AC3FBV2-AU-B

5 4 3 2 1 19.80 [.780] 2.70 [.106] 12.5 [.49] 24.0 [.945] Co m 34 [1.339] 20 12.8 [.50] 4.50 [.177] 23.0 [.906] 3.5 [.138] p U 1 1 / 6 5/ E 25.3 [.996] 29 [1.146] E  21.80 [.858] 19.80 [.780] E HS t F o R lian ali a F ol Aus en tr Amp h 6 D 1.5 [.057] PIN 3 19.80 [.780] 3.81 [.150] 3.81 [.150] 3D VIEW ( 1 : 1 ) 9.90 [.390]  1.20 3 5.71 [.225] G GROUNDED  22.0 [.866] REAR VIEW NOTE: DIMENSIONS IN PARENTHESES ARE IN INCHES. NOTE: SUFFIX "B" IN THE PART No. INDICATES BULK PACK. UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE ANGULAR LINEAR X ±1 X ± X,X ± X.X' ± 30' X.X'X " ± 15' X,XX ± BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER CAD FILE: 5 4 55010463000221 DRN: T.N DATE: 17/04/07 MATL: REFER TO COMPONENTS CKD: P.M DATE: 07/04/09 FINISH: REFER TO COMPONENTS APP'D: P.M DATE: 07/04/09 SCALE: 3:2 PART No: DIMENSIONS IN MILIMETRES 6 MATING SHELL B SCHEMATIC CHART PANEL CUT OUT LAYOUT TOLERANCE : 0.05 [.002 in] C CHASSIS 8.25 [.325] PCB LAYOUT A PIN 2 PIN 1 1 2 4.45 [.175] 9.90 [.390]  1.60 3 HOLES C B  2.7 [.106] 2 HOLES 19.80 [.780] D 12.5 [.492] MIN MOUNTING PITCH THIRD ANGLE PROJECTION 3 27/08/15 2 ADD SUFFIX B TO PART No 18/12/08 1 CHANGE PUSH LEVER & LATCH SPRING 18/04/07 0 FIRST ISSUE REV DESCRIPTION DATE REVISION HISTORY TITLE: XLR FEMALE B TYPE CONNECTOR CUSTOMER DWG AC3FBV2-AU-B 2 SIZE: T.N 9318 A.O 8793 T.N 8686 BY CHG NO Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, Vic3173 DRAWING NO. SHEET A4 55010463-000-2 2/2 1 A