AHDM04-24-09PR-059

REVISIONS 26.0 96.8 REV ECO A1 -- DESCRIPTION RELEASED DATE BY APPR 16MAR2020 J. HEAD DH Ø18.8 LARGE BUSHING Ø39.7 TITLE: BUSHING 2X LATCH SEGMENT KIT,RECPT AND BACKSHELL,SZ 24 BACKSHELL 2X SCREW AND LOCK WASHER 2X RECOMMENDED TORQUE : 1.5-2.0 NM NOTES: UNLESS OTHERWISE SPECIFIED 1. RECEPTACLE MATERIAL: SHELL: ZINC ALLOY, NICKEL PLATED INSERT AND RETAINING RING: THERMOPLASTIC SEAL: SILICONE RUBBER ASSEMBLED SH: 1 HD34-24-09PE-059 AHDM04-24-09PR-059 DESCRIPTION PART NUMBER MATERIALS LIST UNLESS OTHERWISE SPECIFIED 1) All dimensions are in metric(mm). 2) Tolerances are as follows: 1 PL DEC ±0.30 Fractions ±1/64 2 PL DEC ±0.15 Angles ±1° 3 PL DEC ±0.08 3) Note reference = X SIGNATURES DRAWN: J. HEAD Amphenol DATE 16MAR2020 CHECKED: Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: 6. SEE SPECIFIC RECEPTACLE DRAWING FOR: 6.1 CONTACT SIZE AND WIRE RANGE. 6.2 RETAINING RING COLOR. 6.3 MATING PART(S). 6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS. MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: ITEM DURAMATE AHDM RECEPT, SIZE 24, WD THD, KIT W/ CABLE CLAMP BACKSHELL THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SIZE SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: REVISION B C- AHDM04-24-09PR-059 A1 NEXT ASS'Y: NONE SHEET 1 OF 1 1 QUANTITY OF: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. A1 4. APPLY TO CABLE OD SIZE: Ø11.20-Ø24.08 . CAN BE USED: 4.1. WITH LARGE AND SMALL BUSHINGS IN PLACE. 4.2. WITH ONLY LARGE BUSHING IN PLACE. 4.3. WITH BOTH BUSHINGS REMOVED. BACKSHELL AHDMBS-24-059 REV: 3. SPECIFICATIONS: 3.1 OPERATING TEMPERATURE: -55℃ TO +125℃. 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN @ 25℃. 3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION). 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 RoHS COMPLIANT SMALL BUSHING RECEPTACLE AHDM04-24-09PR AHDM04-24-09PR-059 2. BACKSHELL MATERIAL: SHELL: ALUMINIUM ALLOY, NICKEL PLATED; LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED; SCREW AND LOCK WASHER: STAINLESS STEEL; BUSHING: EPDM. DWG NO: KIT A Series™ - Contact Size 4 Options (Works with: ATHD and DuraMate Series) Machined Contacts, Pins and Sockets Part Number Description Size AWG Type Amps AT60-203-04141-4 Male Contact - Pin, Copper Alloy, Nickel-Plated 4 4 Machined 100A AT60-204-0490 Male Contact - Pin, Copper Alloy, Nickel-Plated 4 6 Machined 100A AT62-203-04141-4 Female Contact - Socket, Copper Alloy, Nickel-Plated 4 4 Machined 100A AT62-203-04141 Female Contact - Socket, Copper Alloy, Nickel-Plated 4 6 Machined 100A Tooling - Machined Contacts Part Number WA23 WA23-138DA Description Heavy Duty Pneumatic Crimp Tool -Uses Universal Positioner Part No. WA23-101DA and Crimp Locator MFX-3961 Die Assembly -for Heavy Duty Pneumatic Crimp Tool, Size 4 WA23-11 Contact Locator, Size 4 96-978-22 Crimper and Dies -for Size 10mm²-185mm² Wires AT11-027-0405 Contact Removal Tool, Plastic, Size 4, 4AWG Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 08/2023 A Series™ - Contact Size 8 Options (Works with: ATHD and DuraMate Series) Machined Contacts, Pins and Sockets Part Number Description Size AWG Type Amps AT60-204-08141 Male Contact - Pin, Copper Alloy, Nickel-Plated 8 8-10 Machined 60A AT62-203-08141 Female Contact - Socket, Copper Alloy, Nickel-Plated 8 8-10 Machined 60A AT60-204-08141-16 Male Contact - Pin, Copper Alloy, Nickel-Plated 8 6 Machined 60A AT62-203-08141-16 Female Contact - Socket, Copper Alloy, Nickel-Plated 8 6 Machined 60A Tooling - Machined Contacts Part Number WA23 Description Heavy Duty Pneumatic Crimp Tool -Uses Universal Positioner Part No. WA23-101DA and Crimp Locator MFX-3961 WA23-2 Die Assembly -for CA-5E12 Heavy Duty Pneumatic Crimp Tool, Size 8 WA23-3 Die Assembly -for CA-5E12 Heavy Duty Pneumatic Crimp Tool, Size 6 WA23-10 Contact Locator, Size 6 and Size 8 96-978-22 Crimper and Dies -for Size 10mm²-185mm² Wires AT114008 Contact Removal Tool, Plastic, Size 8, 8-10AWG Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 08/2023 A Series™ - Contact Size 12 Options (Works with: AHD-6, ATP, ATHD, DuraMate and PanelMate Series) Machined Contacts, Sockets & Pins Part Number Description Stamped & Formed Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type *AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed *AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed Part Number Description *Works with ATP Series only DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number Description 65-54749 AT62-210-1231-1820 Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Machined Contacts Part Number Tooling - Stamped & Formed Contacts MFX-3973 Crimp Die - Size 12 MFX-3985 Crimp Die - Svize 12, 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG ATT-12-01 Hand Crimp Tool - Size 12, 10AWG Description AUTK-12 Hand Crimp Tool, Size 12 AUTK-100 Universal Heavy Duty Contact Crimping Tool Kit, Size 12/16/20 CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 M300-25A Hand Crimp Tool used with Crimp Locator MFX-3966, Size 12, 10AWG MFX-3966 Contact Locator used with Hand Crimp Tool M300-25A, Size 12, 10AWG Contact Removal Tools (For both Machined or Stamped & Formed Contacts) Part Number ATRT-100 AT11-337-1205 Description Contact and Wedgelock Extraction Tool Contact Removal Tool, Plastic, Size 12 Sealing Plugs (For both Machined or Stamped & Formed Contacts) Part Number A114017 Description Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive, Clinton Township, MI 48036 USA www.amphenol-sine.com 10/2023