAD FILE: 7 55011055000220 AC3FAV2-AU-PRE DRAWING NO. SHEET 55011055-000-2 2/2 8 F