ARC12-70PB

REVISIONS REV ECO A1 DESCRIPTION RELEASE NEW DRAWING DATE BY APPR 12/JUL/22 LOUIE TOMMY 44.6±0.6 126.8±0.6 6.4 CAVITY #1 118.5±0.5 1.5 NORMAL SEAL,RED 4X Ø25 6 TITLE: 4X Ø4.3 8 58.9±0.6 50.6±0.5 36.1 38.9 2X KEYWAY 5 KEY A SHOWN CAVITY #70 M5 x 0.8-6H THREADED INSERT 118.47 108.15 DWG NO: ARC12-70PA SHOWN ONLY 5 ARC12-70PX 3.8 50.57 40.24 2.5 104.0 1.4 REV: NOTES: UNLESS OTHERWISE SPECIFIED 3. SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS 3.2 OPERATING TEMPERATURE: -55°C TO +125°C 3.3 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE @ 1500 VOLTS AC 3.4 INSULATION RESISTANCE: 1000 MEGOHMS MIN @ 25°C 3.5 MOISTURE RESISTANCE: IP68 ( IM OF WATER FOR A PERIOD OF 24 HOURS, MATED CONDITION ); IP69K( MATED CONDITION ) 3.6 MATING CYCLE DURABILITY: 100 CYCLES 3.7 RoHS COMPLIANT 4. MATING PART: ARC16-70SX* PLUG ( X = A,B,C,D KEYS ; * = ALL MODIFICATIONS) 4X Ø23.0 4X Ø4.29 6. CONTACT SIZE AND REAR SEAL WIRE RANGE: CONTACT MIN. INSUL MAX. INSUL TYPICAL SIZE O.D. O.D. WIRE RANGE 16 2.54 mm (.100 in) 3.40 mm (.134 in) SEE SHEET 2 PART NUMBER 14 - 20 AWG (2.0 - 0.5 mm2) 7. RECEPTACLE IS SUPPLIED WITH DUST CAP OF: 2. MODIFICATIONS: FLANGE MOUNT; NORMAL DIA. WIRE SEAL 5. SEE SHEET 2 FOR OTHER KEY ARRANGEMENTS SH: 1. MATERIAL: HOUSING: THERMOPLASTIC, BLACK SEAL: SILICONE RUBBER THREADED INSERT: STAINLESS STEEL DESCRIPTION QUANTITY DRAWN: 8. RECOMMENDED SCREW: 8-32 [ M4 ] TORQUE: 20 - 25 IN-LB [ 2.26 - 2.82 Nm ] CHECKED: 9. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 70 POS, RECEPTACLE, PIN,ARC SERIES, KEYED, NORMAL SEAL,BLACK THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 1 OF 2 REVISIONS REV ECO A1 DESCRIPTION RELEASE NEW DRAWING DATE BY APPR 12/JUL/22 LOUIE TOMMY TITLE: KEY A (2) PLACE KEY B (2) PLACE KEY C (2) PLACE KEY D (2) PLACE DWG NO: ARC12-70PA DRC12-70PA ARC12-70PX VARIANTS ARC12-70PX VARIANTS ARC12-70PX VARIANTS PART NUMBER REF PART NUMBER REF PART NUMBER REF ARC12-70PB DRC12-70PB ARC12-70PC DRC12-70PC ARC12-70PD DRC12-70PD REV: REF ARC12-70PX ARC12-70PX VARIANTS PART NUMBER SH: OF: ARC12-70PX PART NUMBER DESCRIPTION QUANTITY DRAWN: CHECKED: X Sine Systems - www.amphenol-sine.com 44724 Morley Drive Clinton Township, MI 48036 ENGINEER: APPROVAL: MATERIAL SPECIFICATIONS: CUSTOMER: PROCESS SPECIFICATIONS: 70 POS, RECEPTACLE, PIN,ARC SERIES, KEYED, NORMAL SEAL,BLACK THIS DRAWING IS SUPPLIED FOR INFORMATION ONLY. DESIGN FEATURES, SPECIFICATIONS AND PERFORMANCE DATA SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIG HTS OF REPRODUCTION ARE IMPLIED. ALL DIMENSIONS ARE SUBJECT TO NORMAL SCALE: MANUFACTURING VARIATIONS. TYPE DWG NO: B NEXT ASS'Y: NONE SHEET 2 OF 2