AC3MBV1-AU-B

5 4 3 2 1 19.80 [.780] Amp h 4.50 [.177] 2.70 [.106] 12.5 [.492] 12.8 [.504] F U 1 1 / 6 5/ E E 12.5 [.492] 19.80 [.780] 12.5 [.492] i pl 12.8 [.504]  21.50 [.846] E 20 23.0 [.906] 3.5 [.138] HS Ro ant a li a 26.7 [1.051] ol Aus en tr F Co m 6 D 1.5 [.059] MIN MOUNTING PITCH (1:1) D 19.80 [.780] 3.81 [.150] PIN 3  2.70 [.106] 2 HOLES 9.90 [.390] PIN 2 2 3  1.60 [.063] 3 HOLES PANEL CUT OUT REAR VIEW B PCB LAYOUT PIN 1 19.80 [.780] 1+G 9.90 [.390] 3.81 [.150] C 3.81 [.150] CHASSIS MATING SHELL  22.00 + 0.20 - 0.00 SCHEMATIC CHART NOTES: DIMENSIONS IN PARENTHESES ARE IN INCHES. A NOTE: SUFFIX "B" IN THE PART No. INDICATES BULK PACK ANGULAR LINEAR X ±1 X ± 0.5 X,X ± 0.1 X.X' ± 30' X.X'X " ± 15' X,XX ± 0.05 BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER CAD FILE: 55010483000211 DRN: T.N DATE: 04/09/07 MATL: REFER TO COMPONENTS CKD: P.N DATE: 06/26/09 FINISH: REFER TO COMPONENTS APP'D: P.M DATE: 06/26/09 SCALE: 1.5:1 DIMENSIONS IN MILIMETRES 6 5 4 THIRD ANGLE PROJECTION 3 PART No: B ADD SUFFIX B TO PART No. ADD SCHEMATIC CHART 2 1 TOLERANCE: 0.05 [ .002] UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE C 3D VIEW ( 1 : 1 ) 0 FIRST ISSUE REV DESCRIPTION REVISION HISTORY TITLE: XLR MALE B TYPE CONNECTOR CUSTOMER DWG AC3MBV1-AU-B 2 SIZE: 27/08/15 T.N 9318 06/26/09 A.O 8793 03/09/07 T.N 8686 DATE BY CHG No Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, Vic3173 DRAWING NO. SHEET A4 55010483-000-2 2/2 1 A