ACPS-KN

1/4” PHONE PLUGS MUSICIAN / OEM RANGE 1/4” PLUGS TECHNICAL DATA VALUE 2 Pole (Mono) 3 Pole Tip Ring Sleeve (Stereo) Termination Max. Wire Gauge - Stranded Wire Solder 2 Pole (Mono): AWG 16˜1.5mm2 3 Pole (Stereo): AWG 18˜1mm2 Flammability rating of insulating plastics Solderability, complies with ELECTRICAL CHARACTERISTICS IEC 68-2-20 Environmental Complies with EU RoHS 2 Directive 2011/65/EU Current Carrying Capacity 10A (Depends on Mating Connector and Cable) Typical Contact Resistance Depends on Mating Connector Insulation resistance (initial) After Damp Heat Test >2GΩ ≥1GΩ Dielectric Withstand Voltage 2 Pole : 1.5 kV dc 3 Pole : 1 kV dc CLIMATIC CHARACTERISTICS Protection Class MECHANICAL CHARACTERISTICS Insertion and Withdrawal Force Operating Temperature Mating Cycles Cable O.D. - M Series - M Series II MATERIALS UL94V-0 IP40 -25ºC to +70ºC (-13ºF to 158ºF) ≥10N - ≤30N Min. of 1000 cycles without any physical damage 3mm to 6.5mm (0.118” to 0.256”) 6.5mm to 8mm (0.256” to 0.315”) Connector Shell Material Diecast Zinc Alloy EZDA No.3 Connector Shell Finish Satin Nickel or Black Polyester Insulators UL94 V-0 PBT Resin or Modified PPE Resin and fibreglass laminate Cable Bushing Santoprene Contact Plating Brass / Ni over Cu (Copper) Rev 4 - 05/2014 GENERAL CHARACTERISTICS Number of Contacts 1) Approximate weight only, does not include packaging. Please contact us for exact weight for shipping purposes. 109 ENTERTAINMENT INTERCONNECT CATALOGUE - Amphenol Australia Pty Ltd Telephone 61 3 8796 8888 Fax 61 3 8796 8801 www.amphenolaudio.com