ACJS-MV35-5

1 2 6 7 REV 0 a li a 15.8 24.0 METAL WASHER 13x0.40mm THICK M6x0.5 MMETAL NUT 2.0MM THICK 4.0 A C 10.0 13.0 /E 0 2 / 95 15.8 EU Co m BY CHG/No M.H 8798 31.4 HS Ro ant i pl 8 REVISION HISTORY DESCRIPTION DATE 30/10/08 FIRST ISSUE KEY PRODUCT CHARACTERRISTICS ol Au s en 20 5 4 tr A Amp h LEGEND 3 B B 2.0 0.40 6.38 6.38 0.56 4 0.56 5 C 6.38 2.50 C 6.0 4.67 6.38 3 1 2 3~ 2.0 D 2~ 1.4 2.40 D 4.67 PANEL CUTOUT PCB LAYOUT (CONNECTOR SIDE) PART NUMBER ACJM-MV35-2 ACJS-MV35-3 ACJM-MV35-2S ACJS-MV35-3S 4 4 E ACJS-MV35-5 4 E 5 2 SCHEMATIC F 3 3 3 3 1 1 1 1 1 NOTE: This connector is suitable for maximum 1.15mm panel thickness with Metal Washer & Nut LINEAR ANGULAR X X 1 0.5 X.X' 30' X.X 0.1 X.X'X " 15' X.XX 0.05 BREAK ALL SHARP EDGES AND REMOVE ALL BURRS DO NOT SCALE THIS DOCUMENT IS THE PROPERTY OF AMPHENOL AUSTRALIA PTY. LTD. . NO PART THEREOF MAY BE REPRODUCED AND USED WITHOUT THE PRIOR WRITTEN CONSENT OF THE OWNER MATERIAL: REFER TO COMPONENTS FINISH: DIMENSIONS IN MILIMETRES 2 3 2 3 UNLESS OTHERWISE SPECIFIED TOLERANCE TO BE 1 2 4 5 DRN: B.Z DATE: 25/04/08 CKD: M.H DATE: 29/10/08 P.M DATE: 29/10/08 REFER TO COMPONENTS APP'D: THIRD ANGLE PROJECTION 6 SCALE: 3:1 SIZE: A3 Amphenol Amphenol Australia Pty.Ltd, 2 Fiveways Blvd, Keysborough, VIC 3173 TITLE: PART No: 3.5mm JACK VERTICAL CUSTOMER DRAWING CAD FILE: 7 55010544001110 SEE CHART DRAWING NO. SHEET 55010544-001-5 1/1 8 F