AHD10-9-1939P80

REVISIONS REV ECO DESCRIPTION A2 APPR C0754S UPDATE DRAWING 01NOV17 JONY TOMMY A4 -- UPDATE DRAWING 06/JAN/20 ROOKIE TOMMY 6 1 3/8-18 UNEF-2A THREAD 8X Y Y M MD D RECEPTACLE,J1939 TYPE 2,9 POS,SQUARE FLANGE,AHD 28.6 TITLE: A m p h e n ol 36.6 0 - 9 -1 9 3 9P 3.2 BY DRP A3 D1 ALIGNMENT ARROW ( 3 ) PLACES DATE 04DEC13 AH 36.6 RELEASE NEW DWG FORMAT I 28.6 42±0.5 ALIGNMENT RIB DWG NO: 28.6 AHD10-9-1939P8X Ø3.18 NOTES: UNLESS OTHERWISE SPECIFIED Ø35.38 28.6 REV: 1. MATERIAL: HOUSING: THERMOPLASTIC; COLOR: GREEN SEAL: SILICONE RUBBER A4 1 QUANTITY UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 6 CONTACT SIZE AND WIRE SEAL RANGE: PART NUMBER SEAL TYPE 4. MATING PART: AHD16-9-1939S8* ( * = AVAILABLE MODIFICATIONS ) AHD10-9-1939P80 STANDARD 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. AHD10-9-1939P8R REDUCED CONTACT SIZE MIN. INSUL O.D. MAX. INSUL O.D. TYPICAL WIRE RANGE 16 2.54 mm (.100 in) 3.81 mm (.150 in) 14 - 20 AWG 16 1.35 mm (.053 in) SEE NOTE 6 DESCRIPTION PART NUMBER MATERIALS LIST 3.05 mm (.120 in) 3) Note reference = X SIGNATURES DRAWN: CHECKED: 07/JAN/20 07/JAN/20 TOMMY 07/JAN/20 Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: Amphenol DATE ROOKIE ORION RECEPTACLE, J1939 TYPE 2, 9 POSITION, SQUARE FLANGE, AHD SERIES THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE B C- 14 - 20 AWG NEXT ASS'Y: ITEM NONE DWG NO: REVISION AHD10-9-1939P8X SHEET 1 A4 OF 1 1 MOUNTING HOLE DETAIL OF: 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C. 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.4 INSULATION RESISTANCE: 1000 MEGOHM MIN @ 25°C. 3.5 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ). 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT SH: 2. MODIFICATIONS: J1939 TYPE 2 KEY ARRANGEMENT; OPTIONAL REDUCED DIA. WIRE SEAL ( SEE NOTE 6 ) AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed Part Number Description AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 A114017 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plug, Size 16, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021