AHDP06-24-91S-BS3-K16X

8 6 7 5 4 2 3 F 1 Polzahl number of contacts 2+2+4+1 Kontakte contacts 2x Size 8 2x Size 12 4x Size 16 1x Size 16 überbrückt / bridged F Bemessungsspannung (DIN EN 60664-1) 24VDC Rated voltage (DIN EN 60664-1) 2x45A (6mm²) 2x60A (10mm²) 2x75A (16mm²) Strombelastbarkeit bei +40°C (alle Kontakte belastet) Current carrying capacity at 40°C (all contacts under load) 2x15A (2,5mm²) 4x5A (0,5mm²) Max. Strombelastbarkeit 0,3 E 48,4 0,3 41 für Wellschlauch NW23 for corrugated pipe NW23 D 140 Wellschlauchadapter corrugated pipe adapter Beutel beinhaltet folgende Einzelteile: Packaging includes following single parts: 2x50A (6mm²) / 2x70A (10mm²) / 2x80A (16mm²) 2x25A (2,5mm²) der Kontakte bei +40°C max. current carrying capacity of contacts at +40°C Verschmutzungsgrad Pollution degree Temperaturbereich Temperature range Schutzgrad protection class Mechanische Lebensdauer Mechanical operations Werkstoff Dichtungen material gaskets Werkstoff Gehäuse material housing Werkstoff Kontaktträger material housing Werkstoff Wellrohradapter material corrugated pipe adapter Werkstoff Kontakte + Oberfläche material contacts + surface Verriegelung locking E 3 -40°C bis +125°C -40°F up to +257°F IP67 / IP6K9K (gesteckt) IP67 / IP6K9K (mated) >100 Steckzyklen >100 mating cycles NBR, Silikon NBR, silicone Polyamid schwarz, UL94V-0 D polyamide black, UL94V-0 Polyamid schwarz, UL94V-0 polyamide black, UL94V-0 Polyamid schwarz, UL94V-0 polyamide black, UL94V-0 Kupferlegierung, vernickelt copper alloy, nickel plated Bajonett Bayonet Stecker nach ISO 11783-2 connector acc. to ISO 11783-2 C C Version frei konfektionierbar mit Wellschlauchadapter (Wellschlauch wird nicht mitgeliefert) version free assembly with corrugated pipe adapter (corrugated pipe not included) Endhülse end ferrule Kontakte bitte separat bestellen / Please order contacts separately: Buchseneinsatz komplett (Kontakt Pin 5 vormontiert) Size 8 (2x benötigt / 2x needed): female insert assembled (contact pin 5 pre-assembled) 6mm² - VN02 036 0026 6 10mm² - VN02 036 0027 6 16mm² - VN02 036 0028 6 Crimpausrüstung siehe Montageanleitung - N 22 000 0028 (6mm²) - N 22 000 0029 (10mm²) - N 22 000 0030 (16mm²) equipment for crimping according to assembly instruction - N 22 000 0028 (6mm²) - N 22 000 0029 (10mm²) - N 22 000 0030 (16mm²) B Size 12 (2x benötigt / 2x needed): gestanzt / stamped (AWG 12-14): AT62-12-0166 (nickel plated) / AT62-12-0144 (gold plated) gedreht / turned (AWG 12-14): AT62-203-12141 (nickel plated) / AT62-210-1231 (gold plated) Size 16 (4x benötigt / 4x needed): gestanzt / stamped (0,34-0,5mm²): AT62-16-0822 (nickel plated) / AT62-16-0844 (gold plated) gestanzt / stamped (AWG 18-20): AT62-16-0622 (nickel plated) / AT62-16-0644 (gold plated) gedreht / turned (AWG 16-20): AT62-201-16141 (nickel plated) / AT62-201-1631 (gold plated) B A Weitere Kontakte auf Anfrage / other contacts on request Alle technischen Daten wurden unter Laborbedingungen ermittelt und können im Praxisbetrieb abweichen. Es handelt sich bei den Angaben weder um Beschaffenheits- noch um Haltbarkeitsgarantien. All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding particulary the information does not constitute or provide any legal guarantees ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). 8 7 6 5 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. 4 Zul. Abw./Tolerances : ISO 2768-c Bagatelle change: Gez. Maßstab / Scale : 1:1 12.07.2019 SWAHL 26.02.2018 RSCHÄ 21.04.2017 RSCHÄ Datum/Date Name CUSTOMER DRAWING DIN / ISO 13715 26.10.2016 Drawn RSCHAEDEL Status Released Gepr. 18.07.2019 Checked MGRIMM 03 201900126 02 201700501 01 201500766 Index Änderung/Description A2 FAI2019-000728 A Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. Prüfmaß / Testdimension Teileindex / Partindexnumber: Kabeldose female cable connector Amphenol Tuchel Industrial GmbH M Blatt/Sheet AHDP06-24-91S-BS3 Ers. f. / Replacement for : 1 1 Bl. NXM-V02 Gewicht (errechnet) / Calc WT : AT Series™ - Contact Size 16 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed Part Number Description AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT60-16-0644 AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed Machined AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Tooling - Machined Contacts Part Part Number CA-5D12 Description Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) Tooling - Stamped & Formed Contacts Part CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number ATRT-100 AT11-310-1605 A114017 Description Used for removal of contacts for A Series™ products Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) Contact Removal Tool, Plastic, Size 16 Sealing Plug, Size 16, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021 MagnaMate™ ATHP - DuraMate™ AHDP - DuraMate™ AHDM Series - Contact Size 12 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Size AWG Type Part Number Description Size AWG Type AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed Part Number Description DiagnosticGrade™ Machined Contacts, Sockets & Pins • Smaller AWG for Diagnostic Applications • Gold-plated • Increased Mating Cycles • Cost-effective Part Number Description 65-54749 AT62-210-1231-1820 Size AWG Type Male Contact - DiagnosticGrade™, Pin, Gold-plated 12 20 Machined Female Contact - DiagnosticGrade™, Socket, Gold-plated 12 20 Machined Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3973 Crimp Die - Size 12 (S&F contacts only) MFX-3985 Crimp Die - Size 12 (S&F contacts only) 10-12AWG -02XX Series ATT-12-00 Hand Crimp Tool - Size 12, 12AWG (S&F contacts only) ATT-12-01 Hand Crimp Tool - Size 12, 10AWG (S&F contacts only) Tooling - Machined Contacts Part Part Number Description CA-5D12 Universal Hand Crimp Tool, Size 12/16/20 (Machined contacts only) CA-5E12 Pneumatic Crimp Tool, Size 12/16/20 (Machined contacts only) Contact Removal Tools Part Part Number AT11-337-1205 A114017 Description Contact Removal Tool, Plastic, Size 12 Sealing Plug, Size 12, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 01/2022 3 2 1 D B 7,4 17,5 C 4,6 30,75 3,5 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. 4 Material: Kupferlegierung material: copper alloy Oberfläche: vernickelt surface coating: nickel plated Für Kontaktstift 3,6mm for male contact 3,6mm Anschlussquerschnitt: 6mm² cross section: 6mm² 100 100 Rille 1 groove 1 Stück in einem Beutel verpackt pcs packed in one poly bag Alle technischen Daten wurden unter Laborbedingungen ermittelt und können im Praxisbetrieb abweichen. Es handelt sich bei den Angaben weder um Beschaffenheits- noch um Haltbarkeitsgarantien. All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guarantees ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). Prüfmaß / Testdimension Teileindex / Partindexnumber: Zul. Abw./Tolerances : ISO 2768-mH Bagatelle change: Gez. Maßstab / Scale : 2:1 A4 CUSTOMER DRAWING DIN / ISO 13715 FAI2019-000902 Gewicht (errechnet) / Calc WT : 30.03.2017 04 201900099 Drawn AZN_NPFEIFFE Status Released Gepr. 01.04.2019 01.04.2019 MTOLK Checked MGRIMM 03 201800125 02 201800066 01 201500766 Index Änderung/Description 01.03.2018 NPFEI 25.01.2018 NPFEI 31.03.2017 NPFEI Datum/Date Name Buchsenkontakt female contact Amphenol Tuchel Industrial GmbH M Blatt/Sheet VN 02 036 0026 6 Ers. f. / Replacement for : 1 1 Bl. NXM-V04 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. A 3 2 1 D B 17,5 7,4 C 5,9 30,75 4,4 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. 4 Material: Kupferlegierung material: copper alloy Oberfläche: vernickelt surface coating: nickel plated Für Kontaktstift 3,6mm for male contact 3,6mm Anschlussquerschnitt: 10mm² cross section: 10mm² 100 100 2 Rillen 2 grooves Stück in einem Beutel verpackt pcs packed in one poly bag Alle technischen Daten wurden unter Laborbedingungen ermittelt und können im Praxisbetrieb abweichen. Es handelt sich bei den Angaben weder um Beschaffenheits- noch um Haltbarkeitsgarantien. All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guarantees ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). Prüfmaß / Testdimension Teileindex / Partindexnumber: Zul. Abw./Tolerances : ISO 2768-mH Bagatelle change: Gez. Maßstab / Scale : 2:1 A4 CUSTOMER DRAWING DIN / ISO 13715 FAI2019-000905 Gewicht (errechnet) / Calc WT : 30.03.2017 04 201900099 Drawn AZN_NPFEIFFE Status Released Gepr. 01.04.2019 01.04.2019 MTOLK Checked MGRIMM 03 201800125 02 201800066 01 201500766 Index Änderung/Description 01.03.2018 NPFEI 25.01.2018 NPFEI 31.03.2017 NPFEI Datum/Date Name Buchsenkontakt female contact Amphenol Tuchel Industrial GmbH M Blatt/Sheet VN 02 036 0027 6 Ers. f. / Replacement for : 1 1 Bl. NXM-V03 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. A 3 2 1 D C B 17,5 7,4 30,75 5,5 Copying of this document and giving it to others and the use or communication of the contents thereof, are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of the utility model or design. 4 Material: Kupferlegierung material: copper alloy Oberfläche: vernickelt surface coating: nickel plated Für Kontaktstift 3,6mm for male contact 3,6mm Anschlussquerschnitt: 16mm² cross section: 16mm² 100 100 3 Rillen 3 grooves Stück in einem Beutel verpackt pcs packed in one poly bag Alle technischen Daten wurden unter Laborbedingungen ermittelt und können im Praxisbetrieb abweichen. Es handelt sich bei den Angaben weder um Beschaffenheits- noch um Haltbarkeitsgarantien. All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding; particulary the information does not constitute or provide any legal guarantees ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). Prüfmaß / Testdimension Teileindex / Partindexnumber: Zul. Abw./Tolerances : ISO 2768-mH Bagatelle change: Gez. Maßstab / Scale : 2:1 A4 CUSTOMER DRAWING DIN / ISO 13715 FAI2019-000907 Gewicht (errechnet) / Calc WT : 30.03.2017 04 201900099 Drawn AZN_NPFEIFFE Status Released Gepr. 01.04.2019 01.04.2019 MTOLK Checked MGRIMM 03 201800125 02 201800066 01 201500766 Index Änderung/Description 01.03.2018 NPFEI 25.01.2018 NPFEI 31.03.2017 NPFEI Datum/Date Name Buchsenkontakt female contact Amphenol Tuchel Industrial GmbH M Blatt/Sheet VN 02 036 0028 6 Ers. f. / Replacement for : 1 1 Bl. NXM-V03 Weitergabe sowie Vervielfältigung dieser Unterlage, Verwertung und Mitteilung ihres Inhalts nicht gestattet, soweit nicht ausdrücklich zugestanden. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle Rechte für den Fall der Patenterteilung oder Gebrauchsmuster-Eintragung vorbehalten. A