AC3FBHL3-AU-B

5 4 19.50 [.768] 12.5 [.49] 1 12.8 [.50] 20 23.0 [.91] i pl 25.3 [1.00] U 1 1 / 6 5/ E E 1.5 [.057] 12.5 [.492] E 3.5 [.14] 19.80 [.780]  21.80 [.858] D F HS t o R an Co m 19.80 [.780] ol Aus en a li a 2.70 [.106] 2 tr F 3 Amp h 6 MIN MOUNTING PITCH (1:1) D 8.89 [.350] 3.81 [.150]  1.60 [.063] 4 HOLES 3.81 [.150] PIN 2 2 9.90 [.390] 3 1+G  1.20 [.047] 01 HOLES 3.81 [.150] B PIN 3  2.7 [.11] 2 HOLES 9.90 [.390] 12.70 [.500] SCHEMATIC CHART B PANEL CUT OUT REAR VIEW 4.45 [.175] UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE PCB LAYOUT LAYOUT TOLERANCE : 0.05 [.002 in] NOTE: DIMENSIONS IN PARENTHESES ARE IN INCHES. NOTE: SUFFIX "B" IN THE PART No. INDICATES BULK PACK. 6 5 C CHASSIS  22.0 [.866] 0.64 [.025] A 3D VIEW (1:1) PIN 1 19.80 [.780] C 19.80 [.780] ANGULAR LINEAR X ±1 X ± X,X ± X.X' ± 30' X.X'X " ± 15' X,XX ± BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER CAD FILE: DRN: T.N DATE: 17/04/07 CKD: P.M DATE: 07/04/09 FINISH: REFER TO COMPONENTS APP'D: P.M DATE: 07/04/09 SCALE: 3:2 PART No: DIMENSIONS IN MILIMETRES 4 55010492000221 MATL: REFER TO COMPONENTS THIRD ANGLE PROJECTION 3 28/07/15 2 ADD SUFFIX B TO PART No. 2/4/2009 1 UPDATE FEMALE SHELL 18/09/07 0 FIRST ISSUE REV DESCRIPTION DATE REVISION HISTORY TITLE: XLR FEMALE B TYPE CONNECTOR CUSTOMER DWG AC3FBHL3-AU-B 2 SIZE: T.N A.O T.N BY 9318 8793 8686 CHG NO Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, Vic3173 DRAWING NO. SHEET A4 55010492-000-2 2/2 1 A