AIPXE-5X650A-E017

REVISIONS REV CIRCUIT BOARD HOLE LOCATIONSBOARD HOLE ASSEMBLED HEADER SHOWN FOR REFERENCE LOCATIONS ECO DESCRIPTION A1 AND KEEP CLEAR AREAS FORKEEP CLEAR NEW RELEASE DATE BY APPR 12DEC2019 ZENIN TOMMY AREAS FOR AT13-12PA-R015,AT13-12PA-GR02 AT13-24PAB-BM03,AT13-24PAB-BM01 AT13-36PABC-BM03,AT13-36PABC-BM01 AT13-48PABCD-BM03,AT13-48PABCD-BM01 BOARD THICKNESS IN KEEP CLEAR ARE TO BE 2.36±0.1 ALL DIMENSIONS REFERENCE TOP VIEW 127.00 BOTTOM SIDE ONLY 2.03 7.62 20.5±0.5 2X HOLE FOR M4 X 8 THREAD FORMING SCREW 144.0±0.7 86.0±0.5 SECTION B-B 21.0±0.5 R3.0 TITLE: 16.00 5.08 LABEL AREA 86.0±0.5 12.5±0.5 4X Ø7.70±0.3 THRU FOR 1/4" OR 6mm FASTENER R3.00 ENCLOSURE A KEEP CLEAR 4X R8.0 165.10 LABEL AREA 2x Ø4.20 FOR M4 X 8 THREAD FORMING SCREW HOLE FOR Ø1.60 PIN TOP SURFACE OF PCB 31.75 8.90 13.35 5.59 96.0±0.5 10.34 26.70 17.80 22.25 96.3±0.5 PCB VENT HOLE INCLUDED ON PART NUMBER AIPXE-5X650A ONLY 4.45 28.78 (201.4) 36.50 59.06 180.5±1.0 70.0±0.7 8.0±0.5 50.0±0.5 VENT HOLE AIPXE-5X650A ONLY POCKET FOR ADHESIVE VENT PATCH (CUSTOMER SUPPLIED) NO-VENT HOLE PART NUMBER AIPXE-5X650B 15.00 24.12 15.0±0.5 41.16 52.9+0.50 -1.50 160.0±1.0 50.28 DWG NO: HEADER SECTION C-C A SECTION A-A 111.76 (160.0) B B 25.20 PART NUMBER CHART (54.9) 2.8±0.2 C C 57.56 31.75 VENT HOLE PART NUMBER WITH VENT HOLES AIPXE-5X650A- E017 WITHOUT VENT HOLES AIPXE-5X650B-E017 AT13-48PABCD-BM03 HEADER SHOWN FOR REFERENCE ONLY SH: 60.95 REV: 20.68 OF: THREE DIMENSIONAL SPACE LIMIT APPROXIMATE INTERNAL SPACE FOR COMPONENT SPACE LAYOUT MAX. COMPONENT HEIGHT UNDER BOARD 4.00 mm. SEE PART NUMBER CHART PART NUMBER DESCRIPTION QUANTITY DRAWN: NOTES: UNLESS OTHERWISE SPECIFIED CHECKED: 1. MATERIAL:NATURAL POLYCARBONATE X 2. THIS ENCLOSURE MATES WITH AT13-*1P*2 -XXXX (EXCEPT AT13-12P*2 -BMXX) HEADERS ( *1=PIN ARR. 12,24,36,48; *2=KEY ARR. A,B,C,D). Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: 3. RoHS COMPLIANT 4. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 3D VIEW AT13-48PABCD-BM03 AND AT13-48PABCD-BM01 HEADER AND MOUNTING HARDWARE SHOWN FOR REFERENCE ONLY PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A1 SHEET 1 OF 1