AIPXE-5X650BP-01

REVISIONS REV ECO A1 118.1±0.5 DESCRIPTION NEW RELEASE DATE BY APPR 28APR2020 ZENIN TOMMY 2X Ø8.2 TITLE: 6.6 143.7±0.5 SEAL 53.8±0.4 DWG NO: 21.8 REV: SH: 1. MATERIAL: THERMOPLASTIC, BLACK 2X Ø3.18±0.12 HOLE RECOMMENDED SCREW [M4.0X8.0] THREAD-FORMING SCREW, TORQUE:10-20IN-LB [1.13-2.25N-m] AIPXE-5X650BP-01 PART NUMBER DESCRIPTION QUANTITY 2. MODIFICATIONS:BLANK PLATE 3. SPECIFICATIONS: 3.1 OPERATING TEMPERATURE: -55°C TO +125°C 3.2 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.3 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 3.4 RoHS COMPLIANT OF: NOTES: UNLESS OTHERWISE SPECIFIED DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: ARMOR IPX, BLANK PLATE FOR AT CUSTOMER: 4. THIS PRODUCT IS USED WITH AIPXE-5X650A-XXXX AND AIPXE-5X650B-XXXX ENCLOSURE (XXXX= ALL MODIFICATIONS) PROCESS SPECIFICATIONS: 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY NEXT ASS'Y: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NONE A1 SHEET 1 OF 2 REVISIONS REV ECO A1 DESCRIPTION NEW RELEASE DATE BY APPR 28APR2020 ZENIN TOMMY 127.00 BOTTOM SIDE ONLY 2.03 5.00 7.62 TITLE: 5.00 16.00 5.08 KEEP CLEAR 165.10 DWG NO: 2x Ø4.20 FOR M4 X 8 THREAD FORMING SCREW 11.75 REV: 3D VIEW AIPXE-5X650A-XXXX AND AIPXE-5X650B-XXXX ENCLOSURE AND MOUNTING HARDWARE SHOWN FOR REFERENCE SH: 5.59 OF: 107.00 AIPXE-5X650BP-01 PART NUMBER DESCRIPTION QUANTITY 118.12 DRAWN: CHECKED: CIRCUIT BOARD HOLE LOCATIONS AND KEEP CLEAR AREAS BOARD THICKNESS IN KEEP CLEAR ARE TO BE 2.36±0.1 MAX. COMPONENT HEIGHT UPSIDE BOARD 25.20 mm. MAX. COMPONENT HEIGHT UNDER BOARD 4.00 mm. ALL DIMENSIONS REFERENCE TOP VIEW X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: ARMOR IPX, BLANK PLATE FOR AT CUSTOMER: PROCESS SPECIFICATIONS: THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE A1 SHEET 2 OF 2