AHDP02-24-31PR-BRA

www.amphenol-sine.com Dura|Mate Family ™ Environmentally-Sealed, Multi-Pin, Heavy-Duty, Plastic or Metal Circular Connectors Amphenol Sine Systems’ DuraMate™ Family of environmentally-sealed, multi-pin, heavy duty, plastic (AHDP) or metal (AHDM/AHDBM) circular connectors provide an economical, quick-connect, bayonet-locking system manufactured to withstand the challenges and complexities of harshenvironment, off-road applications. Our ISOBUS products specifically meet ISO 11783 standards (for control and communications between tractors, implements and software) for agricultural applications. Currently available in the following Series: Dura|Mate AHDP ™ Dura Mate AHDP ISOBUS 91 Series ™ Dura|Mate AHDM ™ Dura Mate AHDM/AHDBM ISOBUS 91 Series ™ DuraMate™ AHDP (Pgs 3-7): Size 18 with 8 insert arrangements 2, 6, 8, 14(x3), 20 and 21 Size 24 with 13 insert arrangements 7(x2), 9, 16, 18, 19, 21, 23, 27, 29, 31, 35 and 47 DuraMate™ AHDM (Pgs 8-11): Size 18 with 6 insert arrangements 2, 6, 8, 14, 20 and 21 Size 24 with 13 insert arrangements 7(x2), 9, 16, 18, 19, 21, 23, 27, 29, 31, 35 and 47 DuraMate™ AHDP ISOBUS 91 (Pgs 12-16): Size 24, 9 Position DuraMate™ AHDM/AHDBM ISOBUS 91 (Pgs 17-22): Size 24, 9 Position Key Features • 3 key-way bayonet design ensures proper mating of connectors • High density signal and mixed power insert configurations • Operating temperature range: -55°C to +125°C IP69K • High current configurations incorporating revolutionary RADSOK® contacts • High strength impact resistant & lightweight thermoplastic or zinc-alloy metal housings • Low insertion force stamped terminals offer improved manufacturing efficiencies • Environmentally-sealed and engineered rapid and secure mating system achieves IP68/IP69K protection (in mated condition) from ingress of dust, water, mud and other contaminants and is vibration resistent • Sealing features consisting of durable high temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels • Backshells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges • Wire entry sealing available in three separate ranges for discrete wire applications • Wide Thread Adapters (WTA) provide an enhanced threading for use with our wide variety of screw-on or clamshell backshells (AHDP Only) • Smooth Ring Adapters (SRA) are designed for use without backshells for a smaller footprint (AHDP Only) • Backshell Ring Adapters (BRA) allow for use with other compatible industry-standard snap-on backshells (AHDP Only) • Utilizes A Series™ standard contact system (Stamped & Formed or Machined) IP68 Standard products. Custom solutions Customer Service +1 800 394 7732 Updated 06/2022 www.amphenol-sine.com 1 of 22 www.amphenol-sine.com DuraMate™ AHDM/AHDP Series - Part Numbering Sequence AHD Amphenol Sine Systems Plastic Body - P Metal Body - M Plug - 06 Receptacle - 04 PanelMate™ Receptacle - 02 Shell Size - 18 or 24 No. of Positions - 06-47 X XX - XX - XX X X - XXX XXXX Modifications C030 - 6 Position/2 Used (Size 4) C041 - Receptacle w Diagnostic Keying CL20 - Plug w Diagnostic Keying CL22 - 7 Position Alt Construction Adapter Style BRA - Backshell Ring Adapter WTA - Wide Thread Adapter SRA - Smooth Ring Adapter 059 - Backshell w Cable Clamp Rear Seal Type N - Normal Diameter Insulation (Green) T - Thin Diameter Insulation (Grey) R - Reduced Diameter Insulation (Blue) Contact Type S - Socket P - Pin DuraMate™ AHDP/AHDM Series - Sample Layouts AHDP06-18-20SN-SRA Size 18, 20 Pos, Plug, Socket, DuraMate™ AHDP Series, Plastic, Normal Seal, Smooth Ring Adapter AHDP02-18-08PR-WTA Size 18, 8 Pos, Receptacle with Flange, Pin, DuraMate™ AHDP with PanelMate™, Plastic, Reduced Seal, Wide Thread Adapter AHDP04-18-06PN-BRA Size 18, 6 Position, Receptacle, Pin, DuraMate™ AHDP, Plastic, Normal Seal, Backshell Ring Adapter (BRA) (Green) AHDM04-18-08SN Size 18, 8 Pos, Receptacle, Socket, DuraMate™ AHDM Series, Metal Body, Normal Seal, Wide Thread Adapter AHDM06-24-16PR Size 18, 16 Pos, Plug, Pin, DuraMate™ AHDM Series, Metal Body, Reduced Seal, Wide Thread Adapter AHDM06-18-14SR-059 Size 18, 14 Pos, Plug, Socket, DuraMate™ AHDM Series, Metal Body, Reduced Seal, Backshell with Cable Clamp Updated 06/2022 www.amphenol-sine.com 2 of 22 www.amphenol-sine.com Dura|Mate AHDP ™ Environmentally-Sealed, Multi-Pin, Heavy-Duty, Plastic, Circular Connectors Available in Size 18 with 8 insert arrangements 2, 6, 8, 14(x3), 20 and 21 Available in Size 24 with 13 insert arrangements 7(x2), 9, 16, 18, 19, 21, 23, 27, 29, 31, 35 and 47 The DuraMate™ AHDP environmentally-sealed, multi-pin, heavy duty, plastic, circular connector series provides an economical quick-connect bayonet locking system manufactured to withstand the challenges and complexities of harsh environment off-road applications. • 3 keyway bayonet design ensures proper mating of connectors • High density signal and mixed power insert configurations • High current configurations incorporating revolutionary RADSOK® contacts • Low insertion force stamped terminals offer improved manufacturing efficiencies • Sealing features consisting of durable high temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels • Backshells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges. • Wire entry sealing available in four separate ranges for discrete wire applications • Wide Thread Adapters (WTA) provide an enhanced threading for use with our wide variety of screw-on or clamshell backshells • Smooth Ring Adapters (SRA) are designed for use without backshells for a smaller footprint • Backshell Ring Adapters (BRA) allow for use with other compatible industry-standard snap-on backshells • Utilizes A Series™ standard contact system (Stamped & Formed or Machined) IP68 IP69K DuraMate™ AHDP - Material & Performance Specifications Size 4 - 100A Size 8 - 86A Current Rating per Contact Size 12 - 25A Size 16 - 13A Size 20 - 7.5A Operating Temperature -55°C to +125°C Dielectric Withstanding Voltage Current Leakage -2mA at 1500 VAC Degree of Protection IP68/69K (in mated condition) Mating Cycle Durability 100 Cycles Housing Material Thermoplastic Insulation Insert Thermoplastic Seal Silicone Rubber Contact A Series™ Common System Compliance RoHS Standard products. Custom solutions Customer Service +1 800 394 7732 Updated 06/2022 www.amphenol-sine.com 3 of 22 www.amphenol-sine.com DuraMate™ AHDP - Insert Arrangements (1) C030 - 6 Position/2 Used (Size 4); (2) C041 - Receptacle w Diagnostic Keying; (3) CL20 - Plug w Diagnostic Keying; (4) CL22 - 7 Position Alt Construction) Size 18 Size 18 Size 18 Size 18 Size 18 Size 18 Size 18 Size 18 18-06 (1) 2 Size 4 18-06 2 Size 4, 4 Size 16 18-08 8 Size 12 18-14 14 Size 16 18-14 (2) 14 Size 16 18-14 (3) 14 Size 16 18-20 2 Size 16, 18 Size 20 18-21 21 Size 20 Normal Normal Normal Normal Normal Reduced Normal Reduced Normal Reduced Normal Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 24-07 1 Size 8 (RADSOK®) 6 Size 12 24-07 (4) 3 Size 4, 4 Size 16 24-09 1 Size 4, 2 Size 8 6 Size 12 24-16 16 Size 12 24-18 1 Size 8, 3 Size 12 14 Size 16 24-19 6 Size 12, 13 Size 16 24-21 4 Size 12, 17 Size 16 24-23 23 Size 16 24-27 4 Size 12, 23 Size 16 24-29 4 Size 12, 19 Size 16 6 Size 20 Normal Normal Reduced Normal Normal Reduced Reduced Size 24 Size 24 Size 24 24-31 31 Size 16 24-35 3 Size 16, 32 Size 20 24-47 5 Size 16, 42 Size 20 R Normal Reduced Normal Reduced Reduced Reduced Normal Reduced Contact Legend (Size/Max. Current) R 4+/100A 4/100A Reduced Thin Reduced 8/60A 8/86A RADSOK® 12/25A 16/13A 20/7.5A Reduced DuraMate™ AHDP - Recommended Wire Insulation Overall Diameter (OD) 4+ contact is only available for 24-07CL22 Contact Size Typical Wire Range Normal Seal Thin Seal 4+ 4AWG (25.0-21.0mm²) 7.9-10.67mm (0.311-0.420") - - Reduced Seal (See datasheets) - 4 6AWG (16.0-13.0mm²) 6.63-7.41mm (0.261-0.292") - 6.63-7.41mm (0.261-0.292") - 8 8-10AWG (10.0-5.0mm²) 4.83-6.10mm (0.190-0.240") - 3.43-5.59mm (0.135-0.220") - 12 10-14AWG (6.0 2.0mm²) 3.43-4.32mm (0.1350-.170") - 2.46-4.01mm (0.135-0.158") 2.46-4.01mm (0.135-0.158") 16 14-20AWG (2.0-0.5mm²) 2.54-3.40mm (0.100-0.134") 2.23-2.69mm (0.088-.106”) 1.35-3.05mm(0.053-0.120") 1.35-2.62mm (0.053-0.103") 20 16-22AWG (1.5-0.35mm²) 1.02-2.41mm (0.040-.095") - 1.02-02.41mm (0.040-0.095") 1.02-2.10mm (0.040-0.083") DuraMate™ AHDP - Backshell Options and Accessory Overview Lockwashers/Panel Nuts/ Rubber Flange Seals Protective Caps Wide Variety of Backshell Options Contact Removal Tools Updated 06/2022 Blank Seal Plugs www.amphenol-sine.com 4 of 22 www.amphenol-sine.com DuraMate™ AHDP - Plug & Receptacle Options (Dimensions in mm) Size 18 Plug Size 18 Receptacle Size 24 Plug Size 24 Receptacle Wide Thread Adapter (WTA) Wide Thread Adapter (WTA) Wide Thread Adapter (WTA) Wide Thread Adapter (WTA) 39.1mm Ø33.9mm Ø40.3mm Ø33.8mm Smooth Ring Adapter (SRA) Smooth Ring Adapter (SRA) 40.3mm Backshell Ring Adapter (BRA) 42.0mm Backshell Ring Adapter (BRA) Ø40.1mm Backshell Ring Adapter (BRA) Backshell Ring Adapter (BRA) 42.5mm 44.8mm 5.1mm 5.1mm Smooth Ring Adapter (SRA) 38.8mm Ø37.7mm 42.3mm 41.5mm Ø40.1mm Smooth Ring Adapter (SRA) 42.0mm Ø33.8mm Ø30.9mm Ø35.6mm 38.3mm 41.8mm 45.7mm 6.1mm 6.1mm Ø42.3mm Ø35.6mm Ø33.8mm Ø42.3mm Ø40.1mm DuraMate™ AHDP w PanelMate™ - Receptacle Options (Dimensions in mm) Size 18 Plug Size 18 Receptacle Size 24 Plug Size 24 Receptacle - PanelMate™ with Wide Thread Adapter (WTA) - PanelMate™ with Wide Thread Adapter (WTA) 41.8mm - - 41.5mm - Ø33.8mm PanelMate™ with Smooth Ring Adapter (SRA) - Ø40.1mm PanelMate™ with Smooth Ring Adapter (SRA) 41.9mm ±0.50 - - 41.8mm ±0.5 Ø30.9mm Ø33.8mm PanelMate™ with Backshell Ring Adapter (BRA) - - Ø40.1mm PanelMate™ with Backshell Ring Adapter (BRA) 44.8mm ±0.50 - Ø33.8mm 45.7mm ±0.50 Ø35.6mm 5.1mm Updated 06/2022 - Ø40.1mm Ø42.3mm 6.1mm www.amphenol-sine.com 5 of 22 www.amphenol-sine.com DuraMate™ AHDP - Backshell Options and Accessories Image Updated 06/2022 Part Number Description AHDPBS-015-1805 Size 18, Backshell, Conduit, Snap Over, Right Angle 90°, Duramate™ AHDP Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-18NUT Adapter AHDPBS-15L017-1805 Size 18, Backshell, Conduit, Snap-Over, Right Angle 180°, DuraMate™ AHDP Note: For use with Backshell Ring Adapter (BRA) AHDPBS-011-2405 Size 24, Backshell, Conduit, Snap Over, Right Angle 90°, DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-24NUT Adapter AHDPBS-11L017-2405 Size 24, Backshell, Conduit, Snap-Over, Right Angle 180°, DuraMate™ AHDP Note: For use with Backshell Ring Adapter (BRA) AHDPBS-016-1805 Size 18, Backshell, Conduit, Snap Over, Straight 180°, Duramate™ AHDP Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-18NUT Adapter AHDPBS-16L017-1805 Size 18, Backshell, Conduit, Snap-Over, Straight, DuraMate™ AHDP Note: For use with Backshell Ring Adapter (BRA) AHDPBS-010-2405 Size 24, Backshell, Conduit, Snap Over, Straight 180°, DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-24NUT Adapter AHDPBS-10L017-2405 Size 24, Backshell, Conduit, Snap-Over, Straight, DuraMate™ AHDP Note: For use with Backshell Ring Adapter (BRA) AHDPBS-0406-001 Size 24, Backshell, Tie Wrap, Wide Thread Adapter (WTA), DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-18-001 Size 18, Backshell, Tie Wrap, Wide Thread Adapter (WTA), Cable Diameter Range 14.5mm - 18.0mm, Duramate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-0406-002 Size 24, Backshell, Wide Thread Adapter (WTA), 2 PC, Compression Nut Cable Diameter Range 14.5mm - 18.0mm, DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-0406-003 Size 24, Backshell, Wide Thread Adapter (WTA), 2 PC, Compression Nut Cable Diameter Range 19.5mm - 24.1mm, DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-18-002 Size 18, Backshell, Wide Thread Adapter (WTA), 2PC, Compression Nut Cable Diameter Range 14.5mm-18.0mm, Duramate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-0406-SM01 Size 24, Backshell, Sealed, Cable Grommet, DuraMate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDPBS-18-SM01 Size 18, Backshell, Sealed, Cable Grommet, Duramate™ AHDP Note: For use with Wide Thread Adapter (WTA) AHDC06-24 Size 24, Receptacle Cap, Sealed, DuraMate™ AHDP AHDC06-18 Size 18, Receptacle Cap, Sealed, DuraMate™ AHDP AHDC04-24 Size 24, Plug Cap, Sealed, DuraMate™ AHDP AHDC04-18 Size 18, Plug Cap, Sealed, DuraMate™ AHDP www.amphenol-sine.com 6 of 22 www.amphenol-sine.com DuraMate™ AHDP - Backshell Options and Accessories, cont. Image Updated 06/2022 Part Number Description AHDC04-24-PM Size 24, Plug Cap, Sealed, Threaded, DuraMate™ AHDP AHDC04-24-PMT Size 24, Plug Cap, w Tether, Threaded, Lock Washer, Sealed, DuraMate™ AHDP AHDC04-24-T Size 24, Plug Cap, w Tether, Sealed, DuraMate™ AHDP AHDP24-PN01 Size 24, Panel Nut, Duramate™ AHDP AHDP18-PN01 Size 18, Panel Nut, DuraMate™ AHDP AT14-001-2486 Size 24, Lock Washer, Wave, Duramate™ AHDP AT14-002-1886 Size 18, Lock Washer, Wave, DuraMate™ AHDP AHDP-16-04477 Size 24, Rubber Flange Seal, Duramate™ AHDP AHDP-16-04978 Size 18, Rubber Flange Seal, DuraMate™ AHDP A114019 Size 4, Blank Seal Plug A114018 Size 8, Blank Seal Plug A114017 Size 12/16, Blank Seal Plug AT13-217-1605 Size 16, Locking Seal Plug AT13-204-2005 Size 20, Blank Seal Plug AT11-027-0405 Size 4+, Contact Removal Tool, 4AWG AT114009 Size 4, Contact Removal Tool, 6AWG AT11-001-3.6M Size 8, Contact Removal Tool, 7-10AWG AT114008 Size 8, Contact Removal Tool, 8-10AWG AT11-337-1205 Size 12 , Contact Removal Tool, 12-14AWG AT11-310-1605 Size 16, Contact Removal Tool, 16-20AWG AT11-240-2005 Size 20, Contact Removal Tool, 20-22AWG www.amphenol-sine.com 7 of 22 www.amphenol-sine.com Dura Mate AHDP ISOBUS 91 Series ™ Environmentally-Sealed, Multi-Pin, Heavy-Duty, Plastic Circular ISOBUS Connectors Available in Size 24, 9 Position Amphenol Sine Systems’ DuraMate™ AHDP ISOBUS 91 Series of environmentally-sealed, multi-pin, heavy duty, circular plastic (AHDP) plugs & receptacles provide an economical, quick-connect, circular bayonet locking system designed to meet ISO 11783 standards (for control and communications between tractors, implements and software) and withstand the challenges and complexities of harsh environment, off-road, agrcultural applications. Key ISOBUS 91 Series Features + One-to-one alternative for all HDP20 parts + Compatible to other industry standard circular bayonet versions + AHDP 91 Series Plugs have a jumper (bridged contacts) between Pin 4 & 5 + AHDP 91 Series Receptacles do not have a jumper (bridged contact) + Options for up to 6AWG/16mm² power wires + Full range of backshell options DuraMate™ Features • 3 key-way bayonet design ensures proper mating of connectors • High density signal and mixed power insert configurations IP69K • Operating temperature range: -55°C to +125°C • High-strength, impact resistant & lightweight thermoplastic housings • Low-insertion force stamped terminals offer improved manufacturing efficiencies • Environmentally-sealed and engineered rapid and secure mating system achieves IP67/IP69K protection (in mated condition) from ingress of dust, water, mud and other contaminants and is vibration resistent • Sealing features consisting of durable high-temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels • Backshells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges • Wire entry sealing available in four separate ranges for discrete wire applications • Wide Thread Adapters (WTA) provides an enhanced threading for use with our wide variety of screw-on or clamshell backshells • Smooth Ring Adapters (SRA) are designed for use without backshells for a smaller footprint • Utilizes A Series™ standard contact system (Stamped & Formed or Machined) IP68 DuraMate™ AHDP ISOBUS 91 Series - Material & Performance Specifications Size 8, 60A Current Rating per Contact Size 12, 25A Size 16, 13A Operating Temperature -55°C to +125°C Current Leakage -2mA at 1500 Dielectric Withstanding Voltage VAC Degree of Protection IP67/69K (in mated condition) Mating Cycle Durability 100 Cycles Housing Material Thermoplastic Insulation Insert Thermoplastic Seal Silicone Rubber Contact A Series™ Common System Compliance RoHS Standard products. Custom solutions Customer Service +1 800 394 7732 Updated 06/2022 www.amphenol-sine.com 8 of 22 www.amphenol-sine.com DuraMate™ AHDP ISOBUS 91 Series - Insert Arrangements Size 24 24-09 2 Size 8, 2 Size 12, 5 Size 16 Contact Legend (Size/Max. Current) 8/60A 6AWG Normal 8/60A 8-10AWG 12/25A 16/13A Reduced DuraMate™ AHDP ISOBUS 91 Series - Recommended Wire Insulation Overall Diameter (OD) Contact Size Typical Wire Range Normal Seal Reduced Seal Reduced Seal for 6AWG/16mm² (Size 8 Contacts Only) 6.50-7.42mm (0.256-0.292”) 8 6-10AWG (5.0-16.0mm²) 4.83-6.10mm (0.190-0.240”) 3.43-5.59mm (0.135-0.220") 12 10-14AWG (6.0 2.0mm²) 3.40-4.32mm (0.134-0.170”) 2.46-4.01mm (0.135-0.158") 2.46-4.01mm (0.135-0.158") 16 14-20AWG (2.0-0.5mm²) 2.54-3.40mm (0.100-0.134”) 1.35-3.05mm (0.053-0.120") 1.35-3.05mm (0.053-0.120")z DuraMate™ AHDP ISOBUS 91 Series - Backshell Options and Accessory Overview Lockwashers/Panel Nuts/ Rubber Flange Seals Protective Caps Wide Variety of Backshell Options Contact Removal Tools Blank Seal Plugs DuraMate™ AHDP ISOBUS 91 Series - Plug & Receptacle Options (Dimensions in mm) Size 24 Plug Size 24 Receptacle Size 24 Plug Size 24 Receptacle Wide Thread Adapter (WTA) Wide Thread Adapter (WTA) Smooth Ring Adapter (SRA) Smooth Ring Adapter (SRA) 38.5mm 41.7mm Ø40.4mm Updated 06/2022 Ø40.1mm 38.8mm 42.0mm Ø37.4mm Ø40.1mm www.amphenol-sine.com 9 of 22 www.amphenol-sine.com DuraMate™ AHDP ISOBUS 91 Series - Standard Plugs Image Contact Size/ Amps Voltage 9 Position, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Normal Diameter Seal (Green), Smooth Ring Adapter (SRA) Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDP06-24-91SN-WTA 9 Position, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Normal Diameter Seal (Green), Wide Thread Adapter (WTA) Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDP06-24-91SR-SRA 9 Position, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Smooth Ring Adapter (SRA) Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDP06-24-91SR-WTA 9 Position, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Wide Thread Adapter (WTA) Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Contact Size/ Amps Voltage Part Number Description AHDP06-24-91SN-SRA AHDP06-24-91SR16-SRA 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Smooth Ring Adapter (SRA), Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications AHDP06-24-91SR16-WTA 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Wide Thread Adapter (WTA), Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications DuraMate™ AHDP ISOBUS 91 Series - Standard Receptacles Image Updated 06/2022 Part Number Description AHDP04-24-91PN-SRA    9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Normal Diameter Seal (Green), Smooth Ring Adapter (SRA) Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDP04-24-91PN-WTA    9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Normal Diameter Seal (Green), Wide Thread Adapter (WTA) Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDP04-24-91PR-SRA 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Smooth Ring Adapter (SRA) Size 8, 60A Size 12, 25A Size 16, 13A 250V www.amphenol-sine.com 10 of 22 www.amphenol-sine.com DuraMate™ AHDP ISOBUS 91 Series - Standard Receptacles, cont. Image Part Number Description AHDP04-24-91PR-WTA 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Wide Thread Adapter (WTA) AHDP04-24-91PR16-SRA 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Smooth Ring Adapter (SRA), Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT60-204-08141-16 contacts for 6AWG/16mm² applications AHDP04-24-91PR16-WTA 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDP ISOBUS 91 Series, Plastic, Reduced Diameter Seal (Blue), Wide Thread Adapter (WTA), Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT60-204-08141-16 contacts for 6AWG/16mm² applications Contact Size/ Amps Voltage Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V DuraMate™ AHDP ISOBUS 91 Series - Backshell Options and Accessories Image Part Number Description Size 24, Backshell, Conduit, Snap Over, Right Angle 90°, DuraMate™ AHDP ISOBUS 91 Series AHDPBS-011-2405 Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-24NUT Adapter Size 24, Backshell, Conduit, Snap Over, Straight 180°, DuraMate™ AHDP ISOBUS 91 Series AHDPBS-010-2405 AHDPBS-0406-001 Updated 06/2022 Note: For use with Wide Thread Adapter (WTA). May also be used on DuraMate™ AHDM with P/N AHDM-BS-24NUT Adapter Size 24, Backshell, Tie Wrap, Wide Thread Adapter (WTA), DuraMate™ AHDP ISOBUS 91 Series Note: For use with Wide Thread Adapter (WTA). AHDPBS-0406-002 Size 24, Backshell, Wide Thread Adapter (WTA), 2 PC, Compression Nut, Cable Diameter Range 14.5mm - 18.0mm, DuraMate™ AHDP ISOBUS 91 Series AHDPBS-0406-003 Size 24, Backshell, Wide Thread Adapter (WTA), 2 PC, Compression Nut, Cable Diameter Range 19.5mm - 24.1mm, DuraMate™ AHDP ISOBUS 91 Series AHDPBS-0406-SM01 Size 24, Backshell, Sealed, Cable Grommet, DuraMate™ AHDP ISOBUS 91 Series AHDC06-24 Size 24, Receptacle Cap, Sealed, DuraMate™ AHDP ISOBUS 91 Series www.amphenol-sine.com 11 of 22 www.amphenol-sine.com DuraMate™ AHDP ISOBUS 91 Series - Backshell Options and Accessories, cont. Image Part Number Description AHDC04-24-PM Size 24, Plug Cap, Sealed, Threaded, DuraMate™ AHDP ISOBUS 91 Series AHDC04-24-PMT Size 24, Plug Cap, w Tether, Threaded, Lock Washer, Sealed, DuraMate™ AHDP ISOBUS 91 Series AHDP24-PN01 Size 24, Panel Nut, DuraMate™ AHDP ISOBUS 91 Series AT14-001-2486 Size 24, Lock Washer, Wave, DuraMate™ AHDP ISOBUS 91 Series AHDP-16-04477 Size 24, Rubber Flange Seal, DuraMate™ AHDP ISOBUS 91 Series A114018 Size 8, Blank Seal Plug A114017 Size 12/16, Blank Seal Plug AT13-217-1605 Size 16, Locking Seal Plug AT11-310-1605 Size 16, Contact Removal Tool, Light Blue, 16-20AWG AT11-337-1205 Size 12 , Contact Removal Tool, Orange, 12-14AWG AT11-001-3.6M Size 8, Contact Removal Tool, Black, 7-10AWG AT114008 Size 8, Contact Removal Tool, Green, 8-10AWG AT60-204-08141-16 AT62-203-08141-16 Updated 06/2022 Size 8, 6AWG/16mm² Wire Range, Contact, Pin, Nickel-plated Note: Refer to Plug/Receptacle datasheets for a complete list of available contacts Size 8, 6AWG/16mm² Wire Range, Contact, Socket, Nickel-plated Note: Refer to Plug/Receptacle datasheets for a complete list of available contacts www.amphenol-sine.com 12 of 22 www.amphenol-sine.com Dura|Mate AHDM ™ Environmentally-Sealed, Multi-Pin, Heavy-Duty, Metal, Circular Connectors Available in Size 18 with 6 insert arrangements 2, 6, 8, 14, 20 and 21 Available in Size 24 with 13 insert arrangements 7(x2), 9, 16, 18, 19, 21, 23, 27, 29, 31, 35 and 47 The DuraMate™ AHDM environmentally-sealed, multi-pin, heavy duty, metal, circular connector series provides an economical quick-connect bayonet locking system manufactured to withstand the challenges and complexities of harsh environment off-road applications. • 3 key-way bayonet design ensures proper mating of connectors • High density signal and mixed power insert configurations • Operating temperature range: -55°C to +125°C • High current configurations incorporating revolutionary RADSOK® contacts • High strength impact resistant & lightweight zinc-alloy metal housings • Low insertion force stamped terminals offer improved manufacturing efficiencies • Environmentally-sealed and engineered rapid and secure mating system achieves IP68/IP69K protection (in mated condition) from ingress of dust, IP68 IP69K water, mud and other contaminants and is vibration resistant. • Sealing features consisting of durable high temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels • Backshells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges. • Utilizes A Series™ standard contact system (Stamped & Formed or Machined) • Wire entry sealing available in three separate ranges for discrete wire applications • Integrated Wide Threading provides an enhanced threading for use with our wide variety of screw-on or clamshell backshells DuraMate™ AHDM - Material & Performance Specifications Size 4 - 100A Size 8 - 86A Current Rating per Contact Size 12 - 25A Size 16 - 13A Size 20 - 7.5A Operating Temperature -55°C to +125°C Dielectric Withstanding Voltage Current Leakage -2mA at 1500 VAC Degree of Protection IP68/69K (in mated condition) Mating Cycle Durability 100 Cycles Housing Material Zinc-Alloy Insulation Insert Thermoplastic Seal Silicone Rubber Contact A Series™ Common System Compliance RoHS Standard products. Custom solutions Customer Service +1 800 394 7732 Updated 06/2022 www.amphenol-sine.com 13 of 22 www.amphenol-sine.com DuraMate™ AHDM - Insert Arrangements (1) C030 - 6 Position/2 Used (Size 4); (4) CL22 - 7 Position Alt Construction) Size 18 Size 18 Size 18 Size 18 Size 18 Size 18 18-06 (1) 2 Size 4 18-06 2 Size 4, 4 Size 16 18-08 8 Size 12 18-14 14 Size 16 18-20 2 Size 16, 18 Size 20 18-21 21 Size 20 Contact Legend (Size/Max. Current) R 4+/100A 4/100A Normal Normal Normal Reduced Normal Reduced Normal Reduced 8/86A 8/60A RADSOK® 12/25A 16/13A 20/7.5A Normal Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 Size 24 24-07 1 Size 8 (RADSOK®) 6 Size 12 24-07 (4) 3 Size 4+, 4 Size 16 24-09 1 Size 4, 2 Size 8 6 Size 12 24-16 16 Size 12 24-18 1 Size 8, 3 Size 12 14 Size 16 24-19 6 Size 12, 13 Size 16 24-21 4 Size 12, 17 Size 16 24-23 23 Size 16 24-27 4 Size 12, 23 Size 16 24-29 4 Size 12, 19 Size 16 6 Size 20 Normal Normal Reduced Normal Normal Reduced Reduced Size 24 Size 24 Size 24 24-31 31 Size 16 24-35 3 Size 16, 32 Size 20 24-47 5 Size 16, 42 Size 20 Reduced Reduced R Reduced Thin Normal Reduced Normal Reduced Reduced Reduced Normal Reduced DuraMate™ AHDM - Recommended Wire Insulation Overall Diameter (OD) 4+ contact is only available for 24-07CL22 Contact Size Typical Wire Range Normal Seal Thin Seal 4+ 4AWG (25.0-21.0mm²) 7.9-10.67mm (0.311-0.420") - - Reduced Seal (See datasheets) - 4 6AWG (16.0-13.0mm²) 6.63-7.41mm (0.261-0.292") - 6.63-7.41mm (0.261-0.292") - 8 8-10AWG (10.0-5.0mm²) 4.83-6.10mm (0.190-0.240") - 3.43-5.59mm (0.135-0.220") - 12 10-14AWG (6.0 2.0mm²) 3.43-4.32mm (0.1350-.170") - 2.46-4.01mm (0.135-0.158") 2.46-4.01mm (0.135-0.158") 16 14-20AWG (2.0-0.5mm²) 2.54-3.40mm (0.100-0.134") 2.23-2.69mm (0.088-.106”) 1.35-3.05mm(0.053-0.120") 1.35-2.62mm (0.053-0.103") 20 16-22AWG (1.5-0.35mm²) 1.02-2.41mm (0.040-.095") - 1.02-02.41mm (0.040-0.095") 1.02-2.10mm (0.040-0.083") DuraMate™ AHDM - Backshell Options and Accessory Overview Protective Caps Lockwashers/Nuts Adapter for Conduit, Snap-Over, Backshell 90°/180° Blank Seal Plugs Wide Variety of Backshell Options Contact Removal Tools Updated 06/2022 www.amphenol-sine.com 14 of 22 www.amphenol-sine.com DuraMate™ AHDM - Plug & Receptacle Options (Dimensions in mm) Size 18 Standard Plug Size 18 Standard Receptacle Size 24 Standard Plug Size 24 Standard Receptacle Integrated Wide Threading Integrated Wide Threading Integrated Wide Threading Integrated Wide Threading 37.8mm 41.5mm 38.5mm Ø44.6mm Ø42.3mm 41.5mm Ø47.8mm Ø50.8mm DuraMate™ AHDM - Backshell Options and Accessories Image Updated 06/2022 Part Number Description AHDMBS-24-002 Size 24, Backshell, 2 PC, DuraMate™ AHDM AHDMBS-18-002 Size 18, Backshell, 2 PC, DuraMate™ AHDM AHDMBS-24-001 Size 24, Backshell, Tie Wrap, End Bell, DuraMate™ AHDM AHDMBS-18-001 Size 18, Backshell, Tie Wrap, End Bell, DuraMate™ AHDM AHDMBS-24-059 Size 24, Backshell, w Cable Clamp, DuraMate™ AHDM AHDMBS-18-059 Size 18, Backshell, w Cable Clamp, DuraMate™ AHDM AHDMBS-24-SM01 Size 24, Backshell, Metal, DuraMate™ AHDM AHDMBS-18-SM01 Size 18, Backshell, Metal, DuraMate™ AHDM AHDM-BS-24NUT Size 24, Adapter for use with: AHDPBS-010-2405 AHDP Backshell, Conduit, Snap-Over, Straight 180 AHDPBS-011-2405 AHDP Backshell, Conduit, Snap-Over, Right Angle 90 AHDM-BS-18NUT Size 18, Adapter for use with: AHDPBS-015-1805 AHDP Backshell, Conduit, Snap-Over, Straight 180 AHDPBS-016-1805 AHDP Backshell, Conduit, Snap-Over, Right Angle 90 AHDC34-24 Size 24, Protective Cap for Plug, DuraMate™ AHDM AHDC34-18 Size 18, Protective Cap for Plug, DuraMate™ AHDM AHDC36-24 Size 24, Protective Cap for Receptacle, DuraMate™ AHDM AHDC36-18 Size 18, Protective Cap for Receptacle, DuraMate™ AHDM A112264 Size 24, Lockwasher, DuraMate™ AHDM A114021 Size 18, Lockwasher, DuraMate™ AHDM www.amphenol-sine.com 15 of 22 www.amphenol-sine.com DuraMate™ AHDM - Backshell Options and Accessories, cont. Image Updated 06/2022 Part Number Description A112263-90 Size 24, Nut, DuraMate™ AHDM A114020-90 Size 18, Nut, DuraMate™ AHDM A114019 Size 4, Blank Seal Plug A114018 Size 8, Blank Seal Plug A114017 Size 12/16, Blank Seal Plug AT13-217-1605 Size 16, Locking Seal Plug AT13-204-2005 Size 20, Blank Seal Plug AT11-027-0405 Size 4+, Contact Removal Tool, 4AWG AT114009 Size 4, Contact Removal Tool, 6AWG AT11-001-3.6M Size 8, Contact Removal Tool, 7-10AWG AT114008 Size 8, Contact Removal Tool, 8-10AWG AT11-337-1205 Size 12 , Contact Removal Tool, 12-14AWG AT11-310-1605 Size 16, Contact Removal Tool, 16-20AWG AT11-240-2005 Size 20, Contact Removal Tool, 20-22AWG www.amphenol-sine.com 16 of 22 www.amphenol-sine.com Dura Mate AHDM/AHDBM ISOBUS 91 Series ™ Environmentally-Sealed, Multi-Pin, Heavy-Duty, Metal Circular ISOBUS Connectors AHDBM Circular Bayonet Breakaway-Ready Receptacle Available in Size 24, 9 Position Amphenol Sine Systems’ DuraMate™ AHDM/AHDBM ISOBUS 91 Series of environmentally-sealed, multi-pin, heavy-duty, circular metal plugs (AHDM) and breakaway metal (AHDBM) plugs & receptacles provide an economical, quick-connect, bayonet locking system designed to meet ISO 11783 standards (for control and communications between tractors, implements and software) and withstand the challenges and complexities of harsh environment, off-road, agricultural applications. AHDM Circular Bayonet Standard Plug AHDBM Circular Bayonet Breakaway Plug Key ISOBUS 91 Series Features + One-to-one alternative for all HD30/HDB36 parts + Compatible to other industry standard (Circular Bayonet) versions while retaining full breakaway functionality + AHDM 91 Series Plugs have a jumper (bridged contacts) between Pin 4 & 5 + AHDM/AHDBM 91 Series Receptacles don’t have a jumper (bridged contact) + Options for up to 16mm² power wires + Full range of backshell options Important • AHDBM 91 Series Plugs are intermateable to other industry standard versions and allow full breakaway functionality if used with suitable breakaway-ready Receptacles (like AHDBM 91 Receptacles) • AHDM 91 Series Plugs are intermateable to other industry standard versions but do not retain breakaway functionality • AHDBM 91 Series Receptacles (Circular Bayonet) are intermateable to other industry standard plugs and allow breakaway functionality when used with a breakaway Plugs (like AHDBM 91 Plugs) • Available upon request and not shown on this flyer: AHDM 91 Series Receptacles (Drop Shaped Bayonet) are not intermateable to all industry standard versions and do not retain breakaway functionality DuraMate™ Features • 3 key-way bayonet design ensures proper mating of connectors • High density signal and mixed power insert configurations • Operating temperature range: -55°C to +125°C IP69K • High-strength, impact resistant & lightweight zinc-alloy metal housings • Low-insertion force stamped terminals offer improved manufacturing efficiencies • Environmentally-sealed and engineered rapid and secure mating system achieves IP67/IP69K protection (in mated condition) from ingress of dust, water, mud and other contaminants and is vibration resistent • Sealing features consisting of durable high-temperature silicone provide barrier from lubricating oils, hydraulic fluids and fossil fuels • Backshells maintain a compression-fit design to resist maximum pull-out forces and facilitate strain-relief for jacketed cable ranges • Wire entry sealing available in four separate ranges for discrete wire applications • Integrated Wide Threading provides an enhanced threading for use with our wide variety of screw-on or clamshell backshells • Utilizes A Series™ standard contact system (Stamped & Formed or Machined) IP68 Standard products. Custom solutions Customer Service +1 800 394 7732 Updated 06/2022 www.amphenol-sine.com 17 of 22 www.amphenol-sine.com DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Material & Performance Specifications Current Rating per Contact Operating Temperature Dielectric Withstanding Voltage Degree of Protection Mating Cycle Durability Size 8, 60A; Size 12, 25A; Size 16, 13A Housing Material -55°C to +125°C Insulation Insert Current Leakage-2mA at 1500 VAC Seal IP67/69K (in mated condition) Contact 100 Cycles Compliance Zinc-alloy/Aluminum-alloy Thermoplastic Silicone Rubber A Series™ Common System RoHS DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Insert Arrangements Size 24 24-09 2 Size 8, 2 Size 12, 5 Size 16 Contact Legend (Size/Max. Current) 8/60A 6AWG Normal 8/60A 8-10AWG 12/25A 16/13A Reduced DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Recommended Wire Insulation Overall Diameter (OD) Contact Size Typical Wire Range Normal Seal Reduced Seal Reduced Seal for 6AWG/16mm² (Size 8 Contacts Only) 8 6-10AWG (5.0-16.0mm²) 4.83-6.10mm (0.190-0.240”) 3.43-5.59mm (0.135-0.220") 6.50-7.42mm (0.256-0.292”) 12 10-14AWG (6.0 2.0mm²) 3.40-4.32mm (0.134-0.170”) 2.46-4.01mm (0.135-0.158") 2.46-4.01mm (0.135-0.158") 16 14-20AWG (2.0-0.5mm²) 2.54-3.40mm (0.100-0.134”) 1.35-3.05mm (0.053-0.120") 1.35-3.05mm (0.053-0.120") DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Backshell Options and Accessory Overview Protective Caps Lockwashers/Nuts Adapter for Conduit, Snap-Over, Backshell 90°/180° Blank Seal Plugs Wide Variety of Backshell Options Contact Removal Tools DuraMate™ AHDM ISOBUS 91 Series - Plug & Receptacle Options (Dimensions in mm) Size 24 Plug Size 24 Breakaway Plug Integrated Wide Threading Integrated Wide Threading Updated 06/2022 Integrated Wide Threading 41.5mm 37.8mm 37.8mm Ø36.3mm Size 24 Breakaway Receptacle Ø36.3mm Ø40.1mm www.amphenol-sine.com 18 of 22 www.amphenol-sine.com DuraMate™ AHDM ISOBUS 91 Series - Standard Plugs Image Contact Size/ Amps Voltage 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDM06-24-91SN-059 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading, Cable Clamp Backshell Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDM06-24-91SR 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDM06-24-91SR-059 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Contact Size/ Amps Voltage Part Number Description AHDM06-24-91SN AHDM06-24-91SR16 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications AHDM06-24-91SR16-059 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications DuraMate™ AHDBM ISOBUS 91 Series - Breakaway Plugs Image Updated 06/2022 Part Number Description AHDBM06-24-91SN    9 Pos, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM06-24-91SN-059 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading, Cable Clamp Backshell, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM06-24-91SR 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V www.amphenol-sine.com 19 of 22 www.amphenol-sine.com DuraMate™ AHDBM ISOBUS 91 Series - Breakaway Plugs, cont. Image Part Number Description AHDBM06-24-91SR-059 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell, Breakway-Ready AHDBM06-24-91SR16 9 Pos, Kit, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell, Breakaway, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications AHDBM06-24-91SR16-059 9 Pos, Plug, Socket, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Breakaway, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT62-203-08141-16 contacts for 6AWG/16mm² applications Contact Size/ Amps Voltage Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Contact Size/ Amps Voltage DuraMate™ AHDBM ISOBUS 91 Series - Breakway-Ready Receptacles Image Part Number Description AHDBM04-24-91PN 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM04-24-91PN-059 9 Pos, Kit, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Normal Diameter Seal (Green), Integrated Wide Threading, Cable Clamp Backshell, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM04-24-91PR 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM04-24-91PR-059 9 Pos, Kit, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell, Breakway-Ready Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V Size 8, 60A Size 12, 25A Size 16, 13A 250V AHDBM04-24-91PR16 9 Pos, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Breakway-Ready, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT60-204-08141-16 contacts for 6AWG/16mm² applications AHDBM04-24-91PR16-059 9 Pos, Kit, Receptacle, Pin, Size 24, DuraMate™ AHDBM ISOBUS 91 Series, Metal, Reduced Diameter Seal (Blue), Integrated Wide Threading, Cable Clamp Backshell, Breakway-Ready, Size 8 Contact, 6AWG/16mm² Wire Seal Note: Use AT60-204-08141-16 contacts for 6AWG/16mm² applications Updated 06/2022 www.amphenol-sine.com 20 of 22 www.amphenol-sine.com DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Backshell Options and Accessories Image Updated 06/2022 Part Number Description AHDMBS-24-002 Size 24, Backshell, 2 PC, DuraMate™ AHDM/AHDBM ISOBUS 91 Series AHDMBS-24-001 Size 24, Backshell, Tie Wrap, End Bell, DuraMate™ AHDM/AHDBM ISOBUS 91 Series AHDMBS-24-059 Size 24, Backshell, w Cable Clamp, DuraMate™ AHDM/AHDBM ISOBUS 91 Series AHDMBS-24-SM01 Size 24, Backshell, Metal, DuraMate™ AHDM/AHDBM ISOBUS 91 Series AHDM-BS-24NUT Size 24, Adapter for use with: AHDPBS-010-2405 AHDP Backshell, Conduit, Snap-Over, Straight 180 AHDPBS-011-2405 AHDP Backshell, Conduit, Snap-Over, Right Angle 90 AHDC34-24 Size 24, Protective Cap for Plug, DuraMate™ AHDM/AHDBM ISOBUS 91 Series AHDC36-24 Size 24, Protective Cap for Receptacle, DuraMate™ AHDM/AHDBM ISOBUS 91 Series A112264 Size 24, Lockwasher, DuraMate™ AHDM/AHDBM ISOBUS 91 Series A112263-90 Size 24, Nut, DuraMate™ AHDM/AHDBM ISOBUS 91 Series A114018 Size 8, Blank Seal Plug A114017 Size 12/16, Blank Seal Plug AT13-217-1605 Size 16, Locking Seal Plug AT11-310-1605 Size 16, Contact Removal Tool, Light Blue, 16-20AWG www.amphenol-sine.com 21 of 22 www.amphenol-sine.com DuraMate™ AHDM/AHDBM ISOBUS 91 Series - Backshell Options and Accessories, cont. Image Part Number Description AT11-337-1205 Size 12 , Contact Removal Tool, Orange, 12-14AWG AT11-001-3.6M Size 8, Contact Removal Tool, Black, 7-10AWG AT114008 Size 8, Contact Removal Tool, Green, 8-10AWG AT60-204-08141-16 AT62-203-08141-16 Size 8, 6AWG/16mm² Wire Range, Contact, Pin, Nickel-plated Note: Refer to Plug/Receptacle datasheets for a complete list of available contacts Size 8, 6AWG/16mm² Wire Range, Contact, Socket, Nickel-plated Note: Refer to Plug/Receptacle datasheets for a complete list of available contacts For more information, contact: Customer Service, +1 800 394 7732, csr@amphenol-sine.com © 2018 Amphenol Sine Systems Corporation, 44274 Morley Drive, Clinton Township MI 48036 USA. www.amphenol-sine.com. Customer Service +1 800 394 7732 Every effort has been made to ensure that the information contained in this document is accurate at the time of publication. Specifications or information stated in this document are subject to change without notice. Updated 06/2022 www.amphenol-sine.com 22 of 22