AC3MAH1-AU-PRE

1 LEGEND 2 3 5 4 6 7 8 REVISION HISTORY REV DESCRIPTION DATE 28/07/14 0 FIRST ISSUE 1 UPDATED DIMENSION TO ACTUAL PART 14/08/15 KEY PRODUCT CHARACTERRISTICS BY MH MH CHG/No ------ A A 2.7 [.106] 25.4 [1.000] 12.5 [.492] 9.9 [.390] B 19.8 [.780] 21.8 [.858] 25.4 [1.000] B 3.8 [.150] 3.5 [.138] 4.06 [.160] 4.06 [.160] C 10 [.390] 8.9 [.350] 19.8 [.780] 17.8 [.701] C 3.2 [.126] PIN 1 CHASSIS 17.78 [.700] 19.8 [.780] PIN 2 D 9.9 [.390] 22 [.866] PIN 3 3.81 [.150] 8.89 [.350] 3.81 [.150] 3.81 [.150] 22.2 [.874] D 2~ 1.60 [.063] 2 3 1 MATING SHELL 2~ 1.60 [.063] 1.20 [.047] SCALE 1:1 9.9 [.390] 19.8 [.780] E MIN 23 COMPONENT SIDE TOLERANCE: 0.05mm [.002"] PANEL CUT OUT REAR VIEW UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE F LINEAR ANGULAR X X 1 0.5 X.X' 30' X.X 0.1 X.X'X " 15' X.XX 0.05 BREAK ALL SHARP EDGES AND REMOVE ALL BURRS MIN MOUNTING PITCH SCALE 1:1 DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER MATERIAL: REFER TO COMPONENT FINISH: REFER TO COMPONENT DIMENSIONS IN MILIMETRES 1 2 3 E PCB-LAYOUT SCHEMATIC CHART 4 5 THIRD ANGLE PROJECTION 6 DRN: A.O DATE: 28/07/14 CKD: M.H DATE: 14/08/15 APP'D: P.M DATE: 14/08/15 SCALE: 2:1 SIZE: A3 Amphenol Amphenol Australia Pty.Ltd, 22 Industry Blvd, Carrum Downs, VIC 3201 TITLE: PART No: AC3MAH1-AU-PRE HORIZONTAL MALE CUSTOMER DRAWING CAD FILE: 7 55011023000211 AC3MAH1-AU-PRE DRAWING NO. SHEET 55011023-000-2 2/2 8 F